Microchip Technology

KSZ8081MNXCA - 10/100 Ethernet PHY | Microchip | QFN-32

Référence : KSZ8081MNXCA ✓ Actif
3.3 V Vdss 32-pin QFN, 5 x 5 mm Package 25 MHz Speed
MOQ : 1 |

KSZ8081MNXCA Présentation

The Microchip Technology KSZ8081MNXCA is a single-channel 10BASE-T/100BASE-TX Ethernet physical-layer transceiver with Full MII interfacing, operating from a single 3.3 V supply in a 32-lead QFN package measuring 5 x 5 mm. The KSZ8081 family provides the physical-layer interface between an Ethernet MAC and twisted-pair cable while supporting both 10 Mbit/s and 100 Mbit/s operation.

An Ethernet PHY is an interface integrated circuit that converts digital MAC signals into electrical signaling suitable for copper cabling and converts received cable signals back into digital data. In the hierarchy, the KSZ8081 is an Ethernet physical-layer transceiver, an interface IC, a network-interface component, and a semiconductor. It sits between a network controller or embedded processor with an MII interface and a CAT-5 unshielded twisted-pair network connection.

The device supports both 10BASE-T and 100BASE-TX data rates on standard CAT-5 UTP cabling. Its Full MII connection provides parallel data and control signaling to the host Ethernet controller, while the integrated PHY reduces the number of external interface components required on a network port. The 32-QFN package includes an exposed pad for improved heat conduction and supports a compact 5 x 5 mm PCB footprint.

The KSZ8081 family is designed for space-constrained Ethernet equipment requiring a conventional copper twisted-pair port. The manufacturer describes the KSZ8081 as a highly integrated PHY that reduces board cost and space, making it appropriate for industrial controllers, embedded systems, access equipment, and compact network interfaces. A 25 MHz crystal can be used to generate the required clocks in applicable family configurations, including the 50 MHz RMII reference output identified for the KSZ8081RNB.

Typical implementations place the PHY close to the RJ45 connector and magnetic network interface, with short differential copper traces routed to maintain Ethernet signal quality. Decoupling should follow the manufacturer's recommended circuit, and the exposed pad requires a properly designed ground and thermal-via arrangement. Component values and layout must be checked against the current manufacturer datasheet before release to production.

The KSZ8081MNXCA is intended for designs using a 3.3 V Ethernet PHY with Full MII host signaling. Engineers should verify the exact MII clocking mode, magnetics selection, cable-length support, and diagnostic behavior against the device configuration required by the target system, particularly when using a different suffix or package option.

This product page combines the principal electrical, package, interface, application, and replacement information needed for initial design selection. It also distinguishes true package-compatible options from related KSZ8081 variants and highlights the checks that should be completed before any PHY replacement is approved for an existing PCB.

Alternatives de remplacement direct pour KSZ8081MNXCA — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec KSZ8081MNXCA (même facteur de forme et même empreinte) — différant par Package.

Microchip Technology
Package: 32-QFN, 5 x 5 mm
Comparer avec KSZ8081MNXCA →

KSZ8081MNXIA-TR

✅ Remplacement direct
Microchip Technology
📦 32-QFN (5 x 5 mm)
10Base-T/100Base-TX Ethernet physical-layer transceiver · 10 Mbps and 100 Mbps · CAT-5 unshielded twisted pair (UTP) · Full MII · 1/1 transceiver · Single supply · 32-QFN, 5 x 5 mm · Surface mount

Contactez-nous pour le prix

Voir la fiche technique →

KSZ8081RNBCA-TR

✅ Remplacement direct
📦 32-QFN (5 x 5 mm)
Same 10/100BASE-TX, 3.3 V class and 32-QFN package family; clocking and suffix-specific characteristics differ, with no verified change to the core data-rate ratings

📋 Alternative de référence (hors catalogue)

KSZ8081RNDCA-TR

✅ Remplacement direct
📦 32-QFN (5 x 5 mm)
Same 10/100BASE-TX and 32-QFN package family; suffix-specific clock, diagnostic, and ordering differences remain, with core data rates unchanged

📋 Alternative de référence (hors catalogue)

