HMC270AMS8GETR - SPDT RF Switch DC-8GHz | Analog Devices
Référence : HMC270AMS8GETR ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $8.5 | $8,50 |
| 10 | $7.65 | $76,50 |
| 100 | $6.8 | $680,00 |
| 500 | $6.12 | $3 060,00 |
| 1 000 | $5.5 | $5 500,00 |
HMC270AMS8GETR Présentation
An RF switch is a critical component in wireless and test systems, allowing a single signal path to be routed to multiple destinations or selecting between multiple sources. In the hierarchy of RF front-end components, an RF switch sits between the antenna and the transceiver, enabling TDD (Time-Division Duplex) operation, antenna diversity, or band selection. The HMC270AMS8GETR is a non-reflective (absorptive) switch, meaning that the unused port is terminated internally, which minimizes reflections and improves system VSWR.
Key features of the HMC270AMS8GETR include its broad frequency coverage from DC to 8 GHz, high isolation of 70 to 35 dB, and low insertion loss. The switch is controlled by a single negative voltage line, simplifying the control interface. The MSOP-EP package is compact and suitable for space-constrained designs, while the exposed pad provides improved thermal performance. The device is rated for operation over the -40°C to +85°C temperature range, making it suitable for industrial and commercial applications.
Technically, the HMC270AMS8GETR is fabricated using GaAs (Gallium Arsenide) technology, which offers superior high-frequency performance compared to silicon-based switches. The non-reflective design incorporates internal 50-ohm terminations on the unused RF port, ensuring that the switch presents a consistent impedance to the system regardless of the switch state. This is particularly important in applications where VSWR must be minimized, such as in precision test equipment and radar systems.
Typical applications for the HMC270AMS8GETR include test and measurement instrumentation, microwave radio systems, military and aerospace communications, and satellite communications. Its wide bandwidth and high isolation make it ideal for routing signals in multi-band systems, while the negative control voltage allows direct interface with many baseband controllers.
When designing with this switch, ensure that the control voltage is properly decoupled and that the RF traces are impedance-matched to 50 ohms. The exposed pad should be soldered to a ground plane for optimal thermal and electrical performance. Also, consider the power handling capability, which is typically 27 dBm, to avoid damage in high-power applications.
Alternatives de remplacement direct pour HMC270AMS8GETR — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec HMC270AMS8GETR (même facteur de forme et même empreinte) — différant par Configuration, Control Voltage, Isolation, Technology.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
HMC270AMS8GE
✅ Remplacement direct✓ En stock
$7.9 / unité
Voir la fiche technique →HMC284AMS8GE
⚡ Même boîtier📋 Alternative de référence (hors catalogue)
PE4259
⚡ Même boîtier ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
SKY13350-385LF
⚡ Même boîtier ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
HMC270AMS8GETR Valeurs maximales et caractéristiques électriques
| Switch Type | SPDT |
| Frequency Range | DC to 8 GHz |
| Isolation | 70 dB to 35 dB |
| Impedance | 50 Ohm |
| Control Voltage | -5 V |
| Plage de température de fonctionnement | -40°C to +85°C |
| Boîtier | 8-MSOP-EP |
| Type de montage | Surface Mount |
| Technology | GaAs |
| Configuration | Non-reflective |
| Test Frequency | 8 GHz |
| Nombre de broches | 8 |
| Statut RoHS | Compliant |
| Tension d'alimentation | -5 V |
Configuration des broches de HMC270AMS8GETR
| Broche 1 | RFC — Common RF port |
| Broche 2 | GND — Ground |
| Broche 3 | RF1 — RF port 1 |
| Broche 4 | GND — Ground |
| Broche 5 | VCTL — Control voltage (-5V) |
| Broche 6 | GND — Ground |
| Broche 7 | RF2 — RF port 2 |
| Broche 8 | GND — Ground |
| Broche 9 | PAD — Exposed pad, connect to ground |
Applications typiques
HMC270AMS8GETR convient pour 6 applications: Test and Measurement, Microwave Radio Systems, Military and Aerospace Communications, Satellite Communications, Radar Systems, Broadband Communication Systems.
Test and Measurement
The HMC270AMS8GETR is ideal for test and measurement equipment such as signal generators, spectrum analyzers, and network analyzers. Its DC to 8 GHz bandwidth and high isolation (70-35 dB) ensure accurate signal routing without leakage. The non-reflective design maintains a 50-ohm match, critical for minimizing VSWR in precision measurements. The -5 V control voltage integrates easily with existing test equipment control logic. This switch enables reliable switching between multiple signal paths, improving test throughput and accuracy.
