LC4064C-75T48C - 400MHz 48-TQFP CPLD | Lattice Semiconductor
Артикул: LC4064C-75T48C ✗ Снят с производстваLC4064C-75T48C Обзор
A CPLD, or Complex Programmable Logic Device, is a programmable-logic semiconductor positioned between simple PAL/GAL devices and FPGAs. The LC4064C belongs to the broader hierarchy of programmable logic -> complex programmable logic device -> ispMACH family. Unlike a fixed-function logic circuit, it allows board designers to implement combinational and registered logic that can be revised through an in-system programming interface.
The LC4064C-75T48C supports 3.3 V, 2.5 V, and 1.8 V operation according to its device description. Its 400 MHz maximum operating frequency and 2.5 ns propagation delay make it suitable for fast control paths, interface conditioning, protocol conversion, and state-machine logic. The device also provides up to four global clock pins with programmable clock polarity, helping distribute a common clock while supporting both rising- and falling-edge designs.
The 48-pin TQFP package provides a conventional surface-mount footprint suitable for automated assembly and moderate I/O density. A surface-mount package reduces board height compared with many leaded logic packages, while its exposed perimeter leads support inspection and rework. The -75 suffix identifies the device speed grade, and the 48C portion identifies the package configuration used in the orderable MPN.
Typical applications include industrial control, data acquisition, communication-interface bridging, test equipment, embedded system control, and general-purpose glue logic. The in-system programming capability is especially useful when a design must be updated after assembly or when multiple boards require the same programmable logic configuration.
Designers should verify the complete pin description, power rails, and programming interface in the manufacturer datasheet before laying out a PCB. Input and output timing should be evaluated at the intended operating frequency, and unused pins should follow the datasheet's power, ground, or no-connect requirements. The maximum frequency is a device capability rather than a guarantee for every logic design.
Аналоги без доработки для LC4064C-75T48C — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с LC4064C-75T48C (тот же форм-фактор и посадочное место) — отличается по Device Type, Package, Logic Family, Product Family, Propagation Delay.
LC4064C-25T48C
✅ Прямая заменаУточнить цену
Открыть даташит →LC4064V-75TN48C
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
LC4064ZC-75T48C
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
LC4064ZE-7TN48I
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
LC4064V-75T48E
✅ Прямая заменаУточнить цену
Открыть даташит →LC4064C-75T48C Максимальные параметры и электрические характеристики
| Device Type | Complex Programmable Logic Device (CPLD) |
| Product Family | ispMACH 4000C |
| Maximum Operating Frequency | 400 MHz |
| Propagation Delay | 2.5 ns |
| Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| Programming Method | In-System Programmable |
| Global Clock Pins | Up to 4 |
| Clock Polarity Control | Programmable |
| Product Technology | EECMOS |
| Корпус | 48-pin TQFP |
| Тип монтажа | Surface Mount |
| Device Temperature Grade | Commercial |
| Статус жизненного цикла | Discontinued |
Руководство по цоколевке LC4064C-75T48C в корпусе 48-pin tqfp
Цоколевка для LC4064C-75T48C (корпус 48-pin tqfp). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для LC4064C-75T48C.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
LC4064C-75T48C подходит для 6 применениеs: Industrial Control and Automation, Data Acquisition and Signal Conditioning, Communication Interface Bridging, Embedded System Glue Logic, Test and Measurement Equipment, Network and Communication Equipment.
Industrial Control and Automation
The LC4064C-75T48C fits compact industrial control logic where sequencing, interlocks, and machine-state decisions must be reprogrammable without changing the PCB. Its 400 MHz maximum operating frequency and 2.5 ns propagation delay provide timing margin for registered control paths, while four global clock inputs support coordinated machine-control domains. In-system programmability allows controlled revisions after assembly or during maintenance. The design should use the manufacturer pin-description table to separate programming, clock, control, and I/O signals, and verify the device's temperature rating for the target enclosure and ambient conditions.
Рекомендуется
Data Acquisition and Signal Conditioning
The LC4064C-75T48C can implement acquisition sequencing, sample-control signals, input qualification, and data-format conversion around external converters. Its 400 MHz maximum operating frequency is suitable for fast digital coordination, while programmable global clock polarity helps align capture and transfer logic. The 48-pin TQFP footprint also keeps the design compatible with established surface-mount assembly methods. Designers should budget timing margin for converter and routing delays, use the clock resources deliberately, and verify all I/O constraints against the device's electrical-characteristics tables before fixing the system clock frequency.
