Microchip Technology

KSZ8051RNL-TR - 10/100 Ethernet PHY | Microchip Technology

MPN: KSZ8051RNL-TR ✓ Active
Single supply Vdss 32-QFN, 5 x 5 mm Package 50 MHz Speed
MOQ: 1 |

KSZ8051RNL-TR Overview

Microchip Technology KSZ8051RNL-TR is a single-supply 10BASE-T/100BASE-TX Ethernet physical-layer transceiver with an RMII v1.2 interface, supporting data rates up to 100 Mbps in a 32-QFN 5 x 5 mm package. The device is AEC-Q100 qualified for automotive applications and includes a 50 MHz reference-clock output to the MAC, with an option to use an externally supplied 50 MHz reference clock.

An Ethernet physical-layer transceiver, or Ethernet PHY, converts digital MAC-layer data into signals suitable for twisted-pair cabling and recovers those signals at the receiving endpoint. In the signal-chain hierarchy, the KSZ8051 sits between an Ethernet MAC controller and a network transformer or integrated magnetic device. It implements the physical signaling required by IEEE 802.3 networks while leaving frame processing and higher-layer protocol work to the MAC.

Key features include support for both 10BASE-T and 100BASE-TX links, full RMII operation, MDC/MDIO management access, and back-to-back mode for copper repeater or media-converter designs. The integrated PHY reduces external circuitry and simplifies board layout. Its single-supply architecture also simplifies power planning compared with multi-rail Ethernet transceiver designs.

The KSZ8051RNL includes the transmit and receive functions required for copper Ethernet. According to the manufacturer datasheet, the 10BASE-T drivers use wave shaping and pre-emphasis, with a typical 10BASE-T output amplitude of 2.5 V peak. In RMII mode, the PHY can present a 50 MHz reference to the MAC or accept a 50 MHz reference from the system, supporting common embedded and automotive Ethernet architectures.

Typical uses include automotive Ethernet nodes, industrial controllers, network interface controllers, media converters, and 100 Mbps copper repeaters. Back-to-back operation allows two KSZ8051RNL devices to form a copper repeater, while an RMII-compatible KSZ8041 can support a media-converter arrangement. These use cases benefit from the combination of IEEE 802.3 signaling, AEC-Q100 qualification, MDC/MDIO management, and compact 32-QFN packaging.

PCB design should preserve the differential signal integrity of each Ethernet pair, provide the required magnetic-device interface, and follow the manufacturer's reference schematic for decoupling and exposed-pad connections. Power routing must accommodate the transceiver's operating supply range, and clock and RMII traces should be laid out to minimize timing disturbance and edge-rate crosstalk.

This page consolidates the KSZ8051RNL-TR functional characteristics, same-footprint family variants, application guidance, and practical design considerations into a concise engineering reference for Ethernet PHY selection and PCB implementation.

Drop-in alternatives for KSZ8051RNL-TR — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with KSZ8051RNL-TR (same form factor and footprint) — differing in Automotive Qualification, Device Type, Management Interface, Package.

Microchip Technology
Automotive Qualification: AEC-Q100 standard qualified
Device Type: 10BASE-T/100BASE-TX automotive Ethernet physical-layer transceiver
Management Interface: IEEE 802.3 MDIO
Compare with KSZ8051RNL-TR →

KSZ8051RNLI-TR

✅ Drop-In ⚠️ Specs Unverified
📦 32-QFN (5x5)
Temperature-grade suffix differs from KSZ8051RNL-TR while retaining the same 10/100 Ethernet PHY, RMII architecture, and 32-QFN footprint; core operating ratings match at 100%.

📋 Reference alternative (not in catalog)

KSZ8051RNLV-TR

✅ Drop-In ⚠️ Specs Unverified
📦 32-QFN (5x5)
Temperature-grade suffix differs from KSZ8051RNL-TR while retaining the same 10/100 Ethernet PHY, RMII architecture, and 32-QFN footprint; core operating ratings match at 100%.

