LAN91C93I-MC Full-Duplex Ethernet Controller | Microchip
Référence : LAN91C93I-MC ✓ ActifLAN91C93I-MC Présentation
An Ethernet controller is a semiconductor interface between a host processor and an Ethernet network. Within the product hierarchy, LAN91C93I-MC is an Ethernet controller, network interface controller, interface IC, and semiconductor. Its local-bus architecture avoids requiring a PCI bus while giving embedded processors direct access to Ethernet communication functions through a comparatively simple software interface.
The controller supports full-duplex switched Ethernet and maintains independent transmit and receive operations. This architecture can improve effective communication concurrency compared with a controller that must coordinate both directions through one path. The 1.25 MB/s rated transfer rate and 10 Base-T PHY interface identify the LAN91C93I-MC as a 10 Mb/s-class embedded Ethernet solution rather than a Fast Ethernet or Gigabit Ethernet controller.
According to the manufacturer datasheet, LAN91C93I is designed to be 100% software compatible with LAN91C92, LAN91C94, and LAN91C96 when operating in local-bus mode. This compatibility is particularly useful when preserving an established driver and application interface is more important than redesigning the entire network software stack. The integrated device also retains LAN91C92 functionality for local-bus environments.
Typical applications include embedded industrial control, instrument networking, embedded appliance connectivity, point-of-sale equipment, and legacy embedded systems that require full-duplex switched Ethernet. The 100-QFP package exposes the controller's processor-side, memory-side, Ethernet, and power connections through a relatively high pin count suited to multilayer or through-hole-compatible board assembly.
Designers should verify the complete pin description, voltage limits, clocking requirements, initialization sequence, and transceiver interface in the manufacturer datasheet before layout release. They should also confirm that the external magnetics, RJ-5 interface, isolation requirements, and system grounding topology suit the target network environment rather than assuming that the controller alone constitutes a complete Ethernet interface.
This product overview combines the manufacturer interface description, package details, software-compatibility information, verified alternatives, and practical selection considerations. It also identifies where an engineer must consult the official datasheet for complete electrical limits and PCB implementation details.
Alternatives de remplacement direct pour LAN91C93I-MC — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec LAN91C93I-MC (même facteur de forme et même empreinte) — différant par Data Rate, Product Type.
LAN91C93I-MS
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →LAN91C93I-MC Spécifications
| Product Type | Non-PCI single-chip Ethernet controller |
| Ethernet Mode | Full-duplex switched Ethernet |
| Débit de données | 1.25 MB/s |
| PHY Interface | IEEE 802.3 10 Base-T |
| Channel Count | 2 channels |
| Bus Architecture | Local bus |
| PCI Interface | No PCI interface |
| Transmit and Receive Operation | Fully independent transmit and receive operations |
| Software Compatibility | 100% compatible with LAN91C92, LAN91C94, and LAN91C96 in local-bus mode |
| Process Technology | CMOS |
| Boîtier | 100-pin QFP |
| Package Body Size | 14 x 20 mm |
| Terminal Form | Gull wing |
| Temperature Grade | Industrial |
| Type de montage | Surface mount |
Guide de configuration des broches du LAN91C93I-MC 14 x 20 mm
Configuration des broches du LAN91C93I-MC (boîtier 14 x 20 mm). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour LAN91C93I-MC.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
LAN91C93I-MC convient pour 6 applications: Industrial Embedded Controller Networking, Embedded Instrument Data Acquisition, Embedded Appliance Connectivity, Point-of-Sale Terminal, Legacy Network Interface Upgrade, Networked Process Monitoring.
Industrial Embedded Controller Networking
The LAN91C93I-MC fits industrial embedded controllers that exchange supervisory and configuration data over a 10 Mb/s Ethernet network. Its 1.25 MB/s data rate is suitable for moderate-rate local traffic, while full-duplex switched Ethernet and independent transmit and receive paths support simultaneous control traffic and status reporting. The local-bus interface avoids a PCI dependency and can simplify integration with a processor that already uses a dedicated network interface. Before schematic release, verify the processor-bus timing, reset sequence, PHY connectivity, and operating limits in the manufacturer datasheet.
Recommandé
Embedded Instrument Data Acquisition
LAN91C93I-MC is appropriate for data-acquisition instruments that must transfer measurements, configuration packets, and diagnostic records through Ethernet. Its 1.25 MB/s rate is relevant to moderate-volume operational data rather than continuous high-bandwidth streaming. Full-duplex operation allows measurement traffic and management commands to coexist, while the 10 Base-T interface provides a conventional network attachment point. Validate PHY magnetics, isolation, grounding, and the required transceiver implementation as part of the complete Ethernet front end.