KSZ8081MNXCA-TR

✅ Remplacement direct
📦 32-QFN (5 x 5 mm)
Identical core 10/100BASE-TX, 3.3 V, Full MII electrical and package ratings; ordering suffix differs by 0% in the stated key parameters

📋 Alternative de référence (hors catalogue)

KSZ8081MNXCA Spécifications

Product Type 10BASE-T/100BASE-TX Ethernet physical-layer transceiver
Manufacturer Microchip Technology
Supported Data Rates 10 Mbit/s and 100 Mbit/s
PHY Channel Count 1 channel
Host Interface Full MII
Tension d'alimentation 3.3 V
Power Supply Architecture Single supply
Cable Support CAT-5 unshielded twisted pair
Ethernet Standard IEEE 802.3
Boîtier 32-pin QFN, 5 x 5 mm
Exposed Thermal Pad Present
Lead Style No lead
Température de fonctionnement -40 C to +85 C
Temperature Grade Commercial
Packaging Tray
Crystal Reference Frequency 25 MHz
RoHS Compliance unknown
REACH Compliance unknown

Guide de configuration des broches du KSZ8081MNXCA 32-pin qfn, 5 x 5 mm

Configuration des broches du KSZ8081MNXCA (boîtier 32-pin qfn, 5 x 5 mm). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 32-pin qfn, 5 x 5 mm pour le KSZ8081MNXCA

Aucune donnée de brochage détaillée disponible pour KSZ8081MNXCA.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

KSZ8081MNXCA convient pour 6 applications: Embedded Ethernet Control, Industrial Monitoring Equipment, Network Interface Adapter, Instrumentation and Test Equipment, Industrial IoT Gateway, Access and Control Terminals.

🏭

Embedded Ethernet Control

The KSZ8081MNXCA suits embedded controllers that require a compact 10/100 Mbit/s Ethernet port without implementing the physical layer in discrete components. Its single 3.3 V supply and Full MII interface provide a direct digital connection to an Ethernet MAC, while the PHY handles 10BASE-T and 100BASE-TX signaling over CAT-5 UTP. Placing the device near the magnetics and RJ45 connector can reduce board area and routing complexity. The design should follow the manufacturer typical-application circuit for decoupling, clocking, exposed-pad grounding, and magnetic-interface values.

🏭

Industrial Monitoring Equipment

The KSZ8081MNXCA is appropriate for industrial monitoring and control equipment requiring wired Ethernet connectivity in a commercial-grade temperature range of -40 C to +85 C. Its 32-QFN, 5 x 5 mm footprint preserves PCB area in compact instruments, and support for both 10 and 100 Mbit/s allows connection to common legacy and fast Ethernet infrastructure. Designers should verify the enclosure temperature rise, galvanic isolation strategy, magnetics, and grounding because the PHY itself does not provide an isolation barrier.

🌐

Network Interface Adapter

The KSZ8081MNXCA can form the physical-layer portion of a small network interface adapter that connects a host controller through Full MII to a standard copper Ethernet jack. Its integrated 10BASE-T/100BASE-TX PHY reduces the adapter's component count and footprint compared with a discrete transceiver arrangement. The implementation should preserve short differential routes between the PHY, isolation or filtering components, magnetics, and connector, while following the manufacturer layout for the exposed pad and power bypass network.

📱

Instrumentation and Test Equipment

The KSZ8081MNXCA is well suited to data-acquisition and test equipment that must communicate with Ethernet management stations or factory test systems. The Full MII interface permits structured digital connection to a capable MAC or controller, while the PHY handles the physical copper link at 10 or 100 Mbit/s. Designers should use short, controlled-impedance routing and verify the clock configuration for deterministic data transfer. The exposed thermal pad should be tied to the recommended ground plane and furnished with thermal vias to avoid concentrating heat in the 5 x 5 mm package.

🧩

Industrial IoT Gateway

The KSZ8081MNXCA provides a compact wired-network endpoint for industrial IoT gateways that need reliable 10/100BASE-TX connectivity over CAT-5 UTP. Its small QFN footprint supports dense gateway assemblies, and its single 3.3 V supply simplifies power architecture when the surrounding controller also operates at compatible logic levels. The final design must account for the gateway enclosure's thermal environment, Ethernet isolation requirements, cable surge exposure, and production-test access to diagnostic functions described in the manufacturer documentation.

