LC4064C-10T44I - 64-Macro 10ns In-System CPLD | Lattice
Référence : LC4064C-10T44I ✗ Fin de vieLC4064C-10T44I Présentation
A complex programmable logic device, or CPLD, is a programmable semiconductor that combines multiple programmable logic blocks into one integrated device. In the broader hierarchy, a CPLD is a programmable logic device and a semiconductor, sitting between fixed-function logic and larger field-programmable gate arrays. Its principal advantage is nonvolatile configuration retention, allowing a programmed design to operate without a separate configuration controller after power-up.
The LC4064C family combines 64 logic macros with a 10 ns speed designation. The macros can be interconnected to implement control logic, address decoding, state machines, data routing, interface adaptation, and other combinational or sequential functions. Because the configuration is stored in the device, the LC4064C-10T44I is useful where fast startup, deterministic operation, and logic integration are more important than the very large logic capacity of an FPGA.
The device supports 3.3 V, 2.5 V, and 1.8 V supply arrangements, allowing the same programmable logic platform to be used across multiple board-level voltage environments. Its in-system-programmable characteristic supports configuration or reprogramming within the target system rather than requiring removal for separate programming. The 44-pin TQFP package also provides a surface-mount option for designs constrained by board area.
Typical applications include industrial control interfaces, peripheral glue logic, power-management sequencing, communications-interface adaptation, test and measurement control, and embedded system support functions. In these systems, the LC4064C can consolidate fixed logic that would otherwise occupy multiple conventional ICs while preserving a compact, reconfigurable implementation.
Design decisions should focus on timing closure, available I/O, supply selection, and the power and pin requirements of the selected package. The 10 ns speed grade indicates a substantially faster operating target than slower-rated members of the family, but exact setup and hold limits must be taken from the manufacturer datasheet for the selected clock, I/O mode, and voltage configuration.
This product record combines the confirmed 64-macro, 10 ns, 44-TQFP characteristics with package-aware alternatives and practical implementation guidance. It is intended to help engineers determine whether this CPLD fits a specific control or interface design without confusing a genuine pin-compatible replacement with a device that merely serves a similar logic function.
Alternatives de remplacement direct pour LC4064C-10T44I — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec LC4064C-10T44I (même facteur de forme et même empreinte) — différant par Mounting Type, Package, Product Family, Speed Grade.
LC4064C-10TN44I
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
LC4064V-10T44I
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →LC4064C-10T44I Valeurs maximales et caractéristiques électriques
| Product Type | In-system-programmable complex programmable logic device (CPLD) |
| Logic Macro Count | 64 macros |
| Speed Grade | 10 ns |
| Supported Supply Voltages | 3.3 V, 2.5 V, and 1.8 V |
| Boîtier | 44-pin TQFP |
| Configuration Method | In-system programmable |
| Architecture | SuperFAST high-density PLD |
| Device Family | LC4064C |
| Type de montage | Surface mount |
| Statut du cycle de vie | Discontinued |
Guide de configuration des broches du LC4064C-10T44I 44-pin tqfp
Configuration des broches du LC4064C-10T44I (boîtier 44-pin tqfp). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour LC4064C-10T44I.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
LC4064C-10T44I convient pour 6 applications: Industrial Control and Interlocking Logic, Peripheral Interface and Glue Logic, Power Management and Sequencing, Communications Interface Adaptation, Test and Measurement Control Logic, Embedded System Support Logic.
Industrial Control and Interlocking Logic
The LC4064C-10T44I is appropriate for compact industrial control logic where several independent decisions must be combined into a small, deterministic programmable device. Its 64 macros provide a unified implementation for interlocks, sequencing, alarm conditions, and actuator-command logic, while the 10 ns speed grade supports short combinational delays between related control signals. The retained, in-system-programmable configuration is useful during equipment redesign because control behavior can be updated without relocating the device. The 44-pin TQFP package also offers a practical surface-mount option for controller boards with limited area. Before deployment, confirm the exact operating-temperature range, I/O count, voltage arrangement, and timing limits in the manufacturer datasheet.
Recommandé
Peripheral Interface and Glue Logic
The LC4064C-10T44I can consolidate interface adaptation between otherwise dissimilar digital blocks in an embedded system. Its 64 macros are suitable for signal conversion, command multiplexing, address decoding, and status translation, while the 10 ns grade gives designers a defined performance target for short logic paths. The ability to reprogram the device in-system supports configuration updates during product development and maintenance. With support for 3.3 V, 2.5 V, and 1.8 V operation, it can also participate in mixed-voltage logic systems when the selected I/O mode and external interface requirements are verified. The designer should check timing, input thresholds, output drive, and package pin assignments against the exact operating conditions.
