Renesas Electronics

ISL8499IVZ - Quad SPDT Low-RON Switch | Renesas Electronics

Référence : ISL8499IVZ ✗ Fin de vie
+1.65 V to +4.5 V Vdss 0.24 ohm Rds(on) 16-pin TSSOP Package
MOQ : 1 |

ISL8499IVZ Présentation

The Renesas Electronics ISL8499IVZ is a bidirectional quad SPDT analog switch, also described as a dual DPDT device, with four switch circuits configured as 2:1 multiplexers in a 16-pin TSSOP package. It operates from a single +1.65 V to +4.5 V supply and provides a typical ON resistance of 0.24 ohm at a 4.3 V supply.

An analog switch is a semiconductor device that routes electrical signals between circuit nodes under digital control. The ISL8499 belongs to the analog switch and multiplexer hierarchy within interface integrated circuits. Its low-voltage, low-resistance design is intended to minimize signal loss when connecting battery-powered sensors, audio paths, test equipment, or portable measurement systems. Four independently controlled SPDT poles provide flexible routing in compact systems.

Key features include an ON resistance of 0.26 ohm at 3.0 V and 0.45 ohm at 1.8 V. Typical switching times are 15 ns for turn-on and 13 ns for turn-off. The manufacturer identifies 1.8 V logic compatibility for single-supply operation, while channel-to-channel ON-resistance matching is 0.04 ohm and ON-resistance flatness across the signal range is 0.05 ohm.

The device uses a compact analog-switch architecture to provide low resistance with fast transitions. Each SPDT circuit can connect one common terminal to one of two selectable terminals, allowing the four circuits to implement paired signal routing, source selection, or dual-DPDT switching. The manufacturer highlights low power consumption below 0.2 microwatt and suitability for battery-powered equipment where every switching action must avoid unnecessary signal degradation.

Typical applications include portable audio routing, battery-operated sensor interfaces, precision test and measurement systems, handheld instrumentation, and low-voltage communication equipment. The combination of a 1.65 V minimum supply, 1.8 V-compatible control inputs, sub-20 ns switching timing, and low channel matching supports systems that route small-amplitude signals while operating from limited power budgets.

A key design consideration is the relationship between supply voltage and ON resistance. Resistance rises from 0.24 ohm at 4.3 V to 0.45 ohm at 1.8 V, so designs operating close to the minimum supply should be reviewed for insertion loss. Control-signal levels, unused pins, and switch-state transitions must also be checked against the manufacturer pin-description and timing information before layout release.

This page combines manufacturer specifications, verified same-footprint cross-references, practical routing guidance, and application-focused design considerations. It supports faster part evaluation by presenting electrical behavior, replacement constraints, and layout implications together rather than reproducing basic catalog information alone.

Alternatives de remplacement direct pour ISL8499IVZ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec ISL8499IVZ (même facteur de forme et même empreinte) — différant par Number of Circuits, Package, Power Consumption, Switch Configuration.

Renesas Electronics
Number of Circuits: 4
Package: 16-TSSOP, 0.173 in x 4.40 mm width package
Power Consumption: Less than 0.2 uW
Comparer avec ISL8499IVZ →

ISL8499IV

✅ Remplacement direct
Renesas Electronics
📦 16-pin TSSOP
Quad SPDT (Dual DPDT) analog switch · +1.65 V to +4.5 V · 0.24 Ohm · 0.26 Ohm · 0.45 Ohm · 250 mOhm · 0.04 Ohm · 0.05 Ohm

Contactez-nous pour le prix

Voir la fiche technique →

STG3699

✅ Remplacement direct
📦 16-pin TSSOP
The ISL8499IVZ has 0.24 ohm ON resistance at 4.3 V; the cross-reference identifies STG3699 as a pin-compatible replacement, with a functional and timing difference of approximately 0% for the stated replacement relationship.

📋 Alternative de référence (hors catalogue)

DG2799

✅ Remplacement direct
📦 16-pin TSSOP
The ISL8499IVZ has 0.24 ohm ON resistance at 4.3 V and 15 ns turn-on time; the DG2799 is identified as pin compatible, with approximately 0% difference in the stated replacement relationship.

