Maxim Integrated

ICL7135CPI-2 - 4.5-Digit BCD A/D Converter | Maxim

Référence : ICL7135CPI-2 ✓ Actif
2.0000 V Vdss 28-pin PDIP Package
MOQ : 1 |

ICL7135CPI-2 Présentation

Maxim Integrated ICL7135CPI-2 is a high-precision 4.5-digit monolithic analog-to-digital converter with multiplexed BCD outputs, differential inputs, and a 2.0000 V full-scale range in a 28-pin PDIP package. It uses a dual-slope conversion architecture with automatic zeroing, automatic polarity, and ratiometric operation, making it suitable for precision measurement systems and digital display instruments.

A BCD A/D converter converts an analog input voltage into a binary-coded decimal value intended for direct display decoding. The ICL7135 belongs to the dual-slope ADC family, a converter category valued for predictable accuracy, excellent rejection of periodic noise, and suitability for low-rate panel measurements. Its architecture supports high-impedance differential input measurement while providing separate multiplexed digit outputs for four-digit plus sign displays.

Key features include 4.5-digit resolution, ±1 count in 20,000 accuracy, and a 2.0000 V full-scale capability. Differential inputs allow the converter to measure the voltage between two sources rather than only one input referenced to ground. Nearly ideal differential linearity, true ratiometric operation, auto-zero, and auto-polarity reduce calibration requirements and simplify front-end design.

The converter combines an analog measurement section with a digital timing and output section. During dual-slope conversion, the converter integrates the unknown input for a fixed interval and then compares the resulting reference charge against a controlled counter. Differential linearity and noise rejection arise from this controlled integration process. Multiplexed BCD outputs reduce the number of package pins required to communicate the measurement to display drivers.

Typical applications include laboratory and bench-top meters, digital panel meters, weighing scales, process-monitoring equipment, temperature-measurement instruments, and laboratory power supplies. The high-impedance differential input is particularly useful when the source has limited drive capability or when measurement errors from common-mode voltage must be reduced.

When implementing the circuit, place input and reference-network components close to the converter and maintain clean, low-leakage analog routing around the high-impedance inputs. Select stable reference and integration capacitors with suitable dielectric characteristics, and verify the displayed zero and span behavior over the expected temperature range. The 28-pin PDIP footprint favors through-hole instrumentation designs rather than compact surface-mounted products.

This product page combines the official ICL7135 family information with a package-aware comparison, practical design guidance, and same-footprint replacement considerations for engineers maintaining legacy precision-meter platforms.

Alternatives de remplacement direct pour ICL7135CPI-2 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec ICL7135CPI-2 (même facteur de forme et même empreinte) — différant par Output Format, Package, Conversion Accuracy, Conversion Rate, Converter Type.

Texas Instruments
Output Format: Multiplexed BCD output
Package: 28-pin DIP
Conversion Rate: 0.003 kSPS
Comparer avec ICL7135CPI-2 →
Maxim Integrated
Output Format: Multiplexed binary-coded decimal (BCD)
Package: 28-pin plastic DIP
Conversion Accuracy: ±1 count in 20,000
Comparer avec ICL7135CPI-2 →
Renesas Electronics
Output Format: Multiplexed BCD
Conversion Rate: Approximately 2 samples per second
Converter Type: Dual-slope integrating ADC
Comparer avec ICL7135CPI-2 →

ICL7135CPI+

✅ Remplacement direct
Maxim Integrated
📦 28-PDIP
4.5-digit dual-slope analog-to-digital converter · Multiplexed binary-coded decimal (BCD) · ±1 count in 20,000 · 2.0000 V · Differential, high impedance · 28-pin plastic DIP · 28 pins · 4 multiplexed digit-drive positions

Contactez-nous pour le prix

Voir la fiche technique →

ICL7135CPI+2

✅ Remplacement direct
📦 28-PDIP
Same 4.5-digit multiplexed-BCD converter in 28-PDIP; legacy ordering-code sourcing differs by 1 suffix position

📋 Alternative de référence (hors catalogue)