Рекомендуется
Communication Interface Bridging
The LC4064C-75T48C is applicable to protocol conversion and interface bridging when legacy and newer signaling schemes must be translated through programmable logic. Its 400 MHz capability supports registered datapaths, while four global clocks can serve separate transmit, receive, or byte-strobe domains. In-system programming allows protocol logic to be revised during qualification or field maintenance. A practical implementation should constrain each interface through timing analysis, account for clock-domain crossings, and use the manufacturer's programming and pin tables to establish a safe boot configuration before external devices begin communicating.
Рекомендуется
Embedded System Glue Logic
The LC4064C-75T48C can consolidate address decoding, arbitration, watchdog control, interrupt routing, and peripheral interconnect logic into a single programmable device. Its 2.5 ns propagation delay supports fast registered decisions, and in-system programmability reduces the number of board revisions required when an interface changes. The 48-pin TQFP package provides a practical surface-mount option for compact embedded controllers. Designers should use the global clocks only where required, isolate asynchronous inputs with suitable synchronizers, and validate every unused pin against the manufacturer's recommended configuration.
Рекомендуется
Test and Measurement Equipment
The LC4064C-75T48C can implement instrument-control sequencing, trigger routing, counter logic, and acquisition-format conversion in compact test equipment. A maximum operating frequency of 400 MHz supports fast timing control, and programmable clock polarity enables rising- or falling-edge triggers without redesigning external routing. The surface-mount 48-pin TQFP package is suitable for automated production assembly. For metrology equipment, engineers should evaluate input thresholds, output timing, clock jitter, and grounding separately because the maximum frequency alone does not determine measurement accuracy.
Рекомендуется
Network and Communication Equipment
The LC4064C-75T48C is suited to legacy-network interface logic, status aggregation, alarm encoding, and control-plane sequencing in communication equipment. Its programmable architecture allows several small interface functions to be consolidated, while the 400 MHz maximum operating frequency supports registered transfers. Four global clock pins can organize related logic around a common cadence, subject to the design's actual timing requirements. The device should be selected only after checking its legacy lifecycle status, operating-temperature limits, and availability of an appropriate long-term supply arrangement for the production program.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для LC4064C-75T48C — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | LC4064C-25T48C | LC4064V-75TN48C | LC4064ZC-75T48C | LC4064ZE-7TN48I | LC4064V-75T48E |
|---|---|---|---|---|---|---|
| Package | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Device Type | CPLD | CPLD | CPLD | CPLD | CPLD | CPLD |
| Product Family | LC4064C | LC4064C | LC4064V | LC4064ZC | LC4064ZE | LC4064V |
| Speed Designation | -75 | -25 | -75 | -75 | -7 | -75 |
Ключевые отличия
- Faster -75 timing grade than the -25 family option (против LC4064C-25T48C)
- Direct member of the named LC4064C family (против LC4064V-75TN48C)
- Commercial-grade C-family ordering (против LC4064ZE-7TN48I)
Заметки по проектированию
Use the manufacturer land pattern for the 48-pin TQFP and verify it against the selected solder-assembly process. Preserve the device's documented ground and supply-pin arrangement, route programming signals to accessible test points, and avoid long parallel programming traces where noise could affect configuration reliability. Because the LC4064C family is obsolete, document every PCB-side assumption so the board can be serviced with an independently verified replacement.
Treat the stated 400 MHz maximum operating frequency and 2.5 ns propagation delay as device-level limits rather than a guaranteed system result. Check external I/O timing, clock skew, routing delay, and the logic-depth assigned to each path. Use the programmable global clock polarity feature only after confirming which edge each registered path requires; incorrect edge assignment can create hold-time failures even when the nominal clock frequency appears acceptable.
Do not substitute the LC4064C-25, LC4064V, LC4064ZC, or LC4064ZE variants solely because the package and speed suffix appear similar. Compare the complete pin tables, supply rails, in-system-programming behavior, timing characteristics, and power-up requirements for the exact suffix. A same-package candidate is suitable only after those functional differences have been resolved.
Информация о соответствии
The commercial LC4064C-75T48C is not an automotive-qualified variant, but explicit RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements are not included in the product listings. A comparative listing mentions RoHS and REACH for related family members, but it is not sufficient to assign those statuses to the exact MPN.