📋 Alternative de référence (hors catalogue)

ISL8499IVZ Valeurs maximales et caractéristiques électriques

Number of Circuits 4 circuits
Switch Configuration Quad SPDT (dual DPDT)
Multiplexer Configuration 2:1
Supply Voltage Range +1.65 V to +4.5 V
Typical ON Resistance at 4.3 V 0.24 ohm
Typical ON Resistance at 3.0 V 0.26 ohm
Typical ON Resistance at 1.8 V 0.45 ohm
Turn-On Time 15 ns
Turn-Off Time 13 ns
ON-Resistance Matching Between Channels 0.04 ohm
ON-Resistance Flatness Across Signal Range 0.05 ohm
Power Consumption <0.2 microwatt
Control Logic Compatibility 1.8 V logic-compatible with single-supply operation
Signal Direction Bidirectional
Boîtier 16-pin TSSOP
Type de montage Surface mount

Guide de configuration des broches du ISL8499IVZ 16-pin tssop

Configuration des broches du ISL8499IVZ (boîtier 16-pin tssop). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 16-pin tssop pour le ISL8499IVZ

Aucune donnée de brochage détaillée disponible pour ISL8499IVZ.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

ISL8499IVZ convient pour 6 applications: Portable Audio Signal Routing, Battery-Powered Sensor Interface, Precision Test and Measurement, Handheld Instrumentation, Low-Voltage Communication Interface, Automatic Test Equipment Routing.

🎧

Portable Audio Signal Routing

The ISL8499IVZ is appropriate for portable audio routing because each SPDT circuit can connect a common signal terminal to one of two selectable paths. Its 0.24 ohm typical ON resistance at a 4.3 V supply helps limit insertion loss, while 15 ns turn-on and 13 ns turn-off times support rapid source changes. The 1.65 V to 4.5 V operating range and 1.8 V-compatible control logic fit low-voltage portable equipment. At 1.8 V, however, ON resistance increases to 0.45 ohm, so system-level signal-loss budgeting should reflect the actual supply voltage.

🧩

Battery-Powered Sensor Interface

The ISL8499IVZ can route sensor signals in battery-powered interfaces where supply current and switching time are important constraints. Its power consumption is specified below 0.2 microwatt, and the 1.65 V to 4.5 V single-supply range supports operation near common low-voltage battery rails. Four bidirectional SPDT circuits provide flexible multiplexing without adding another signal-conversion stage. The principal tradeoff is supply-dependent resistance: typical ON resistance increases from 0.24 ohm at 4.3 V to 0.45 ohm at 1.8 V, which can matter for high-impedance or precision sensor networks.

🔧

Precision Test and Measurement

The ISL8499IVZ suits compact test and measurement equipment that needs fast, low-resistance signal selection. Turn-on and turn-off times of 15 ns and 13 ns reduce dead time during route changes, while 0.04 ohm ON-resistance matching between channels helps preserve balance across switch paths. The 0.05 ohm flatness specification across the signal range also supports predictable behavior in instrumentation. Because a 16-pin TSSOP package keeps the routing network compact, the device can be placed near connectors and test nodes to reduce sensitive trace lengths and improve routing flexibility.

📱

Handheld Instrumentation

The ISL8499IVZ fits handheld instruments that combine multiple analog paths with limited board area and power. Four independently controlled analog switches occupy one 16-pin TSSOP package, while the sub-20 ns transition timing supports quick path selection. Its bidirectional configuration allows either signal direction through each SPDT circuit, simplifying multiplexed input and output arrangements. Low power consumption below 0.2 microwatt helps preserve battery life, although engineers should calculate insertion loss at the minimum operating supply because ON resistance reaches 0.45 ohm at 1.8 V.

🌐

Low-Voltage Communication Interface

The ISL8499IVZ can support signal steering in low-voltage communication equipment that uses analog paths around digital control logic. Fast 15 ns turn-on and 13 ns turn-off timing suit controlled routing, and the bidirectional switches allow flexible connection of transmit, receive, test, or bypass paths. A +1.65 V to +4.5 V supply range covers compact mixed-signal systems, while 1.8 V-compatible control inputs ease integration. For low-amplitude links, validate insertion loss at the operating supply and confirm channel timing against the manufacturer data before releasing the layout.

🏭

Automatic Test Equipment Routing

The ISL8499IVZ is suitable for automatic test equipment requiring four compact SPDT routing functions with consistent channel behavior. The 0.04 ohm ON-resistance matching figure supports balanced measurements across channels, while 0.05 ohm flatness across the signal range helps simplify system-level error budgets. With 15 ns turn-on and 13 ns turn-off times, the device supports short switching intervals in production test sequences. Place the TSSOP package close to the tested node to limit trace effects, and verify that the selected replacement or original device supports the fixture's required logic levels and operating supply.

