L9953SB - SPI Controlled 8-Channel Low-Side Driver | STMicroelectronics
Référence : L9953SB ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $6.5 | $6,50 |
| 10 | $5.85 | $58,50 |
| 100 | $5.2 | $520,00 |
| 500 | $4.68 | $2 340,00 |
| 1 000 | $4.16 | $4 160,00 |
L9953SB Présentation
A low-side driver is a type of power switch that connects the load to ground when activated, allowing the microcontroller to control high-side loads indirectly. In automotive systems, low-side drivers are essential for driving inductive loads like relays and solenoids, where the driver must handle back-EMF and provide diagnostic feedback. The L9953SB belongs to the family of smart power switches, which integrate protection and diagnostic features to enhance system reliability. These devices are part of the broader power management IC category, bridging the gap between logic-level control signals and high-power loads.
Key features of the L9953SB include eight low-side outputs with a maximum current rating of 1.2A per channel, a 16-bit SPI interface for control and diagnostics, and built-in protection against overcurrent, overtemperature, and short-circuit conditions. The device also provides open-load detection and a dedicated status output for fault reporting. The SPI interface operates at clock frequencies up to 5MHz, allowing fast and reliable communication with microcontrollers. The PowerSO-36 package ensures efficient heat dissipation, with a thermal resistance of 35°C/W, enabling continuous operation at high ambient temperatures.
From a technical perspective, the L9953SB utilizes a robust BCD (Bipolar-CMOS-DMOS) process technology, which combines the advantages of bipolar, CMOS, and DMOS transistors. This process enables high-voltage operation, low quiescent current, and precise analog control. The device includes a 16-bit shift register for SPI communication, with daisy-chain capability for multiple devices on a single bus. The output stages are designed to handle inductive loads with integrated freewheeling diodes, reducing the need for external components. The device also features a low quiescent current of 10µA in standby mode, making it suitable for battery-powered applications.
Typical applications include automotive body control modules, where the L9953SB drives relays for lights, wipers, and door locks. It is also used in industrial automation for controlling solenoids and valves, and in LED lighting systems for dimming and switching. The SPI interface allows for real-time diagnostics, enabling predictive maintenance and fault detection in critical systems. The device's wide operating temperature range of -40°C to +150°C ensures reliable operation in harsh environments.
When designing with the L9953SB, it is essential to provide adequate decoupling on the power supply pins and to ensure proper thermal management by connecting the exposed pad to a large copper area on the PCB. The SPI lines should be kept short and shielded to minimize noise, and the device's diagnostic features should be utilized to monitor load conditions and detect faults early. By following these guidelines, designers can maximize the reliability and performance of their systems.
Alternatives de remplacement direct pour L9953SB — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec L9953SB (même facteur de forme et même empreinte) — différant par Number of Channels, Package.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
L9953
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
L9953XP
✅ Remplacement direct✓ En stock
$4.06 / unité
Voir la fiche technique →MC33879
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
TLE6228
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
L9953SB Valeurs maximales et caractéristiques électriques
| Number of Channels | 8 low-side outputs |
| Output Current per Channel | 1.2 A |
| Supply Voltage (Logic) | 4.5 V to 5.5 V |
| Supply Voltage (Power) | 4.5 V to 28 V |
| SPI Interface | 16-bit, up to 5 MHz |
| Quiescent Current (Standby) | 10 µA |
| Plage de température de fonctionnement | -40°C to +150°C |
| Boîtier | PowerSO-36 Exposed Bottom Pad |
| Résistance thermique, jonction-ambiance | 35 °C/W |
| Process Technology | BCD (Bipolar-CMOS-DMOS) |
| Protection Features | Overcurrent, Overtemperature, Short-Circuit |
| Open-Load Detection | Yes |
| Status Output | Dedicated fault reporting |
| Freewheeling Diodes | Integrated for inductive loads |
| Daisy-Chain Capability | Yes |
| Statut RoHS | Compliant |
Configuration des broches de L9953SB
| Broche 1 | OUT1 — Low-side output channel 1 |
| Broche 2 | OUT2 — Low-side output channel 2 |
| Broche 3 | OUT3 — Low-side output channel 3 |
| Broche 4 | OUT4 — Low-side output channel 4 |
| Broche 5 | OUT5 — Low-side output channel 5 |
| Broche 6 | OUT6 — Low-side output channel 6 |
| Broche 7 | OUT7 — Low-side output channel 7 |
| Broche 8 | OUT8 — Low-side output channel 8 |
| Broche 9 | VCC — Logic supply voltage (4.5V to 5.5V) |
| Broche 10 | GND — Ground |
| Broche 11 | VS — Power supply voltage (4.5V to 28V) |
| Broche 12 | SCK — SPI clock input |
| Broche 13 | SDI — SPI data input |
| Broche 14 | SDO — SPI data output |
| Broche 15 | CS — SPI chip select (active low) |
| Broche 16 | STATUS — Fault status output |
Applications typiques
L9953SB convient pour 6 applications: Automotive Body Control Module, Industrial Automation Solenoid Control, LED Lighting Control, Door Actuator Driver, Relay Driver for Power Distribution, HVAC Actuator Control.
