Texas Instruments

INA1651IPWR - 91dB CMRR Audio Receiver | Texas Instruments

Référence : INA1651IPWR ✓ Actif
36 V Vdss 14-pin TSSOP (PW) Package
MOQ : 1 |

INA1651IPWR Présentation

The Texas Instruments INA1651IPWR is a SoundPlus high common-mode-rejection differential audio line receiver with 91 dB CMRR, -120 dB THD+N at 1 kHz, and a 14-pin TSSOP (PW) package. It is designed for professional audio, instrumentation, and balanced-signal applications where common-mode interference and distortion must be tightly controlled.

The INA1651 is a single-channel differential line receiver in the amplifier and signal-conditioning hierarchy. A differential receiver extracts the voltage difference between two signal conductors, while its CMRR specification indicates how effectively it rejects voltage shared equally by both inputs. The SoundPlus family is optimized for high-fidelity audio paths in which low total harmonic distortion plus noise is more valuable than simply minimizing quiescent current.

Three headline operating characteristics define the device: 91 dB common-mode rejection, -120 dB total harmonic distortion plus noise at a 1 kHz test condition, and operation across a -40°C to +125°C temperature range. The exact 22-dBu signal level used for the published THD+N characterization and the wide ±18 V or 36 V total supply capability make the part relevant to balanced professional-audio equipment. Precision matching of the integrated resistors is central to maintaining CMRR performance.

The INA1651 family uses matched on-chip resistors to improve common-mode rejection beyond what a conventional resistor-network differential receiver commonly achieves. The single-channel INA1651 is intended for balanced audio inputs, while the related dual-channel INA1650 serves systems requiring two receiver channels. This architecture makes the device useful in mixers, preamplifiers, recording equipment, instrument interfaces, and other systems that carry balanced signals over cables or through grounding-prone environments.

Typical installations place the receiver at the input of an audio analog front end, followed by gain and conversion stages. In a mixer input, for example, the INA1651 can reject common-mode noise picked up by a balanced cable before the signal is amplified. Its -120 dB THD+N characteristic helps preserve low-level program material, while 91 dB CMRR helps prevent hum, ground-potential differences, and other shared-mode disturbances from being converted into differential signal errors.

Designers should follow the manufacturer pin-description table when assigning input, output, supply, and enable functions. Keep sensitive audio traces short and use a ground-return arrangement that does not force signal current through the same impedance as the receiver reference. Confirm the selected package variant, supply limits, input and output voltage limits, and decoupling requirements in the manufacturer datasheet before releasing a PCB.

This product page combines the INA1651's core audio-performance figures with application guidance, verified source links, package information, and practical selection context. It also highlights why CMRR, THD+N, supply range, and pin compatibility must be considered together when choosing a differential audio receiver for a new design.

Alternatives de remplacement direct pour INA1651IPWR — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

INA1651IPW

✅ Remplacement direct
📦 14-pin TSSOP (PW)
Identical 91 dB CMRR, -120 dB THD+N, and 14-pin TSSOP electrical and pin configuration; only the ordering suffix differs.

📋 Alternative de référence (hors catalogue)

THAT1200

✅ Remplacement direct
📦 14-pin TSSOP (PW)
Cross-brand audio receiver with pin-compatible operation; the exact suffix and parameter deltas require confirmation against the manufacturer data sheet.

📋 Alternative de référence (hors catalogue)

INA1651IPWR Valeurs maximales et caractéristiques électriques

Product Type Single-channel differential audio line receiver
Common-Mode Rejection Ratio 91 dB
Total Harmonic Distortion Plus Noise -120 dB at 1 kHz for a 22-dBu signal level
Channel Count 1 channel
Maximum Total Supply Voltage 36 V
Supply Voltage Range ±18 V
Plage de température de fonctionnement -40°C to +125°C
Boîtier 14-pin TSSOP (PW)
Type de montage Surface mount
Product Family SoundPlus
Differential Input 1 differential input
Integrated Resistor Matching Precision-matched on-chip resistors

Guide de configuration des broches du INA1651IPWR 14-pin tssop (pw)

Configuration des broches du INA1651IPWR (boîtier 14-pin tssop (pw)). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 14-pin tssop (pw) pour le INA1651IPWR

Aucune donnée de brochage détaillée disponible pour INA1651IPWR.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

INA1651IPWR convient pour 6 applications: Professional Audio Mixer Input, Balanced Recording Interface, Balanced Audio Preamplifier, Audio Measurement Instrument, Broadcast and Studio Signal Routing, Industrial Balanced-Signal Interface.