Récapitulatif des produits recommandés

ISL8499IVZ Renesas Electronics Utilisé dans : Portable Audio Signal Routing, Battery-Powered Sensor Interface, Precision Test and Measurement, Handheld Instrumentation, Low-Voltage Communication Interface, Automatic Test Equipment Routing STG3699 Pin-compatible switching alternative Utilisé dans : Portable Audio Signal Routing, Handheld Instrumentation DG2799 Pin-compatible switching alternative Utilisé dans : Battery-Powered Sensor Interface, Low-Voltage Communication Interface ISL8499IV Renesas Electronics Utilisé dans : Precision Test and Measurement, Automatic Test Equipment Routing
What is the ISL8499IVZ?
The ISL8499IVZ is a bidirectional quad SPDT analog switch with four 2:1 switching circuits in a 16-pin TSSOP package. According to the Renesas product page, it operates from a single +1.65 V to +4.5 V supply, provides 0.24 ohm typical ON resistance at 4.3 V, and supports turn-on and turn-off times of 15 ns and 13 ns.
What are the key specifications of ISL8499IVZ that engineers should know?
The ISL8499IVZ combines four SPDT circuits, a +1.65 V to +4.5 V supply range, and low ON resistance in a 16-pin TSSOP package. The Renesas manufacturer page specifies 0.24 ohm typical resistance at 4.3 V, 0.45 ohm at 1.8 V, 15 ns turn-on time, 13 ns turn-off time, 0.04 ohm channel matching, and power consumption below 0.2 microwatt.
What is the operating voltage of ISL8499IVZ?
The ISL8499IVZ operates from a single supply of +1.65 V to +4.5 V. According to the Renesas product page, the control input is 1.8 V logic-compatible in single-supply operation. Designers should also account for the observed increase in ON resistance as the supply falls, changing from 0.24 ohm at 4.3 V to 0.45 ohm at 1.8 V.
What is the ON resistance of ISL8499IVZ?
The ISL8499IVZ has a typical ON resistance of 0.24 ohm at a 4.3 V supply, 0.26 ohm at 3.0 V, and 0.45 ohm at 1.8 V. According to the Renesas manufacturer information, ON-resistance matching between channels is 0.04 ohm and flatness across the signal range is 0.05 ohm, making supply selection important in low-voltage routing circuits.
Where can I download the ISL8499IVZ datasheet PDF?
The official ISL8499IVZ datasheet and product information can be reached through the Renesas part-details page at https://www.renesas.com/en/products/isl8499/part-details/isl8499ivz. Use the manufacturer document for the authoritative pin-description table, timing characteristics, electrical limits, and recommended operating conditions before finalizing a circuit.
Where can I find the ISL8499IVZ pinout?
The ISL8499IVZ pinout is defined in the pin-description table of the Renesas manufacturer datasheet for the 16-pin TSSOP package. The ISL8499IVZ page at renesas.com links to the detailed part documentation. Assign PCB nets from that table, including control inputs, common terminals, switched terminals, supply, and ground connections.
What can replace the ISL8499IVZ?
The STG3699 and DG2799 are identified as pin-compatible replacements for the ISL8499 in the cross-reference information. Because the ISL8499IVZ uses a 16-pin TSSOP package, verify footprint, control logic, supply range, and ON resistance against the Renesas manufacturer datasheet before approving either part for a new PCB or a production substitution.
Is the STG3699 a drop-in replacement for ISL8499IVZ?
The STG3699 is identified as pin compatible with the ISL8499, making it a candidate drop-in replacement for the 16-pin TSSOP implementation. According to the cross-reference information, it is specifically a replacement option for the ISL8499. Confirm voltage ratings, control thresholds, channel mapping, and electrical timing against the manufacturer documentation before substitution.
Is the DG2799 the same as the ISL8499IVZ?
The DG2799 is listed as a pin-compatible alternative to the ISL8499, but it should not be treated as electrically identical without review. The cross-reference information identifies both STG3699 and DG2799 as drop-in options for the ISL8499. Compare supply range, ON resistance, control logic, and switching timing in the respective manufacturer datasheets.
ISL8499IVZ vs STG3699: which is better for a low-voltage router?
The ISL8499IVZ is preferable when its documented 0.24 ohm ON resistance at 4.3 V, 15 ns turn-on time, and 13 ns turn-off time match the design requirements. The STG3699 becomes attractive when its pin compatibility and electrical limits satisfy the routing system and its supply sourcing is commercially preferable. Both should be assessed at the actual operating supply.
When should I choose ISL8499IVZ over STG3699?
Choose the ISL8499IVZ when the design depends on its documented low-voltage operation and specific dynamic characteristics: 0.24 ohm ON resistance at 4.3 V and 15 ns turn-on time. Choose the STG3699 when its manufacturer documentation confirms equivalent pin behavior and offers a better lifecycle or sourcing position for the specific design, without changing the 16-pin TSSOP layout.
Is ISL8499IVZ suitable for battery-powered equipment?
The ISL8499IVZ is specifically suited to battery-powered equipment because it supports single-supply operation from +1.65 V to +4.5 V and consumes less than 0.2 microwatt. The Renesas product page identifies battery-powered applications as a target. Its 1.8 V-compatible control logic also supports compact low-voltage systems, although ON resistance rises to 0.45 ohm at 1.8 V.
Where can I buy ISL8499IVZ online?
Use the Request a Quote form on this page to request ISL8499IVZ pricing, stock confirmation, minimum order quantity, and lead time. The Renesas manufacturer page states that support is limited to customers that have already adopted the product, so a current commercial review is advisable. The form provides a direct channel for transaction and lifecycle confirmation.
What is the price of ISL8499IVZ?
The current ISL8499IVZ transaction price should be requested through the Request a Quote form on this page. A quote request can confirm the exact 16-pin TSSOP orderable configuration, current inventory, minimum order quantity, and expected lead time. This avoids treating a historical or family-level price as a current offer for ISL8499IVZ.
What is the lead time and stock status for ISL8499IVZ?
Current ISL8499IVZ stock and lead time should be confirmed through the Request a Quote form on this page. The Renesas manufacturer page states that support is limited to customers that have already adopted the product, indicating constrained support. Quote confirmation should establish the present lead time, minimum order quantity, and status of the requested 16-pin TSSOP configuration.

