Lattice Semiconductor

LC4064V-5T100C - 3.3V 64-I/O SuperFAST CPLD | Lattice

Référence : LC4064V-5T100C ✓ Actif
3.3 V Vdss 100-pin TQFP, 14 mm x 14 mm Package 5 ns grade Speed
MOQ : 1 |

LC4064V-5T100C Présentation

The Lattice Semiconductor LC4064V-5T100C is a 3.3 V, 64-I/O complex programmable logic device in a 100-pin TQFP package. It belongs to the SuperFAST high-density PLD family and supports in-system programming for 3.3 V, 2.5 V, and 1.8 V supply configurations. The device is designed to consolidate multiple PAL and GAL-style logic functions into one programmable device while preserving the familiar deterministic behavior expected by control and interface designs.

A complex programmable logic device, or CPLD, is a user-programmable semiconductor that sits between fixed-function logic and a field-programmable gate array. Its architecture provides a defined logic structure, predictable timing, and nonvolatile configuration retention. The LC4064V-5T100C offers 64 programmable I/O pins, making it useful where a design requires substantially more external glue logic than a small classic PLD can provide.

Key device characteristics include a 3.3 V operating rail, a 3.0 V to 3.6 V internal supply range, and a commercial junction-temperature range from 0 °C to 90 °C. Its 100-pin TQFP package measures 14 mm by 14 mm and provides adequate routing density for buses, counters, state machines, address decoding, interface control, and general-purpose combinational or sequential logic. In-system programming allows a design to be updated without removing the device from the assembled board.

The SuperFAST architecture targets high-density designs requiring more logic capacity and faster propagation performance than conventional low-density PLDs. Because configuration is stored in nonvolatile memory, the LC4064V-5T100C starts with its programmed logic immediately after power is applied and does not require an external configuration loader. This simplifies board design compared with SRAM-based programmable logic that depends on a host processor or dedicated configuration source.

Typical applications include industrial control and automation, instrumentation, peripheral controllers, legacy bus-interface consolidation, test and measurement equipment, and embedded system support logic. It can also serve as a companion controller beside microcontrollers, FPGAs, or memory devices when several fixed timing-critical functions must be implemented independently.

When designing a PCB around this device, reserve all 100 package positions for signal routing even though only 64 I/O functions are specified, and follow the manufacturer's pin-description table for power, ground, configuration, and dedicated-function assignments. Confirm the intended voltage configuration, decoupling requirements, and unused-pin treatment against the manufacturer datasheet before releasing the layout.

This page combines the device's core electrical and packaging characteristics with a practical comparison against pin-compatible Lattice SuperFAST options, application guidance, and PCB-focused design notes. These resources help engineers identify meaningful differences in speed grade, voltage support, and temperature grade without treating package compatibility as proof of functional interchangeability.

Alternatives de remplacement direct pour LC4064V-5T100C — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec LC4064V-5T100C (même facteur de forme et même empreinte) — différant par Package, Speed Grade.

Lattice Semiconductor
Package: 100-pin TQFP
Speed Grade: -5 nominal 5 ns grade
Comparer avec LC4064V-5T100C →

LC4064V-5TN100C

✅ Remplacement direct
📦 100-pin TQFP
Same SuperFAST 64-I/O family and 100-pin package class; ordering suffix differs, so temperature and packaging conditions require confirmation

📋 Alternative de référence (hors catalogue)

LC4064C-5T100C

✅ Remplacement direct
Lattice Semiconductor
📦 100-pin TQFP
SuperFAST high-density complex programmable logic device · LC4064C · In-system programmable · 3.3 V, 2.5 V, and 1.8 V · -5 nominal 5 ns grade

Contactez-nous pour le prix

Voir la fiche technique →

LC4064B-5T100C

✅ Remplacement direct
Lattice Semiconductor
📦 100-pin TQFP
Complex Programmable Logic Device (CPLD) · ispMACH 4000B · 64 macrocells · 64 I/O pins · 5 ns · 227 MHz · 2.3 V to 2.7 V · In-system programmable

Contactez-nous pour le prix

Voir la fiche technique →

LC4064V-75TN100E

✅ Remplacement direct
📦 100-pin TQFP
Same V-series 64-I/O 100-pin platform; 7.5 ns speed designation is 50 percent slower in numeric timing grade than the 5 ns target

📋 Alternative de référence (hors catalogue)

LC4064V-75T100-10I

✅ Remplacement direct
📦 100-pin TQFP
Same V-series 100-pin SuperFAST family; 7.5 ns speed grade is 50 percent slower numerically, with a different temperature or grade suffix

📋 Alternative de référence (hors catalogue)

LC4064V-5T100C Valeurs maximales et caractéristiques électriques

Device Type SuperFAST high-density complex programmable logic device
Tension d'alimentation 3.3 V
Internal Supply Range 3.0 V to 3.6 V
Programmable I/O Count 64 I/O
Supported Supply Configurations 3.3 V, 2.5 V, and 1.8 V
Programming Method In-system programmable
Speed Grade 5 ns grade
Boîtier 100-pin TQFP, 14 mm x 14 mm
Type de montage Surface mount
Junction Temperature Range 0 °C to 90 °C
Logic Family SuperFAST high-density PLD
Configuration Type Nonvolatile programmable logic
Datasheet Length 74 pages
Manufacturer Lattice Semiconductor Corporation

Guide de configuration des broches du LC4064V-5T100C 100-pin tqfp, 14 mm x 14 mm

Configuration des broches du LC4064V-5T100C (boîtier 100-pin tqfp, 14 mm x 14 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 100-pin tqfp, 14 mm x 14 mm pour le LC4064V-5T100C

Aucune donnée de brochage détaillée disponible pour LC4064V-5T100C.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

LC4064V-5T100C convient pour 6 applications: Industrial Automation Control, Legacy Bus Interface Consolidation, Test and Measurement Instrumentation, Peripheral Controller Consolidation, Data Acquisition Signal Conditioning, Embedded System Support Logic.