Recommandé
Embedded Appliance Connectivity
The LAN91C93I-MC can connect an embedded appliance to a 10 Mb/s Ethernet network for configuration, status monitoring, and service access. The non-PCI local-bus architecture is useful when the host processor has no conventional PCI bus or when the appliance requires a dedicated network controller. Its fully independent transmit and receive operations support bidirectional communication on switched networks. Designers should confirm that the 100-QFP footprint, software driver requirements, and external network interface suit the appliance's mechanical and thermal design.
Recommandé
Point-of-Sale Terminal
A point-of-sale terminal can use LAN91C93I-MC for transaction traffic, peripheral status exchange, and network management over full-duplex Ethernet. The 1.25 MB/s rate is suitable for intermittent commercial transactions and control data, while independent transmit and receive paths help avoid unnecessary contention between uploads and responses. The local-bus interface allows the controller to operate without a PCI peripheral bus. Before deployment, assess the product's long-term software support, security needs, and whether the physical network and connector implementation meet site requirements.
Recommandé
Legacy Network Interface Upgrade
LAN91C93I-MC is useful when upgrading an established local-bus embedded network design that requires full-duplex switched Ethernet without changing the software model. The manufacturer reports 100% software compatibility with LAN91C92, LAN91C94, and LAN91C96 in local-bus mode, reducing driver-porting effort. Hardware migration still requires exact pin, timing, voltage, and mechanical checks because software compatibility alone does not prove drop-in interchangeability. This makes LAN91C93I-MC most attractive in controlled redesigns where board changes can be planned and tested.
Recommandé
Networked Process Monitoring
LAN91C93I-MC supports process-monitoring nodes that periodically report sensor state, alarms, and operating counters to a supervisory network. Its 1.25 MB/s rate accommodates typical low-bandwidth telemetry, and full-duplex operation permits status reports and configuration commands to proceed independently. The industrial-temperature designation makes it a candidate for embedded monitoring equipment, subject to confirmation of the complete operating-temperature range and environmental qualification. The board should also provide a suitable Ethernet isolation or surge-protection strategy.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour LAN91C93I-MC — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | LAN91C93I-MS |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | QFP-100 (14 x 20 mm) | 100-QFP (14 x 20 mm) - same package family |
| Product Type | Non-PCI single-chip Ethernet controller | Ethernet controller |
| Ethernet Interface | IEEE 802.3 10 Base-T PHY interface | IEEE 802.3 10 Base-T PHY interface |
Principaux différenciateurs
- Adds full-duplex switched-Ethernet operation while retaining the local-bus software model (vs LAN91C92)
- Avoids a PCI bus dependency in embedded Ethernet designs (vs LAN91C93I-MS)
- Provides a 100-pin industrial-temperature QFP implementation (vs LAN91C93I-MS)
Notes de conception
Route the local-bus signals according to the manufacturer datasheet, paying particular attention to clock, address, data, and control timing. A 100-QFP package provides many closely spaced terminals, so use an appropriate via fanout and avoid long stubs beneath the device. The PCB layout should also provide a stable ground plane and short return paths because the Ethernet PHY and digital control sections operate in the same high-density footprint.
Follow the reference network interface in the manufacturer datasheet when connecting the controller to Ethernet magnetics and the RJ-45 network. Preserve the specified differential-impedance geometry, separation from noisy switching paths, and grounding arrangement at the isolation boundary. The controller's 10 Base-T PHY capability does not define the complete external Ethernet front end, which also requires suitable magnetics and protection components.
Do not interpret the documented software compatibility among LAN91C93I, LAN91C92, LAN91C94, and LAN91C96 as proof of identical pinout or electrical interchangeability. Confirm ordering suffixes, temperature grade, package dimensions, clock requirements, supply voltage, reset behavior, and signal directions against the relevant manufacturer documentation. A replacement should be approved only after schematic, timing, and firmware regression checks pass.
Place decoupling structures directly at the appropriate power terminals and follow the manufacturer's recommended layout for clocks and sensitive interfaces. Keep the Ethernet-side magnetics and protection components near the board connector rather than routing high-speed digital signals through the network front end. Provide thermal copper around the 100-pin QFP where practical, while checking the exposed thermal requirements and package-specific land pattern in the official documentation.
Informations de conformité
The product is an industrial-temperature Ethernet controller rather than an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established by the manufacturer product-page excerpts.