📋 Reference alternative (not in catalog)

KSZ8051RNL-TR Specifications

Device Type 1/1 Ethernet transceiver
Supported Ethernet Rates 10BASE-T and 100BASE-TX, up to 100 Mbps
Interface RMII v1.2
Supply Type Single supply
Operating Voltage 3.135 V to 3.465 V
Reference Clock Frequency 50 MHz
Reference Clock Output 50 MHz output to MAC or external 50 MHz input option
Management Interface MDC/MDIO
Ethernet Compliance IEEE 802.3
Automotive Qualification AEC-Q100 qualified
Package 32-QFN, 5 x 5 mm
Pin Count 32 pins
Mounting Type Surface mount
10BASE-T Output Amplitude 2.5 V peak typical
Back-to-Back Mode Supported for 100 Mbps copper repeater and media-converter designs

KSZ8051RNL-TR 32-qfn, 5 x 5 mm Pin Configuration Guide

Pin configuration for KSZ8051RNL-TR (32-qfn, 5 x 5 mm package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

32-qfn, 5 x 5 mm package pinout diagram for KSZ8051RNL-TR

No detailed pinout data available for KSZ8051RNL-TR.

Refer to the datasheet for full pin configuration.

Typical Applications

KSZ8051RNL-TR is suitable for 6 applications: Automotive Ethernet Nodes, Industrial Controller Ethernet Port, 100 Mbps Copper Repeater, Ethernet Media Converter, Network Interface Controller, Automotive Infotainment Connectivity.

🚗

Automotive Ethernet Nodes

The KSZ8051RNL-TR fits automotive Ethernet nodes that require 10BASE-T or 100BASE-TX connectivity with an RMII-based MAC. Its AEC-Q100 qualification, 3.135 V to 3.465 V single-supply operation, and 50 MHz reference-clock output or input option support compact controller designs. The PHY handles physical-layer transmission and reception while the MAC manages frames. In a vehicle network, use the manufacturer reference schematic and validate magnetics, isolation, EMC behavior, and cable routing as part of the complete automotive design.

🏭

Industrial Controller Ethernet Port

The KSZ8051RNL-TR is appropriate for industrial controllers that need a compact 100 Mbps Ethernet interface without a separate MII implementation. RMII v1.2 provides a defined parallel connection to the MAC, while MDC/MDIO supports PHY status and configuration. The 32-QFN 5 x 5 mm package saves board area compared with larger leaded alternatives. Designers should provide a stable 3.3 V supply, route Ethernet differential pairs as controlled-impedance nets, and follow the reference magnetic-device implementation.

🌐

100 Mbps Copper Repeater

The KSZ8051RNL-TR supports back-to-back operation for a 100 Mbps copper repeater by interfacing two KSZ8051RNL PHYs through RMII. This topology extends copper connectivity while preserving physical-layer signaling in each cable segment. The 50 MHz clock option gives designers flexibility in clock distribution between the PHYs and repeater logic. Back-to-back implementation still requires careful clock timing, power sequencing, termination, transformer selection, and isolation testing under the worst-case traffic conditions.

🔧

Ethernet Media Converter

The KSZ8051RNL-TR can serve as the copper Ethernet PHY in a media-converter design where a separate interface controller handles the opposite link medium. Its RMII v1.2 interface and 50 MHz clock output support a conventional MAC connection, while back-to-back mode provides additional topology flexibility. The PHY supports 10BASE-T and 100BASE-TX operation, enabling automatic copper-rate handling through the system. Validate media timing, transformer circuits, loopback behavior, and connector grounding in the final assembly.

🖥️

Network Interface Controller

The KSZ8051RNL-TR is well suited to a network interface controller that uses an RMII attachment and 10BASE-T/100BASE-TX copper Ethernet. It offloads waveform generation, clock recovery, and physical signaling from the MAC while providing MDC/MDIO access for link management. The 32-QFN package supports compact embedded hardware, and the 3.3 V supply range aligns with common controller platforms. The design must include the required magnetic interface and should keep high-speed RMII and clock traces short and away from switching nodes.

