Texas Instruments

INA129SHKJ - 8-Pin Precision Instrumentation Amplifier | TI

Référence : INA129SHKJ ✓ Actif
700 µA Vdss 2 mA typical Id 8-CFP ceramic flat package Package
MOQ : 1 |

INA129SHKJ Présentation

The Texas Instruments INA129SHKJ is a single-circuit, precision instrumentation amplifier in an 8-pin ceramic flat package (8-CFP). It supports an external-resistor gain range from 1 to 10,000, operates from wide dual supplies up to ±18 V, and provides input protection to ±40 V. Its nominal gain-bandwidth characteristic is 1.3 MHz, with a 4 V/µs slew rate. The device is designed for low-level differential measurements where common-mode rejection, low offset voltage, and controlled input bias current are important.

An instrumentation amplifier is a specialized differential amplifier designed to amplify the difference between two input signals while rejecting common-mode voltage, supply variation, and other disturbances that appear equally at both inputs. Its typical hierarchy is instrumentation amplifier → differential amplifier → analog signal-conditioning IC → semiconductor. Unlike a general-purpose operational amplifier, an instrumentation amplifier commonly integrates input buffers, a differential gain stage, and feedback resistors in a high-precision package.

The INA129SHKJ provides several characteristics suited to demanding measurement systems. Its gain is established with one external resistor, and its gain equation is compatible with the AD620, allowing familiar gain-selection calculations. The device is laser trimmed for low offset voltage, with a typical value of 25 µV, and its input bias current is listed as 50 nA typical. Typical common-mode rejection is 95 dB, while the manufacturer identifies 93 dB CMRR at gains of 100 or greater. Input protection extends to ±40 V for applications in which transient or fault voltages may appear at the measurement terminals.

Electrically, the INA129 combines internal gain-setting elements with a single external resistor, making gain selection straightforward across a wide range. The 1.3 MHz gain-bandwidth figure supports operation across sensor instrumentation, bridge measurement, and industrial monitoring applications, although the usable bandwidth depends on the selected gain. The 4 V/µs slew rate provides adequate large-signal response for many low- and medium-frequency sensing systems. Low quiescent current and low input bias current also help reduce loading of high-impedance transducers.

Typical uses include current shunt measurement, strain-gauge and resistance bridge excitation, precision sensor interfaces, industrial process monitoring, and high-voltage measurement systems where protected inputs are advantageous. The ceramic package and broad specified temperature range make the INA129SHKJ particularly relevant to harsh-environment instrumentation, including industrial, aerospace, and defense systems where long-term thermal stability and input robustness are essential.

Designers should account for input and output common-mode limits, external resistor tolerance and temperature coefficient, input filtering, supply bypass capacitance, and PCB thermal performance. A single resistor sets the gain, but its tolerance directly affects gain accuracy. The protected inputs should still be analyzed for continuous overvoltage, because protection is not a substitute for correctly rating external circuitry. Reference-ground connections and exposed pad or ceramic-package thermal paths should follow the manufacturer's pin and layout guidance.

This page combines package, electrical, pricing, sourcing, and lifecycle information with application guidance and engineering checks for the INA129SHKJ. It also highlights the distinction between exact package equivalence and merely similar instrumentation amplifiers, helping buyers evaluate replacement risk before committing to a board-level substitution.

Alternatives de remplacement direct pour INA129SHKJ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Aucune alternative de remplacement direct disponible pour ce produit.

Demander des alternatives

INA129SHKJ Valeurs maximales et caractéristiques électriques

Amplifier Type Precision instrumentation amplifier
Number of Circuits 1 circuit
Boîtier 8-CFP ceramic flat package
Packaging Tube
Gain Range 1 to 10,000
Gain Setting 1 external resistor
Gain-Bandwidth Product 1.3 MHz
Slew Rate 4 V/µs
Courant d'alimentation 700 µA
Courant de repos 2 mA typical
Input Bias Current 50 nA typical
Offset Voltage 25 µV typical
Common-Mode Rejection 95 dB typical
CMRR at Gain of 100 or Greater 93 dB minimum
Input Protection Range ±40 V
Wide Supply Range ±18 V
Plage de température de fonctionnement -55 °C to +210 °C
Type de montage Surface mount

Guide de configuration des broches du INA129SHKJ 8-cfp ceramic flat package

Configuration des broches du INA129SHKJ (boîtier 8-cfp ceramic flat package). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 8-cfp ceramic flat package pour le INA129SHKJ

Aucune donnée de brochage détaillée disponible pour INA129SHKJ.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

INA129SHKJ convient pour 6 applications: High-Side Current Sensing, Strain-Gauge Bridge Instrumentation, Precision Pressure Sensor Interface, Industrial Process Measurement, Aerospace Sensor Signal Conditioning, Low-Level Differential Data Acquisition.

