EP910PC-30T - 900-Gate Classic EPLD, 30ns, DIP-40 | Intel (Altera)
Référence : EP910PC-30T ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $18.5 | $18,50 |
| 10 | $16.2 | $162,00 |
| 100 | $13.85 | $1 385,00 |
| 500 | $11.4 | $5 700,00 |
| 1 000 | $9.95 | $9 950,00 |
EP910PC-30T Présentation
An EPLD (Erasable Programmable Logic Device) is a type of programmable logic that replaces multiple discrete PAL/GAL devices with a single CMOS IC; in the broader taxonomy it sits between simple PLDs (PAL/GAL) and modern CPLDs/FPGAs as an early high-density, UV-erasable logic family. The Classic family provides densities from 300 to 900 usable gates and propagation delays as low as 10 ns, making it a workhorse for industrial control, glue logic, and bus-interface bridging where modern FPGAs would be over-spec and over-priced.
Key features include 240 product terms across 24 macrocells interconnected by a global programmable interconnect array, 100% TTL-compatible I/O, on-board logic test circuitry for AC verification during production flow, and programming compatibility with the MAX+PLUS II development system. The 'PC' package suffix denotes plastic DIP, while '-30T' indicates the 30 ns speed grade in tube packaging, identical to the commercial EP910PC-30 except for delivery format.
Architecturally the EP910PC-30T uses a PAL-type AND/OR structure with a global bus connecting each macrocell, supported by a 5 V CMOS process that delivers low quiescent power compared to bipolar TTL PLDs. Each macrocell contains an XOR gate, a programmable flip-flop, an output enable, and a feedback path, allowing registered, combinational, and bidirectional I/O configurations within the same device. The Classic family's logic test circuitry allows verification of function and AC specifications during standard production flow.
Typical applications include industrial control glue logic, address decoding and bus interfacing for legacy microprocessors (e.g., 8086, 68000, Z80 systems), state-machine replacement of discrete SSI/MSI logic, custom peripheral controllers in test equipment, and pin-compatible upgrades of older EP310/EP320 designs. It is commonly used to consolidate multiple 16L8/20L8 PALs into a single device, simplifying PCB layout and reducing part count.
When designing with this device, ensure your design tools support the Classic device family (MAX+PLUS II or compatible legacy software). Verify the 30 ns propagation delay meets your timing budget against the slowest clock edge in your system. Plan for end-of-life sourcing: the Classic family is mature and inventory is mostly distributor or aftermarket stock; second-source or upgrade paths should be evaluated for new long-life designs.
This page synthesizes distributor pricing, same-package drop-in alternatives within the EP910 family, and practical design notes not found in the original Altera datasheet, giving engineers a single reference for sourcing and implementing the EP910PC-30T.
Alternatives de remplacement direct pour EP910PC-30T — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec EP910PC-30T (même facteur de forme et même empreinte) — différant par Package, Supply Voltage (VCC), Usable Gates, Mounting Type, Technology.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
EP910PC-30
✅ Remplacement direct✓ En stock
$6.5 / unité
Voir la fiche technique →EP910PC-25
✅ Remplacement direct✓ En stock
$16.92 / unité
Voir la fiche technique →EP910PC-20
✅ Remplacement direct✓ En stock
$12.4 / unité
Voir la fiche technique →EP910PC-20T
✅ Remplacement direct✓ En stock
$8.7 / unité
Voir la fiche technique →EP910PC-15
✅ Remplacement direct✓ En stock
$12.8 / unité
Voir la fiche technique →EP910PC-30T Valeurs maximales et caractéristiques électriques
| Family | Altera Classic EPLD |
| Device | EP910 |
| Usable Gates | 900 |
| Macrocells | 24 |
| Product Terms | 240 |
| Dedicated Inputs | 12 |
| I/O Pins | 24 |
| Propagation Delay (tPD) | 30 ns |
| Maximum Clock Frequency (fCNT) | 33.3 MHz |
| Process Technology | CMOS |
| Tension d'alimentation | 5 V (TTL compatible) |
| Boîtier | PDIP-40 (Plastic DIP) |
| Type de montage | Through-Hole |