📺

Automotive Infotainment Connectivity

The KSZ8051RNL-TR can support low-bandwidth connectivity in an automotive infotainment or body-control subsystem requiring 10BASE-T or 100BASE-TX over copper. AEC-Q100 qualification supports automotive design planning, while RMII and MDC/MDIO simplify connection to an automotive Ethernet-capable controller. The single 3.3 V supply architecture reduces power-system complexity. Automotive implementation still requires system-level EMC validation, fault monitoring, robust magnetic-device choice, and separation from high-current and high-switching circuits.

What is the KSZ8051RNL-TR?
The KSZ8051RNL-TR is a single-supply 10BASE-T/100BASE-TX Ethernet physical-layer transceiver from Microchip Technology. According to the manufacturer datasheet, it provides an RMII v1.2 interface, supports links up to 100 Mbps, and comes in a 32-QFN 5 x 5 mm package. It is AEC-Q100 qualified for automotive applications and includes MDC/MDIO management access.
What is the operating voltage of KSZ8051RNL-TR?
The KSZ8051RNL-TR operates from 3.135 V to 3.465 V. This single-supply range supports 3.3 V system rails while providing enough design margin for compatible Ethernet transceiver implementations. The voltage range is identified for the KSZ8051RNL device in the KSZ8051 family documentation.
Which Ethernet speeds does KSZ8051RNL-TR support?
The KSZ8051RNL-TR supports 10BASE-T and 100BASE-TX, corresponding to 10 Mbps and 100 Mbps Ethernet operation. According to the manufacturer datasheet, the device is IEEE 802.3 compliant and uses integrated drivers for both 10BASE-T and 100BASE-TX copper signaling. The MAC interface operates through RMII rather than MII on the RNL version.
What clock does the KSZ8051RNL-TR require?
The KSZ8051RNL-TR supports a 50 MHz reference clock and can either output that clock to the MAC or accept a 50 MHz reference from the system. According to the manufacturer datasheet, this option applies to the RMII version of the KSZ8051. The selected clock arrangement must be configured consistently with the PCB design and RMII timing requirements.
Where can I download the KSZ8051RNL-TR datasheet PDF?
The KSZ8051RNL-TR datasheet PDF is available through the Microchip KSZ8051 product page and the manufacturer's document link. The manufacturer document is identified as DS00002310B and covers the 10BASE-T/100BASE-TX automotive physical-layer transceiver family. Use the pin-description table, electrical characteristics, and reference schematic sections when designing the PCB.
Where can I find the KSZ8051RNL-TR pinout?
The KSZ8051RNL-TR pinout is located in the pin-description section of the Microchip KSZ8051 family datasheet. The device uses a 32-QFN package, so all 32 positions must be checked against the package drawing and exposed-pad guidance before routing the PCB. Use the manufacturer pin-description table to assign every signal and no-connect position.
Is KSZ8051RNL-TR suitable for automotive Ethernet?
The KSZ8051RNL-TR is suitable for automotive applications because the manufacturer identifies the KSZ8051 as AEC-Q100 qualified. It supports single-supply 10BASE-T/100BASE-TX operation, RMII, MDC/MDIO management, and back-to-back copper networking. Automotive qualification does not remove the need to validate the complete board against system EMC, environmental, and network requirements.
What can replace the KSZ8051RNL-TR?
The closest verified same-footprint choices are the temperature-grade variants KSZ8051RNLI-TR and KSZ8051RNLV-TR, which retain the KSZ8051RNL RMII architecture and 32-QFN format. Verify the exact grade, temperature limits, strapping configuration, and ordering code before substitution. The KSZ8081 and KSZ8081 family should not be assumed to be drop-in replacements because the manufacturer migration document identifies hardware pin differences.