🎧

Professional Audio Mixer Input

The INA1651IPWR is suitable for the balanced input stage of a professional audio mixer because its 91 dB CMRR rejects common-mode noise present on both conductors of an unbalanced-to-balanced cable connection. The -120 dB THD+N rating at 1 kHz and 22-dBu signal level minimizes conversion of the audio waveform into harmonic distortion and noise before downstream gain and routing stages. Place the receiver near the input connector, maintain a compact ground return, and decouple the supply close to pins 4 and 7. Verify the data-sheet input common-mode range against the mixer’s nominal and fault voltages.

🎤

Balanced Recording Interface

The INA1651IPWR fits the analog input of a recording interface handling balanced line-level audio from microphones, instruments, or playback equipment. Its 91 dB common-mode rejection helps suppress shared hum and ground-potential interference before the signal reaches an ADC, while -120 dB THD+N at 1 kHz supports low-level source capture without adding conspicuous distortion. Use it for one differential channel, or use the dual-channel INA1650 where two balanced inputs are required. Layout should keep connector-to-receiver traces short and isolate converter return currents from the audio reference.

🎚️

Balanced Audio Preamplifier

The INA1651IPWR can provide the differential receiving element ahead of a low-noise preamplifier stage in professional audio equipment. Its 91 dB CMRR reduces differential signal corruption from common-mode noise on balanced interconnects, while its -120 dB THD+N at 1 kHz establishes a low-distortion input path. The receiver does not itself provide microphone gain or adjustable input gain, so source-specific amplification, biasing, and protection must follow it. Confirm the source impedance and input common-mode limits against the manufacturer electrical tables before choosing input coupling and bias networks.

📺

Audio Measurement Instrument

The INA1651IPWR is appropriate for a balanced audio measurement front end that must preserve small signal details while rejecting shared-mode noise. The 91 dB CMRR improves immunity to common interference, and the -120 dB THD+N characterization at 1 kHz is valuable when evaluating a 22-dBu audio signal. Place the receiver before the precision gain and conversion stages, use a quiet reference-ground arrangement, and avoid routing digital return currents beneath the balanced input. Validate bandwidth, output swing, and load drive against the measurement path before calibration.

🌐

Broadcast and Studio Signal Routing

The INA1651IPWR supports broadcast and studio routing equipment that accepts balanced analog audio while operating in electrically noisy environments. Its 91 dB CMRR helps keep shared-mode interference from becoming audible program corruption, and its -120 dB THD+N at 1 kHz supports transparent signal transfer at the stated 22-dBu test condition. Use short, symmetrical input routing and a continuous ground strategy near the receiver pins. For multichannel systems, the related dual-channel INA1650 can simplify matching between stereo pairs while preserving the same SoundPlus performance family.

🏭

Industrial Balanced-Signal Interface

The INA1651IPWR can serve as the differential receiver in an industrial balanced-signal interface when the signal meets the audio receiver’s input, output, and bandwidth requirements. Its 91 dB CMRR helps reject common-mode voltage from long cables and shared power systems, while the -120 dB THD+N characteristic provides low distortion for analog measurement or control signals. The -40°C to +125°C operating range supports industrial temperature designs. Add input protection, surge handling, and channel filtering as required by the installation because those functions are outside the receiver’s core specification.

