LC4064B-5T100I - 64-Macro CPLD, 5 ns, 100-TQFP | Lattice
MPN: LC4064B-5T100I ✓ 啟用中LC4064B-5T100I 概覽
A CPLD is a user-programmable semiconductor that sits between simple programmable logic arrays and more complex programmable logic devices. Its internal macro cells are organized to implement combinational and sequential logic through a deterministic interconnect structure. The LC4064B family offers useful logic density for interface control, bus arbitration, state-machine implementation, data conditioning, and embedded glue logic without requiring a large FPGA or a discrete gate array.
The LC4064B-5T100I is identified by the “-5” speed grade, a 5 ns rated operating speed, and the “I” industrial temperature designation. Its 100-pin TQFP package provides 100 external terminals and is suited to automated PCB assembly and conventional surface-mount manufacturing. The family description identifies in-system programmability, allowing a configured design to be updated through the device programming interface rather than relying only on a factory-programmed configuration.
Programmable logic is implemented by configuring the device’s internal macro-cell and interconnect resources to create the required Boolean functions, registers, and control paths. This makes the CPLD useful for consolidating small amounts of control logic that would otherwise require multiple GAL-type devices, discrete counters, or complex glue logic. Because configuration is nonvolatile, the implemented logic remains available after power is removed and restored, subject to the device’s specified configuration and power behavior.
Typical uses include industrial interface logic, data-acquisition and test systems, communication-control blocks, embedded control systems, and product-interconnect logic. The 64 macro cells are especially useful when several control paths must share registered state, handshake signals, or fixed interface logic. The programmable architecture also supports design revisions because logic functions can be changed without replacing the physical device.
PCB design should preserve the exact pin assignments and power-decoupling requirements defined in the Lattice Semiconductor datasheet and pinout documentation. Place the device-programming interface so it remains accessible during production or field update, route unused inputs to defined levels, and validate timing against the selected 5 ns speed grade and actual operating voltage. Industrial-temperature production designs should also verify the full operating-temperature requirement and sourcing constraints during qualification.
This product page consolidates the device identity, package information, programming characteristics, comparison options, and practical implementation guidance. It is intended to help engineers distinguish speed-grade, temperature-grade, and family-variant differences while planning a board-level replacement without relying on the part number alone.
直接替換替代品,適用於 LC4064B-5T100I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LC4064B-5T100I (相同外形與佔位) — 差異在於 Device Type, Package, Temperature Grade, Product Family.
LC4064B-10T100I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4064B-5T100C
✅ 直接替換聯絡詢價
查看資料表 →LC4064B-75T100I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4064V-5T100I
✅ 直接替換聯絡詢價
查看資料表 →LC4064C-5T100I
✅ 直接替換聯絡詢價
查看資料表 →LC4064B-5T100I 最大額定值與電氣特性
| Device Type | Complex Programmable Logic Device (CPLD) |
| Product Family | ispMACH 4000B |
| Macro Cell Count | 64 macro cells |
| System Speed | 5 ns |
| Architecture | SuperFAST high-density PLD |
| Programmability | In-system programmable |
| Configuration Memory | Nonvolatile |
| Supply Voltage Options | 3.3 V, 2.5 V, or 1.8 V |
| 封裝 | 100-pin TQFP |
| Terminal Count | 100 terminals |
| 安裝類型 | Surface mount |
| Package Shape | Square flatpack |
| Lead Form | Gull wing |
| Temperature Grade | Industrial grade |
LC4064B-5T100I square flatpack 腳位配置指南
LC4064B-5T100I(square flatpack 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: LC4064B-5T100I.
請參閱 資料表 以查看完整腳位配置。
典型應用
LC4064B-5T100I 適用於 6 應用s: Industrial Interface Control, Data-Acquisition Signal Conditioning, Communication Protocol Control, Test and Measurement Systems, Embedded State-Machine Control, Bus Arbitration and Data Routing.
Industrial Interface Control
The LC4064B-5T100I is well suited to industrial interface control because its 64 macro cells can combine address decoding, command validation, handshake sequencing, and fault-latching functions in one programmable device. The 5 ns speed designation supports short combinational and registered control paths, while the industrial “I” suffix supports designs intended for extended temperature environments. A typical implementation places the CPLD between a host processor and peripheral connectors, using dedicated registers to coordinate data-ready, acknowledge, error, and reset signals. The principal design consideration is preserving deterministic timing around asynchronous inputs by synchronizing them and applying explicit timing constraints.
推薦
Data-Acquisition Signal Conditioning
The LC4064B-5T100I can implement the control logic around a multi-channel data-acquisition system, including channel selection, sample sequencing, trigger qualification, and data-valid generation. Its 64 macro cells allow the design to consolidate several small state machines without using separate counters or programmable logic packages. The 5 ns grade provides useful timing margin for registered control paths, while in-system programmability permits field adjustment of channel maps and acquisition sequences. Engineers should check the device’s available I/O count against the converter interface and ensure every trigger or sample-control signal receives the required reset and clock-domain treatment.