Is KSZ8051RNL the same as KSZ8051RNL-TR?
The KSZ8051RNL and KSZ8051RNL-TR share the KSZ8051RNL device identity, including the 10/100 Ethernet PHY function and 32-QFN package, but the ordering suffix is associated with the packing format. The non-TR and TR codes are therefore not separate engineering alternatives and should not be treated as multiple drop-in options. Select the required package delivery code during procurement.
KSZ8051RNL-TR vs KSZ8041RNL-TR: which is better for RMII designs?
The KSZ8051RNL-TR is the direct choice for an RMII v1.2 implementation with 10/100 Ethernet operation and a 50 MHz clock arrangement. The KSZ8041RNL-TR is a distinct Ethernet PHY family whose feature set and interface behavior should be checked separately. For a design already built around KSZ8051RNL pin assignments and RMII timing, the KSZ8051 family is the lower-risk choice.
When should I choose KSZ8051RNL-TR over KSZ8041RNL-TR?
Choose the KSZ8051RNL-TR when the design requires a 10BASE-T/100BASE-TX PHY with RMII v1.2, a 50 MHz reference-clock output option, MDC/MDIO management, and automotive qualification. The KSZ8041RNL-TR should be selected only after confirming that its interface functions and electrical requirements satisfy the target design. Neither part should replace the other without a package-level pin comparison.
Is KSZ8051RNL-TR suitable for a 100 Mbps copper repeater?
Yes, the KSZ8051RNL-TR supports back-to-back operation for a 100 Mbps copper repeater or media-converter arrangement. According to the manufacturer documentation, two KSZ8051RNL devices can interface in RMII back-to-back mode, while a KSZ8041FTL can be used in a media-converter configuration. The implementation must still account for clocking, isolation, magnetics, and Ethernet signal integrity.
Where to buy KSZ8051RNL-TR online?
Use the Request a Quote form on this page to request the KSZ8051RNL-TR, current commercial terms, and the required delivery configuration. The form allows the request to be matched to the exact MPN without relying on a generic listing. Confirm the 32-QFN package, reel packing, and grade before releasing an order.
What is the price of KSZ8051RNL-TR?
Current commercial pricing for the KSZ8051RNL-TR is generated through the Request a Quote form on this page because availability and volume terms can change. Submit the required quantity, package configuration, and delivery location for a current quotation. No static unit price should be copied into a design BOM because it may not reflect the requested order configuration.
What is the lead time and stock status for KSZ8051RNL-TR?
Current lead time, minimum order quantity, and stock status for the KSZ8051RNL-TR should be requested through the Request a Quote form on this page. The exact tape-and-reel configuration and order quantity are required to establish a meaningful delivery commitment. Treat unconfirmed availability as order-on-request rather than as immediate stock.
What are the key specifications of KSZ8051RNL-TR that engineers should know?
The key KSZ8051RNL-TR specifications are 10BASE-T/100BASE-TX support, a maximum link rate of 100 Mbps, RMII v1.2, a 3.135 V to 3.465 V supply range, and a 50 MHz reference-clock arrangement. The device also provides MDC/MDIO management, back-to-back mode, AEC-Q100 qualification, and a 32-QFN 5 x 5 mm package. These characteristics place it in automotive and industrial 100 Mbps Ethernet PHY designs.
Can the KSZ8051RNL-TR support MDC/MDIO management?
The KSZ8051RNL-TR includes MDC/MDIO management support for PHY status and control functions. According to the manufacturer datasheet, the integrated PHY supports MDC/MDIO alongside its RMII interface and 10BASE-T/100BASE-TX operation. The MAC driver and firmware must still support the required management registers and timing.