🔒

Access and Control Terminals

The KSZ8081MNXCA can support access terminals, controllers, and remote service equipment that connect to Ethernet-based management networks. Support for 10 Mbit/s remains useful when interoperating with older infrastructure, while 100 Mbit/s handles typical controller traffic. The PHY should be placed adjacent to the magnetic network interface, with the differential route kept short and symmetrical. Before production release, confirm the exact Full MII clocking arrangement, reset behavior, diagnostic pins, and exposed-pad connection against the current Microchip datasheet.

Where to buy KSZ8081MNXCA online?
The KSZ8081MNXCA can be requested through the Request a Quote form on this page. The selected part is a Microchip Technology 10BASE-T/100BASE-TX PHY in a 32-QFN package, so a quotation should specify the exact MPN, quantity, tray quantity, and delivery destination. This avoids mismatches with KSZ8081MNXCA-TR ordering codes or other package and temperature variants.
What is the price of KSZ8081MNXCA?
Use the Request a Quote form on this page for the current commercial price of the KSZ8081MNXCA. The quote request identifies the exact 32-QFN, single-supply, 3.3 V Ethernet PHY and can include the required quantity and partial-tray conditions. Pricing for the un-suffixed MPN should not be inferred from tape-and-reel or temperature-grade variants because their ordering terms can differ.
What is the lead time for KSZ8081MNXCA?
The current lead time should be confirmed with the Request a Quote form on this page. The Microchip direct listing reported an estimated factory lead time of approximately 60 weeks, but current allocation and shipment timing can vary by quantity and order status. Request a written quotation before committing a production schedule or placing a non-cancellable purchase order.
Is KSZ8081MNXCA in stock?
The Microchip direct listing reported 80 units available in partial-tray quantities, while other channels also advertised availability for the KSZ8081 family. Current stock should be confirmed through the Request a Quote form on this page because inventory can change rapidly and a distributor listing does not guarantee the same allocation for every order quantity.
What are the key specifications of KSZ8081MNXCA that engineers should know?
The KSZ8081MNXCA is a single-channel, 3.3 V Ethernet PHY supporting 10 Mbit/s and 100 Mbit/s over CAT-5 UTP with a Full MII host interface. According to the Microchip product description and manufacturer datasheet, it is packaged in a 32-lead QFN measuring 5 x 5 mm with an exposed pad, operates from a single supply, and supports the IEEE 802.3 Ethernet physical layer.
Where can I download the KSZ8081MNXCA datasheet PDF?
The official manufacturer datasheet is available from the Microchip document link on this page. It covers the KSZ8081RNB and related family devices, including the 25 MHz crystal arrangement and a 50 MHz RMII reference-clock output identified for the KSZ8081RNB. Use the manufacturer datasheet together with the ordering-information table to confirm that every pin, clock option, and suffix-specific function applies to the KSZ8081MNXCA.
Where can I find the KSZ8081MNXCA pinout?
The KSZ8081MNXCA pinout is found in the pin-description and package drawings in the official Microchip KSZ8081 datasheet. The device uses a 32-lead QFN with an exposed pad, so PCB designers should follow the manufacturer's land-pattern and exposed-pad guidance rather than relying on a generic 32-QFN footprint. Confirm pin names and exposed-pad connections against the current datasheet before assigning schematic nets.
What can replace KSZ8081MNXCA?
