INA1651IPWR - 91dB CMRR Audio Receiver | Texas Instruments
MPN: INA1651IPWR ✓ AktifINA1651IPWR Genel Bakış
The INA1651 is a single-channel differential line receiver in the amplifier and signal-conditioning hierarchy. A differential receiver extracts the voltage difference between two signal conductors, while its CMRR specification indicates how effectively it rejects voltage shared equally by both inputs. The SoundPlus family is optimized for high-fidelity audio paths in which low total harmonic distortion plus noise is more valuable than simply minimizing quiescent current.
Three headline operating characteristics define the device: 91 dB common-mode rejection, -120 dB total harmonic distortion plus noise at a 1 kHz test condition, and operation across a -40°C to +125°C temperature range. The exact 22-dBu signal level used for the published THD+N characterization and the wide ±18 V or 36 V total supply capability make the part relevant to balanced professional-audio equipment. Precision matching of the integrated resistors is central to maintaining CMRR performance.
The INA1651 family uses matched on-chip resistors to improve common-mode rejection beyond what a conventional resistor-network differential receiver commonly achieves. The single-channel INA1651 is intended for balanced audio inputs, while the related dual-channel INA1650 serves systems requiring two receiver channels. This architecture makes the device useful in mixers, preamplifiers, recording equipment, instrument interfaces, and other systems that carry balanced signals over cables or through grounding-prone environments.
Typical installations place the receiver at the input of an audio analog front end, followed by gain and conversion stages. In a mixer input, for example, the INA1651 can reject common-mode noise picked up by a balanced cable before the signal is amplified. Its -120 dB THD+N characteristic helps preserve low-level program material, while 91 dB CMRR helps prevent hum, ground-potential differences, and other shared-mode disturbances from being converted into differential signal errors.
Designers should follow the manufacturer pin-description table when assigning input, output, supply, and enable functions. Keep sensitive audio traces short and use a ground-return arrangement that does not force signal current through the same impedance as the receiver reference. Confirm the selected package variant, supply limits, input and output voltage limits, and decoupling requirements in the manufacturer datasheet before releasing a PCB.
This product page combines the INA1651's core audio-performance figures with application guidance, verified source links, package information, and practical selection context. It also highlights why CMRR, THD+N, supply range, and pin compatibility must be considered together when choosing a differential audio receiver for a new design.
Drop-in alternatifler için INA1651IPWR — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
INA1651IPW
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
THAT1200
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
INA1651IPWR Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | Single-channel differential audio line receiver |
| Common-Mode Rejection Ratio | 91 dB |
| Total Harmonic Distortion Plus Noise | -120 dB at 1 kHz for a 22-dBu signal level |
| Channel Count | 1 channel |
| Maximum Total Supply Voltage | 36 V |
| Supply Voltage Range | ±18 V |
| İşletim Sıcaklığı Aralığı | -40°C to +125°C |
| Paket | 14-pin TSSOP (PW) |
| Montaj Türü | Surface mount |
| Product Family | SoundPlus |
| Differential Input | 1 differential input |
| Integrated Resistor Matching | Precision-matched on-chip resistors |
INA1651IPWR 14-pin tssop (pw) Pin Yapısı Kılavuzu
INA1651IPWR (14-pin tssop (pw) paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: INA1651IPWR.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
INA1651IPWR için uygundur 6 uygulamas: Professional Audio Mixer Input, Balanced Recording Interface, Balanced Audio Preamplifier, Audio Measurement Instrument, Broadcast and Studio Signal Routing, Industrial Balanced-Signal Interface.
Professional Audio Mixer Input
The INA1651IPWR is suitable for the balanced input stage of a professional audio mixer because its 91 dB CMRR rejects common-mode noise present on both conductors of an unbalanced-to-balanced cable connection. The -120 dB THD+N rating at 1 kHz and 22-dBu signal level minimizes conversion of the audio waveform into harmonic distortion and noise before downstream gain and routing stages. Place the receiver near the input connector, maintain a compact ground return, and decouple the supply close to pins 4 and 7. Verify the data-sheet input common-mode range against the mixer’s nominal and fault voltages.
Önerilen
Balanced Recording Interface
The INA1651IPWR fits the analog input of a recording interface handling balanced line-level audio from microphones, instruments, or playback equipment. Its 91 dB common-mode rejection helps suppress shared hum and ground-potential interference before the signal reaches an ADC, while -120 dB THD+N at 1 kHz supports low-level source capture without adding conspicuous distortion. Use it for one differential channel, or use the dual-channel INA1650 where two balanced inputs are required. Layout should keep connector-to-receiver traces short and isolate converter return currents from the audio reference.
