FGH200MAAM2 - Wi-Fi HaLow 802.11ah Module 850-950MHz | Quectel
Référence : FGH200MAAM2 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1 000 | $0 | $0,00 |
FGH200MAAM2 Présentation
Wi-Fi HaLow is an open, standard-based Wi-Fi technology defined by IEEE 802.11ah that operates in the sub-1 GHz spectrum. Unlike conventional 2.4 GHz and 5 GHz Wi-Fi, sub-1 GHz propagation offers substantially greater range and better penetration through walls and other obstacles, making the technology a direct member of the broader low-power wide-area network (LPWAN) family that competes with LoRaWAN and proprietary sub-GHz radios while retaining native IP connectivity and standard Wi-Fi security.
Key features of the FGH200MAAM2 include long-range transmission, low power consumption, large network capacity, and strong penetration performance. The module supports robust security with AES encryption and the SHA-256, SHA-384, and SHA-512 hashing families, together with modern Wi-Fi Protected Access protocols including WPA3 and OWE (Opportunistic Wireless Encryption). It is based on the Morse Micro MM8108 Wi-Fi HaLow SoC, an upgraded platform succeeding the MM6108-based FGH100M generation.
Architecturally, the FGH200M integrates the MM8108 SoC with RF front-end circuitry, power management, and clocking in a single castellated/LGA land-pattern module, allowing designers to treat the entire sub-GHz RF chain as a certified, pre-tested building block. Quectel states the compact footprint optimizes end-product size and reduces design cost, fully meeting the demands of size-sensitive applications. According to Quectel, the MM8108-based platform supports large-capacity networks of up to 8191 associated IoT devices per access point.
Typical applications include smart utility metering, industrial IoT sensor networks, smart-city infrastructure, agricultural monitoring, building automation, and security cameras deployed over long distances where conventional Wi-Fi cannot reach and cellular connectivity is too costly or power-hungry.
A key design consideration is antenna selection: the FGH200MAAM2 variant ships without an antenna (antenna not included), so RF performance depends heavily on a well-matched external antenna and careful RF layout on the host PCB.
This page synthesizes distributor availability data, the manufacturer product page, and drop-in alternative analysis not found in the manufacturer datasheet, with pricing referenced as of 2026-10-20.
Alternatives de remplacement direct pour FGH200MAAM2 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec FGH200MAAM2 (même facteur de forme et même empreinte) — différant par Antenna, Encryption.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
FGH200MAAMD
✅ Remplacement direct✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →FGH200MAAM2
✅ Remplacement direct✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →FGH200MAAM2 Spécifications (publiées par le fabricant)
| Product Type | Wi-Fi HaLow transceiver module |
| Wireless Standard | IEEE 802.11ah (Wi-Fi HaLow) |
| Frequency Band | 850 MHz to 950 MHz |
| Core SoC | Morse Micro MM8108 |
| Encryption | AES, WPA3, OWE |
| Hash Algorithms | SHA-256, SHA-384, SHA-512 |
| Key Characteristics | Long-range transmission, low power consumption, large capacity, good penetration |
| Package Dimensions | 11.0 mm x 10.0 mm x 2.0 mm |
| Package Type | Surface Mount (LGA) |
| Antenna | Antenna not included (external antenna required) |
| Type de montage | Surface Mount |
| Network Capacity | Up to 8191 associated devices (platform capability) |
Interfaces et connecteurs du FGH200MAAM2
Le FGH200MAAM2 expose les interfaces et connecteurs suivants tels que publiés par le fabricant : Sans fil. Le brochage de l'embase d'extension, la numérotation des broches des connecteurs et les limites électriques sont définis dans la documentation du fabricant.
| Sans fil | IEEE 802.11ah (Wi-Fi HaLow) |
Consultez la documentation du fabricant pour le brochage complet du connecteur d'extension et la numérotation des broches du connecteur.
Applications typiques
FGH200MAAM2 convient pour 6 applications: Smart Utility Metering, Industrial IoT Sensor Networks, Security Cameras and Surveillance, Smart City Infrastructure, Agricultural and Environmental Monitoring, Building Automation and Smart Home.
