Lattice Semiconductor

LC4064C-10T44I - 64-Macro 10ns In-System CPLD | Lattice

MPN: LC4064C-10T44I ✗ Tapus ng Buhay
3.3 V, 2.5 V, and 1.8 V Vdss 44-pin TQFP Package 10 ns Speed
MOQ: 1 |

LC4064C-10T44I Ulas

Lattice Semiconductor LC4064C-10T44I is a 64-macro, 10 ns in-system-programmable complex programmable logic device packaged in a 44-pin TQFP. It belongs to the SuperFAST high-density PLD family and supports 3.3 V, 2.5 V, and 1.8 V operation, making it suitable for compact control, interface, glue-logic, and system-support functions.

A complex programmable logic device, or CPLD, is a programmable semiconductor that combines multiple programmable logic blocks into one integrated device. In the broader hierarchy, a CPLD is a programmable logic device and a semiconductor, sitting between fixed-function logic and larger field-programmable gate arrays. Its principal advantage is nonvolatile configuration retention, allowing a programmed design to operate without a separate configuration controller after power-up.

The LC4064C family combines 64 logic macros with a 10 ns speed designation. The macros can be interconnected to implement control logic, address decoding, state machines, data routing, interface adaptation, and other combinational or sequential functions. Because the configuration is stored in the device, the LC4064C-10T44I is useful where fast startup, deterministic operation, and logic integration are more important than the very large logic capacity of an FPGA.

The device supports 3.3 V, 2.5 V, and 1.8 V supply arrangements, allowing the same programmable logic platform to be used across multiple board-level voltage environments. Its in-system-programmable characteristic supports configuration or reprogramming within the target system rather than requiring removal for separate programming. The 44-pin TQFP package also provides a surface-mount option for designs constrained by board area.

Typical applications include industrial control interfaces, peripheral glue logic, power-management sequencing, communications-interface adaptation, test and measurement control, and embedded system support functions. In these systems, the LC4064C can consolidate fixed logic that would otherwise occupy multiple conventional ICs while preserving a compact, reconfigurable implementation.

Design decisions should focus on timing closure, available I/O, supply selection, and the power and pin requirements of the selected package. The 10 ns speed grade indicates a substantially faster operating target than slower-rated members of the family, but exact setup and hold limits must be taken from the manufacturer datasheet for the selected clock, I/O mode, and voltage configuration.

This product record combines the confirmed 64-macro, 10 ns, 44-TQFP characteristics with package-aware alternatives and practical implementation guidance. It is intended to help engineers determine whether this CPLD fits a specific control or interface design without confusing a genuine pin-compatible replacement with a device that merely serves a similar logic function.

Mga alternatibo na pwedeng ilagay na LC4064C-10T44I — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok LC4064C-10T44I (parehas na form factor at footprint) — pagkakaiba sa Mounting Type, Package, Product Family, Speed Grade.

Lattice Semiconductor
Product Family: ispMACH 4000B
Ikabit sa LC4064C-10T44I →
Lattice Semiconductor
Mounting Type: SMD/SMT
Package: TQFP-44
Product Family: ispMACH 4000V
Ikabit sa LC4064C-10T44I →

LC4064C-10TN44I

✅ Drop-In
📦 44-pin TQFP
Same LC4064C family, 64 macros, 10 ns grade, 44-pin TQFP format, and in-system-programmable architecture; suffix-level package and marking details require confirmation.

📋 Alternatibo na Reference (hindi sa katalogo)

LC4064V-10T44I

✅ Drop-In
Lattice Semiconductor
📦 44-pin TQFP
Complex Programmable Logic Device (CPLD) · ispMACH 4000V · Blend of ispLSI 2000 and ispMACH 4A architectures · 64 macrocells · 30 I/Os · 3.3 V · 3.3 V / 2.5 V / 1.8 V · 125 MHz

Magkontak para sa presyo

Tingnan ang Datasheet →

LC4064C-10T44I Mga Pinakamataas na Rating at Electrical Characteristics

Product Type In-system-programmable complex programmable logic device (CPLD)
Logic Macro Count 64 macros
Speed Grade 10 ns
Supported Supply Voltages 3.3 V, 2.5 V, and 1.8 V
Packhaging 44-pin TQFP
Configuration Method In-system programmable
Architecture SuperFAST high-density PLD
Device Family LC4064C
Uri ng Pagpapasok Surface mount
Katayuan ng Lifecycle Discontinued

Gabay sa Pin Configuration ng LC4064C-10T44I 44-pin tqfp

Pin configuration para sa LC4064C-10T44I (44-pin tqfp package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 44-pin tqfp package para sa LC4064C-10T44I

Wala ng detalyadong pinout data na magagamit para sa LC4064C-10T44I.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

LC4064C-10T44I ay nararapat para sa 6 aplikasyons: Industrial Control and Interlocking Logic, Peripheral Interface and Glue Logic, Power Management and Sequencing, Communications Interface Adaptation, Test and Measurement Control Logic, Embedded System Support Logic.

