LC4064B-5T100I - 64-Macro CPLD, 5 ns, 100-TQFP | Lattice
Référence : LC4064B-5T100I ✓ ActifLC4064B-5T100I Présentation
A CPLD is a user-programmable semiconductor that sits between simple programmable logic arrays and more complex programmable logic devices. Its internal macro cells are organized to implement combinational and sequential logic through a deterministic interconnect structure. The LC4064B family offers useful logic density for interface control, bus arbitration, state-machine implementation, data conditioning, and embedded glue logic without requiring a large FPGA or a discrete gate array.
The LC4064B-5T100I is identified by the “-5” speed grade, a 5 ns rated operating speed, and the “I” industrial temperature designation. Its 100-pin TQFP package provides 100 external terminals and is suited to automated PCB assembly and conventional surface-mount manufacturing. The family description identifies in-system programmability, allowing a configured design to be updated through the device programming interface rather than relying only on a factory-programmed configuration.
Programmable logic is implemented by configuring the device’s internal macro-cell and interconnect resources to create the required Boolean functions, registers, and control paths. This makes the CPLD useful for consolidating small amounts of control logic that would otherwise require multiple GAL-type devices, discrete counters, or complex glue logic. Because configuration is nonvolatile, the implemented logic remains available after power is removed and restored, subject to the device’s specified configuration and power behavior.
Typical uses include industrial interface logic, data-acquisition and test systems, communication-control blocks, embedded control systems, and product-interconnect logic. The 64 macro cells are especially useful when several control paths must share registered state, handshake signals, or fixed interface logic. The programmable architecture also supports design revisions because logic functions can be changed without replacing the physical device.
PCB design should preserve the exact pin assignments and power-decoupling requirements defined in the Lattice Semiconductor datasheet and pinout documentation. Place the device-programming interface so it remains accessible during production or field update, route unused inputs to defined levels, and validate timing against the selected 5 ns speed grade and actual operating voltage. Industrial-temperature production designs should also verify the full operating-temperature requirement and sourcing constraints during qualification.
This product page consolidates the device identity, package information, programming characteristics, comparison options, and practical implementation guidance. It is intended to help engineers distinguish speed-grade, temperature-grade, and family-variant differences while planning a board-level replacement without relying on the part number alone.
Alternatives de remplacement direct pour LC4064B-5T100I — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec LC4064B-5T100I (même facteur de forme et même empreinte) — différant par Device Type, Package, Temperature Grade, Product Family.
LC4064B-10T100I
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
LC4064B-5T100C
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →LC4064B-75T100I
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
LC4064V-5T100I
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →LC4064C-5T100I
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →LC4064B-5T100I Valeurs maximales et caractéristiques électriques
| Device Type | Complex Programmable Logic Device (CPLD) |
| Product Family | ispMACH 4000B |
| Macro Cell Count | 64 macro cells |
| System Speed | 5 ns |
| Architecture | SuperFAST high-density PLD |
| Programmability | In-system programmable |
| Configuration Memory | Nonvolatile |
| Supply Voltage Options | 3.3 V, 2.5 V, or 1.8 V |
| Boîtier | 100-pin TQFP |
| Terminal Count | 100 terminals |
| Type de montage | Surface mount |
| Package Shape | Square flatpack |
| Lead Form | Gull wing |
| Temperature Grade | Industrial grade |
Guide de configuration des broches du LC4064B-5T100I square flatpack
Configuration des broches du LC4064B-5T100I (boîtier square flatpack). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour LC4064B-5T100I.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
LC4064B-5T100I convient pour 6 applications: Industrial Interface Control, Data-Acquisition Signal Conditioning, Communication Protocol Control, Test and Measurement Systems, Embedded State-Machine Control, Bus Arbitration and Data Routing.
Industrial Interface Control
The LC4064B-5T100I is well suited to industrial interface control because its 64 macro cells can combine address decoding, command validation, handshake sequencing, and fault-latching functions in one programmable device. The 5 ns speed designation supports short combinational and registered control paths, while the industrial “I” suffix supports designs intended for extended temperature environments. A typical implementation places the CPLD between a host processor and peripheral connectors, using dedicated registers to coordinate data-ready, acknowledge, error, and reset signals. The principal design consideration is preserving deterministic timing around asynchronous inputs by synchronizing them and applying explicit timing constraints.
Recommandé
Data-Acquisition Signal Conditioning
The LC4064B-5T100I can implement the control logic around a multi-channel data-acquisition system, including channel selection, sample sequencing, trigger qualification, and data-valid generation. Its 64 macro cells allow the design to consolidate several small state machines without using separate counters or programmable logic packages. The 5 ns grade provides useful timing margin for registered control paths, while in-system programmability permits field adjustment of channel maps and acquisition sequences. Engineers should check the device’s available I/O count against the converter interface and ensure every trigger or sample-control signal receives the required reset and clock-domain treatment.
