Lattice Semiconductor

LC4064C-75T48C - 400MHz 48-TQFP CPLD | Lattice Semiconductor

Référence : LC4064C-75T48C ✗ Fin de vie
1.8 V, 2.5 V, or 3.3 V Vdss 48-pin TQFP Package 400 MHz Speed
MOQ : 1 |

LC4064C-75T48C Présentation

The Lattice Semiconductor LC4064C-75T48C is an in-system programmable Complex Programmable Logic Device in the ispMACH 4000C family, with a maximum operating frequency of 400 MHz, a 2.5 ns propagation delay, and a 48-pin TQFP package. It combines programmable logic, global clock distribution, and in-system programmability for compact control, interface, and signal-processing designs.

A CPLD, or Complex Programmable Logic Device, is a programmable-logic semiconductor positioned between simple PAL/GAL devices and FPGAs. The LC4064C belongs to the broader hierarchy of programmable logic -> complex programmable logic device -> ispMACH family. Unlike a fixed-function logic circuit, it allows board designers to implement combinational and registered logic that can be revised through an in-system programming interface.

The LC4064C-75T48C supports 3.3 V, 2.5 V, and 1.8 V operation according to its device description. Its 400 MHz maximum operating frequency and 2.5 ns propagation delay make it suitable for fast control paths, interface conditioning, protocol conversion, and state-machine logic. The device also provides up to four global clock pins with programmable clock polarity, helping distribute a common clock while supporting both rising- and falling-edge designs.

The 48-pin TQFP package provides a conventional surface-mount footprint suitable for automated assembly and moderate I/O density. A surface-mount package reduces board height compared with many leaded logic packages, while its exposed perimeter leads support inspection and rework. The -75 suffix identifies the device speed grade, and the 48C portion identifies the package configuration used in the orderable MPN.

Typical applications include industrial control, data acquisition, communication-interface bridging, test equipment, embedded system control, and general-purpose glue logic. The in-system programming capability is especially useful when a design must be updated after assembly or when multiple boards require the same programmable logic configuration.

Designers should verify the complete pin description, power rails, and programming interface in the manufacturer datasheet before laying out a PCB. Input and output timing should be evaluated at the intended operating frequency, and unused pins should follow the datasheet's power, ground, or no-connect requirements. The maximum frequency is a device capability rather than a guarantee for every logic design.

Alternatives de remplacement direct pour LC4064C-75T48C — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec LC4064C-75T48C (même facteur de forme et même empreinte) — différant par Device Type, Package, Logic Family, Product Family, Propagation Delay.

Lattice Semiconductor
Device Type: Complex programmable logic device (CPLD)
Package: 48-pin TQFP
Comparer avec LC4064C-75T48C →
Lattice Semiconductor
Logic Family: Super Fast High Density PLD
Comparer avec LC4064C-75T48C →
Lattice Semiconductor
Device Type: SuperFAST complex programmable logic device (CPLD)
Package: 48-pin TQFP, 1 mm height
Logic Family: CMOS
Comparer avec LC4064C-75T48C →

LC4064C-25T48C

✅ Remplacement direct
Lattice Semiconductor
📦 48-pin TQFP
Complex Programmable Logic Device (CPLD) · ispMACH 4000C SuperFAST High Density PLD · 64 macrocells · 32 I/O pins · 2.5 ns · -25 · 48-TQFP, 7 x 7 mm · Surface mount

Contactez-nous pour le prix

Voir la fiche technique →

LC4064V-75TN48C

✅ Remplacement direct
📦 48-pin TQFP
Retains a -75 speed designation but uses the LC4064V family and TN package code; family-specific supply, timing, and pin differences require verification.

📋 Alternative de référence (hors catalogue)

LC4064ZC-75T48C

✅ Remplacement direct
📦 48-pin TQFP
Retains the -75 speed designation and 48-pin configuration but changes the family suffix from C to ZC; verify voltage and programming compatibility.

📋 Alternative de référence (hors catalogue)

LC4064ZE-7TN48I

✅ Remplacement direct
📦 48-pin TQFP
Retains a 48-pin configuration but changes the family suffix and uses a -7 speed designation rather than -75; timing and device functionality differ.