Recommandé
Power Management and Sequencing
LC4064C-10T44I can implement deterministic sequencing logic for multi-rail power systems. Instead of using a fixed controller for every rail transition, a designer can use its 64 macros to combine power-good signals, enable requests, fault indications, and timing interlocks into a compact control function. The 10 ns speed designation helps minimize delays between closely related enable and status decisions. In-system programming allows power-sequencing behavior to be revised without changing the PCB when requirements mature. For safety-sensitive sequencing, independent hardware supervision should remain in place even if programmable logic coordinates normal operation. Validate every signal path, supply level, and startup delay against the manufacturer timing and electrical tables before deployment.
Recommandé
Communications Interface Adaptation
The LC4064C-10T44I can bridge protocol and timing differences within communications equipment by implementing framing, command decoding, FIFO control, or interface isolation in programmable logic. The 64-macro capacity allows several small protocol blocks to be combined without occupying a full FPGA, and the 10 ns grade supports short synchronous control paths. Its nonvolatile logic configuration is helpful in systems expected to resume operation immediately after power restoration. For line-rate signal paths, however, the CPLD should provide supervisory and low-speed adaptation rather than be assumed to replace dedicated high-speed transceivers. Verify package pin availability, I/O standards, timing margins, and supply-voltage requirements against the Lattice datasheet.
Recommandé
Test and Measurement Control Logic
LC4064C-10T44I is applicable to legacy test and measurement equipment that requires programmable sequencing, panel control, instrument arbitration, or data-format adaptation. Its 64 macros can consolidate several small control functions into a single 44-pin TQFP device, while the 10 ns grade supports deterministic coordination among measurement, communications, and front-panel subsystems. Retained configuration is beneficial because the instrument can power up without a separate FPGA configuration sequence. The device's supported 1.8 V, 2.5 V, and 3.3 V operating arrangements can simplify integration with different logic domains, but designers must verify the exact electrical limits. For high-speed acquisition or trigger paths, confirm timing closure rather than using the speed-grade label alone.
Recommandé
Embedded System Support Logic
The LC4064C-10T44I can provide fixed-format support logic around a processor, memory, or peripheral subsystem without adding multiple separate logic ICs. Suitable functions include chip-select generation, interrupt arbitration, boot-mode decoding, watchdog enable logic, and crossbar routing. The 64-macro device provides enough integration for moderate designs, while the 10 ns grade targets short propagation delays in synchronous control paths. In-system programmability allows firmware-linked control behavior to be updated during hardware bring-up without replacing the component. Designers should avoid duplicating safety-critical protection solely in the CPLD and should confirm external pull-up or pull-down requirements, unused-pin treatment, and the valid supply configuration for every connected interface.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour LC4064C-10T44I — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | LC4064C-10TN44I | LC4064V-10T44I |
|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 44-pin TQFP | 44-pin TQFP | 44-pin TQFP |
| Speed Grade | 10 ns | 10 ns | 10 ns |
Principaux différenciateurs
- Direct same-family replacement path (vs LC4064C-10TN44I)
- Compact 64-macro implementation (vs ATF22LV10C-10SU)
- Three documented supply-voltage arrangements (vs LC4064V-10T44I)
Notes de conception
Do not treat the LC4064C and LC4064V ordering codes as automatically interchangeable. Although LC4064V-10T44I has the same 10 ns designation and 44-pin TQFP format, verify the supply arrangement, input thresholds, configuration behavior, and every pin assignment against the manufacturer documentation. For a maintenance replacement, LC4064C-10TN44I is the lower-risk same-family candidate because it preserves the LC4064C family and 10 ns configuration.
Assign the PCB footprint from the exact 44-pin TQFP ordering suffix rather than from a generic TQFP symbol. Confirm body size, lead span, pin pitch, exposed-pad treatment, and courtyard dimensions against the package drawing. Keep configuration, clock, and reset traces away from long switching-node or high-current return paths, and provide the decoupling arrangement required by the selected voltage configuration.
Use the manufacturer timing tables to establish setup, hold, propagation-delay, and skew constraints for every path. The 10 ns speed designation does not guarantee a 100 MHz system clock under every I/O or supply condition. Apply the same constraints to the configuration interface, and isolate it from noisy analog or switching circuitry to avoid false programming or unstable configuration behavior.
Because LC4064C-10T44I is discontinued, an existing design should retain controlled replacement inventory and a documented schematic, pin list, and programming-file reference. When procuring legacy units, record the date code, lot information, external marking, storage history, and inspection status. A physically matching chip is not sufficient if its configuration or electrical revision is not identical.
Informations de conformité
The LC4064C family is identified as discontinued. RoHS, REACH, lead-free, halogen-free, conflict-minerals, and exact AEC-Q100 status were not confirmed for this ordering code and remain unknown.