Récapitulatif des produits recommandés

INA1651IPW Pin-compatible single-channel SoundPlus receiver Utilisé dans : Professional Audio Mixer Input, Balanced Recording Interface, Balanced Audio Preamplifier, Audio Measurement Instrument, Broadcast and Studio Signal Routing, Industrial Balanced-Signal Interface INA1650IPWR Texas Instruments Utilisé dans : Professional Audio Mixer Input, Balanced Audio Preamplifier, Broadcast and Studio Signal Routing ADS1262IPW Texas Instruments Utilisé dans : Balanced Recording Interface, Audio Measurement Instrument, Industrial Balanced-Signal Interface
What are the key specifications of INA1651IPWR that engineers should know?
The INA1651IPWR is a single-channel differential audio line receiver with 91 dB CMRR and -120 dB THD+N at 1 kHz for a 22-dBu signal level. According to the Texas Instruments INA1651 data sheet, it operates from -40°C to +125°C and is offered in a 14-pin TSSOP (PW) package. Its matched on-chip resistors support consistent common-mode rejection, while its wide supply capability makes it appropriate for professional audio and balanced-signal systems.
What is the operating voltage of INA1651IPWR?
The INA1651IPWR supports a total supply range up to 36 V, equivalent to ±18 V operation. According to the Texas Instruments INA1651 data sheet, the INA1651 family is designed for high-voltage audio signal paths. Designers must also observe the exact input common-mode and output swing limits stated in the manufacturer data sheet, because the total supply rating alone does not permit every input or output voltage.
What does 91 dB CMRR mean for the INA1651?
A common-mode rejection ratio of 91 dB means that equal voltage appearing on both differential inputs is strongly attenuated at the output. According to the Texas Instruments INA1651 product information, the INA1651 achieves 91 dB CMRR using precisely matched on-chip resistors. This behavior helps suppress shared disturbances such as hum or ground-potential differences in balanced professional-audio cabling while preserving the differential program signal.
How low is the distortion of INA1651IPWR?
The INA1651IPWR provides -120 dB THD+N at 1 kHz for a 22-dBu signal level. According to the Texas Instruments INA1651 data sheet, this ultra-low distortion supports high-fidelity audio paths where signal-level integrity and low noise are critical. The stated THD+N result is a specific test condition rather than a guarantee for every frequency, output amplitude, load, and supply configuration.
Where can I download the INA1651IPWR datasheet PDF?
The INA1651IPWR datasheet PDF is available through the official Texas Instruments document link on this page and through the INA1651 product page. The manufacturer data sheet contains the recommended application circuit, electrical characteristics, package drawings, pin descriptions, and ordering information. Use the manufacturer document for design decisions because third-party copies can be outdated or reflect an earlier revision.
Where can I find the INA1651IPWR pinout?
The INA1651IPWR pinout is documented in the pin-configuration section of the Texas Instruments INA1651 data sheet. The exact MPN uses the PW package with 14 pins, as identified by the manufacturer part-details page. Use the pin-description and package drawings to map supply, ground, input, output, and control functions before laying out a board or designing a replacement footprint.
Is INA1651IPWR suitable for professional audio equipment?
Yes, the INA1651IPWR is suitable for professional balanced-audio receivers because it combines 91 dB CMRR with -120 dB THD+N at 1 kHz. According to the Texas Instruments INA1651 data sheet, its matched integrated resistors are intended to improve rejection of common-mode noise. The device can be used in mixer inputs, preamplifiers, recording interfaces, and balanced instrumentation when the signal and supply conditions remain within the data-sheet limits.
When should I choose INA1651IPWR over a generic differential receiver?
Choose INA1651IPWR when low distortion and strong common-mode rejection are the primary requirements for a balanced audio input. Its published 91 dB CMRR and -120 dB THD+N at 1 kHz are more specifically characterized for high-fidelity audio than a generic differential receiver. Consider a standard op-amp difference circuit only when its distortion, noise, CMRR, input range, and stability behavior have been verified for the same signal conditions.
What can replace INA1651IPWR?
INA1651IPW is the closest published drop-in replacement for INA1651IPWR because it has the same INA1651 function and 14-pin TSSOP package without requiring circuit changes. The cross-reference information identifies it as a complete replacement with consistent terminals and packages. Other compatible receiver families may differ in pin assignment or electrical architecture, so verify the manufacturer comparison table before treating them as drop-in replacements.
Is INA1651IPW the same as INA1651IPWR?
INA1651IPW and INA1651IPWR provide the same INA1651 receiver function in the same 14-pin TSSOP package, with INA1651IPWR using the IPW ordering suffix for the specified shipment format. The published comparison identifies INA1651IPW as a complete replacement for INA1651IPWR because its terminals, package, and principal functional characteristics are consistent. Confirm reel orientation and moisture handling requirements during procurement.
What is the best cross-brand equivalent for INA1651IPWR?
The closest cross-brand candidates identified are the THAT1200 series, which is described as pin-compatible with INA1651IPWR. However, the exact THAT Corporation ordering suffix, package, and detailed electrical differences must be checked against the INA1651 data sheet before substitution. Use the manufacturer comparison tables for CMRR, distortion, supply range, input range, output swing, and exact pin assignment rather than relying on function-family similarity alone.
INA1651IPWR vs INA1620 — which is better for a balanced audio input?
INA1651IPWR is the stronger direct choice when the design specifically needs the published 91 dB CMRR and -120 dB THD+N performance of the INA1651 SoundPlus family. INA1620 is an op-amp-based differential receiver identified as a compatible alternative, but it is not established here as a package- and pin-identical drop-in replacement. Compare its channel topology, pin assignment, voltage range, CMRR, distortion, and stability requirements before selecting it.
Can INA1651IPWR be used for a balanced microphone or instrument input?
The INA1651IPWR can serve as the differential receiver stage in a balanced audio or instrumentation system when the source amplitude, common-mode voltage, impedance, and bandwidth satisfy the data-sheet limits. Its 91 dB CMRR helps reject shared interference, and its -120 dB THD+N supports high-fidelity signal handling. A microphone preamplifier may require additional low-noise gain, input biasing, protection, and gain-control circuitry not contained in the receiver.
How should decoupling be designed around INA1651IPWR?
Place the supply bypass capacitors directly beside the INA1651IPWR power and ground pins, following the reference layout and capacitor values in the Texas Instruments data sheet. Keep the input and output return paths compact so ground current does not share the same impedance as the audio reference. For a balanced audio board, maintain symmetrical input routing where practical and keep switching converters and high-current return paths away from sensitive input traces.
Where can I buy INA1651IPWR and what is its lead time?
Use the Request a Quote form on this page to ask for INA1651IPWR availability, current lead time, and a quotation for the required quantity. The part is a single-channel, 14-pin TSSOP audio receiver from Texas Instruments, and its ordering code is INA1651IPWR. The form allows the buyer and XAIPART to confirm current manufacturing position, shipment packaging, and lead time for the specific order.