📋 Alternative de référence (hors catalogue)

LC4064V-75T48E

✅ Remplacement direct
Lattice Semiconductor
📦 48-pin TQFP
SuperFAST complex programmable logic device (CPLD) · ispMACH 4000V family · 64 macrocells · 30 I/O pins · 7.5 ns · 168 MHz · 111 MHz · 3.3 V, 2.5 V, or 1.8 V

Contactez-nous pour le prix

Voir la fiche technique →

LC4064C-75T48C Valeurs maximales et caractéristiques électriques

Device Type Complex Programmable Logic Device (CPLD)
Product Family ispMACH 4000C
Maximum Operating Frequency 400 MHz
Propagation Delay 2.5 ns
Supply Voltage Options 1.8 V, 2.5 V, or 3.3 V
Programming Method In-System Programmable
Global Clock Pins Up to 4
Clock Polarity Control Programmable
Product Technology EECMOS
Boîtier 48-pin TQFP
Type de montage Surface Mount
Device Temperature Grade Commercial
Statut du cycle de vie Discontinued

Guide de configuration des broches du LC4064C-75T48C 48-pin tqfp

Configuration des broches du LC4064C-75T48C (boîtier 48-pin tqfp). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 48-pin tqfp pour le LC4064C-75T48C

Aucune donnée de brochage détaillée disponible pour LC4064C-75T48C.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

LC4064C-75T48C convient pour 6 applications: Industrial Control and Automation, Data Acquisition and Signal Conditioning, Communication Interface Bridging, Embedded System Glue Logic, Test and Measurement Equipment, Network and Communication Equipment.

🏭

Industrial Control and Automation

The LC4064C-75T48C fits compact industrial control logic where sequencing, interlocks, and machine-state decisions must be reprogrammable without changing the PCB. Its 400 MHz maximum operating frequency and 2.5 ns propagation delay provide timing margin for registered control paths, while four global clock inputs support coordinated machine-control domains. In-system programmability allows controlled revisions after assembly or during maintenance. The design should use the manufacturer pin-description table to separate programming, clock, control, and I/O signals, and verify the device's temperature rating for the target enclosure and ambient conditions.

📊

Data Acquisition and Signal Conditioning

The LC4064C-75T48C can implement acquisition sequencing, sample-control signals, input qualification, and data-format conversion around external converters. Its 400 MHz maximum operating frequency is suitable for fast digital coordination, while programmable global clock polarity helps align capture and transfer logic. The 48-pin TQFP footprint also keeps the design compatible with established surface-mount assembly methods. Designers should budget timing margin for converter and routing delays, use the clock resources deliberately, and verify all I/O constraints against the device's electrical-characteristics tables before fixing the system clock frequency.

🌐

Communication Interface Bridging

The LC4064C-75T48C is applicable to protocol conversion and interface bridging when legacy and newer signaling schemes must be translated through programmable logic. Its 400 MHz capability supports registered datapaths, while four global clocks can serve separate transmit, receive, or byte-strobe domains. In-system programming allows protocol logic to be revised during qualification or field maintenance. A practical implementation should constrain each interface through timing analysis, account for clock-domain crossings, and use the manufacturer's programming and pin tables to establish a safe boot configuration before external devices begin communicating.

🔧

Embedded System Glue Logic

The LC4064C-75T48C can consolidate address decoding, arbitration, watchdog control, interrupt routing, and peripheral interconnect logic into a single programmable device. Its 2.5 ns propagation delay supports fast registered decisions, and in-system programmability reduces the number of board revisions required when an interface changes. The 48-pin TQFP package provides a practical surface-mount option for compact embedded controllers. Designers should use the global clocks only where required, isolate asynchronous inputs with suitable synchronizers, and validate every unused pin against the manufacturer's recommended configuration.

📡

Test and Measurement Equipment

The LC4064C-75T48C can implement instrument-control sequencing, trigger routing, counter logic, and acquisition-format conversion in compact test equipment. A maximum operating frequency of 400 MHz supports fast timing control, and programmable clock polarity enables rising- or falling-edge triggers without redesigning external routing. The surface-mount 48-pin TQFP package is suitable for automated production assembly. For metrology equipment, engineers should evaluate input thresholds, output timing, clock jitter, and grounding separately because the maximum frequency alone does not determine measurement accuracy.

🌐

Network and Communication Equipment

The LC4064C-75T48C is suited to legacy-network interface logic, status aggregation, alarm encoding, and control-plane sequencing in communication equipment. Its programmable architecture allows several small interface functions to be consolidated, while the 400 MHz maximum operating frequency supports registered transfers. Four global clock pins can organize related logic around a common cadence, subject to the design's actual timing requirements. The device should be selected only after checking its legacy lifecycle status, operating-temperature limits, and availability of an appropriate long-term supply arrangement for the production program.