⚡

High-Side Current Sensing

The INA129SHKJ is well suited to measuring the small differential voltage produced by a current shunt while rejecting the common-mode voltage present in the supply path. Its 95 dB typical common-mode rejection, 25 µV typical offset voltage, and 50 nA typical input bias current help preserve measurement accuracy when the shunt voltage is small. The device can be placed across a shunt in a ±18 V power system, with its protected inputs extending to ±40 V. A single external resistor sets the gain from 1 to 10,000, allowing the shunt millivolt signal to be scaled for an ADC. Engineering attention should remain on common-mode limits, shunt placement, Kelvin routing, and gain-bandwidth interaction rather than treating the instrumentation amplifier as a universal front end.

🏭

Strain-Gauge Bridge Instrumentation

The INA129SHKJ can amplify the millivolt-level differential output of a resistive strain-gauge or load-cell bridge while rejecting excitation-related common-mode voltage. Low offset voltage of 25 µV typical and input bias current of 50 nA typical are especially useful in bridge circuits where small signals sit near the lower end of the converter range. Its externally selected gain from 1 to 10,000 permits scaling for a 2.5 V, 3.3 V, or 5 V measurement chain. Designers should calculate the full bridge output, worst-case resistor tolerance, excitation drift, and self-heating effects. The 1.3 MHz bandwidth also means that high gain reduces usable signal bandwidth, so filtering and acquisition timing should be planned together.

🧩

Precision Pressure Sensor Interface

The INA129SHKJ provides a direct interface for differential pressure sensors whose outputs contain a small amplified signal riding on a larger common-mode voltage. Its high common-mode rejection reduces errors from sensor excitation and analog ground shifts, while the 50 nA typical input bias current limits loading of high-impedance sensor outputs. The ±18 V wide-supply capability supports industrial signal-conditioning systems, and protected inputs to ±40 V improve tolerance of installation transients. Gain is selected with one resistor using the AD620-compatible equation. For reliable pressure measurements, the engineer should also evaluate sensor sensitivity, excitation drift, analog input filtering, common-mode range, and the amplifier's noise contribution relative to the smallest pressure being resolved.

🏭

Industrial Process Measurement

The INA129SHKJ can condition low-level differential process signals when field wiring introduces substantial voltage variation between the two measurement terminals. Its 95 dB typical common-mode rejection helps suppress coupled industrial noise, while the 4 V/µs slew rate provides useful response for many process-control bandwidths. The 8-CFP ceramic package is suitable for demanding industrial and harsh-environment equipment where a plastic package may be insufficient. Designers should place the amplifier close to the sensor or connector, use guarding and differential routing for high-impedance sources, and provide local supply bypassing. The external gain resistor needs an appropriate tolerance and temperature coefficient, while the selected gain must leave enough bandwidth for the process-control loop.

✈️

Aerospace Sensor Signal Conditioning

The INA129SHKJ's -55 °C to +210 °C operating range and ceramic package make it applicable to aerospace and other high-temperature sensing systems. The instrumentation amplifier can measure differential sensor outputs while its common-mode rejection limits errors from system grounding and supply changes. The 25 µV typical offset is valuable when the sensor output is small, and the AD620-compatible gain equation supports familiar resistor selection. Qualification for an individual aerospace program still requires examination of the exact ordering code, package qualification, screened-part options, and system requirements. Circuit designers should verify input common-mode limits across temperature, avoid placing unnecessary stress on the protected inputs, and account for ceramic-package thermal expansion and solder-joint reliability during assembly.

📺

Low-Level Differential Data Acquisition

The INA129SHKJ is useful as the analog front end for low-level differential sensors feeding a high-resolution converter. Its 1.3 MHz gain-bandwidth figure, 4 V/µs slew rate, low offset voltage, and high common-mode rejection provide a combination of signal fidelity and operating flexibility. The instrumentation amplifier can amplify a bipolar sensor output toward the converter's input range while rejecting common-mode voltage from cables or shared supplies. For optimum results, the engineer must select a gain that preserves required bandwidth, account for gain-resistor error, and calculate noise and settling time at the ADC. A differential or carefully filtered converter interface, local ground planning, and short high-impedance traces are as important as the nominal gain-bandwidth value.

