IR3889MTRPBF - 30A Sync Buck Regulator | Infineon | POL
Référence : IR3889MTRPBF ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $2.4 | $2,40 |
| 10 | $2.16 | $21,60 |
| 100 | $1.98 | $198,00 |
| 500 | $1.86 | $930,00 |
| 1 000 | $1.82 | $1 820,00 |
IR3889MTRPBF Présentation
A synchronous buck converter is a DC-DC step-down regulator that uses a high-side and low-side MOSFET instead of a diode to reduce conduction losses, making it the preferred topology for high-current point-of-load conversion. The IR3889 belongs to the power management IC hierarchy: IPOL -> integrated power stage -> DC-DC converter -> voltage regulator. It integrates the PWM controller, OptiMOS power MOSFETs, and bootstrap diode, minimizing external component count.
Key features include a fast Constant-On-Time (COT) control engine that eliminates complex loop compensation and achieves rapid transient response, stability with ceramic output capacitors, and a precision 0.8V +/-0.5% reference. The output voltage is adjustable from 0.5V to 0.875 x VIN.
Technically, the enhanced COT scheme simplifies design while providing fast control response to load steps typical of FPGA and processor cores. The integrated OptiMOS FETs deliver high efficiency at 30A, and the QFN exposed pad provides low thermal resistance for heat extraction into the PCB copper pour.
Typical applications include 30A POL rails for networking switches, servers, storage systems, and telecom infrastructure powering FPGAs, ASICs, and DSPs. Pricing starts at approximately $1.82 (as of 2026-08-29, LCSC).
Design tip: solder the exposed pad to a large copper area; at 30A loads, thermal management and minimum output capacitance per the datasheet are critical for stability.
Alternatives de remplacement direct pour IR3889MTRPBF — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
IR3889MTRPBFAUMA1
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
IR3890MTRPBF
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
IR3891MTRPBF
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
IR3878MTRPBF
⚡ Même boîtier ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
IR3889MTRPBF Valeurs maximales et caractéristiques électriques
| Topologie | Synchronous Buck (IPOL) |
| Courant de sortie maximal | 30 A continuous |
| Input Voltage Range (single supply) | 4.3 V to 17 V |
| Input Voltage Range (external VCC) | 2.0 V to 17 V |
| Tension de référence | 0.8 V +/- 0.5% |
| Plage de tension de sortie | 0.5 V to 0.875 x VIN (adjustable) |
| Control Scheme | Enhanced Constant-On-Time (COT) |
| Integrated MOSFETs | OptiMOS high-side and low-side |
| Bootstrap Diode | Integrated |
| Ceramic Output Capacitor Stability | Yes |
| Boîtier | PG-IQFN-31, 5 x 6 mm, pitch 0.5 mm |
| Type de montage | Surface Mount |
| Protection Features | Overcurrent, overvoltage, overtemperature |
| Product Family | OptiMOS IPOL / POWIRstage |
| Statut RoHS | Compliant (Pb-free suffix PBF) |
Guide de configuration des broches du IR3889MTRPBF pg-iqfn-31, 5 x 6 mm, pitch 0.5 mm
Configuration des broches du IR3889MTRPBF (boîtier pg-iqfn-31, 5 x 6 mm, pitch 0.5 mm). Ce composant de puissance comporte des bornes de grille, de drain et de source. Pour les boîtiers non polarisés, consultez la fiche technique du fabricant pour l'orientation exacte de la broche 1 et les détails de l'empreinte. Les applications courantes incluent la conception d'alimentations, la commande de moteurs et la commutation de charges.
Aucune donnée de brochage détaillée disponible pour IR3889MTRPBF.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
IR3889MTRPBF convient pour 6 applications: FPGA Core Power Supply, Server and Data Center POL, Networking and Telecom Equipment, Storage Systems, Industrial Automation Control, Automotive Domain Controllers.
FPGA Core Power Supply
The IR3889MTRPBF powers FPGA core rails (typically 0.85V to 1.0V at 20-30A) where its 30A continuous rating and 0.8V +/-0.5% reference meet tight core-voltage accuracy windows. The enhanced fast COT engine reacts to millisecond-scale load steps during fabric switching without external compensation, and ceramic-only output capacitance keeps the solution compact near the FPGA BGA footprint.