🏭

Industrial Control and Interlocking Logic

The LC4064C-10T44I is appropriate for compact industrial control logic where several independent decisions must be combined into a small, deterministic programmable device. Its 64 macros provide a unified implementation for interlocks, sequencing, alarm conditions, and actuator-command logic, while the 10 ns speed grade supports short combinational delays between related control signals. The retained, in-system-programmable configuration is useful during equipment redesign because control behavior can be updated without relocating the device. The 44-pin TQFP package also offers a practical surface-mount option for controller boards with limited area. Before deployment, confirm the exact operating-temperature range, I/O count, voltage arrangement, and timing limits in the manufacturer datasheet.

🔧

Peripheral Interface and Glue Logic

The LC4064C-10T44I can consolidate interface adaptation between otherwise dissimilar digital blocks in an embedded system. Its 64 macros are suitable for signal conversion, command multiplexing, address decoding, and status translation, while the 10 ns grade gives designers a defined performance target for short logic paths. The ability to reprogram the device in-system supports configuration updates during product development and maintenance. With support for 3.3 V, 2.5 V, and 1.8 V operation, it can also participate in mixed-voltage logic systems when the selected I/O mode and external interface requirements are verified. The designer should check timing, input thresholds, output drive, and package pin assignments against the exact operating conditions.

⚡

Power Management and Sequencing

LC4064C-10T44I can implement deterministic sequencing logic for multi-rail power systems. Instead of using a fixed controller for every rail transition, a designer can use its 64 macros to combine power-good signals, enable requests, fault indications, and timing interlocks into a compact control function. The 10 ns speed designation helps minimize delays between closely related enable and status decisions. In-system programming allows power-sequencing behavior to be revised without changing the PCB when requirements mature. For safety-sensitive sequencing, independent hardware supervision should remain in place even if programmable logic coordinates normal operation. Validate every signal path, supply level, and startup delay against the manufacturer timing and electrical tables before deployment.

🌐

Communications Interface Adaptation

The LC4064C-10T44I can bridge protocol and timing differences within communications equipment by implementing framing, command decoding, FIFO control, or interface isolation in programmable logic. The 64-macro capacity allows several small protocol blocks to be combined without occupying a full FPGA, and the 10 ns grade supports short synchronous control paths. Its nonvolatile logic configuration is helpful in systems expected to resume operation immediately after power restoration. For line-rate signal paths, however, the CPLD should provide supervisory and low-speed adaptation rather than be assumed to replace dedicated high-speed transceivers. Verify package pin availability, I/O standards, timing margins, and supply-voltage requirements against the Lattice datasheet.

📺

Test and Measurement Control Logic

LC4064C-10T44I is applicable to legacy test and measurement equipment that requires programmable sequencing, panel control, instrument arbitration, or data-format adaptation. Its 64 macros can consolidate several small control functions into a single 44-pin TQFP device, while the 10 ns grade supports deterministic coordination among measurement, communications, and front-panel subsystems. Retained configuration is beneficial because the instrument can power up without a separate FPGA configuration sequence. The device's supported 1.8 V, 2.5 V, and 3.3 V operating arrangements can simplify integration with different logic domains, but designers must verify the exact electrical limits. For high-speed acquisition or trigger paths, confirm timing closure rather than using the speed-grade label alone.

🖥️

Embedded System Support Logic

The LC4064C-10T44I can provide fixed-format support logic around a processor, memory, or peripheral subsystem without adding multiple separate logic ICs. Suitable functions include chip-select generation, interrupt arbitration, boot-mode decoding, watchdog enable logic, and crossbar routing. The 64-macro device provides enough integration for moderate designs, while the 10 ns grade targets short propagation delays in synchronous control paths. In-system programmability allows firmware-linked control behavior to be updated during hardware bring-up without replacing the component. Designers should avoid duplicating safety-critical protection solely in the CPLD and should confirm external pull-up or pull-down requirements, unused-pin treatment, and the valid supply configuration for every connected interface.