Where to buy INA129SHKJ online?
The INA129SHKJ can be requested through the Request a Quote form on this page. The form is the appropriate route for checking current availability, minimum order quantity, and delivery timing without relying on a stale catalog figure. The exact ordering code is INA129SHKJ, and the requested quantity should include the tube packaging requirement where applicable.
What is the price of INA129SHKJ?
Use the Request a Quote form on this page for the current price of INA129SHKJ. The structured listing data contains a historical unit-price reference, but transaction pricing can change with quantity, inventory, and sourcing conditions. Submit the required tube quantity and delivery destination through the quote form so the commercial response reflects the current request.
What is the lead time for INA129SHKJ?
The current lead time for INA129SHKJ should be confirmed through the Request a Quote form on this page. Lead time can vary with the ordered quantity, tube packaging, production status, and destination. The device is listed as an active INA129-HT family member, so the quote process can account for standard production supply rather than treating it as a legacy-only procurement.
Is INA129SHKJ in stock?
The INA129SHKJ is marketed for immediate order by authorized distribution channels, but exact stock changes rapidly. Use the Request a Quote form on this page to request the current availability for the quantity and tube packaging needed. This provides a direct, quantity-specific response instead of presenting an unverified stock count.
What are the key specifications of INA129SHKJ that engineers should know?
The INA129SHKJ is a one-circuit precision instrumentation amplifier with gains from 1 to 10,000, a 1.3 MHz gain-bandwidth figure, 4 V/µs slew rate, ±18 V wide-supply capability, and input protection to ±40 V. According to the manufacturer product information, it also has 25 µV typical offset voltage, 50 nA typical input bias current, and 95 dB typical common-mode rejection.
Where to download the INA129SHKJ datasheet PDF?
The official INA129SHKJ datasheet is available through Texas Instruments' INA129-HT product documentation. The product page provides the manufacturer-controlled documentation and ordering information for the exact suffix. Use the pin-description table, electrical-characteristics table, and package drawings from that datasheet when creating the PCB footprint and selecting external gain and bypass components.
Where to find the INA129SHKJ pinout?
The INA129SHKJ pinout is found in the pin-configuration section of the Texas Instruments INA129-HT datasheet. The device uses an 8-CFP ceramic flat package, and every signal, supply, and reference connection should be taken from the manufacturer's numbered package drawing. Do not infer the pin arrangement from a visually similar 8-pin SOIC or plastic-DIP package.
How does the INA129SHKJ set its gain?
The INA129SHKJ sets its gain with one external resistor and supports gains from 1 to 10,000. According to the manufacturer product information, the INA129 gain equation is compatible with the AD620 equation. The resistor tolerance and temperature coefficient contribute directly to gain error, so precision applications should use a suitable resistor network and account for the equation's sensitivity.
What is the operating voltage of INA129SHKJ?
The INA129SHKJ operates from wide dual supplies extending to ±18 V. The exact minimum and maximum working supply points should be checked in the electrical-characteristics table for the selected gain and common-mode conditions. Its protected inputs extend to ±40 V, but that input rating should not be interpreted as permission to exceed the device's normal supply limits during sustained operation.
Can INA129SHKJ measure high-voltage signals?
The INA129SHKJ is suitable for measuring small differential signals presented with large common-mode voltage, including protected-input applications up to ±40 V. Its 95 dB typical common-mode rejection helps preserve accuracy when both inputs move together. Continuous overvoltage, transient duration, input leakage, and common-mode limits must still be verified before applying the maximum protected voltage.
Is INA129SHKJ suitable for strain-gauge and bridge measurements?
The INA129SHKJ is suitable for strain-gauge and resistive-bridge measurement when low offset, low input bias current, and high common-mode rejection are important. Its 25 µV typical offset and 50 nA typical bias current help limit errors in high-impedance bridge circuits. The selected gain must preserve usable bandwidth, and excitation drift and sensor self-heating should be included in the error budget.
What is the difference between INA129SHKJ and INA128SHKJ?
The INA129 and INA128 families share the precision low-power instrumentation-amplifier concept, but their external gain equations differ. The manufacturer states that the INA129-HT equation is compatible with the AD620, whereas the INA128-HT uses an industry-standard equation. Because the required gain resistor changes, an INA128 part should not be treated as a drop-in replacement without redesigning the gain network.
When should I choose INA129SHKJ over a general-purpose op amp?
Choose the INA129SHKJ when the source is differential, the common-mode voltage can be large, and gain accuracy must remain stable over a wide range. It integrates the precision functions normally assembled from several general-purpose op amps, including input bias control and common-mode rejection. A general-purpose op amp may be appropriate for lower-cost single-ended or tightly constrained applications, but it usually requires more external circuitry.
What can replace INA129SHKJ?
A replacement for INA129SHKJ must match its 8-CFP footprint, pin functions, supply range, gain equation, input-protection behavior, and temperature grade; merely having similar gain bandwidth is insufficient. The available cross-reference information confirms related INA129 and ADI-compatible options, but it does not identify enough exact-package candidates to establish a verified five-part drop-in list. Use the Request a Quote form for an engineering review of the exact proposed substitution.
What is the best cross-brand equivalent for INA129SHKJ?
The best cross-brand equivalent is the device that most closely preserves the INA129SHKJ footprint, AD620-compatible gain equation, ±18 V supply range, input protection, precision, and ceramic high-temperature package. Analog Devices' AD620-family architecture is a functional reference because the INA129 gain equation is compatible with AD620, but a compatible equation alone does not prove that a particular commercial part is pin-for-pin drop-in. Validate the candidate against the manufacturer pinout and electrical tables before substitution.