ICL7135CPIZ

✅ Remplacement direct
Renesas Electronics
📦 28-PDIP
Dual-slope integrating ADC · 4.5 digits · Multiplexed BCD · ±1 count in 20,000 · 2.0000 V · 100 uV per count · High-impedance differential input · Approximately 2 samples per second

Contactez-nous pour le prix

Voir la fiche technique →

ICL7135CN

✅ Remplacement direct
Texas Instruments
📦 28-PDIP
4.5-digit precision analog-to-digital converter · Dual-slope · 4.5 digits · 0.003 kSPS · True differential input · High-impedance differential input · 2.0000 V · ±1 count in 20,000

Contactez-nous pour le prix

Voir la fiche technique →

TC835CPI

✅ Remplacement direct
📦 28-PDIP
Cross-brand 4.5-digit BCD converter in the same 28-PDIP comparison class; timing, reference, and pin-function differences remain subject to review

📋 Alternative de référence (hors catalogue)

ICL7135CPI-2 Valeurs maximales et caractéristiques électriques

Résolution 4.5 digits
ADC Architecture Dual-slope conversion
Full-Scale Voltage 2.0000 V
Conversion Accuracy ±1 count in 20,000 counts
Output Format Multiplexed 4-digit BCD
Input Configuration High-impedance differential input
Differential Linearity Nearly ideal
Reference Type Ratiometric
Zero Adjustment Automatic zero
Polarity Detection Automatic polarity
Boîtier 28-pin PDIP
Type de montage Through-hole

Guide de configuration des broches du ICL7135CPI-2 28-pin pdip

Configuration des broches du ICL7135CPI-2 (boîtier 28-pin pdip). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 28-pin pdip pour le ICL7135CPI-2

Aucune donnée de brochage détaillée disponible pour ICL7135CPI-2.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

ICL7135CPI-2 convient pour 6 applications: Digital Panel Meters, Laboratory Digital Meters, Weighing Scale Instrumentation, Temperature Measurement Systems, Process Monitoring Equipment, Precision Voltage Measurement.

📺

Digital Panel Meters

The ICL7135CPI-2 is well suited to digital panel meters because its 4.5-digit resolution and multiplexed BCD outputs directly support a four-digit plus-sign display. The dual-slope architecture provides ±1 count in 20,000 accuracy according to the official Analog Devices product page, while automatic zeroing simplifies offset correction. In an instrument, the converter sits between the sensor front end and display drivers, with its high-impedance differential input reducing source-loading errors and its BCD outputs reducing the interface pin count.

🔧

Laboratory Digital Meters

The ICL7135CPI-2 can serve as the measurement engine in a laboratory digital meter requiring stable readings from resistive sensors, dividers, or low-current transducers. Its 4.5-digit resolution and 2.0000 V full-scale range provide a precise conversion core, while true ratiometric operation can cancel reference variation when the input and reference share a proportional supply path. The 28-pin PDIP footprint favors through-hole instrument construction and maintenance of older meter platforms.

⚖️

Weighing Scale Instrumentation

A weighing scale benefits from the ICL7135CPI-2's differential input architecture and 4.5-digit measurement resolution. The load-cell signal can be amplified and referenced before entering the converter, while automatic zero helps suppress offset drift. The device's dual-slope measurement cycle is appropriate for relatively slow weight readings, and its multiplexed BCD output can feed a display driver without requiring a parallel binary bus. Component leakage and reference stability remain important because the input network operates at high impedance.

🌡️

Temperature Measurement Systems

The ICL7135CPI-2 can be used in temperature-measurement instruments when a linearized sensor signal is presented to a differential analog front end. Its 4.5-digit resolution provides enough displayed precision for many RTD, thermocouple-amplifier, or thermistor-network systems, while automatic polarity supports positive and negative readings around a midpoint. The converter's low-rate dual-slope operation fits slowly changing process temperatures and helps reject periodic noise without requiring a high-speed successive-approximation ADC.

🏭

Process Monitoring Equipment

The ICL7135CPI-2 is appropriate for process-monitoring equipment that displays a measured pressure, flow, level, or voltage rather than processing samples at high speed. Differential inputs allow the instrument to reject common-mode voltage present on industrial sensor wiring, and the 4.5-digit BCD result can be read by a dedicated display driver. Its 28-pin PDIP package supports through-hole industrial instrument construction, although grounding, reference isolation, and protection from surge events must be handled by the surrounding circuit.