What is the Lattice LC4064C-10T44I?
The LC4064C-10T44I is a discontinued, 64-macro, 10 ns in-system-programmable CPLD from Lattice Semiconductor. According to the manufacturer datasheet information, it is a SuperFAST high-density PLD in a 44-pin TQFP package and supports 3.3 V, 2.5 V, and 1.8 V operation. It is intended for compact logic integration, control functions, interfaces, and other designs requiring retained programmable logic.
What are the key specifications of LC4064C-10T44I that engineers should know?
The LC4064C-10T44I provides 64 logic macros, a 10 ns speed designation, in-system programmability, and a 44-pin TQFP package. The Lattice datasheet description identifies support for 3.3 V, 2.5 V, and 1.8 V operation. These confirmed characteristics place it in the SuperFAST high-density PLD family and make it relevant for deterministic control logic, interface adaptation, and board-level glue logic.
Where can I download the LC4064C-10T44I datasheet PDF?
The LC4064C-10T44I datasheet PDF can be accessed through the Lattice datasheet link listed on this product page. The document describes the LC4064C as a 3.3 V, 2.5 V, and 1.8 V in-system-programmable SuperFAST high-density PLD. Use the manufacturer pin-description table and timing tables when assigning PCB signals and evaluating the 10 ns speed grade.
Where can I find the LC4064C-10T44I pinout?
The LC4064C-10T44I pinout is published in the manufacturer datasheet for the 44-pin TQFP configuration. Use the pin-description table to identify power, ground, configuration, clock, and user I/O assignments for the exact device variant. Do not infer the pinout from a 48-pin LC4064ZE package because TQFP-44 and TQFP-48 are different physical footprints.
Is the LC4064C-10T44I still active?
No. The LC4064C family is identified as discontinued by the manufacturer, and the LC4064C-10T44I should therefore be treated as an obsolete catalog part. Existing designs may retain it for controlled maintenance or replication, while new production designs should evaluate currently supported programmable-logic devices and confirm availability, lifecycle status, and migration requirements.
Where can I buy LC4064C-10T44I online?
Use the Request a Quote form on this page to ask for LC4064C-10T44I availability, minimum order quantity, condition, and delivery terms. Because the device is obsolete and may exist in legacy inventory rather than current authorized production, request written confirmation of traceability, date codes, and storage condition before committing it to a new build.
What is the price of LC4064C-10T44I?
Current commercial terms for LC4064C-10T44I are handled through the Request a Quote form on this page. Because the device is discontinued, its commercial value depends heavily on traceability, stored-life condition, date code, quantity, and whether an original or independently sourced unit is required. The form should be used instead of relying on historical pricing.
What is the lead time for LC4064C-10T44I?
The current lead time for LC4064C-10T44I should be requested through the Request a Quote form on this page. As an obsolete device, its supply interval can vary with available legacy inventory and required traceability. Ask the supplier to confirm the source, date code, inspection status, and estimated delivery window before placing a production order.
Is LC4064C-10T44I in stock?
Stock for LC4064C-10T44I is not represented as a permanent factory-supported inventory guarantee because the device is discontinued. Use the Request a Quote form on this page to request current availability. For an obsolete component, a successful quotation should include quantity, condition, manufacturer traceability, date code, and delivery commitment.
What is the best drop-in replacement for LC4064C-10T44I?
LC4064C-10TN44I is the closest identified same-family drop-in candidate because it retains the LC4064C architecture, 10 ns grade, 64-macro configuration, 44-pin TQFP format, and in-system-programmable feature. Confirm the exact package drawing, pin names, voltage configuration, and programming-file compatibility before substitution. No current cross-brand replacement was verified as fully pin-compatible.
Can LC4064V-10T44I replace LC4064C-10T44I?
LC4064V-10T44I is a close architectural and package match with the same 10 ns designation and 44-pin TQFP format, but it is not a safe automatic replacement without a detailed pin and voltage comparison. The LC4064C is documented as supporting 3.3 V, 2.5 V, and 1.8 V, while the LC4064V variant must be checked for its exact electrical behavior and pin compatibility.
LC4064C-10T44I vs LC4064C-10TN44I: which is better?
LC4064C-10TN44I is preferable for a straightforward footprint-based replacement because it preserves the LC4064C family, 10 ns speed grade, 64-macro configuration, 44-pin TQFP package, and in-system-programmable architecture. The distinguishing suffix details should still be checked in the manufacturer ordering guide, particularly the package drawing and temperature or marking identifiers.
When should I choose LC4064C-10T44I over a larger CPLD?
Choose LC4064C-10T44I when a design needs substantial glue-logic integration but remains within 64 macros and can operate from a supported 1.8 V, 2.5 V, or 3.3 V arrangement. Its 10 ns grade and retained configuration suit deterministic control and interface functions. Move to a larger or newer device when macro count, I/O, performance, memory, or lifecycle requirements exceed this part's limits.
Is LC4064C-10T44I suitable for industrial control applications?
LC4064C-10T44I can be suitable for legacy industrial-control and interface designs when its 64-macro capacity, 10 ns speed grade, supported supply voltages, and retained configuration meet the system requirements. The manufacturer datasheet should be consulted for the exact operating-temperature rating and automotive qualification status before use in temperature-extreme or safety-critical equipment.
What can replace LC4064C-10T44I in a legacy design?
The closest identified replacement is LC4064C-10TN44I, which preserves the 10 ns LC4064C configuration and 44-pin TQFP format. LC4064V-10T44I is also structurally close but requires additional voltage and pin-function review. For new designs, compare current programmable-logic devices rather than assuming that a similar macro count is sufficient for timing, I/O, software, and lifecycle requirements.