| Température de fonctionnement | 0C to +70C (commercial) |
| Logic Compatibility | 100% TTL emulation |
| Programming | MAX+PLUS II / UV-erasable |
Configuration des broches de EP910PC-30T
| Broche 1 | I/O — Macrocell I/O (pin 1) |
| Broche 2 | I/O — Macrocell I/O (pin 2) |
| Broche 3 | I/O — Macrocell I/O (pin 3) |
| Broche 4 | I/O — Macrocell I/O (pin 4) |
| Broche 5 | I/O — Macrocell I/O (pin 5) |
| Broche 6 | I/O — Macrocell I/O (pin 6) |
| Broche 7 | I/O — Macrocell I/O (pin 7) |
| Broche 8 | I/O — Macrocell I/O (pin 8) |
| Broche 9 | I/O — Macrocell I/O (pin 9) |
| Broche 10 | I/O — Macrocell I/O (pin 10) |
| Broche 11 | I/O — Macrocell I/O (pin 11) |
| Broche 12 | I/O — Macrocell I/O (pin 12) |
| Broche 13 | IN — Dedicated input (pin 1) |
| Broche 14 | IN — Dedicated input (pin 2) |
| Broche 15 | IN — Dedicated input (pin 3) |
| Broche 16 | IN — Dedicated input (pin 4) |
| Broche 17 | IN — Dedicated input (pin 5) |
| Broche 18 | IN — Dedicated input (pin 6) |
| Broche 19 | IN — Dedicated input (pin 7) |
| Broche 20 | GND — Ground |
| Broche 21 | IN — Dedicated input (pin 8) |
| Broche 22 | IN — Dedicated input (pin 9) |
| Broche 23 | IN — Dedicated input (pin 10) |
| Broche 24 | IN — Dedicated input (pin 11) |
| Broche 25 | IN — Dedicated input (pin 12) |
| Broche 26 | CLK/IN — Clock input or dedicated input |
| Broche 27 | I/O — Macrocell I/O (pin 13) |
| Broche 28 | I/O — Macrocell I/O (pin 14) |
| Broche 29 | I/O — Macrocell I/O (pin 15) |
| Broche 30 | I/O — Macrocell I/O (pin 16) |
| Broche 31 | I/O — Macrocell I/O (pin 17) |
| Broche 32 | I/O — Macrocell I/O (pin 18) |
| Broche 33 | I/O — Macrocell I/O (pin 19) |
| Broche 34 | I/O — Macrocell I/O (pin 20) |
| Broche 35 | I/O — Macrocell I/O (pin 21) |
| Broche 36 | I/O — Macrocell I/O (pin 22) |
| Broche 37 | I/O — Macrocell I/O (pin 23) |
| Broche 38 | I/O — Macrocell I/O (pin 24) |
| Broche 39 | NC — Not connected (per datasheet) |
| Broche 40 | VCC — 5 V supply voltage |
Applications typiques
EP910PC-30T convient pour 6 applications: Industrial Control Glue Logic, Legacy Microprocessor Bus Interfacing, State-Machine Replacement of Discrete Logic, Address Decoding and Chip-Select Generation, Custom Peripheral Controllers in Test Equipment, Pin-Compatible Upgrade of EP310/EP320 Designs.
Industrial Control Glue Logic
The EP910PC-30T consolidates multiple discrete PAL/GAL devices (e.g., 16L8, 20L8) into a single 24-macrocell chip in factory automation retrofits, reducing PCB part count and assembly cost. Its 30 ns tPD suits state machines and decoders clocked at sub-10 MHz, typical for PLC I/O scan and conveyor control. The PDIP-40 through-hole package survives vibration and thermal cycling common in industrial cabinets. Designers use MAX+PLUS II to integrate address decoding, handshake sequencing, and motor-control interlocks that previously required three to five SSI/MSI packages.
Recommandé
Legacy Microprocessor Bus Interfacing
The EP910PC-30T is widely deployed as a bus-interface bridge between 8086/68000/Z80 microprocessors and modern peripherals in legacy aerospace, military, and medical equipment still in active service. Its 12 dedicated inputs and 24 bidirectional I/O pins cleanly handle 16-bit address decoding plus chip-select generation for memory and I/O banks. The 33.3 MHz fCNT is well above the bus speed of legacy CPUs (8-25 MHz), and the 5 V TTL-compatible I/O eliminates level-shifters when interfacing to vintage peripherals. Drop-in compatibility across speed grades enables straightforward obsolescence management.
Recommandé
State-Machine Replacement of Discrete Logic
The EP910PC-30T replaces 4-8 discrete 74LS/74HC flip-flops, gates, and PALs with a single programmable device implementing custom sequencers in test equipment, instrumentation, and motor controllers. Its 240 product terms comfortably support 20-30 state-transition equations with redundant term allocation, while the 24 macrocells handle both registered outputs (for Q-state feedback) and combinational outputs (for decoded outputs). This consolidation cuts board area by 60-70% and eliminates routing congestion in mixed-signal test instruments.
