Microchip Technology

KSZ8795CLXCC - 5-Port Managed Ethernet Switch | Microchip

Référence : KSZ8795CLXCC ✓ Actif
80-lead LQFP Package 10/100 Mbps Speed
MOQ : 1 |

KSZ8795CLXCC Présentation

The Microchip Technology KSZ8795CLXCC is a highly integrated, Layer 2-managed five-port Ethernet switch with four 10/100 Mbps copper ports and one 10/100/1000 Mbps Gigabit uplink port, housed in an 80-lead LQFP package measuring 10 mm by 10 mm. The device combines copper-port switching with Gigabit uplink connectivity for cost-sensitive embedded networking systems.

An Ethernet switch is a semiconductor that connects multiple physical-layer network ports to a common switching fabric and forwards Ethernet frames between ports and an uplink processor. The KSZ8795 operates at the Layer 2 data-link level, where frame destination addresses determine the outgoing port. Its managed architecture provides a practical platform for connected industrial, consumer, communications, and embedded equipment requiring several copper Ethernet connections.

The KSZ8795's principal features are its four dedicated 10/100 Mbps copper ports, dedicated 10/100/1000 Mbps uplink capability, and support for GMII/RGMII and MII/RMII processor interfaces. These parallel interface options let the switch connect to controllers with different clocking and data-width requirements. Layer 2 management supports controlled network behavior rather than operating solely as an unmanaged frame-forwarding device.

The KSZ8795CLXCC is packaged in an 80-lead LQFP, identified by the CLX package code in the manufacturer ordering information. Its 10 mm by 10 mm surface-mount package consolidates five-port switching, a Gigabit uplink, and management functions into one device. The exact pin names, voltage limits, timing limits, clock requirements, and electrical characteristics should be taken from the manufacturer datasheet and hardware design checklist when assigning PCB signals.

Typical implementations include industrial Ethernet gateways, IP cameras, building-automation controllers, communications equipment, set-top and media systems, and embedded products that expose several 10/100 ports while retaining a Gigabit connection to a host processor. The four fast ports support legacy 10/100 equipment, while the Gigabit uplink supports higher-bandwidth backhaul or processor traffic. MII, RMII, GMII, and RGMII connectivity allows the switch to be adapted to different embedded Ethernet controller arrangements.

PCB implementation requires careful separation of high-speed digital interfaces from copper-port circuitry. Place the KSZ8795CLX hardware design checklist alongside the datasheet, use the recommended magnetic-interface and termination network for each copper port, and observe the package's exposed-pad and thermal-land requirements. The manufacturer checklist specifies RJ45 transmit routing and a 75 ohm, 1000 pF, 2 kV capacitor network for the cable-side center tap, making those details important during layout review.

This page organizes the switch's port architecture, interface options, package information, sourcing workflow, and design references into an engineering-focused selection guide. It also identifies why the exact KSZ8795CLXCC ordering code must be reviewed against schematic, PCB, thermal, and firmware requirements rather than substituted solely by port count or headline uplink speed.

Alternatives de remplacement direct pour KSZ8795CLXCC — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Aucune alternative de remplacement direct disponible pour ce produit.

Demander des alternatives

KSZ8795CLXCC Valeurs maximales et caractéristiques électriques

Device Type Layer 2-managed Ethernet switch
Total Port Count 5 ports
10/100 Mbps Copper Port Count 4 ports
Gigabit Uplink Port Count 1 port
Copper Port Speed 10/100 Mbps
Gigabit Uplink Speed 10/100/1000 Mbps
Processor Interface GMII/RGMII and MII/RMII
Management Layer Layer 2
Package Type 80-lead LQFP
Package Dimensions 10 mm x 10 mm
Type de montage Surface mount
RJ45 Transmit Pair RJ45 pins 3 and 6
Cable-Side Center-Tap Termination 75 ohm through 1000 pF, 2 kV capacitor to chassis ground

Guide de configuration des broches du KSZ8795CLXCC 10 mm x 10 mm

Configuration des broches du KSZ8795CLXCC (boîtier 10 mm x 10 mm). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 10 mm x 10 mm pour le KSZ8795CLXCC

Aucune donnée de brochage détaillée disponible pour KSZ8795CLXCC.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

KSZ8795CLXCC convient pour 6 applications: Industrial Ethernet Gateway, IP Camera Network Interface, Building Automation Controller, Network Communications Equipment, Set-Top Box and Media Gateway, Industrial IoT Edge Controller.

