ISL8499IVZ - Quad SPDT Low-RON Switch | Renesas Electronics
MPN: ISL8499IVZ ✗ Tapus ng BuhayISL8499IVZ Ulas
An analog switch is a semiconductor device that routes electrical signals between circuit nodes under digital control. The ISL8499 belongs to the analog switch and multiplexer hierarchy within interface integrated circuits. Its low-voltage, low-resistance design is intended to minimize signal loss when connecting battery-powered sensors, audio paths, test equipment, or portable measurement systems. Four independently controlled SPDT poles provide flexible routing in compact systems.
Key features include an ON resistance of 0.26 ohm at 3.0 V and 0.45 ohm at 1.8 V. Typical switching times are 15 ns for turn-on and 13 ns for turn-off. The manufacturer identifies 1.8 V logic compatibility for single-supply operation, while channel-to-channel ON-resistance matching is 0.04 ohm and ON-resistance flatness across the signal range is 0.05 ohm.
The device uses a compact analog-switch architecture to provide low resistance with fast transitions. Each SPDT circuit can connect one common terminal to one of two selectable terminals, allowing the four circuits to implement paired signal routing, source selection, or dual-DPDT switching. The manufacturer highlights low power consumption below 0.2 microwatt and suitability for battery-powered equipment where every switching action must avoid unnecessary signal degradation.
Typical applications include portable audio routing, battery-operated sensor interfaces, precision test and measurement systems, handheld instrumentation, and low-voltage communication equipment. The combination of a 1.65 V minimum supply, 1.8 V-compatible control inputs, sub-20 ns switching timing, and low channel matching supports systems that route small-amplitude signals while operating from limited power budgets.
A key design consideration is the relationship between supply voltage and ON resistance. Resistance rises from 0.24 ohm at 4.3 V to 0.45 ohm at 1.8 V, so designs operating close to the minimum supply should be reviewed for insertion loss. Control-signal levels, unused pins, and switch-state transitions must also be checked against the manufacturer pin-description and timing information before layout release.
This page combines manufacturer specifications, verified same-footprint cross-references, practical routing guidance, and application-focused design considerations. It supports faster part evaluation by presenting electrical behavior, replacement constraints, and layout implications together rather than reproducing basic catalog information alone.
Mga alternatibo na pwedeng ilagay na ISL8499IVZ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok ISL8499IVZ (parehas na form factor at footprint) — pagkakaiba sa Number of Circuits, Package, Power Consumption, Switch Configuration.
ISL8499IV
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →STG3699
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
DG2799
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
ISL8499IVZ Mga Pinakamataas na Rating at Electrical Characteristics
| Number of Circuits | 4 circuits |
| Switch Configuration | Quad SPDT (dual DPDT) |
| Multiplexer Configuration | 2:1 |
| Supply Voltage Range | +1.65 V to +4.5 V |
| Typical ON Resistance at 4.3 V | 0.24 ohm |
| Typical ON Resistance at 3.0 V | 0.26 ohm |
| Typical ON Resistance at 1.8 V | 0.45 ohm |
| Turn-On Time | 15 ns |
| Turn-Off Time | 13 ns |
| ON-Resistance Matching Between Channels | 0.04 ohm |
| ON-Resistance Flatness Across Signal Range | 0.05 ohm |
| Power Consumption | <0.2 microwatt |
| Control Logic Compatibility | 1.8 V logic-compatible with single-supply operation |
| Signal Direction | Bidirectional |
| Packhaging | 16-pin TSSOP |
| Uri ng Pagpapasok | Surface mount |
Gabay sa Pin Configuration ng ISL8499IVZ 16-pin tssop
Pin configuration para sa ISL8499IVZ (16-pin tssop package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa ISL8499IVZ.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
ISL8499IVZ ay nararapat para sa 6 aplikasyons: Portable Audio Signal Routing, Battery-Powered Sensor Interface, Precision Test and Measurement, Handheld Instrumentation, Low-Voltage Communication Interface, Automatic Test Equipment Routing.
Portable Audio Signal Routing
The ISL8499IVZ is appropriate for portable audio routing because each SPDT circuit can connect a common signal terminal to one of two selectable paths. Its 0.24 ohm typical ON resistance at a 4.3 V supply helps limit insertion loss, while 15 ns turn-on and 13 ns turn-off times support rapid source changes. The 1.65 V to 4.5 V operating range and 1.8 V-compatible control logic fit low-voltage portable equipment. At 1.8 V, however, ON resistance increases to 0.45 ohm, so system-level signal-loss budgeting should reflect the actual supply voltage.
