KSZ8051RNL-TR - 10/100 Ethernet PHY | Microchip Technology
Référence : KSZ8051RNL-TR ✓ ActifKSZ8051RNL-TR Présentation
An Ethernet physical-layer transceiver, or Ethernet PHY, converts digital MAC-layer data into signals suitable for twisted-pair cabling and recovers those signals at the receiving endpoint. In the signal-chain hierarchy, the KSZ8051 sits between an Ethernet MAC controller and a network transformer or integrated magnetic device. It implements the physical signaling required by IEEE 802.3 networks while leaving frame processing and higher-layer protocol work to the MAC.
Key features include support for both 10BASE-T and 100BASE-TX links, full RMII operation, MDC/MDIO management access, and back-to-back mode for copper repeater or media-converter designs. The integrated PHY reduces external circuitry and simplifies board layout. Its single-supply architecture also simplifies power planning compared with multi-rail Ethernet transceiver designs.
The KSZ8051RNL includes the transmit and receive functions required for copper Ethernet. According to the manufacturer datasheet, the 10BASE-T drivers use wave shaping and pre-emphasis, with a typical 10BASE-T output amplitude of 2.5 V peak. In RMII mode, the PHY can present a 50 MHz reference to the MAC or accept a 50 MHz reference from the system, supporting common embedded and automotive Ethernet architectures.
Typical uses include automotive Ethernet nodes, industrial controllers, network interface controllers, media converters, and 100 Mbps copper repeaters. Back-to-back operation allows two KSZ8051RNL devices to form a copper repeater, while an RMII-compatible KSZ8041 can support a media-converter arrangement. These use cases benefit from the combination of IEEE 802.3 signaling, AEC-Q100 qualification, MDC/MDIO management, and compact 32-QFN packaging.
PCB design should preserve the differential signal integrity of each Ethernet pair, provide the required magnetic-device interface, and follow the manufacturer's reference schematic for decoupling and exposed-pad connections. Power routing must accommodate the transceiver's operating supply range, and clock and RMII traces should be laid out to minimize timing disturbance and edge-rate crosstalk.
This page consolidates the KSZ8051RNL-TR functional characteristics, same-footprint family variants, application guidance, and practical design considerations into a concise engineering reference for Ethernet PHY selection and PCB implementation.
Alternatives de remplacement direct pour KSZ8051RNL-TR — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec KSZ8051RNL-TR (même facteur de forme et même empreinte) — différant par Automotive Qualification, Device Type, Management Interface, Package.
KSZ8051RNLI-TR
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
KSZ8051RNLV-TR
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
KSZ8051RNL-TR Spécifications
| Device Type | 1/1 Ethernet transceiver |
| Supported Ethernet Rates | 10BASE-T and 100BASE-TX, up to 100 Mbps |
| Interface | RMII v1.2 |
| Supply Type | Single supply |
| Operating Voltage | 3.135 V to 3.465 V |
| Reference Clock Frequency | 50 MHz |
| Reference Clock Output | 50 MHz output to MAC or external 50 MHz input option |
| Management Interface | MDC/MDIO |
| Ethernet Compliance | IEEE 802.3 |
| Automotive Qualification | AEC-Q100 qualified |
| Boîtier | 32-QFN, 5 x 5 mm |
| Nombre de broches | 32 pins |
| Type de montage | Surface mount |
| 10BASE-T Output Amplitude | 2.5 V peak typical |
| Back-to-Back Mode | Supported for 100 Mbps copper repeater and media-converter designs |
Guide de configuration des broches du KSZ8051RNL-TR 32-qfn, 5 x 5 mm
Configuration des broches du KSZ8051RNL-TR (boîtier 32-qfn, 5 x 5 mm). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour KSZ8051RNL-TR.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
KSZ8051RNL-TR convient pour 6 applications: Automotive Ethernet Nodes, Industrial Controller Ethernet Port, 100 Mbps Copper Repeater, Ethernet Media Converter, Network Interface Controller, Automotive Infotainment Connectivity.
Automotive Ethernet Nodes
The KSZ8051RNL-TR fits automotive Ethernet nodes that require 10BASE-T or 100BASE-TX connectivity with an RMII-based MAC. Its AEC-Q100 qualification, 3.135 V to 3.465 V single-supply operation, and 50 MHz reference-clock output or input option support compact controller designs. The PHY handles physical-layer transmission and reception while the MAC manages frames. In a vehicle network, use the manufacturer reference schematic and validate magnetics, isolation, EMC behavior, and cable routing as part of the complete automotive design.
Recommandé
Industrial Controller Ethernet Port
The KSZ8051RNL-TR is appropriate for industrial controllers that need a compact 100 Mbps Ethernet interface without a separate MII implementation. RMII v1.2 provides a defined parallel connection to the MAC, while MDC/MDIO supports PHY status and configuration. The 32-QFN 5 x 5 mm package saves board area compared with larger leaded alternatives. Designers should provide a stable 3.3 V supply, route Ethernet differential pairs as controlled-impedance nets, and follow the reference magnetic-device implementation.