Recommandé
Communication Protocol Control
The LC4064B-5T100I is applicable to communication protocol control where a small amount of deterministic glue logic is needed between a processor and an external transceiver or controller. Its programmable macro cells can implement frame detection, byte counting, parity handling, FIFO control, status flags, and timeout generation. The 5 ns speed rating supports compact registered logic, and the 100-pin TQFP package offers a substantial I/O complement for parallel control paths. The implementation should establish one clocking strategy, constrain all paths to the selected speed grade, and verify that programming pins and configuration signals are accessible if in-system updates are required.
Recommandé
Test and Measurement Systems
In test and measurement equipment, the LC4064B-5T100I can consolidate trigger routing, instrument sequencing, status decoding, and front-panel control into one programmable logic device. Its 64 macro cells allow multiple related control paths to share registers and internal interconnect resources, reducing component count compared with separate small programmable logic devices. The 5 ns grade is useful when control outputs must respond quickly to latch and capture events, and the industrial suffix broadens its suitability for laboratory and production-test equipment. Designers should budget available I/O carefully because each instrument-facing signal consumes package terminals and may require a dedicated termination or level-shifting arrangement.
Recommandé
Embedded State-Machine Control
The LC4064B-5T100I is a natural fit for embedded state-machine control that coordinates sensors, actuators, power sequencing, and system modes. Its 64 macro cells can encode several related state transitions and output-valid signals, while the 5 ns grade provides deterministic propagation for fast control loops. Nonvolatile configuration allows the same hardware platform to retain its programmed behavior across power cycles, and in-system programming supports controlled firmware or logic updates. The implementation should define reset behavior for every state, avoid combining unrelated clock domains without synchronization, and use the datasheet timing information to establish worst-case path margins.
Recommandé
Bus Arbitration and Data Routing
The LC4064B-5T100I can implement bus arbitration, address decoding, request priority, and programmable data-routing functions between processors and peripherals. Its 5 ns speed designation supports deterministic response paths, while the 64 macro cells provide enough density to combine related arbitration and decode functions rather than splitting them across separate devices. A practical design uses registered outputs where timing or fan-out requires them and defines bus ownership during reset to prevent contention. Before schematic capture, engineers should map all bus and request signals to the complete 100-pin package and verify that the chosen I/O structure supports the intended voltage and signaling method.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour LC4064B-5T100I — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | LC4064B-10T100I | LC4064B-5T100C | LC4064B-75T100I | LC4064V-5T100I | LC4064C-5T100I |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 100-pin TQFP | 100-pin TQFP | 100-pin TQFP | 100-pin TQFP | 100-pin TQFP | 100-pin TQFP |
| Speed Designation | 5 ns | 10 ns | 5 ns | 7.5 ns | 5 ns | 5 ns |
| Temperature Suffix | Industrial | Industrial | Commercial | Industrial | Industrial | Industrial |
| Family Suffix | LC4064B | LC4064B | LC4064B | LC4064B | LC4064V | LC4064C |
Principaux différenciateurs
- Faster speed designation than the 10 ns family option (vs LC4064B-10T100I)
- Industrial-temperature ordering option (vs LC4064B-5T100C)
- Closer timing match than the 7.5 ns variant (vs LC4064B-75T100I)
- Original B-family configuration retained (vs LC4064V-5T100I)
Notes de conception
Use the manufacturer’s 100-pin TQFP land pattern and maintain the documented clearance for all gull-wing leads. Route the programming interface to accessible test points if the product must be programmed or updated after assembly. A short, direct connection between the programmer and device reduces susceptibility to programming-signal degradation and simplifies production validation.
Apply the supply voltage and decoupling configuration specified for the selected operating mode. Place bypass capacitors close to the appropriate power and ground pins, provide a clean return path, and avoid switching-current loops beneath the device. The 5 ns speed designation should be validated against actual clock and I/O timing constraints rather than treated as a guaranteed system-level delay.
Do not approve a substitute solely from the package and macro-cell count. LC4064B speed, LC4064V family, LC4064C family, and commercial-versus-industrial suffixes can change timing, electrical behavior, qualification, or programming requirements. Rebuild the device configuration for the selected MPN and compare the complete datasheet tables, pin definitions, and programming constraints before releasing the PCB.
Assign external clock and asynchronous control inputs deliberately, then constrain the design against the selected 5 ns grade. Synchronize asynchronous request, interrupt, and acknowledgement signals before they enter registered state machines. Keep programming and configuration pins away from noisy switching nodes, and use the package drawing as the authoritative source for pin numbering and exposed thermal-pad requirements.
Informations de conformité
The manufacturer datasheet and product listings do not state the requested compliance fields in a form that supports a definitive classification.