Données de référence d'ingénierie pour INA1651IPWR — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose INA1651IPWR for a precision balanced-audio receiver when low distortion and common-mode rejection are primary requirements, especially in professional audio, recording, broadcast, and instrumentation systems. Its published 91 dB CMRR and -120 dB THD+N at 1 kHz make it suitable when the signal path must preserve low-level content while rejecting shared-mode interference. INA1651IPW is the preferred substitute when procurement, reel configuration, or commercial availability requires another ordering suffix; it retains the same 14-pin TSSOP construction and principal performance ratings. Consider THAT1200 only after verifying its exact suffix, pin mapping, supply limits, CMRR, distortion, and output swing against the INA1651 data sheet. A generic operational-amplifier difference circuit should be chosen only after its CMRR, distortion, noise, stability, input range, and output-drive behavior have been characterized under the same conditions.

Comparaison avec les alternatives

Paramètre Ce produit INA1651IPW THAT1200
Brand Texas Instruments Texas Instruments THAT Corporation
Package 14-pin TSSOP (PW) 14-pin TSSOP (PW) 14-pin TSSOP-compatible package
Product Family SoundPlus SoundPlus THAT Corporation audio receiver
Input Topology Differential line receiver Differential line receiver Differential audio receiver

Principaux différenciateurs

  • Published high-fidelity distortion performance (vs THAT1200)
  • Strong common-mode rejection (vs THAT1200)
  • Exact same-family drop-in choice (vs INA1651IPW)

Notes de conception

Route the two inputs of each balanced channel as a closely coupled pair and return them to the receiver through a low-impedance reference path. The INA1651 uses matched on-chip resistors for 91 dB CMRR, but PCB resistance between the input pins and source can unbalance the signal and reduce real-world rejection. Keep the input network symmetrical, place protection devices with consistent impedances on both conductors, and avoid routing inputs beside switching nodes or high-current return paths.

Follow the Texas Instruments recommended supply-bypass configuration and place the capacitors directly across the INA1651 power and ground pins. The device supports a total supply of up to 36 V, but the local supply must remain within all absolute-maximum and operating limits. Decouple each analog supply rail locally, preserve a continuous ground reference, and prevent ground current from the output and supply circuitry from sharing the sensitive input-return impedance.

Treat the INA1651 as a precision audio input rather than a general-purpose logic buffer. Check source impedance, input common-mode voltage, output loading, and bandwidth against the manufacturer electrical characteristics before fixing the surrounding network. The published -120 dB THD+N result applies at 1 kHz and a 22-dBu signal level; it should not be interpreted as a limit for every signal level, frequency, or load. Terminate unused channels and outputs only as directed by the data sheet.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The INA1651IPWR is an integrated circuit for industrial and professional audio equipment. AEC-Q100 is not an applicable qualification category for this device, while the remaining compliance fields require confirmation from the manufacturer product documentation or declaration.

Recherches associées

INA1651IPWR datasheet INA1651IPWR pinout INA1651IPWR datasheet pdf INA1651IPWR equivalent INA1651IPWR replacement INA1651IPWR cross reference INA1651IPWR TSSOP-14 INA1651IPWR 91dB CMRR INA1651IPWR -120dB THD+N INA1651IPWR audio receiver INA1651IPWR price INA1651IPWR stock Texas Instruments INA1651IPWR INA1651IPWR vs THAT1200 INA1651 balanced receiver application circuit

Composants & termes associés

Texas Instruments INA1651IPWR INA1651IPW THAT1200 INA1650 SoundPlus audio line receiver differential receiver amplifier IC signal conditioning semiconductor common-mode rejection ratio CMRR total harmonic distortion plus noise THD+N balanced audio professional audio recording interface audio mixer 14-pin TSSOP PW package surface mount matched on-chip resistors Texas Instruments INA1651
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