Automotive Body Control Module
The L9953SB is ideal for automotive body control modules where it drives relays for lights, wipers, and door locks. Its 8 low-side outputs can control multiple loads, and the SPI interface provides real-time diagnostics for fault detection. The wide operating temperature range of -40°C to +150°C ensures reliable operation in harsh automotive environments. The device's built-in protection against overcurrent, overtemperature, and short-circuit conditions enhances system reliability. According to the STMicroelectronics datasheet, the L9953SB is specifically designed for automotive door actuator applications, making it a perfect fit for body control modules.
Recommandé
Industrial Automation Solenoid Control
In industrial automation, the L9953SB is used to control solenoids and valves in pneumatic and hydraulic systems. Its 8 low-side outputs can drive multiple solenoids, and the SPI interface allows for precise control and monitoring. The device's low quiescent current of 10µA in standby mode is beneficial for energy-efficient systems. The built-in freewheeling diodes handle the inductive load of solenoids, reducing the need for external components. According to the STMicroelectronics datasheet, the device's robust protection features ensure reliable operation in demanding industrial environments.
Recommandé
LED Lighting Control
The L9953SB is suitable for LED lighting systems where it provides switching and dimming control. Its 8 low-side outputs can drive multiple LED strings, and the SPI interface enables precise brightness control. The device's wide supply voltage range of 4.5V to 28V makes it compatible with various LED power supplies. The open-load detection feature helps identify faulty LED strings, improving system reliability. According to the STMicroelectronics datasheet, the device's thermal performance in the PowerSO-36 package supports continuous operation in lighting applications.
Recommandé
Door Actuator Driver
The L9953SB is specifically designed as a door actuator driver for automotive applications. It can drive up to three DC motors and three grounded resistive loads using five half bridges and three highside drivers. The integrated SPI interface controls all operation modes including forward, reverse, brake, and high impedance. According to the STMicroelectronics datasheet, the device provides comprehensive diagnostic feedback, making it ideal for smart door systems. The PowerSO-36 package ensures efficient heat dissipation for continuous motor operation.
Recommandé
Relay Driver for Power Distribution
The L9953SB is used to drive relays in power distribution systems, such as those found in automotive fuse boxes and industrial control panels. Its 8 low-side outputs can control multiple relays, and the SPI interface provides status monitoring. The device's built-in protection against overcurrent and short-circuit conditions prevents damage to the relays and the driver itself. According to the STMicroelectronics datasheet, the device's wide operating temperature range makes it suitable for various environments. The low quiescent current is beneficial for always-on systems.
Recommandé
HVAC Actuator Control
The L9953SB is used in HVAC systems to control actuators for air dampers and valves. Its 8 low-side outputs can drive multiple actuators, and the SPI interface enables precise positioning. The device's wide supply voltage range of 4.5V to 28V is compatible with various HVAC power supplies. The built-in diagnostic features help detect actuator faults, improving system reliability. According to the STMicroelectronics datasheet, the device's robust design ensures reliable operation in the demanding HVAC environment.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour L9953SB — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | L9953 | L9953XP | MC33879 | TLE6228 |
|---|---|---|---|---|---|
| Package | PowerSO-36 | PowerSO-36 - same | PowerSO-36 - same | PowerSO-36 - same | PowerSO-36 - same |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | NXP Semiconductors | Infineon |
| Number of Channels | 8 low-side | 8 low-side | 8 low-side | 8 low-side | 8 low-side |
Principaux différenciateurs
- 8 low-side outputs with 1.2A per channel (vs MC33879)
- Wide operating temperature range of -40°C to +150°C (vs TLE6228)
- Low quiescent current of 10µA in standby (vs MC33879)
Notes de conception
Ensure adequate decoupling on the VCC and VS pins. Place a 100nF ceramic capacitor close to each supply pin and a 10µF electrolytic capacitor on the VS pin to handle transient currents. According to the STMicroelectronics datasheet, proper decoupling is essential for stable operation and to prevent voltage spikes that could damage the device.
The PowerSO-36 package has a thermal resistance of 35°C/W. For high-current applications, connect the exposed pad to a large copper area on the PCB to improve heat dissipation. According to the STMicroelectronics datasheet, this is critical for maintaining junction temperature within safe limits, especially at high ambient temperatures up to 150°C.
Keep SPI lines (SCK, SDI, SDO, CS) short and shielded to minimize noise and ensure reliable communication at up to 5MHz. According to the STMicroelectronics datasheet, proper PCB layout is important for signal integrity, especially in automotive environments with high electromagnetic interference.
Informations de conformité
RoHS compliance is indicated in the internal database. Other compliance information is not explicitly stated in the provided data.