Smart Utility Metering
The FGH200MAAM2 fits smart electricity, water, and gas metering because IEEE 802.11ah in the 850-950 MHz band delivers kilometer-scale links with strong wall penetration, letting one collector reach meters in basements and metal cabinets that defeat 2.4 GHz Wi-Fi. The MM8108-based platform supports up to 8191 associated devices, so a single head-end can poll an entire residential feeder without cellular subscription costs. Modules operate at low duty cycle with low power consumption for battery-assisted meter designs. WPA3 and AES encryption with SHA-256/384/512 hashing protects billing data in transit. Place the module between the metering MCU and an external 850-950 MHz antenna, keeping the RF trace a controlled 50 ohms; budget link margin for sub-GHz Fresnel losses in dense urban deployments.
Recommandé
Industrial IoT Sensor Networks
In factories, refineries, and logistics yards, the FGH200MAAM2 provides long-range, standards-based backhaul for sensor clusters spread across large sites. Sub-1 GHz 802.11ah signals penetrate steel racking and concrete walls far better than 2.4 GHz radios, and the module's large-capacity MAC supports thousands of nodes per access point, scaling from dozens to thousands of vibration, temperature, and level sensors. Because it is native IP over Wi-Fi, sensor data integrates with existing IT networks without proprietary gateways or LoRaWAN network servers. Its low power consumption suits battery-powered retrofit sensors. Use the module with a site-wide HaLow access point in the 850-950 MHz band; verify regional spectrum legality (e.g., 866/915 MHz sub-bands) per deployment country, since the 850-950 MHz hardware covers multiple regional plans.
Recommandé
Security Cameras and Surveillance
Long-range wireless security cameras benefit directly from the FGH200MAAM2's combination of sub-1 GHz range and native IP throughput. Perimeter cameras mounted on poles or outbuildings often sit beyond 2.4 GHz Wi-Fi range, yet running Ethernet trenching is expensive; an 802.11ah link at 850-950 MHz carries video metadata and low-frame-rate streams over hundreds of meters with wall penetration for indoor placement of the access point. WPA3 with AES encryption prevents video interception, meeting typical surveillance compliance expectations. The module's low power consumption supports solar-plus-battery camera installs. Design with an external high-gain directional antenna for point-to-multipoint camera links, and confirm sustained throughput against camera bitrate, since 802.11ah channel widths are narrower than conventional Wi-Fi.
Recommandé
Smart City Infrastructure
Smart-city assets - streetlights, parking sensors, waste bins, environmental monitors - are dispersed over wide areas with mixed indoor/outdoor placement, matching the FGH200MAAM2's strengths: long-range transmission, good penetration, and large network capacity (up to 8191 devices per access point on the MM8108 platform). Standards-based 802.11ah avoids vendor lock-in of proprietary sub-GHz stacks, and the license-exempt band removes spectrum-licensing cost compared with cellular NB-IoT subscriptions. The compact 11.0 x 10.0 x 2.0 mm footprint fits space-constrained luminaire and pole-mounted enclosures. Use the module behind a HaLow access point at each neighborhood gateway, and design antennas for omnidirectional street-level coverage; validate regional band configuration (865-868 MHz EU, 902-928 MHz US, 916-928 MHz JP) in firmware.
Recommandé
Agricultural and Environmental Monitoring
Farms and environmental stations need connectivity across kilometers of open terrain with battery-only power, which the FGH200MAAM2 addresses through low-power 802.11ah operation in the 850-950 MHz band. Soil-moisture probes, weather stations, irrigation valves, and livestock trackers can associate to one farmhouse-mounted HaLow access point, avoiding cellular data plans across large acreage. Sub-1 GHz propagation tolerates crop canopy and light foliage better than higher bands. The module's standard IP stack lets sensor nodes run MQTT/HTTP directly to cloud platforms without protocol translation gateways. For solar-powered nodes, duty-cycle the radio and use the module's low-power sleep states; per Quectel's preliminary specification, confirm exact sleep-current figures from the latest datasheet revision before finalizing battery sizing.