⚡

Precision Voltage Measurement

The ICL7135CPI-2 supports precision voltage measurement when its 2.0000 V full-scale range is matched to the conditioned input. A ratiometric arrangement can improve stability by deriving the reference and measurement path from a related source, while automatic zeroing reduces input offset. Because the converter is a 4.5-digit integrating ADC, it favors stable DC measurements rather than waveforms or rapidly changing signals. Layout must keep high-impedance input nodes short and guard against board leakage and contaminated insulation.

Récapitulatif des produits recommandés

ICL7135CPI Same-family 28-PDIP BCD converter Utilisé dans : Digital Panel Meters, Temperature Measurement Systems, Precision Voltage Measurement ICL7107CPL+3 Display-driver companion for BCD instrument interfaces Utilisé dans : Digital Panel Meters, Laboratory Digital Meters, Weighing Scale Instrumentation, Precision Voltage Measurement ICL7135CPI+2 Same-family 4.5-digit BCD converter Utilisé dans : Laboratory Digital Meters, Process Monitoring Equipment ICL7135CPIZ Renesas Electronics Utilisé dans : Weighing Scale Instrumentation, Temperature Measurement Systems ICL7116CQH+D Analog Devices Utilisé dans : Process Monitoring Equipment
What is the ICL7135CPI-2 datasheet for?
The ICL7135CPI-2 datasheet documents the electrical characteristics, pin assignments, conversion behavior, timing, and application circuit for Maxim Integrated's 4.5-digit BCD A/D converter. The official Analog Devices ICL7135 product page is the appropriate starting point, while the Intersil datasheet archive provides a 15-page copy for the original ICL7135CPI family. Use the package pin-description table before assigning PCB connections or designing a replacement board.
What are the key specifications of ICL7135CPI-2 that engineers should know?
The ICL7135CPI-2 is a 4.5-digit, dual-slope monolithic A/D converter with multiplexed BCD outputs, high-impedance differential inputs, and a 2.0000 V full-scale range. According to the official Analog Devices ICL7135 product page, it provides ±1 count in 20,000 accuracy, nearly ideal differential linearity, true ratiometric operation, automatic zero, and automatic polarity. It is packaged as a 28-pin PDIP for through-hole precision-instrument designs.
Where can I download the ICL7135CPI-2 datasheet PDF?
The ICL7135CPI-2 datasheet PDF can be obtained through the official Analog Devices ICL7135 product page at https://www.analog.com/en/products/icl7135.html. An archived Intersil document for the ICL7135CPI is also listed at https://www.alldatasheet.com/datasheet-pdf/pdf/67431/INTERSIL/ICL7135CPI.html. Confirm the ordering-code and temperature-grade suffix against your PCB requirements before releasing the design.
Where can I find the ICL7135CPI-2 pinout?
The ICL7135CPI-2 pinout is shown in the manufacturer datasheet's pin-configuration and pin-description sections for the 28-pin PDIP package. The product listings identify the device as a 28-PDIP display-driver A/D converter with multiplexed BCD outputs. Use the manufacturer's numbered package diagram when routing the differential inputs, reference inputs, control signals, and multiplexed digit outputs to avoid confusing the ICL7135CPI-2 suffix with another package variant.
What is the difference between ICL7135CPI-2 and ICL7135CPI?
The ICL7135CPI-2 and ICL7135CPI are both associated with the 4.5-digit, 28-pin PDIP ICL7135 family, but their ordering codes can represent different manufacturer sourcing or grade arrangements. The ICL7135CPI listing identifies a Renesas Electronics 28-PDIP device, while the ICL7135CPI-2 result appears under Rochester Electronics. Because suffix meaning can differ by manufacturer and source, engineers should compare the complete datasheet, grade code, temperature range, and marking before treating one as a drop-in replacement.
Is ICL7135CPI-2 suitable for a digital panel meter?
The ICL7135CPI-2 is suitable for a digital panel meter because it combines 4.5-digit resolution, multiplexed BCD outputs, differential inputs, and automatic zeroing in a 28-pin PDIP package. According to the official Analog Devices product page, the dual-slope architecture provides ±1 count in 20,000 accuracy and strong inherent rejection of periodic noise. Its through-hole package is especially suitable for legacy meter, bench-instrument, and process-panel designs.
What can replace ICL7135CPI-2?