🏭

Industrial Ethernet Gateway

The KSZ8795CLXCC fits an industrial gateway that must consolidate several slower copper devices while preserving a faster uplink to a controller or plant network. Its four 10/100 Mbps copper ports can connect sensors, controllers, or service interfaces, while the 10/100/1000 Mbps uplink provides higher-bandwidth backhaul. The available GMII, RGMII, MII, and RMII interfaces support different embedded-controller arrangements. Design review should confirm industrial temperature, power, clocking, isolation, and environmental requirements before production use.

🎥

IP Camera Network Interface

The KSZ8795CLXCC is suitable for an IP camera or imaging appliance that needs several local 10/100 Mbps links and a Gigabit connection to a network processor. Four copper ports can serve peripherals, service interfaces, or additional cameras, while the managed Layer 2 fabric provides controlled frame forwarding. The processor interface selection should be matched to the image processor's supported MII, RMII, GMII, or RGMII configuration. Magnetic-interface components, Ethernet magnetics, and connector-side termination must follow the manufacturer hardware checklist.

🏠

Building Automation Controller

The KSZ8795CLXCC can serve as the Ethernet switching element in a building-automation controller linking HVAC equipment, access-control units, sensors, and supervisory software. Four 10/100 Mbps ports support a practical mix of embedded Ethernet devices, while the Gigabit uplink handles traffic toward a building network. Managed Layer 2 operation is useful when the system needs controlled addressing and port behavior. Verify controller interface timing, system power architecture, isolation strategy, and environmental requirements before selecting the switch.

🌐

Network Communications Equipment

The KSZ8795CLXCC fits communications equipment that combines several 10/100 Mbps access connections with a Gigabit uplink to a host processor. A compact five-port switching function can reduce the number of discrete network interfaces required by an embedded access product. The choice among MII, RMII, GMII, and RGMII should follow the host processor's bus width, clocking, and signal-integrity requirements. Layout review should emphasize short processor traces, controlled return paths, and isolation from copper-port magnetics and connector circuitry.

📺

Set-Top Box and Media Gateway

The KSZ8795CLXCC is applicable to media gateways, set-top products, and consumer network appliances requiring multiple copper access ports plus a faster uplink. Four 10/100 Mbps ports can serve local service connections, while the Gigabit uplink supports video or data transfer toward a home router or access network. The compact 80-lead LQFP helps integrate switching without a discrete multi-chip arrangement. Firmware must support the selected management functions, and the PCB must implement the manufacturer's port termination and layout recommendations.

🧩

Industrial IoT Edge Controller

The KSZ8795CLXCC can support an IoT edge controller that gathers traffic from multiple wired endpoints and forwards it through a Gigabit uplink. Four 10/100 Mbps ports provide a practical bridge among sensors, actuators, service tools, and local controllers, while managed Layer 2 behavior supports predictable network operation. The processor interface and clock requirements must align with the edge-compute SoC, and the board design must account for copper-port magnetics, chassis-ground references, thermal performance, and electromagnetic isolation.