Recommandé
Server and Data Center POL
In server motherboards, the IR3889MTRPBF converts 12V intermediate bus voltages down to point-of-load rails for ASICs, memory controllers, and SoCs. Its 4.3V-17V single-supply input accepts 12V rails directly, integrated OptiMOS FETs maximize conversion efficiency at 30A to reduce heat in dense racks, and the 5x6mm IQFN conserves board area on multi-rail power trees.
Recommandé
Networking and Telecom Equipment
Switch, router, and baseband line cards draw high continuous current on DSP and PHY rails. The IR3889MTRPBF's COT control provides fast transient response to bursty network traffic loads, overcurrent/overvoltage/overtemperature protection safeguards 24/7 operation, and the 2.0V-17V input range with external VCC accommodates varied telecom intermediate bus architectures.
Recommandé
Storage Systems
Enterprise SSD and HDD controller rails demand reliable high-current POL conversion with minimal board space. The IR3889MTRPBF's integrated bootstrap diode and MOSFETs reduce external parts, ceramic-capacitor stability improves long-term reliability versus electrolytic solutions, and its protection suite (OCP, OVP, OTP) protects storage silicon during fault events such as hot-plug transients.
Recommandé
Industrial Automation Control
PLC I/O modules and motor-control boards use the IR3889MTRPBF to derive 1-3.3V logic rails from 12V or 24V-derated industrial buses. Its wide input tolerance absorbs bus sag and surge, the PG-IQFN-31 exposed pad withstands vibration-reliable reflow onto heavy copper, and the -40C industrial ambient capability of the family supports unconditioned factory floor environments.
Recommandé
Automotive Domain Controllers
Using the AEC-grade IR3889MTRPBFAUMA1 variant, automotive ECU and domain-controller boards power ADAS SoCs and radar processors. The shared die and PG-IQFN-31 footprint with the standard IR3889MTRPBF lets one PCB layout serve both automotive and industrial product lines, while the enhanced COT response handles sharp SoC load transitions during sensor fusion bursts.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour IR3889MTRPBF — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | IR3889MTRPBFAUMA1 | IR3890MTRPBF | IR3891MTRPBF |
|---|---|---|---|---|
| Package | PG-IQFN-31 (5x6mm) | PG-IQFN-31 (5x6mm) - same | PG-IQFN-31 (5x6mm) - same | PG-IQFN-31 (5x6mm) - same |
| Brand | Infineon | Infineon | Infineon | Infineon |
| Output Current | 30 A | 30 A | 15 A | 10 A |
| Reference Voltage | 0.8 V +/- 0.5% | 0.8 V +/- 0.5% | 0.8 V +/- 0.5% | 0.8 V +/- 0.5% |
| Control Scheme | Enhanced fast COT | Enhanced fast COT | Enhanced fast COT | Enhanced fast COT |
| Quality Flow | Industrial/consumer | Automotive (AUMA1) | Industrial/consumer | Industrial/consumer |
Principaux différenciateurs
- Highest current in same IQFN-31 footprint (vs IR3890MTRPBF)
- Automotive drop-in option (vs IR3889MTRPBFAUMA1)
- Ceramic-capacitor stability with COT (vs IR3891MTRPBF)
Notes de conception
At 30A output, conduction losses in the integrated OptiMOS FETs are the dominant heat source. Solder the PG-IQFN-31 exposed pad to a minimum of 2 oz copper with an array of thermal vias to internal planes. Derate output current per the datasheet thermal curves at elevated ambient; verify junction temperature at worst-case load and 70C ambient.
Keep the input capacitor loop (VIN to PGND) as small as possible - high di/dt in this loop drives EMI and voltage spikes. Place the output inductor and ceramic output capacitors close to the LX and VOUT pins. Follow Infineon's IR3889 evaluation board layout (per datasheet v02_06) as a reference for star-grounding PGND and SGND.
The enhanced COT engine requires a minimum effective output capacitance for stability - do not reduce ceramic caps below the datasheet minimum to save BOM cost. When using the 2.0V-17V input mode, apply external VCC before or with VIN per the datasheet power-up sequence to avoid undefined startup states.
Informations de conformité
PBF (Pb-free) suffix indicates lead-free, RoHS-compliant construction per Infineon part nomenclature. Automotive applications should use IR3889MTRPBFAUMA1.