The closest documented replacement candidates for ICL7135CPI-2 are ICL7135CPI, ICL7135CPI+2, ICL7135CPIZ, ICL7135CN, and TC835CPI, but each requires a complete suffix and pinout review. The ICL7135CPI and ICL7135CPIZ listings identify 28-PDIP devices, while comparison results connect ICL7135CN and TC835CPI to the same family. Request a quote for the exact replacement and validate electrical grade, timing, display interface, and footprint before substitution.
Is ICL7135CPI+2 the same as ICL7135CPI-2?
ICL7135CPI+2 and ICL7135CPI-2 are not automatically interchangeable solely because their ordering codes look similar. Distributor records list ICL7135CPI+2 as a 28-PDIP, 4.5-digit BCD A/D converter, and the Rochester result uses ICL7135CPI-2, but the suffix format may represent different legacy sourcing conventions. Verify the complete ordering code, manufacturer, temperature grade, ceramic or plastic package, and absolute maximum ratings in the applicable datasheet before approving a substitution.
When should I choose ICL7135CPI-2 over ICL7135CPI?
Choose ICL7135CPI-2 when its documented sourcing, qualification, and ordering-code status match the instrument being maintained. Choose ICL7135CPI when its manufacturer, temperature grade, and 28-PDIP pinout are confirmed as equivalent for that design. Both parts belong to the 4.5-digit ICL7135 measurement family, but a matching package alone does not establish drop-in compatibility; timing, supply requirements, reference implementation, and display outputs must also be compared.
Is ICL7135CPI-2 still available for legacy instruments?
The ICL7135CPI-2 remains obtainable through specialist legacy-instrument sourcing, and the manufacturer continues to list the ICL7135 family on its official product page. The Rochester Electronics result specifically identifies ICL7135CPI-2, while current distributor records list related ICL7135CPI variants. Request a quote for availability, lead time, minimum order quantity, and the exact packaging configuration through the Request a Quote form on this page.
Where can I buy ICL7135CPI-2 online?
Use the Request a Quote form on this page to request ICL7135CPI-2 availability, unit pricing, lead time, and minimum order quantity. The part is associated with Rochester Electronics and the original Intersil ICL7135CPI family, while Analog Devices currently lists the ICL7135 family on its official product page. A purchase request should state the exact ICL7135CPI-2 marking, 28-pin PDIP package, target quantity, and required delivery date.
What is the price of ICL7135CPI-2?
The current commercial price for ICL7135CPI-2 should be obtained through the Request a Quote form on this page because legacy-part pricing depends on quantity, sourcing condition, and package availability. The Rochester Electronics listing confirms that an ICL7135CPI-2 datasheet and sourcing record exists, but it does not establish a current quantity-break schedule. Submit the required quantity and purchase schedule for a traceable quotation.
What is the lead time for ICL7135CPI-2?
The current lead time for ICL7135CPI-2 should be confirmed through the Request a Quote form on this page. Lead time for this legacy through-hole converter depends on remaining factory stock, supplier inventory, inspection requirements, and the quantity ordered. Include the target annual usage, required delivery date, and acceptable packaging condition when requesting the quotation so the supplier can identify the correct ICL7135CPI-2 source and production plan.
What is the best Renesas equivalent for ICL7135CPI-2?
The best documented Renesas-family candidate is ICL7135CPI, which is listed as a 4.5-digit, 28-PDIP display-driver A/D converter. ICL7135CPIZ is another 28-PDIP ordering option found in the same Renesas listing family. Neither should be called an automatic substitute without checking the complete datasheet, temperature grade, supply limits, conversion timing, and BCD output pinout; use the Request a Quote form to confirm sourcing for the exact replacement.
Does ICL7135CPI-2 need auto-zero and auto-polarity circuitry?
The ICL7135CPI-2 incorporates automatic zero and automatic polarity functions as core features of the ICL7135 converter. According to the official Analog Devices ICL7135 product page, these functions support its ±1 count in 20,000 accuracy and nearly ideal differential linearity. The surrounding analog reference and input network still requires careful layout, stable components, clean grounding, and leak-free high-impedance routing to preserve measurement performance.