Recommandé
Microwave Radio Systems
In microwave radio systems, the HMC270AMS8GETR provides reliable TDD switching between transmit and receive paths. Its broad frequency coverage up to 8 GHz supports various microwave bands, while the high isolation prevents transmitter leakage into the receiver. The non-reflective design ensures that the antenna port remains matched, reducing reflections that could degrade system performance. The compact MSOP-EP package is suitable for space-constrained radio modules. The -5 V control voltage is compatible with common baseband controllers, simplifying integration.
Recommandé
Military and Aerospace Communications
The HMC270AMS8GETR is well-suited for military and aerospace communication systems that require high reliability and wide bandwidth. Its DC to 8 GHz range covers many defense communication bands, and the high isolation ensures secure signal routing. The device operates over -40°C to +85°C, meeting the environmental requirements of many defense applications. The GaAs technology provides excellent performance in harsh RF environments. The non-reflective design is beneficial in systems where VSWR must be tightly controlled, such as in phased array antennas.
Recommandé
Satellite Communications
For satellite communication systems, the HMC270AMS8GETR offers the wide bandwidth and high isolation needed for routing signals between different frequency bands. Its DC to 8 GHz coverage includes C-band and X-band frequencies commonly used in satellite links. The non-reflective design minimizes signal reflections, which is crucial for maintaining link quality. The compact package and low power consumption make it suitable for satellite payloads where space and power are limited. The -5 V control voltage is compatible with satellite control interfaces.
Recommandé
Radar Systems
In radar systems, the HMC270AMS8GETR is used for T/R switching and signal routing. Its high isolation (up to 70 dB) prevents transmitter leakage into the receiver, protecting sensitive components. The broad frequency range supports various radar bands, including S-band and C-band. The non-reflective design ensures that the antenna port is always matched, reducing unwanted reflections that could cause false echoes. The device's fast switching speed and reliable performance make it suitable for pulsed radar applications. The -5 V control voltage is easily generated from standard power supplies.
Recommandé
Broadband Communication Systems
The HMC270AMS8GETR is ideal for broadband communication systems such as cable TV, fiber-to-the-home, and 5G infrastructure. Its DC to 8 GHz bandwidth covers a wide range of communication frequencies, and the high isolation ensures clean signal routing. The non-reflective design is beneficial in systems with multiple signal paths, as it maintains consistent impedance. The compact MSOP-EP package is suitable for high-density PCBs. The -5 V control voltage is compatible with many communication system controllers, making integration straightforward.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour HMC270AMS8GETR — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | HMC270AMS8GE | HMC284AMS8GE | HMC270MS8GETR |
|---|---|---|---|---|
| Package | 8-MSOP-EP | 8-MSOP-EP | 8-MSOP-EP | TSSOP-8 |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Frequency Range | DC to 8 GHz | DC to 8 GHz | DC to 3.5 GHz | DC to 8 GHz |
| Control Voltage | -5 V | -5 V | Positive | -5 V |
| Configuration | Non-reflective | Non-reflective | Non-reflective | Non-reflective |
| Operating Temperature | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C |
| Technology | GaAs | GaAs | GaAs | GaAs |
Principaux différenciateurs
- Broadband DC to 8 GHz coverage (vs HMC284AMS8GE)
- High isolation up to 70 dB (vs HMC284AMS8GE)
- Non-reflective design (vs HMC270MS8GETR)
Notes de conception
Ensure RF traces are impedance-matched to 50 ohms. Use controlled impedance traces and place the switch close to the antenna or transceiver to minimize trace length. The exposed pad should be soldered to a ground plane with multiple vias for thermal and electrical grounding.
The control voltage is -5 V. Ensure a clean, well-decoupled -5 V supply. Place a 100 nF capacitor close to the VCTL pin to filter noise. The switch does not require a positive supply, simplifying the power design.
Do not exceed the maximum RF input power, which is typically 27 dBm. Exceeding this can damage the switch. Also, ensure the control voltage is within the specified range to avoid latch-up or damage. For positive control applications, use the HMC284AMS8GE instead.
Informations de conformité
RoHS compliant per distributor listings. No AEC-Q100 qualification for this RF switch.