What is the KSZ8795CLXCC?
The KSZ8795CLXCC is a Microchip Technology Layer 2-managed, five-port Ethernet switch with four 10/100 Mbps copper ports and one 10/100/1000 Mbps Gigabit uplink. According to the manufacturer's KSZ8795 product page, the device is intended for cost-sensitive systems requiring multiple copper ports and a higher-speed uplink. It is supplied in an 80-lead LQFP package measuring 10 mm by 10 mm.
How many Ethernet ports does KSZ8795CLXCC provide?
The KSZ8795CLXCC provides five Ethernet ports in total: four 10/100 Mbps copper ports and one 10/100/1000 Mbps uplink port. The manufacturer product page identifies the device as a highly integrated Layer 2-managed switch designed to reduce system cost. The dedicated Gigabit uplink allows the four Fast Ethernet ports to connect copper-facing equipment while the host or network uplink carries traffic at up to 1000 Mbps.
Which processor interfaces are supported by KSZ8795CLXCC?
The KSZ8795CLXCC supports GMII, RGMII, MII, and RMII interfaces. The manufacturer datasheet identifies the family as supporting Gigabit GMII/RGMII and MII/RMII processor connections. These interfaces cover parallel and reduced-width parallel signaling arrangements, so controller compatibility, clocking, and PCB routing must be confirmed against the device's pin description and timing specifications before design release.
Where can I download the KSZ8795CLXCC datasheet PDF?
The official KSZ8795 datasheet and product resources are available through the Microchip Technology KSZ8795 product page at https://www.microchip.com/en-us/product/KSZ8795. The dedicated hardware design checklist is also available as a PDF from Microchip. Use the manufacturer documents to verify pin assignments, electrical limits, timing, magnetic-interface requirements, and PCB layout guidance for the exact CLX package.
Where can I find the KSZ8795CLXCC pinout?
The KSZ8795CLXCC pinout is documented in the Microchip manufacturer datasheet under the 80-lead LQFP CLX package. Use the pin-description table to identify supply rails, ground connections, processor-interface signals, management signals, and copper-port circuitry. Because the KSZ8795 has 80 physical leads, the package drawing and pin-description table should be used together when assigning PCB nets and checking land patterns.
Where can I buy KSZ8795CLXCC online?
The KSZ8795CLXCC can be requested through the Request a Quote form on this XAIPART page. The exact Microchip ordering code includes the KSZ8795CLXCC package suffix, so confirm that the quoted line item matches the 80-lead LQFP configuration and required production quantities. The manufacturer direct product listing also displays an in-stock partial-tray quantity and a factory lead-time estimate.
What is the price of KSZ8795CLXCC?
Pricing for the KSZ8795CLXCC depends on order quantity, package configuration, production status, and current factory availability. Use the Request a Quote form on this page to request the current unit price and volume breaks for the exact MPN. The structured pricing area refreshes commercial data independently, while this answer avoids publishing a figure that could become stale before procurement.
What is the lead time for KSZ8795CLXCC?
The manufacturer direct listing reports 13 units available as a partial tray, with estimated shipment on 31-Oct-2026 and a factory lead-time estimate of 15-Jan-2027, or approximately 11 weeks. The listing states that quote responses are returned within two business days. Confirm the latest allocation and shipment schedule through the Request a Quote form because factory timing can change.
Is KSZ8795CLXCC in stock?
The Microchip direct product listing reports 13 units in stock as a partial tray. This is a manufacturer-reported quantity rather than a guarantee of continuous availability, and the exact suffix KSZ8795CLXCC must match the requested configuration. Use the Request a Quote form on this page to confirm current inventory, allocation, and the shipment date applicable to your order.
KSZ8795CLXCC vs KSZ8721BLI-TR - which is better for an embedded Ethernet switch?
The KSZ8795CLXCC is the better match when the design specifically requires four 10/100 Mbps copper ports plus one 10/100/1000 Mbps Gigabit uplink and GMII/RGMII plus MII/RMII interfaces. The KSZ8721BLI-TR is a different Ethernet device and should not be treated as a drop-in replacement without a package, pin, interface, and feature comparison. Use the manufacturer comparison tools to evaluate the two designs.
When should I choose KSZ8795CLXCC over KSZ8721BLI-TR?
Choose the KSZ8795CLXCC when the product architecture requires four dedicated Fast Ethernet copper ports, a separate Gigabit uplink, and broad processor-interface support. Its manufacturer-described Layer 2-managed configuration is suited to embedded gateways, controllers, cameras, and industrial equipment. Select KSZ8721BLI-TR only when its own port count, interface, package, management, and PHY requirements match the target design more closely.
Is KSZ8795CLXCC suitable for an industrial Ethernet gateway?
The KSZ8795CLXCC is architecturally suitable for an industrial Ethernet gateway that combines several 10/100 Mbps device connections with a Gigabit uplink to a host processor. The four copper ports can serve local controllers or machines, while MII, RMII, GMII, or RGMII can interface with an embedded Ethernet controller. Final suitability depends on environmental ratings, power requirements, timing, and magnetic-interface implementation.
What can replace KSZ8795CLXCC?
No verified drop-in replacement for KSZ8795CLXCC is established by the available manufacturer and cross-reference information. A valid replacement must use the same 80-lead LQFP footprint, preserve pin-to-pin compatibility, and provide equivalent 10/100 copper-port, Gigabit-uplink, management, and processor-interface functions. Related Ethernet-switch ICs should be treated as design alternatives rather than inserted into an existing PCB without engineering review.
What is the best Microchip alternative for KSZ8795CLXCC?
Microchip offers related Ethernet-switch products, but the available cross-reference information does not identify an alternative that is a verified pin-to-pin substitute for the KSZ8795CLXCC. Start with the KSZ8795 family and use Microchip's cross-reference search or technical support to identify a candidate with matching port count, uplink speed, management features, package, and interface timing. Do not assume that a similar Ethernet category implies drop-in compatibility.
What are the key specifications of KSZ8795CLXCC that engineers should know?
The KSZ8795CLXCC combines four 10/100 Mbps copper ports, one 10/100/1000 Mbps Gigabit uplink, Layer 2-managed switching, and GMII/RGMII plus MII/RMII processor interfaces in an 80-lead 10 mm by 10 mm LQFP. According to the manufacturer product page, the integration is intended to reduce system cost. The key engineering checks are port configuration, controller interface, clocking, PHY support, power, thermal design, and package-level PCB compatibility.