The closest documented alternatives are the Microchip KSZ8081MNXIA-TR, KSZ8081RNBCA-TR, and KSZ8081RNDCA-TR families, all associated with a 32-QFN physical-layer-transceiver implementation. Replacement approval should confirm identical Full MII pinout, 3.3 V supply compatibility, clock configuration, exposed-pad layout, and every suffix-specific function. The available cross-reference information does not establish five fully verified pin-to-pin drop-ins.
Is KSZ8081MNXCA the same as KSZ8081MNXIA-TR?
KSZ8081MNXIA-TR is a related 32-QFN, 3.3 V, 10/100 Ethernet PHY option, but it is not automatically identical to the KSZ8081MNXCA. The comparison data describes consistent terminals and packages, yet engineers should still verify ordering suffix, temperature grade, clocking, diagnostics, and production-code requirements. Confirm those differences against the manufacturer ordering information before treating it as a drop-in replacement.
What is the difference between KSZ8081MNXCA and KSZ8081RNBCA-TR?
Both devices are Microchip 10BASE-T/100BASE-TX PHYs associated with 32-QFN packages, but suffix changes can affect clock architecture, temperature grade, diagnostics, and ordering code. The available comparison identifies a QFN-32 physical-layer transceiver and IEEE 802.3 support for both. A board-level substitution requires comparing the complete pin-description tables and typical-application circuits, not merely the package name.
When should I choose KSZ8081MNXCA over KSZ8081RNBCA-TR?
Choose KSZ8081MNXCA when the existing design specifically calls for its 3.3 V single-supply Full MII configuration and 32-QFN footprint. Consider KSZ8081RNBCA-TR only after verifying that its clocking, pin functions, temperature grade, and exposed-pad connections match the design. The two family options share a general device category, but package similarity alone does not prove interchangeability.
Is KSZ8081MNXCA suitable for industrial equipment?
The KSZ8081MNXCA is rated for commercial-grade operation from -40 C to +85 C and is therefore suitable for many industrial, instrumentation, and embedded-network designs that remain within that temperature range. The commercial-grade marking should be checked against the finished equipment's worst-case ambient temperature, enclosure temperature rise, and any qualification requirements for the complete product.
Does KSZ8081MNXCA require an external 25 MHz crystal?
The manufacturer documentation states that a 25 MHz crystal is used to generate the required clocks in the applicable KSZ8081 implementation, and the document specifically identifies a 50 MHz RMII reference-clock output for the KSZ8081RNB. Because clock connections and configuration differ across KSZ8081 suffixes, engineers should follow the exact KSZ8081MNXCA typical-application and pin-description sections before laying out the oscillator circuit.
How is KSZ8081MNXCA used with an Ethernet MAC?
The KSZ8081MNXCA connects an Ethernet media-access controller to a 10/100BASE-TX copper port through its Full MII interface. The MAC supplies parallel transmit data and control signals, while the PHY performs the physical-layer encoding and cable-side transmission. The system still needs the correct magnetics, RJ45 connection, decoupling, clock source, and layout described by the manufacturer reference design.
What is the best Microchip Technology equivalent for KSZ8081MNXCA?
The best supported starting point is another 3.3 V, 10/100BASE-TX, 32-QFN member of the KSZ8081 family, such as KSZ8081MNXIA-TR, KSZ8081RNBCA-TR, or KSZ8081RNDCA-TR. Choose among them only after a pin-by-pin comparison. No verified cross-brand equivalent with the required same-package, pin-to-pin compatibility was established, so an unrelated Ethernet PHY should not be treated as a drop-in replacement.