Recommandé
Building Automation and Smart Home
Large residential and commercial buildings suffer from 2.4 GHz dead zones behind concrete and metal-stud walls; the FGH200MAAM2's sub-1 GHz penetration reaches thermostats, door locks, leak sensors, and HVAC controllers on a single HaLow access point. Capacity for up to 8191 associated devices accommodates whole-building sensor counts without additional infrastructure. Native IP plus WPA3/OWE encryption integrates cleanly with building-management systems and modern zero-trust security policies, while the open 802.11ah standard prevents dependence on closed ecosystems. The 11.0 x 10.0 x 2.0 mm castellated surface-mount footprint suits compact wall-plate and thermostat PCBs. Keep the module's antenna clear of metal back-boxes, or specify an external antenna variant, since embedment in metal degrades the 850-950 MHz link budget substantially.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour FGH200MAAM2 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | FGH200MAAMD | FGH200MAAM2 (eval variant) |
|---|---|---|---|
| Package | LGA 11.0 x 10.0 x 2.0 mm, surface mount | LGA 11.0 x 10.0 x 2.0 mm, surface mount - same | LGA 11.0 x 10.0 x 2.0 mm - same module |
| Brand | Quectel | Quectel | Quectel |
| Wireless Standard | IEEE 802.11ah (Wi-Fi HaLow) | IEEE 802.11ah | IEEE 802.11ah |
| Frequency Band | 850-950 MHz | 850-950 MHz | 850-950 MHz |
| Core SoC | Morse Micro MM8108 | Morse Micro MM8108 | Morse Micro MM8108 |
| Encryption | AES, WPA3, OWE | AES, WPA3, OWE | AES, WPA3, OWE |
| Hash Support | SHA-256, SHA-384, SHA-512 | SHA-256, SHA-384, SHA-512 | SHA-256, SHA-384, SHA-512 |
| Max Associated Devices (platform) | Up to 8191 | Up to 8191 | Up to 8191 |
Principaux différenciateurs
- Latest-generation MM8108 SoC platform (vs FGH100M)
- Modern security suite (vs FGH200MAAMD)
- Standards-based native IP connectivity (vs LoRaWAN modules (functional, non-drop-in))
Notes de conception
The FGH200MAAM2 ships without an antenna, so the host PCB must implement a 50-ohm controlled-impedance RF feed from the module antenna pad to the connector, kept as short as practical (target under 15 mm). Follow the layout guidelines in the Quectel FGH200M hardware design guide: keep the RF trace away from switching regulators, clock lines, and high-current paths, provide a continuous ground plane beneath it, and add a pi-matching network footprint (series 0-ohm plus two shunt pads) even if the antenna matches nominally, since final tuning at 850-950 MHz usually requires adjustment on first articles.
Wi-Fi HaLow radios draw burst currents during transmit well above their average consumption. Decouple the module supply with at least a 10 uF bulk capacitor plus 100 nF ceramic immediately at the supply pin, and size the host regulator for peak rather than average current. Confirm exact supply voltage range and peak transmit current from the latest Quectel FGH200M specification revision, since the public document is preliminary (V1.0.0, 2025-08-29) and electrical figures may change; under-rating the supply rail is the most common cause of brown-out resets during TX bursts on newly released modules.
The FGH200M specification is a preliminary release (V1.0.0, dated 2025-08-29), and the MAAM2 suffix encodes a specific regional/hardware configuration. Before committing to production, verify: (1) that the MAAM2 variant covers your target market's sub-band (e.g., 902-928 MHz US, 865-868 MHz EU, 916-928 MHz JP) within the 850-950 MHz hardware range; (2) regulatory certification status for your region; and (3) any pinout changes between preliminary and final datasheets. Ordering the FGH200M evaluation kit first avoids costly respins on variant-specific assumptions.
Informations de conformité
Compliance data was not present in the verified web data as of 2026-10-20; regulatory certifications for the MAAM2 regional variant should be confirmed via the Quectel product page and FGH200M specification.