What is the LC4064C-75T48C?
The LC4064C-75T48C is a discontinued Lattice Semiconductor ispMACH 4000C-family CPLD with in-system programmability, a 400 MHz maximum operating frequency, and a 48-pin TQFP package. According to the Lattice Semiconductor device description, it supports 3.3 V, 2.5 V, and 1.8 V operation and provides up to four global clock pins with programmable polarity. It is used for compact logic control, interfacing, and state-machine implementations where a programmable device offers more flexibility than fixed-function logic.
What is the maximum operating frequency of the LC4064C-75T48C?
The LC4064C-75T48C has a maximum operating frequency of 400 MHz, with a stated propagation delay of 2.5 ns. These values describe the capability of the -75 speed grade rather than the guaranteed clock rate of every compiled logic design. According to the Lattice Semiconductor datasheet description, actual timing must be evaluated against the selected clock, I/O path, registered logic, and worst-case system conditions before the device is used as a timing-critical clock target.
Where can I download the LC4064C-75T48C datasheet PDF?
The LC4064C-75T48C datasheet can be accessed through the Octopart datasheet page listed for this exact MPN. The document identifies the device as a 3.3 V, 2.5 V, and 1.8 V in-system programmable SuperFAST high-density PLD. Use the manufacturer pin-description table, electrical-characteristics tables, and programming instructions when assigning PCB nets or evaluating the 400 MHz maximum operating frequency.
Where can I find the LC4064C-75T48C pinout?
The complete numbered LC4064C-75T48C pinout must be taken from the pin-description table in the Lattice Semiconductor datasheet. The device uses a 48-pin TQFP package, but the supplied search results do not expose each numbered signal name. Accordingly, no individual pin assignments are reproduced here. Confirm the pinout, supply pins, ground pins, programming pins, and unused-pin requirements against the manufacturer document before creating a PCB footprint or assigning signals.
Is the LC4064C-75T48C still active?
No, the LC4064C-75T48C is discontinued. The LC4064C family replacement listing identifies the family as discontinued by the manufacturer and notes that no current Lattice device provides the same logic capacity in a direct drop-in form. For a new design, evaluate the listed family alternatives for architecture changes or select a current programmable-logic platform rather than treating the original part as an active production choice.
What can replace the LC4064C-75T48C?
The closest supported replacements are other 48-pin members of the LC4064 family, but the exact choice depends on the required speed grade, voltage configuration, device revision, and pin behavior. LC4064C-25T48C uses a slower -25 grade, while LC4064V-75TN48C, LC4064ZC-75T48C, and LC4064ZE-7TN48I differ in family or suffix characteristics. Verify the complete datasheet and PCB compatibility before replacing the obsolete device.
Is LC4064C-75T48C the same as LC4064V-75TN48C?
No, the LC4064C-75T48C and LC4064V-75TN48C are related family members, not identical orderable parts. Both appear in 48-pin logic-device listings and carry a -75 speed designation, but the C versus V family identifier and the N package code can represent different device details. According to the available comparison information, the products differ in family characteristics. Confirm supply voltage, programming behavior, timing, and every pin assignment before substitution.
LC4064C-75T48C vs LC4064C-25T48C: which is better for a high-speed design?
The LC4064C-75T48C is the better choice when a design needs the faster -75 speed grade. The LC4064C-25T48C is a slower -25 grade, so its timing margin is lower under the same clock and path conditions. The LC4064C-75T48C is rated for a 400 MHz maximum operating frequency with a 2.5 ns propagation delay, making it preferable when timing closure is more important than preserving an older -25-specific bill of materials.
When should I choose the LC4064C-75T48C over a slower family member?
Choose the LC4064C-75T48C when the design requires the -75 timing grade, particularly for fast state machines, registered control paths, or interfaces operating near the device's stated capability. Its 400 MHz maximum frequency and 2.5 ns propagation delay provide more timing margin than the -25 option. For a new design, first confirm whether an obsolete CPLD is appropriate; otherwise, use the part for legacy maintenance rather than as the default architecture for a new platform.
Is the LC4064C-75T48C suitable for industrial control applications?
The LC4064C-75T48C is functionally suitable for programmable industrial control logic because it offers in-system programmability, 400 MHz maximum operating frequency, and as many as four global clock inputs. Suitability for a particular industrial product also depends on its operating-temperature rating, longevity program, and qualification requirements. Those details are not stated in the supplied listings, so verify them in the manufacturer datasheet and current Lattice lifecycle documentation before releasing an industrial design.
Does the LC4064C-75T48C support in-system programming?
Yes, the LC4064C-75T48C is an in-system programmable SuperFAST high-density PLD. In-system programming allows a configured logic design to be loaded or revised through the device programming interface after board assembly or during a controlled upgrade procedure. The programming voltage, signal timing, isolation requirements, and supported programmer or cable must be checked in the manufacturer datasheet because those operating details are not stated in the product listings.
How many global clock pins does the LC4064C-75T48C have?
The LC4064C-75T48C provides up to four global clock pins with programmable clock polarity control. Global clock resources allow a common clock to be distributed across multiple logic paths, while polarity programming lets a design use either edge of that clock. According to the Lattice Semiconductor device description, this feature supports high-speed, multi-clock logic designs where simple local routing would otherwise make clock distribution and timing more difficult.
Where can I buy the LC4064C-75T48C?
Use the Request a Quote form on this page to request the obsolete Lattice Semiconductor LC4064C-75T48C, current stock, traceability information, and the required package quantity. Because the LC4064C family is discontinued, availability can vary by lot and condition. Provide the exact MPN, target quantity, acceptable date codes, and inspection requirements so sourcing can confirm the most suitable remaining inventory.
What is the lead time for the LC4064C-75T48C?
The lead time for the LC4064C-75T48C must be confirmed through the Request a Quote form on this page. The device is a discontinued, catalog-style part, so lead time depends on remaining lot inventory, date-code availability, packaging quantity, and inspection requirements rather than a standard production schedule. Request a written quotation that states the confirmed quantity, sourcing condition, and current delivery estimate.
Is the LC4064C-75T48C in stock?
Current stock for the LC4064C-75T48C must be confirmed through the Request a Quote form on this page. Search listings establish that the exact MPN is cataloged, but they do not state a live stock quantity. For an obsolete device, ask for the available lot, date code, country of origin, traceability documents, and inspection status so the remaining inventory can be matched to the assembly schedule.