Données de référence d'ingénierie pour KSZ8081MNXCA — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the KSZ8081MNXCA for a compact, single-supply 3.3 V Ethernet port that uses a Full MII connection and requires 10BASE-T or 100BASE-TX operation in a 32-QFN footprint. KSZ8081MNXIA-TR is the closest documented related option when its ordering suffix and qualification details match the product program, but the manufacturer ordering table must be checked before substitution. KSZ8081RNBCA-TR and KSZ8081RNDCA-TR remain candidates only after a complete pin, clock, diagnostic, and thermal-layout comparison because suffix-specific functions may differ. KSZ8081MNXCA-TR represents the same core device with an ordering suffix, but the exact purchasing code and packaging terms should be confirmed. No cross-brand drop-in was established with enough pin-level evidence to approve automatically; an unrelated Ethernet PHY generally requires full interface, clocking, layout, and magnetics validation rather than a simple board replacement.

Comparaison avec les alternatives

Paramètre Ce produit KSZ8081MNXIA-TR KSZ8081RNBCA-TR KSZ8081RNDCA-TR KSZ8081MNXCA-TR
Package 32-QFN (5 x 5 mm) 32-QFN (5 x 5 mm) 32-QFN (5 x 5 mm) 32-QFN (5 x 5 mm) 32-QFN (5 x 5 mm)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Product Type 10BASE-T/100BASE-TX physical-layer transceiver 10BASE-T/100BASE-TX physical-layer transceiver 10BASE-T/100BASE-TX physical-layer transceiver 10BASE-T/100BASE-TX physical-layer transceiver 10BASE-T/100BASE-TX physical-layer transceiver
Supported Data Rates 10 Mbit/s and 100 Mbit/s 10 Mbit/s and 100 Mbit/s 10 Mbit/s and 100 Mbit/s 10 Mbit/s and 100 Mbit/s 10 Mbit/s and 100 Mbit/s
Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V
Ethernet Compliance IEEE 802.3 IEEE 802.3 IEEE 802.3 IEEE 802.3 IEEE 802.3

Principaux différenciateurs

  • Direct Full MII integration (vs KSZ8081RNBCA-TR)
  • Single 3.3 V supply architecture (vs KSZ8081MNXIA-TR)
  • Compact 5 x 5 mm footprint (vs KSZ8081RNDCA-TR)
  • Commercial temperature coverage (vs KSZ8081MNXCA-TR)

Notes de conception

Place the KSZ8081MNXCA close to the Ethernet magnetics and RJ45 connector, and keep the 100BASE-TX differential routes short, symmetrical, and free of unnecessary vias. Follow the manufacturer reference layout for component spacing and controlled-impedance geometry. The exposed pad must use the datasheet-recommended ground connection and thermal-via pattern; a generic exposed-pad land pattern should not be substituted without checking the package drawing.

Use the manufacturer-recommended 3.3 V decoupling network and place the bypass capacitors directly beside the corresponding supply and ground pins. Keep the supply return path through the exposed pad and ground plane continuous. Because the PHY is a single-supply device, verify that the MAC interface levels and clock source are compatible with 3.3 V before releasing the schematic, particularly when the host processor uses a different I/O voltage.

Confirm the exact Full MII clocking method, oscillator arrangement, and diagnostic pin requirements for the selected suffix before assigning nets. The family documentation identifies a 25 MHz crystal and, for the KSZ8081RNB, a 50 MHz RMII reference output; those details should not be transferred automatically to every package option. Use the exact manufacturer typical-application circuit and pin-description table to prevent clock-routing or signal-timing mistakes.

The 32-QFN relies on its exposed pad for effective heat transfer. Connect the pad to the recommended ground plane and add thermal vias where the footprint permits, while observing the manufacturer's soldering and via-in-pad guidance. Avoid placing the PHY beside a high-temperature source without recalculating junction temperature. Thermal performance depends on the final PCB copper area, via count, enclosure, and ambient temperature rather than package size alone.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The KSZ8081 is an Ethernet interface IC rather than an automotive-qualified product. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not confirmed for this exact ordering code.

Données vérifiées le : 2026-11-14 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

KSZ8081MNXCA datasheet KSZ8081MNXCA datasheet pdf KSZ8081MNXCA pinout KSZ8081MNXCA equivalent KSZ8081MNXCA replacement KSZ8081MNXCA price KSZ8081MNXCA stock KSZ8081MNXCA QFN-32 KSZ8081MNXCA 3.3V Ethernet PHY KSZ8081MNXCA Full MII KSZ8081MNXCA vs KSZ8081MNXIA-TR Microchip KSZ8081MNXCA

Composants & termes associés

Microchip Technology KSZ8081MNXCA KSZ8081 KSZ8081MNXIA-TR KSZ8081RNBCA-TR KSZ8081RNDCA-TR KSZ8081MNXCA-TR Ethernet PHY 10BASE-T 100BASE-TX physical-layer transceiver Full MII IEEE 802.3 CAT-5 UTP 3.3 V single-supply PHY 32-QFN QFN package family surface-mount package exposed thermal pad 25 MHz crystal 50 MHz RMII reference clock industrial networking embedded Ethernet Ethernet magnetics RJ45 connector
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