Önerilen
Balanced Audio Preamplifier
The INA1651IPWR can provide the differential receiving element ahead of a low-noise preamplifier stage in professional audio equipment. Its 91 dB CMRR reduces differential signal corruption from common-mode noise on balanced interconnects, while its -120 dB THD+N at 1 kHz establishes a low-distortion input path. The receiver does not itself provide microphone gain or adjustable input gain, so source-specific amplification, biasing, and protection must follow it. Confirm the source impedance and input common-mode limits against the manufacturer electrical tables before choosing input coupling and bias networks.
Önerilen
Audio Measurement Instrument
The INA1651IPWR is appropriate for a balanced audio measurement front end that must preserve small signal details while rejecting shared-mode noise. The 91 dB CMRR improves immunity to common interference, and the -120 dB THD+N characterization at 1 kHz is valuable when evaluating a 22-dBu audio signal. Place the receiver before the precision gain and conversion stages, use a quiet reference-ground arrangement, and avoid routing digital return currents beneath the balanced input. Validate bandwidth, output swing, and load drive against the measurement path before calibration.
Önerilen
Broadcast and Studio Signal Routing
The INA1651IPWR supports broadcast and studio routing equipment that accepts balanced analog audio while operating in electrically noisy environments. Its 91 dB CMRR helps keep shared-mode interference from becoming audible program corruption, and its -120 dB THD+N at 1 kHz supports transparent signal transfer at the stated 22-dBu test condition. Use short, symmetrical input routing and a continuous ground strategy near the receiver pins. For multichannel systems, the related dual-channel INA1650 can simplify matching between stereo pairs while preserving the same SoundPlus performance family.
Önerilen
Industrial Balanced-Signal Interface
The INA1651IPWR can serve as the differential receiver in an industrial balanced-signal interface when the signal meets the audio receiver’s input, output, and bandwidth requirements. Its 91 dB CMRR helps reject common-mode voltage from long cables and shared power systems, while the -120 dB THD+N characteristic provides low distortion for analog measurement or control signals. The -40°C to +125°C operating range supports industrial temperature designs. Add input protection, surge handling, and channel filtering as required by the installation because those functions are outside the receiver’s core specification.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: INA1651IPWR — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | INA1651IPW | THAT1200 |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | THAT Corporation |
| Package | 14-pin TSSOP (PW) | 14-pin TSSOP (PW) | 14-pin TSSOP-compatible package |
| Product Family | SoundPlus | SoundPlus | THAT Corporation audio receiver |
| Input Topology | Differential line receiver | Differential line receiver | Differential audio receiver |
Ana Farklılayıcılar
- Published high-fidelity distortion performance (karşılaştırma:THAT1200)
- Strong common-mode rejection (karşılaştırma:THAT1200)
- Exact same-family drop-in choice (karşılaştırma:INA1651IPW)
Tasarım Notları
Route the two inputs of each balanced channel as a closely coupled pair and return them to the receiver through a low-impedance reference path. The INA1651 uses matched on-chip resistors for 91 dB CMRR, but PCB resistance between the input pins and source can unbalance the signal and reduce real-world rejection. Keep the input network symmetrical, place protection devices with consistent impedances on both conductors, and avoid routing inputs beside switching nodes or high-current return paths.
Follow the Texas Instruments recommended supply-bypass configuration and place the capacitors directly across the INA1651 power and ground pins. The device supports a total supply of up to 36 V, but the local supply must remain within all absolute-maximum and operating limits. Decouple each analog supply rail locally, preserve a continuous ground reference, and prevent ground current from the output and supply circuitry from sharing the sensitive input-return impedance.
Treat the INA1651 as a precision audio input rather than a general-purpose logic buffer. Check source impedance, input common-mode voltage, output loading, and bandwidth against the manufacturer electrical characteristics before fixing the surrounding network. The published -120 dB THD+N result applies at 1 kHz and a 22-dBu signal level; it should not be interpreted as a limit for every signal level, frequency, or load. Terminate unused channels and outputs only as directed by the data sheet.
Uyumluluk Bilgisi
The INA1651IPWR is an integrated circuit for industrial and professional audio equipment. AEC-Q100 is not an applicable qualification category for this device, while the remaining compliance fields require confirmation from the manufacturer product documentation or declaration.