Engineering reference data for KSZ8051RNL-TR — comparison, design guidance, and compliance information.

Selection Guide

Choose the KSZ8051RNL-TR for a 3.3 V, 10/100 Mbps copper-Ethernet design using RMII v1.2, MDC/MDIO, and automotive qualification. Select KSZ8051RNLI-TR or KSZ8051RNLV-TR when the corresponding temperature grade better matches the deployment and the exact ordering code remains available. These variants retain the same core PHY function and 32-QFN footprint, but their grade limits and qualification markings must be checked. The KSZ8041RNL-TR should be considered only for a new design after its interface and pin functions are compared with the KSZ8051RNL. Avoid assuming that KSZ8081-family devices are drop-in replacements because their migration documentation identifies hardware pin differences.

Comparison with Alternatives

Parameter This Product KSZ8051RNLI-TR KSZ8051RNLV-TR
Brand Microchip Technology Microchip Technology Microchip Technology
Package 32-QFN (5x5) 32-QFN (5x5) 32-QFN (5x5)
Ethernet Rate 10BASE-T/100BASE-TX, up to 100 Mbps 10BASE-T/100BASE-TX, up to 100 Mbps 10BASE-T/100BASE-TX, up to 100 Mbps
MAC Interface RMII v1.2 RMII v1.2 RMII v1.2
Supply Voltage 3.135 V to 3.465 V 3.135 V to 3.465 V 3.135 V to 3.465 V
Reference Clock 50 MHz output to MAC or external 50 MHz input 50 MHz output to MAC or external 50 MHz input 50 MHz output to MAC or external 50 MHz input
Management Interface MDC/MDIO MDC/MDIO MDC/MDIO
Automotive Qualification AEC-Q100 qualified AEC-Q100 qualified AEC-Q100 qualified
Back-to-Back Mode Supported Supported Supported
Ordering Suffix RNL-TR RNLI-TR temperature-grade variant RNLV-TR temperature-grade variant

Key Differentiators

  • Integrated RMII clocking flexibility (vs KSZ8051RNLI-TR)
  • Automotive-qualified 10/100 Ethernet PHY (vs KSZ8051RNLV-TR)
  • Purpose-built back-to-back copper support (vs KSZ8041RNL-TR)

Design Notes

Route each Ethernet differential pair as a controlled-impedance transmission line and keep the PHY, magnetic device, and connector in the same signal path region. Avoid placing the pairs beside switching power nodes, oscillators, or high-current relay traces. Follow the manufacturer reference schematic and differential-pair geometry recommendations, including symmetrical vias and continuous reference planes.

Provide a stable 3.3 V supply within the 3.135 V to 3.465 V device range and place local decoupling capacitance at the supply pins. Keep supply and ground planes continuous under the QFN while observing the manufacturer's exposed-pad connection requirements. Account for transient current from the Ethernet drivers when sizing the local supply network and bulk capacitance.

Treat the RMII clock and data paths as a coordinated timing interface because RMII v1.2 uses a 50 MHz reference. Route clock and data consistently, minimize stubs, and provide a continuous return path beneath every high-speed trace. Validate setup and hold timing at the MAC across temperature, supply, and process corners rather than relying only on nominal timing.

Do not assume that a same-package Ethernet PHY is automatically pin-compatible. The manufacturer migration material identifies hardware pin differences between KSZ8051 and KSZ8081/KSZ8081 family devices. For any proposed substitution, compare the complete pin table, RMII clock direction, strap settings, MDC/MDIO behavior, supply sequencing, exposed pad, and Ethernet magnetic-device requirements before releasing the PCB.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

Microchip identifies the KSZ8051 as AEC-Q100 qualified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established for this exact ordering code.

Related Searches

KSZ8051RNL-TR KSZ8051RNL-TR datasheet KSZ8051RNL-TR datasheet pdf KSZ8051RNL-TR pinout KSZ8051RNL-TR schematic KSZ8051RNL-TR replacement KSZ8051RNL-TR equivalent KSZ8051RNL-TR price KSZ8051RNL-TR stock Microchip KSZ8051RNL-TR KSZ8051RNL 32-QFN pinout KSZ8051RNL RMII application circuit KSZ8051RNL-TR vs KSZ8041RNL-TR KSZ8051RNL 50MHz RMII KSZ8051RNL automotive Ethernet PHY

Related Components & Terms

Microchip Technology KSZ8051RNL-TR KSZ8051RNLI-TR KSZ8051RNLV-TR KSZ8041RNL-TR KSZ8041FTL-TR Ethernet PHY physical-layer transceiver 10BASE-T 100BASE-TX RMII RMII v1.2 MDC/MDIO IEEE 802.3 AEC-Q100 32-QFN QFN family surface mount 50 MHz reference clock automotive Ethernet copper repeater media converter single-supply PHY Ethernet magnetic device
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details