推薦
Communication Protocol Control
The LC4064B-5T100I is applicable to communication protocol control where a small amount of deterministic glue logic is needed between a processor and an external transceiver or controller. Its programmable macro cells can implement frame detection, byte counting, parity handling, FIFO control, status flags, and timeout generation. The 5 ns speed rating supports compact registered logic, and the 100-pin TQFP package offers a substantial I/O complement for parallel control paths. The implementation should establish one clocking strategy, constrain all paths to the selected speed grade, and verify that programming pins and configuration signals are accessible if in-system updates are required.
推薦
Test and Measurement Systems
In test and measurement equipment, the LC4064B-5T100I can consolidate trigger routing, instrument sequencing, status decoding, and front-panel control into one programmable logic device. Its 64 macro cells allow multiple related control paths to share registers and internal interconnect resources, reducing component count compared with separate small programmable logic devices. The 5 ns grade is useful when control outputs must respond quickly to latch and capture events, and the industrial suffix broadens its suitability for laboratory and production-test equipment. Designers should budget available I/O carefully because each instrument-facing signal consumes package terminals and may require a dedicated termination or level-shifting arrangement.
推薦
Embedded State-Machine Control
The LC4064B-5T100I is a natural fit for embedded state-machine control that coordinates sensors, actuators, power sequencing, and system modes. Its 64 macro cells can encode several related state transitions and output-valid signals, while the 5 ns grade provides deterministic propagation for fast control loops. Nonvolatile configuration allows the same hardware platform to retain its programmed behavior across power cycles, and in-system programming supports controlled firmware or logic updates. The implementation should define reset behavior for every state, avoid combining unrelated clock domains without synchronization, and use the datasheet timing information to establish worst-case path margins.
推薦
Bus Arbitration and Data Routing
The LC4064B-5T100I can implement bus arbitration, address decoding, request priority, and programmable data-routing functions between processors and peripherals. Its 5 ns speed designation supports deterministic response paths, while the 64 macro cells provide enough density to combine related arbitration and decode functions rather than splitting them across separate devices. A practical design uses registered outputs where timing or fan-out requires them and defines bus ownership during reset to prevent contention. Before schematic capture, engineers should map all bus and request signals to the complete 100-pin package and verify that the chosen I/O structure supports the intended voltage and signaling method.
推薦
推薦產品摘要
工程參考資料,適用於 LC4064B-5T100I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LC4064B-10T100I | LC4064B-5T100C | LC4064B-75T100I | LC4064V-5T100I | LC4064C-5T100I |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 100-pin TQFP | 100-pin TQFP | 100-pin TQFP | 100-pin TQFP | 100-pin TQFP | 100-pin TQFP |
| Speed Designation | 5 ns | 10 ns | 5 ns | 7.5 ns | 5 ns | 5 ns |
| Temperature Suffix | Industrial | Industrial | Commercial | Industrial | Industrial | Industrial |
| Family Suffix | LC4064B | LC4064B | LC4064B | LC4064B | LC4064V | LC4064C |
主要差異化特點
- Faster speed designation than the 10 ns family option (對比LC4064B-10T100I)
- Industrial-temperature ordering option (對比LC4064B-5T100C)
- Closer timing match than the 7.5 ns variant (對比LC4064B-75T100I)
- Original B-family configuration retained (對比LC4064V-5T100I)
設計說明
Use the manufacturer’s 100-pin TQFP land pattern and maintain the documented clearance for all gull-wing leads. Route the programming interface to accessible test points if the product must be programmed or updated after assembly. A short, direct connection between the programmer and device reduces susceptibility to programming-signal degradation and simplifies production validation.
Apply the supply voltage and decoupling configuration specified for the selected operating mode. Place bypass capacitors close to the appropriate power and ground pins, provide a clean return path, and avoid switching-current loops beneath the device. The 5 ns speed designation should be validated against actual clock and I/O timing constraints rather than treated as a guaranteed system-level delay.
Do not approve a substitute solely from the package and macro-cell count. LC4064B speed, LC4064V family, LC4064C family, and commercial-versus-industrial suffixes can change timing, electrical behavior, qualification, or programming requirements. Rebuild the device configuration for the selected MPN and compare the complete datasheet tables, pin definitions, and programming constraints before releasing the PCB.
Assign external clock and asynchronous control inputs deliberately, then constrain the design against the selected 5 ns grade. Synchronize asynchronous request, interrupt, and acknowledgement signals before they enter registered state machines. Keep programming and configuration pins away from noisy switching nodes, and use the package drawing as the authoritative source for pin numbering and exposed thermal-pad requirements.
合規資訊
The manufacturer datasheet and product listings do not state the requested compliance fields in a form that supports a definitive classification.