LAN91C96QFP - 10Mbps Ethernet Controller | Microchip Technology
Référence : LAN91C96QFP ✓ ActifLAN91C96QFP Présentation
An Ethernet controller is a network interface semiconductor that manages frame transmission, reception, addressing, and the host-side data path between a processor and an Ethernet network. Within the product hierarchy, the LAN91C96 is an Ethernet MAC controller, an interface IC, a communications semiconductor, and a surface-mount integrated circuit. Its non-PCI architecture allows it to connect through processor-specific bus interfaces rather than requiring a PCI peripheral bus.
The principal identified features are a 10Mbps data rate, 10BASE-T twisted-pair operation, full-duplex operation, integrated MAC and physical-layer functions, and embedded packet RAM. The controller supports Local Bus, PCMCIA, and Motorola 68000 bus interfaces according to the manufacturer documentation. Magic Packet capability provides a conventional mechanism for waking a remote system through a specially formatted network frame.
The integrated architecture reduces the number of discrete devices required to implement a 10BASE-T network node. MAC processing, physical-layer functionality, and packet buffering are consolidated into one controller, while the host processor communicates through the supported local interfaces. This integration is particularly useful in legacy embedded systems designed around non-PCI buses rather than modern PCI Express networking devices.
Typical applications include embedded control systems, industrial equipment, legacy communication appliances, and compact network-access products requiring a 10Mbps Ethernet node. The device can also support remote system management through Magic Packet wake-up when the host platform retains enough power to monitor and reactivate its Ethernet interface.
PCB implementation requires careful assignment of the 100-pin package, power distribution, clocking, reset, memory, and network-magnetics connections according to the manufacturer datasheet. Because this part is an older Ethernet controller, its voltage, timing, temperature, and transceiver-interface limits should be checked against the exact system requirements before design release.
This page organizes the confirmed controller capabilities, package information, sourcing paths, replacement constraints, and engineering considerations into a concise design reference. It also distinguishes true pin-compatible substitutions from related family members so legacy-system maintenance can proceed without an unsupported footprint assumption.
Alternatives de remplacement direct pour LAN91C96QFP — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesLAN91C96QFP Spécifications
| Device Type | Non-PCI single-chip full-duplex Ethernet controller |
| Ethernet Data Rate | 10 Mbps |
| Ethernet Standard | IEEE 802.3 |
| Physical Layer | 10BASE-T |
| Operating Mode | Full duplex |
| MAC Function | Integrated Ethernet MAC |
| Physical-Layer Function | Integrated 10BASE-T physical layer |
| Packet Storage | Integrated packet RAM |
| Host-Bus Interfaces | Local Bus, PCMCIA, and Motorola 68000 |
| PCI Interface | Not required |
| Remote Wake Feature | Magic Packet |
| Package Type | 100-pin QFP |
| Package Dimensions | 20 mm x 14 mm |
| Type de montage | Surface mount |
Guide de configuration des broches du LAN91C96QFP 20 mm x 14 mm
Configuration des broches du LAN91C96QFP (boîtier 20 mm x 14 mm). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour LAN91C96QFP.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
LAN91C96QFP convient pour 6 applications: Legacy Embedded Ethernet Node, Industrial Control Equipment, Remote Power Management, Network-Connected Data Acquisition, Communication Appliance, Embedded Service Console.
Legacy Embedded Ethernet Node
The LAN91C96QFP fits legacy embedded systems that need a dedicated 10Mbps Ethernet controller rather than a host-integrated network interface. Its non-PCI architecture supports Local Bus, PCMCIA, and Motorola 68000 connectivity, while the integrated MAC, physical layer, and packet RAM reduce the external component count. This combination is useful when an embedded processor lacks suitable Ethernet peripherals or when the product was designed around a conventional bus-attached network controller. Confirm signal timing, voltage, and clock requirements against the manufacturer datasheet before layout release.
Recommandé
Industrial Control Equipment
The LAN91C96QFP is appropriate for industrial control equipment that uses a legacy processor bus and requires a 10BASE-T management or communications port. Its full-duplex 10Mbps Ethernet support can provide a dedicated network path for configuration, status reporting, and supervisory control without requiring a PCI peripheral. The integration of the MAC, physical layer, and packet RAM supports a compact controller implementation. Industrial suitability still depends on verifying the device's electrical and temperature limits and the grounding requirements of the selected Ethernet magnetics.