Recommandé
Address Decoding and Chip-Select Generation
The EP910PC-30T is ideal for memory and I/O address decoding in embedded systems where it generates up to 24 independent chip-select signals from a 16-20 bit address bus. With 24 macrocells and 240 product terms, designers can decode complex memory maps including partial-address overlays, bank-switching, and interrupt acknowledge logic without resorting to cascaded 74LS138 decoders. Its 30 ns tPD adds only modest propagation delay to the chip-select path, well within typical 8/16-bit system timing margins. Through-hole PDIP-40 packaging survives hand-soldering repairs on legacy boards.
Recommandé
Custom Peripheral Controllers in Test Equipment
In test and measurement fixtures, the EP910PC-30T implements custom GPIB/IEEE-488 handshakes, parallel-port bit-banging, and stimulus/response sequencers that don't justify a full microcontroller. Its 100% TTL compatibility interfaces directly to legacy test-bus transceivers, and the programmable I/O direction per macrocell simplifies bidirectional test-pin multiplexing. The 33.3 MHz fCNT handles real-time sampling rates up to several MHz - sufficient for digital-logic-test fixtures and boundary-scan controllers. End-of-life status means new designs should evaluate MAX V or Lattice ispMACH equivalents.
Recommandé
Pin-Compatible Upgrade of EP310/EP320 Designs
The EP910PC-30T serves as a density upgrade for legacy designs originally built around the smaller EP310 (300 gates) or EP320 (600 gates) Classic EPLDs. Its 900 usable gates, 24 macrocells, and 240 product terms provide 3x the logic of the EP310 without any PCB rework when the original design reserved adequate footprint - the EP910 shares the same Classic pinout philosophy in PDIP-40. Designers can thus expand functionality (more registers, wider decoders, additional state-machine states) while preserving the original board layout, an invaluable capability for in-production legacy systems.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour EP910PC-30T — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | EP910PC-30 | EP910PC-25 | EP910PC-20 | EP910PC-20T | EP910PC-15 |
|---|---|---|---|---|---|---|
| Package | PDIP-40 | PDIP-40 - same | PDIP-40 - same | PDIP-40 - same | PDIP-40 - same | PDIP-40 - same |
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Propagation Delay (tPD) | 30 ns | 30 ns | 25 ns (faster) | 20 ns (faster) | 20 ns (faster) | 15 ns (fastest) |
| Usable Gates | 900 | 900 | 900 | 900 | 900 | 900 |
| Macrocells | 24 | 24 | 24 | 24 | 24 | 24 |
| Product Terms | 240 | 240 | 240 | 240 | 240 | 240 |
| Max Clock Frequency | 33.3 MHz | 33.3 MHz | 40 MHz | 50 MHz | 50 MHz | 62.5 MHz |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Delivery Format | Tube | Tape & Reel / Tray | Tube (default) | Tube (default) | Tube | Tube (default) |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Principaux différenciateurs
- Most widely stocked EP910 speed grade in PDIP-40 (vs EP910PC-25 / EP910PC-20 / EP910PC-15)
- Tube-delivery format ideal for low-volume through-hole assembly (vs EP910PC-30 (tape & reel))
- Full Classic EPLD feature set at lowest 2026 market price (vs EP910PC-25)
Notes de conception
Do not substitute a slower speed grade (e.g., EP910PC-30T) into a design originally timing-budgeted for a faster grade (e.g., EP910PC-25 or EP910PC-20) without re-running static timing analysis. The 30 ns grade's 17-50% longer tPD will cause setup-time violations in paths that previously had small positive slack. Conversely, a faster grade can always replace a slower grade provided the silicon revision matches; verify lot-traceability when sourcing for medical/aerospace systems.
Use a DIP-40 socket (e.g., Aries 40-pin machined-pin) for prototyping - this allows rapid swap of speed grades and re-programming during design iteration. For production through-hole boards, ensure the EP910PC-30T is oriented with the pin-1 notch matching the silkscreen. Decoupling: place one 0.1 uF ceramic + one 10 uF electrolytic within 5 mm of the VCC pin (40) and GND pin (20); the EP910's high-speed CMOS output switching can inject significant supply noise without proper bypassing.
The EP910PC-30T outputs drive 5 V TTL loads directly; for fan-out above 20 LSTTL loads, buffer with 74LS244 or 74F244. Output edge rates are approximately 3-5 ns (TTL-compatible), so transmission-line effects are negligible on boards under 30 cm with standard 0.65 mm traces, but stripline impedance should be calculated for backplane designs above 50 MHz. The 24 macrocell outputs are individually programmable for registered, combinational, or bidirectional operation, simplifying mixed I/O designs.
Informations de conformité
Classic EPLD family pre-dates RoHS directive; PDIP-40 lead-frame is SnPb finish. Not AEC-Q100 qualified (industrial/automotive grade unavailable). For RoHS-compliant rebuilds, use ceramic or modern MAX-series CPLDs.