Données de référence d'ingénierie pour KSZ8795CLXCC — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the KSZ8795CLXCC when the design needs a compact managed switching block with four 10/100 Mbps copper ports, one 10/100/1000 Mbps uplink, and support for MII, RMII, GMII, or RGMII host connectivity. It is particularly useful in gateways, controllers, cameras, and communications equipment that combine several legacy-speed local endpoints with a faster network connection. The LQFP package also consolidates multiple Ethernet functions into one IC, but careful attention remains necessary to magnetics, termination, clocking, supply sequencing, and layout. Do not select KSZ8721BLI-TR merely because it is also a Microchip Ethernet device; compare port count, uplink capability, management functions, package, and host-interface timing. Likewise, KSZ8081RNACA and TJA1057GTK/3Z represent different Ethernet-interface levels and are comparison references, not verified drop-in replacements. Existing KSZ8795CLXCC PCB designs should retain the exact 80-lead CLX footprint unless Microchip confirms a compatible alternative.

Comparaison avec les alternatives

Paramètre Ce produit KSZ8721BLI-TR KSZ8081RNACA TJA1057GTK/3Z
Brand Microchip Technology Microchip Technology Microchip Technology NXP Semiconductors
Device Category Layer 2-managed Ethernet switch Ethernet switch Ethernet interface IC Ethernet transceiver

Principaux différenciateurs

  • Combines multiple copper ports with a dedicated Gigabit uplink (vs KSZ8721BLI-TR)
  • Supports both reduced-width and Gigabit processor interfaces (vs KSZ8081RNACA)
  • Integrates switching and management rather than only a physical-layer transceiver (vs TJA1057GTK/3Z)

Notes de conception

Use the Microchip KSZ8795CLX hardware design checklist as the PCB layout baseline. The manufacturer specifically identifies RJ45 pins 3 and 6 as the transmit pair for the KSZ8795CLX. On the cable side of the transmit channel, terminate the center tap through the specified 75 ohm resistor and 1000 pF, 2 kV capacitor to chassis ground. Keep copper-port routing away from processor-interface clocks and sensitive return paths, and review the complete recommended component network before release.

Assign the switch's supply rails and ground pins directly from the manufacturer pin-description and power-supply sections rather than inferring connectivity from a block diagram. The available product information does not state the operating voltage range, current limits, sequencing requirements, or decoupling values, so these must remain engineering hold points. Confirm startup behavior, controller interface power states, magnetic-device requirements, and exposed thermal-pad connection in the datasheet before schematic release.

Select GMII, RGMII, MII, or RMII according to the host processor's supported clocking and data-width arrangement; nominal functional similarity does not make the interfaces electrically interchangeable. Follow the manufacturer trace-length, impedance, decoupling, and clock-routing guidance for the selected interface. Because processor-interface timing and I/O specifications are not published in the product summary, validate them from the datasheet and use the hardware checklist during signal-integrity review.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The product summary does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. These attributes must be confirmed from the manufacturer product declaration or ordering documentation.

Données vérifiées le : 2026-11-14 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

micrel ksz8795clxcc KSZ8795CLXCC datasheet KSZ8795CLXCC datasheet pdf KSZ8795CLXCC pinout KSZ8795CLXCC 80 LQFP KSZ8795CLXCC equivalent KSZ8795CLXCC replacement KSZ8795CLXCC vs KSZ8721BLI-TR KSZ8795CLXCC price KSZ8795CLXCC stock Microchip KSZ8795CLXCC KSZ8795 managed ethernet switch

Composants & termes associés

Microchip Technology KSZ8795CLXCC KSZ8795 KSZ8721BLI-TR KSZ8081RNACA TJA1057GTK/3Z Ethernet switch Layer 2 switch managed Ethernet switch Ethernet controller 10/100 Mbps Ethernet 10/100/1000 Mbps Gigabit Ethernet GMII RGMII MII RMII 80-lead LQFP LQFP package family surface-mount package copper Ethernet port Gigabit uplink managed switching embedded networking Ethernet magnetics chassis ground
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