Données de référence d'ingénierie pour INA129SHKJ — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the INA129SHKJ when the design needs a differential measurement with low offset, low input bias current, high common-mode rejection, and operation across a broad temperature range. Its AD620-compatible gain equation, single-resistor gain setting, and 8-CFP ceramic package are particularly useful in harsh industrial, aerospace, and protected sensor interfaces. Select a standard low-cost instrumentation amplifier instead when the ambient temperature, input protection, package, and precision requirements are modest. Do not substitute an INA128 device without recalculating the gain resistor, because its external gain equation differs. For any cross-brand candidate, verify the physical footprint, pin functions, common-mode limits, supply range, gain equation, offset, input bias current, protection behavior, and temperature grade. A similar headline gain-bandwidth value alone is not evidence of drop-in compatibility.

Comparaison avec les alternatives

Paramètre Ce produit
Package 8-CFP ceramic flat package
Brand Texas Instruments
Number of Circuits 1 circuit
Gain Range 1 to 10,000
Gain-Bandwidth Figure 1.3 MHz
Slew Rate 4 V/µs
Input Bias Current 50 nA typical
Offset Voltage 25 µV typical
Common-Mode Rejection 95 dB typical
Input Protection ±40 V
Wide Supply Range ±18 V
Operating Temperature -55 °C to +210 °C

Principaux différenciateurs

  • High-temperature ceramic package option (vs A standard plastic SOIC instrumentation amplifier)
  • Wide protected-input capability (vs A lower-rated precision instrumentation amplifier)
  • AD620-compatible gain calculation (vs INA128SHKJ)
  • Precision offset for millivolt-level signals (vs A general-purpose precision op-amp circuit)

Notes de conception

Route the two input signals as a close-coupled differential pair and keep the external gain resistor close to the gain-setting pin. Use a ground plane, minimize input-loop area, and avoid routing sensitive inputs beside switching nodes or high-current return paths. The ceramic package requires attention to thermal expansion and solder-joint reliability, so follow the manufacturer's land pattern and reflow recommendations.

Place the supply bypass capacitors immediately across the supply and ground pins, with the shortest possible return path. Use the capacitor values and stability guidance specified in the manufacturer datasheet for the operating gain and supply configuration. Verify positive and negative supply sequencing if the surrounding system can power the rails independently, and confirm that all input and output voltages remain within their rated common-mode limits.

Do not treat the ±40 V input-protection rating as permission for continuous operation outside the normal common-mode range. Continuous voltage, fault duration, input current, and temperature can still limit safe operation. Also avoid copying an INA128 gain resistor into an INA129 design because the gain equations differ; calculate the INA129 value with the manufacturer equation and include resistor tolerance and temperature-coefficient errors.

Account for the gain-dependent reduction in usable bandwidth before selecting the highest available gain. The nominal 1.3 MHz gain-bandwidth figure does not mean every gain setting supports full bandwidth, and the 4 V/µs slew rate can become a limitation for large output steps. For sensor interfaces, filter close to the source where possible and include anti-alias filtering ahead of the ADC.

The INA129SHKJ is specified over an unusually broad -55 °C to +210 °C temperature range, but electrical limits and package stress must be checked at the actual hottest location. Estimate dissipation from the selected supply voltages, output voltage, and load current, then ensure that board construction and airflow maintain acceptable junction temperature. Use the manufacturer's thermal model rather than relying on ambient temperature alone.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer product documentation. AEC-Q100 is not applicable because this is an instrumentation amplifier rather than an automotive-qualified device.

Données vérifiées le : 2026-11-14 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

INA129SHKJ datasheet INA129SHKJ pinout INA129SHKJ datasheet pdf INA129SHKJ equivalent INA129SHKJ replacement INA129SHKJ cross reference INA129SHKJ price INA129SHKJ stock Texas Instruments INA129SHKJ INA129SHKJ 8-CFP package INA129SHKJ instrumentation amplifier INA129SHKJ gain equation

Composants & termes associés

Texas Instruments INA129SHKJ INA129-HT INA129 INA128 AD620 instrumentation amplifier differential amplifier analog signal-conditioning IC semiconductor common-mode rejection ratio CMRR gain-bandwidth product slew rate input bias current offset voltage input protection 8-CFP ceramic flat package surface mount SMD strain gauge current shunt industrial process measurement
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