Recommandé
100 Mbps Copper Repeater
The KSZ8051RNL-TR supports back-to-back operation for a 100 Mbps copper repeater by interfacing two KSZ8051RNL PHYs through RMII. This topology extends copper connectivity while preserving physical-layer signaling in each cable segment. The 50 MHz clock option gives designers flexibility in clock distribution between the PHYs and repeater logic. Back-to-back implementation still requires careful clock timing, power sequencing, termination, transformer selection, and isolation testing under the worst-case traffic conditions.
Recommandé
Ethernet Media Converter
The KSZ8051RNL-TR can serve as the copper Ethernet PHY in a media-converter design where a separate interface controller handles the opposite link medium. Its RMII v1.2 interface and 50 MHz clock output support a conventional MAC connection, while back-to-back mode provides additional topology flexibility. The PHY supports 10BASE-T and 100BASE-TX operation, enabling automatic copper-rate handling through the system. Validate media timing, transformer circuits, loopback behavior, and connector grounding in the final assembly.
Recommandé
Network Interface Controller
The KSZ8051RNL-TR is well suited to a network interface controller that uses an RMII attachment and 10BASE-T/100BASE-TX copper Ethernet. It offloads waveform generation, clock recovery, and physical signaling from the MAC while providing MDC/MDIO access for link management. The 32-QFN package supports compact embedded hardware, and the 3.3 V supply range aligns with common controller platforms. The design must include the required magnetic interface and should keep high-speed RMII and clock traces short and away from switching nodes.
Recommandé
Automotive Infotainment Connectivity
The KSZ8051RNL-TR can support low-bandwidth connectivity in an automotive infotainment or body-control subsystem requiring 10BASE-T or 100BASE-TX over copper. AEC-Q100 qualification supports automotive design planning, while RMII and MDC/MDIO simplify connection to an automotive Ethernet-capable controller. The single 3.3 V supply architecture reduces power-system complexity. Automotive implementation still requires system-level EMC validation, fault monitoring, robust magnetic-device choice, and separation from high-current and high-switching circuits.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour KSZ8051RNL-TR — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | KSZ8051RNLI-TR | KSZ8051RNLV-TR |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 32-QFN (5x5) | 32-QFN (5x5) | 32-QFN (5x5) |
| Ethernet Rate | 10BASE-T/100BASE-TX, up to 100 Mbps | 10BASE-T/100BASE-TX, up to 100 Mbps | 10BASE-T/100BASE-TX, up to 100 Mbps |
| MAC Interface | RMII v1.2 | RMII v1.2 | RMII v1.2 |
| Supply Voltage | 3.135 V to 3.465 V | 3.135 V to 3.465 V | 3.135 V to 3.465 V |
| Reference Clock | 50 MHz output to MAC or external 50 MHz input | 50 MHz output to MAC or external 50 MHz input | 50 MHz output to MAC or external 50 MHz input |
| Management Interface | MDC/MDIO | MDC/MDIO | MDC/MDIO |
| Automotive Qualification | AEC-Q100 qualified | AEC-Q100 qualified | AEC-Q100 qualified |
| Back-to-Back Mode | Supported | Supported | Supported |
| Ordering Suffix | RNL-TR | RNLI-TR temperature-grade variant | RNLV-TR temperature-grade variant |
Principaux différenciateurs
- Integrated RMII clocking flexibility (vs KSZ8051RNLI-TR)
- Automotive-qualified 10/100 Ethernet PHY (vs KSZ8051RNLV-TR)
- Purpose-built back-to-back copper support (vs KSZ8041RNL-TR)
Notes de conception
Route each Ethernet differential pair as a controlled-impedance transmission line and keep the PHY, magnetic device, and connector in the same signal path region. Avoid placing the pairs beside switching power nodes, oscillators, or high-current relay traces. Follow the manufacturer reference schematic and differential-pair geometry recommendations, including symmetrical vias and continuous reference planes.
Provide a stable 3.3 V supply within the 3.135 V to 3.465 V device range and place local decoupling capacitance at the supply pins. Keep supply and ground planes continuous under the QFN while observing the manufacturer's exposed-pad connection requirements. Account for transient current from the Ethernet drivers when sizing the local supply network and bulk capacitance.
Treat the RMII clock and data paths as a coordinated timing interface because RMII v1.2 uses a 50 MHz reference. Route clock and data consistently, minimize stubs, and provide a continuous return path beneath every high-speed trace. Validate setup and hold timing at the MAC across temperature, supply, and process corners rather than relying only on nominal timing.
Do not assume that a same-package Ethernet PHY is automatically pin-compatible. The manufacturer migration material identifies hardware pin differences between KSZ8051 and KSZ8081/KSZ8081 family devices. For any proposed substitution, compare the complete pin table, RMII clock direction, strap settings, MDC/MDIO behavior, supply sequencing, exposed pad, and Ethernet magnetic-device requirements before releasing the PCB.
Informations de conformité
Microchip identifies the KSZ8051 as AEC-Q100 qualified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established for this exact ordering code.