Données de référence d'ingénierie pour LC4064C-75T48C — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the LC4064C-75T48C when maintaining an existing LC4064C-based design that depends on its -75 timing grade, 400 MHz maximum operating frequency, and established 48-pin TQFP layout. The LC4064C-25T48C is appropriate only when the required logic can operate in the slower -25 grade or when it exactly matches an existing qualified BOM. Consider LC4064V-75TN48C, LC4064ZC-75T48C, LC4064V-75T48E, and LC4064ZE-7TN48I only after comparing their voltage, timing, programming, and pin assignments with the installed device. Because the LC4064C family is discontinued, new products should normally use a current programmable-logic architecture unless maintaining the legacy design is mandatory and the replacement qualification is complete.

Comparaison avec les alternatives

Paramètre Ce produit LC4064C-25T48C LC4064V-75TN48C LC4064ZC-75T48C LC4064ZE-7TN48I LC4064V-75T48E
Package 48-pin TQFP 48-pin TQFP 48-pin TQFP 48-pin TQFP 48-pin TQFP 48-pin TQFP
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Device Type CPLD CPLD CPLD CPLD CPLD CPLD
Product Family LC4064C LC4064C LC4064V LC4064ZC LC4064ZE LC4064V
Speed Designation -75 -25 -75 -75 -7 -75

Principaux différenciateurs

  • Faster -75 timing grade than the -25 family option (vs LC4064C-25T48C)
  • Direct member of the named LC4064C family (vs LC4064V-75TN48C)
  • Commercial-grade C-family ordering (vs LC4064ZE-7TN48I)

Notes de conception

Use the manufacturer land pattern for the 48-pin TQFP and verify it against the selected solder-assembly process. Preserve the device's documented ground and supply-pin arrangement, route programming signals to accessible test points, and avoid long parallel programming traces where noise could affect configuration reliability. Because the LC4064C family is obsolete, document every PCB-side assumption so the board can be serviced with an independently verified replacement.

Treat the stated 400 MHz maximum operating frequency and 2.5 ns propagation delay as device-level limits rather than a guaranteed system result. Check external I/O timing, clock skew, routing delay, and the logic-depth assigned to each path. Use the programmable global clock polarity feature only after confirming which edge each registered path requires; incorrect edge assignment can create hold-time failures even when the nominal clock frequency appears acceptable.

Do not substitute the LC4064C-25, LC4064V, LC4064ZC, or LC4064ZE variants solely because the package and speed suffix appear similar. Compare the complete pin tables, supply rails, in-system-programming behavior, timing characteristics, and power-up requirements for the exact suffix. A same-package candidate is suitable only after those functional differences have been resolved.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The commercial LC4064C-75T48C is not an automotive-qualified variant, but explicit RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements are not included in the product listings. A comparative listing mentions RoHS and REACH for related family members, but it is not sufficient to assign those statuses to the exact MPN.

Données vérifiées le : 2026-11-15 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

LC4064C-75T48C datasheet LC4064C-75T48C pinout LC4064C-75T48C datasheet pdf LC4064C-75T48C equivalent LC4064C-75T48C replacement LC4064C-75T48C cross reference LC4064C-75T48C vs LC4064C-25T48C LC4064C-75T48C price LC4064C-75T48C stock Lattice LC4064C-75T48C LC4064C-75T48C footprint LC4064C-75T48C application circuit

Composants & termes associés

Lattice Semiconductor LC4064C-75T48C LC4064C-25T48C LC4064V-75TN48C LC4064ZC-75T48C LC4064ZE-7TN48I LC4064V-75T48E CPLD Complex Programmable Logic Device ispMACH 4000C programmable logic in-system programming EECMOS 400 MHz 2.5 ns propagation delay TQFP-48 TQFP family surface mount global clock programmable clock polarity industrial control data acquisition communication interface test and measurement equipment
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