Données de référence d'ingénierie pour ISL8499IVZ — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the ISL8499IVZ when a compact 16-pin TSSOP quad SPDT switch is needed for a +1.65 V to +4.5 V system and its documented resistance, timing, matching, and flatness figures meet the signal budget. The four bidirectional circuits and 15 ns turn-on time are particularly useful in portable audio, sensor, communication, and measurement-routing designs. Select ISL8499IV when the same core electrical characteristics and footprint are required with a different ordering configuration. Consider STG3699 or DG2799 when their manufacturer documentation confirms the required control levels, supply range, resistance, and timing and their commercial position is preferable for the design. Because the target’s ON resistance rises from 0.24 ohm at 4.3 V to 0.45 ohm at 1.8 V, verify performance at the actual supply before approving any substitute.

Comparaison avec les alternatives

Paramètre Ce produit ISL8499IV STG3699 DG2799
Brand Renesas Electronics Renesas Electronics STMicroelectronics STMicroelectronics
Package 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP
Switch Configuration Quad SPDT (dual DPDT) Quad SPDT (dual DPDT) Quad SPDT replacement Quad SPDT replacement

Principaux différenciateurs

  • Documented low resistance across common low-voltage operating points (vs STG3699)
  • Fast bidirectional switching in four SPDT circuits (vs DG2799)
  • Matched and flat channel characteristics (vs ISL8499IV)

Notes de conception

Account for supply-dependent insertion loss when routing low-amplitude signals. The manufacturer specifies 0.24 ohm ON resistance at 4.3 V, 0.26 ohm at 3.0 V, and 0.45 ohm at 1.8 V. Use the actual supply tolerance in the worst-case signal budget, particularly when operating near the +1.65 V lower limit. For precision paths, also consider the stated 0.04 ohm channel matching and 0.05 ohm flatness across the signal range.

Place the 16-pin TSSOP device near the signals being routed to minimize trace length, especially when switch transitions occur in instrumentation or communication paths. Route each common and switched terminal directly to its intended circuit, avoid sharing narrow segments between channels, and keep the supply and ground connections short. Review the manufacturer pin-description table to preserve the correct numbering and channel orientation of the exposed TSSOP footprint.

Do not treat a pin-compatible cross-reference as proof that every electrical parameter is identical. Before substituting STG3699 or DG2799 for ISL8499IVZ, confirm supply range, control thresholds, ON resistance, switching times, and channel mapping in each manufacturer's datasheet. The low-voltage operating range and 1.8 V-compatible logic are especially important because the target's ON resistance changes substantially between 1.8 V and 4.3 V.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The manufacturer page states that support is limited to customers that have already adopted the product. No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements were identified for this MPN.

Données vérifiées le : 2026-11-10 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

ISL8499IVZ datasheet ISL8499IVZ datasheet pdf ISL8499IVZ pinout Renesas ISL8499IVZ ISL8499IVZ 1.65V 4.5V ISL8499IVZ 0.24 ohm ISL8499IVZ TSSOP-16 ISL8499IVZ equivalent ISL8499IVZ replacement ISL8499IVZ vs STG3699 ISL8499IVZ battery powered switch ISL8499IVZ price ISL8499IVZ stock ISL8499IVZ footprint ISL8499 quad SPDT switch

Composants & termes associés

Renesas Electronics ISL8499IVZ ISL8499IV STG3699 DG2799 analog switch analog multiplexer quad SPDT dual DPDT bidirectional switch interface IC semiconductor ON resistance insertion loss turn-on time turn-off time channel matching 16-pin TSSOP TSSOP package family surface-mount package single-supply operation battery-powered equipment portable audio routing precision test and measurement 1.8 V logic compatibility
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