Inirekomenda
Battery-Powered Sensor Interface
The ISL8499IVZ can route sensor signals in battery-powered interfaces where supply current and switching time are important constraints. Its power consumption is specified below 0.2 microwatt, and the 1.65 V to 4.5 V single-supply range supports operation near common low-voltage battery rails. Four bidirectional SPDT circuits provide flexible multiplexing without adding another signal-conversion stage. The principal tradeoff is supply-dependent resistance: typical ON resistance increases from 0.24 ohm at 4.3 V to 0.45 ohm at 1.8 V, which can matter for high-impedance or precision sensor networks.
Inirekomenda
Precision Test and Measurement
The ISL8499IVZ suits compact test and measurement equipment that needs fast, low-resistance signal selection. Turn-on and turn-off times of 15 ns and 13 ns reduce dead time during route changes, while 0.04 ohm ON-resistance matching between channels helps preserve balance across switch paths. The 0.05 ohm flatness specification across the signal range also supports predictable behavior in instrumentation. Because a 16-pin TSSOP package keeps the routing network compact, the device can be placed near connectors and test nodes to reduce sensitive trace lengths and improve routing flexibility.
Inirekomenda
Handheld Instrumentation
The ISL8499IVZ fits handheld instruments that combine multiple analog paths with limited board area and power. Four independently controlled analog switches occupy one 16-pin TSSOP package, while the sub-20 ns transition timing supports quick path selection. Its bidirectional configuration allows either signal direction through each SPDT circuit, simplifying multiplexed input and output arrangements. Low power consumption below 0.2 microwatt helps preserve battery life, although engineers should calculate insertion loss at the minimum operating supply because ON resistance reaches 0.45 ohm at 1.8 V.
Inirekomenda
Low-Voltage Communication Interface
The ISL8499IVZ can support signal steering in low-voltage communication equipment that uses analog paths around digital control logic. Fast 15 ns turn-on and 13 ns turn-off timing suit controlled routing, and the bidirectional switches allow flexible connection of transmit, receive, test, or bypass paths. A +1.65 V to +4.5 V supply range covers compact mixed-signal systems, while 1.8 V-compatible control inputs ease integration. For low-amplitude links, validate insertion loss at the operating supply and confirm channel timing against the manufacturer data before releasing the layout.
Inirekomenda
Automatic Test Equipment Routing
The ISL8499IVZ is suitable for automatic test equipment requiring four compact SPDT routing functions with consistent channel behavior. The 0.04 ohm ON-resistance matching figure supports balanced measurements across channels, while 0.05 ohm flatness across the signal range helps simplify system-level error budgets. With 15 ns turn-on and 13 ns turn-off times, the device supports short switching intervals in production test sequences. Place the TSSOP package close to the tested node to limit trace effects, and verify that the selected replacement or original device supports the fixture's required logic levels and operating supply.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for ISL8499IVZ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | ISL8499IV | STG3699 | DG2799 |
|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | STMicroelectronics | STMicroelectronics |
| Package | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP |
| Switch Configuration | Quad SPDT (dual DPDT) | Quad SPDT (dual DPDT) | Quad SPDT replacement | Quad SPDT replacement |
Pangunahing mga Pagkakaiba
- Documented low resistance across common low-voltage operating points (kumpara saSTG3699)
- Fast bidirectional switching in four SPDT circuits (kumpara saDG2799)
- Matched and flat channel characteristics (kumpara saISL8499IV)
Talaan ng Disenyo
Account for supply-dependent insertion loss when routing low-amplitude signals. The manufacturer specifies 0.24 ohm ON resistance at 4.3 V, 0.26 ohm at 3.0 V, and 0.45 ohm at 1.8 V. Use the actual supply tolerance in the worst-case signal budget, particularly when operating near the +1.65 V lower limit. For precision paths, also consider the stated 0.04 ohm channel matching and 0.05 ohm flatness across the signal range.
Place the 16-pin TSSOP device near the signals being routed to minimize trace length, especially when switch transitions occur in instrumentation or communication paths. Route each common and switched terminal directly to its intended circuit, avoid sharing narrow segments between channels, and keep the supply and ground connections short. Review the manufacturer pin-description table to preserve the correct numbering and channel orientation of the exposed TSSOP footprint.
Do not treat a pin-compatible cross-reference as proof that every electrical parameter is identical. Before substituting STG3699 or DG2799 for ISL8499IVZ, confirm supply range, control thresholds, ON resistance, switching times, and channel mapping in each manufacturer's datasheet. The low-voltage operating range and 1.8 V-compatible logic are especially important because the target's ON resistance changes substantially between 1.8 V and 4.3 V.
Impormasyon ng Pagsunod sa Kautusan
The manufacturer page states that support is limited to customers that have already adopted the product. No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements were identified for this MPN.