Recommandé
Remote Power Management
The LAN91C96QFP supports Magic Packet wake-up, making it relevant to embedded systems that must remain partially powered and respond to a remote activation command. The host firmware can detect the designated frame through the integrated Ethernet receive path and then bring additional system rails or peripherals online. This approach differs from continuously powering the complete product and can reduce the amount of circuitry that must remain active. The power-state design must ensure that the Ethernet receive function and required controller rails operate in the low-power state.
Recommandé
Network-Connected Data Acquisition
The LAN91C96QFP can serve as the communication controller in a legacy data-acquisition unit whose processor communicates through Local Bus or PCMCIA. The 10Mbps full-duplex Ethernet interface provides a dedicated path for transferring measurement records, configuration commands, and diagnostic information over 10BASE-T. Integrating the MAC, physical layer, and packet RAM allows the design to avoid a separate Ethernet controller and buffer device. System designers should assess whether 10Mbps meets the required sustained data rate and include appropriate Ethernet magnetics and isolation in the interface.
Recommandé
Communication Appliance
The LAN91C96QFP is a practical choice for communication appliances built around legacy processor buses, including monitoring, gateway, and serial-to-Ethernet equipment. Its non-PCI design permits direct attachment to Local Bus, PCMCIA, or Motorola 68000 style host interfaces, while the integrated controller handles 10BASE-T networking at 10Mbps. The part is especially relevant when maintaining an established board design is more important than adopting a newer Ethernet architecture. Firmware drivers and register compatibility must be evaluated as part of a drop-in replacement effort.
Recommandé
Embedded Service Console
The LAN91C96QFP can provide network access for an embedded service console that needs remote configuration and status reporting over 10BASE-T. Because the device includes an Ethernet MAC, physical layer, and packet RAM, the implementation can remain centered on the host processor and its existing bus interface. Full-duplex operation supports simultaneous command traffic and data transfer within the device's 10Mbps class. Product planners should validate environmental requirements, interface timing, and connector magnetics before using this legacy controller in a new service-oriented platform.
Recommandé
Données de référence d'ingénierie pour LAN91C96QFP — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit |
|---|---|
| Product Type | Non-PCI single-chip full-duplex Ethernet controller |
| Ethernet Data Rate | 10 Mbps |
| Ethernet Standard | IEEE 802.3 |
| Physical Layer | 10BASE-T |
| Host-Bus Interfaces | Local Bus, PCMCIA, and Motorola 68000 |
| Integrated Functions | MAC, physical layer, and packet RAM |
| Wake Feature | Magic Packet |
| Package | 100-pin QFP, 20 mm x 14 mm |
| Brand | Microchip Technology |
Principaux différenciateurs
- Combines the MAC, physical layer, and packet RAM (vs A discrete Ethernet controller and external packet-memory design)
- Supports three legacy host-bus styles (vs A PCI-based Ethernet controller)
- Provides dedicated 10BASE-T connectivity (vs A host with an integrated 100BASE-TX or Gigabit Ethernet interface)
Notes de conception
Assign the LAN91C96QFP layout from the manufacturer pin-description table rather than from a generic 100-pin QFP footprint. Preserve the documented location of power, ground, clock, reset, bus, memory, and Ethernet-interface signals, and route sensitive clock and packet-buffer connections away from switching nodes. Confirm the 20 mm by 14 mm package dimensions and lead pitch against the selected symbol and land pattern before fabrication.
Use separate filtering paths for controller, clock, and Ethernet-interface supplies where the datasheet permits it. Place required bypass capacitors at the associated supply pins with short ground returns, and keep the input and return paths compact. The exact capacitor values, voltage limits, and sequencing requirements must come from the manufacturer datasheet because they are not stated in the product summaries.
Design the 10BASE-T network connection with the magnetics and connector placement required by the manufacturer interface guidance. Keep the Ethernet signal path controlled, provide the intended reference-plane connection, and isolate noisy switching circuitry from clock and receive paths. Differential pair geometry and impedance implementation should follow the selected magnetics and board stack-up rather than generic controller-layout assumptions.
Do not treat LAN91C96TQFP or LAN91C96I-MU as drop-in substitutes without comparing their exact pin tables and package drawings. Also do not assume that all LAN91C96-family devices expose identical host-bus or Magic Packet behavior. A replacement should match the 100-pin assignment, 10Mbps 10BASE-T interface, voltage requirements, clocking, reset behavior, and firmware expectations before its part number is released for production.
Informations de conformité
The available product descriptions do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Obtain a current declaration from Microchip Technology before production release.