Impormasyon ng Talumpati sa Engineering for LC4064C-10T44I — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose LC4064C-10T44I for an existing design that requires a discontinued 64-macro, 10 ns CPLD in a 44-pin TQFP and can accept lifecycle constraints. LC4064C-10TN44I is the preferred candidate for maintenance procurement because it preserves the same LC4064C family, speed grade, macro count, package format, and in-system-programmable architecture; nevertheless, verify package drawings, temperature markings, and programming compatibility. LC4064V-10T44I is structurally close because it also carries a 10 ns designation and 44-pin TQFP format, but it should be selected only after its voltage arrangement and pin functions are shown to match the board. For new designs, use the LC4064C only where 64 macros are sufficient; otherwise choose a currently supported device with adequate I/O, timing margin, memory, software support, and lifecycle longevity.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto LC4064C-10TN44I LC4064V-10T44I
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Package 44-pin TQFP 44-pin TQFP 44-pin TQFP
Speed Grade 10 ns 10 ns 10 ns

Pangunahing mga Pagkakaiba

  • Direct same-family replacement path (kumpara saLC4064C-10TN44I)
  • Compact 64-macro implementation (kumpara saATF22LV10C-10SU)
  • Three documented supply-voltage arrangements (kumpara saLC4064V-10T44I)

Talaan ng Disenyo

Do not treat the LC4064C and LC4064V ordering codes as automatically interchangeable. Although LC4064V-10T44I has the same 10 ns designation and 44-pin TQFP format, verify the supply arrangement, input thresholds, configuration behavior, and every pin assignment against the manufacturer documentation. For a maintenance replacement, LC4064C-10TN44I is the lower-risk same-family candidate because it preserves the LC4064C family and 10 ns configuration.

Assign the PCB footprint from the exact 44-pin TQFP ordering suffix rather than from a generic TQFP symbol. Confirm body size, lead span, pin pitch, exposed-pad treatment, and courtyard dimensions against the package drawing. Keep configuration, clock, and reset traces away from long switching-node or high-current return paths, and provide the decoupling arrangement required by the selected voltage configuration.

Use the manufacturer timing tables to establish setup, hold, propagation-delay, and skew constraints for every path. The 10 ns speed designation does not guarantee a 100 MHz system clock under every I/O or supply condition. Apply the same constraints to the configuration interface, and isolate it from noisy analog or switching circuitry to avoid false programming or unstable configuration behavior.

Because LC4064C-10T44I is discontinued, an existing design should retain controlled replacement inventory and a documented schematic, pin list, and programming-file reference. When procuring legacy units, record the date code, lot information, external marking, storage history, and inspection status. A physically matching chip is not sufficient if its configuration or electrical revision is not identical.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The LC4064C family is identified as discontinued. RoHS, REACH, lead-free, halogen-free, conflict-minerals, and exact AEC-Q100 status were not confirmed for this ordering code and remain unknown.

Data napatotohanan sa: 2026-11-14 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

LC4064C-10T44I datasheet LC4064C-10T44I pinout LC4064C-10T44I datasheet pdf LC4064C-10T44I equivalent LC4064C-10T44I replacement LC4064C-10T44I cross reference LC4064C-10T44I price LC4064C-10T44I stock LC4064C-10T44I vs LC4064C-10TN44I LC4064C 44 TQFP pinout LC4064C 10 ns CPLD Lattice LC4064C-10T44I LC4064C-10T44I footprint LC4064C-10T44I application circuit

Mga kaugnay na Mga Komponente at mga Tuntunin

Lattice Semiconductor LC4064C-10T44I LC4064C-10TN44I LC4064V-10T44I LC4064C LC4064V CPLD complex programmable logic device programmable logic device PLD SuperFAST high-density PLD in-system programming logic macro 64 macros 10 ns speed grade 44-pin TQFP TQFP package family surface-mount semiconductor 3.3 V 2.5 V 1.8 V industrial control peripheral interface power sequencing RoHS REACH AEC-Q100
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