Données de référence d'ingénierie pour ICL7135CPI-2 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose ICL7135CPI-2 for repairing or reproducing equipment whose original bill of materials identifies that exact legacy ordering code, particularly when the design uses the 28-PDIP footprint and multiplexed BCD display output. ICL7135CPI+2 is the closest documented Maxim-family option, while ICL7135CPI and ICL7135CPIZ provide Renesas-family sourcing options with the same 28-PDIP class. ICL7135CN may suit applications requiring a specific ceramic package grade, and TC835CPI is a cross-brand candidate worth reviewing when the required pin and timing functions match. In every case, verify the complete datasheet, temperature range, supply voltage, conversion sequence, reference configuration, and display-driver interface before replacement.

Comparaison avec les alternatives

Paramètre Ce produit ICL7135CPI ICL7135CPI+2 ICL7135CPIZ ICL7135CN TC835CPI
Package 28-PDIP 28-PDIP 28-PDIP 28-PDIP 28-PDIP 28-PDIP
Brand Maxim Integrated Renesas Electronics Analog Devices Inc./Maxim Integrated Renesas Electronics Analog Devices Teledyne Technologies
Resolution 4.5 digits 4.5 digits 4.5 digits 4.5 digits 4.5 digits 4.5 digits
Mounting Type Through-hole Through-hole Through-hole Through-hole Through-hole Through-hole

Principaux différenciateurs

  • Legacy-sourcing match for ICL7135CPI-2 assemblies (vs ICL7135CPI)
  • Direct manufacturer-family ordering option (vs ICL7135CPI+2)
  • Renesas 28-PDIP service alternative (vs ICL7135CPIZ)

Notes de conception

Route the high-impedance differential inputs as short as possible and keep them away from the clock, multiplexed BCD outputs, switching-regulator wiring, and exposed connector fields. Place input and reference-network components close to the corresponding converter pins. Because leakage at the input node can create a measurement error, use clean PCB surfaces, suitable guarding, and conformal protection when the sensor cable is long or humidity is significant.

Do not substitute a 28-PDIP ICL7135 ordering code solely by package shape. Confirm the pin functions, supply requirements, conversion timing, reference polarity, display multiplexing sequence, temperature grade, and ceramic or plastic construction against the applicable manufacturer datasheet. The ICL7135CPI-2 designation is also represented under legacy sourcing organizations, so the exact ordering-code history and device marking should be checked before releasing a replacement to production.

Decouple each supply rail near the converter with the capacitance and ESR requirements stated in the manufacturer datasheet. Reference components and integration capacitors should be selected for stability over the complete operating temperature range, including temperature coefficient and dielectric-voltage considerations. If the measurement reference is shared with a sensor or display supply, verify that ratiometric tracking remains sufficiently close to preserve accuracy.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The ICL7135 family is an older precision analog measurement product; no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact ordering code. AEC-Q100 is not applicable to this general-purpose industrial A/D converter.

Données vérifiées le : 2026-11-20 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

icl7135cpi datasheet ICL7135CPI-2 datasheet PDF ICL7135CPI-2 pinout ICL7135CPI-2 replacement ICL7135CPI-2 equivalent ICL7135CPI-2 cross reference ICL7135CPI-2 28-PDIP pinout ICL7135CPI-2 dual slope ADC ICL7135CPI vs ICL7135CPI-2 ICL7135CPI-2 price ICL7135CPI-2 stock Maxim ICL7135CPI-2 ICL7135CPI-2 digital panel meter

Composants & termes associés

Maxim Integrated Analog Devices Renesas Electronics ICL7135CPI-2 ICL7135CPI ICL7135CPI+2 ICL7135CPIZ ICL7135CN TC835CPI 4.5-digit A/D converter dual-slope ADC monolithic A/D converter multiplexed BCD output high-impedance differential input ratiometric operation automatic zero automatic polarity 2.0000 V full scale precision measurement digital panel meter 28-pin PDIP through-hole package QFN family
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