🏭

Industrial Automation Control

The LC4064V-5T100C fits industrial machine-control logic where multiple discrete PAL and GAL devices would otherwise be required. Its 64 programmable I/Os can support limit-switch inputs, solenoid-output sequencing, interlocks, counters, and status decoding within one deterministic CPLD. The 3.0 V to 3.6 V internal supply range and 0 °C to 90 °C junction rating align with many 3.3 V control boards, while nonvolatile configuration allows the controller to operate immediately after power-up without a separate configuration sequence.

🖥️

Legacy Bus Interface Consolidation

The LC4064V-5T100C is useful for consolidating several legacy bus transceivers, address decoders, and handshake controllers into one programmable device. Its 64 I/Os provide enough parallel lanes to manage chip-select generation, read and write strobes, interrupt arbitration, and peripheral address decoding. The SuperFAST high-density architecture is appropriate when several PAL-style functions must operate with predictable logic behavior, while in-system programming supports board-level logic updates and production test optimization.

🔧

Test and Measurement Instrumentation

In instrumentation equipment, the LC4064V-5T100C can implement timing-critical sequencing, trigger logic, range selection, and front-panel control without loading a main processor. Its 64 I/Os support multiple instrument buses, status indicators, and control outputs, while the 100-pin TQFP package provides enough routing density for moderate interconnect complexity. The device's programmable, nonvolatile architecture is especially helpful for prototype instruments where measurement sequencing changes frequently and field updates are expected.

🧩

Peripheral Controller Consolidation

The LC4064V-5T100C can consolidate several discrete interface controllers into a single package, including printer-port logic, storage-control sequencing, DMA-request generation, and interrupt-control logic. With 64 programmable I/Os, it fits designs that exceed small GAL capacity but do not require an FPGA. Its 3.3 V operation and in-system programming make it useful for revision-friendly embedded platforms where changing peripheral behavior without respinning the entire board would reduce development time.

📊

Data Acquisition Signal Conditioning

The LC4064V-5T100C can coordinate multiplexers, sample-and-hold control, range relays, channel counters, and acquisition triggers in a modular data-acquisition system. Its 64 I/Os allow many control signals to be generated from a single timing-consistent state machine, reducing the number of discrete PAL devices. The 3.3 V supply range matches modern converter and interface logic, and the programmable configuration allows channel timing and trigger definitions to be revised as acquisition requirements evolve.

⚙️

Embedded System Support Logic

The LC4064V-5T100C is effective as a support controller beside a microcontroller, memory, or FPGA when several fixed functions must be offloaded. Typical assignments include boot-sequence control, watchdog handling, reset distribution, interrupt prioritization, power-good sequencing, and peripheral chip enables. The device's nonvolatile configuration starts operating without an external configuration loader, while its 64 I/Os provide a wide interface surface for connecting the deterministic logic block to the rest of an embedded system.

What is the LC4064V-5T100C?
The LC4064V-5T100C is a Lattice Semiconductor SuperFAST high-density complex programmable logic device with 64 programmable I/O pins, a 3.3 V supply, and in-system programming. According to the manufacturer datasheet, it supports 3.3 V, 2.5 V, and 1.8 V supply configurations. The device is packaged in a 100-pin TQFP measuring 14 mm by 14 mm and is intended for designs that need deterministic programmable logic with nonvolatile configuration.
How many I/O pins does the LC4064V-5T100C have?
The LC4064V-5T100C has 64 programmable I/O pins. These I/Os can be assigned as inputs, outputs, or bidirectional paths through the CPLD configuration, allowing a single package to implement multiple bus interfaces, counters, decoders, and control functions. The manufacturer datasheet identifies the device as a 100-pin TQFP package, so PCB land patterns must include all 100 package positions even though the user-programmable I/O count is 64.
What is the operating voltage of the LC4064V-5T100C?
The LC4064V-5T100C operates from a 3.3 V nominal supply, with an internal supply range of 3.0 V to 3.6 V. The manufacturer datasheet also identifies 2.5 V and 1.8 V as supported supply configurations for this in-system-programmable SuperFAST device family. Use the pin-description and power-supply sections in the datasheet to determine the correct configuration for the voltage levels and interface standards present on the target board.
Where can I download the LC4064V-5T100C datasheet PDF?
The LC4064V-5T100C datasheet is available from the Lattice Semiconductor documentation archive and from the linked 74-page PDF record. The document contains the device description, pin assignments, electrical characteristics, timing information, configuration details, and package drawings. Download the manufacturer PDF and use its pin-description table and recommended power circuitry when assigning board tracks and selecting decoupling capacitors.
Where is the LC4064V-5T100C pinout located?
The LC4064V-5T100C pinout is documented in the pin-description and package-outline sections of the manufacturer datasheet. This page does not reproduce the complete pin map, so use the official pin table when assigning tracks to the 100-pin TQFP footprint. Pay particular attention to power, ground, configuration, clock, and dedicated-function pins before finalizing the PCB layout.
What are the key specifications of LC4064V-5T100C that engineers should know?
The LC4064V-5T100C combines 64 programmable I/Os with a 3.3 V nominal supply and a 3.0 V to 3.6 V internal range. It is a SuperFAST high-density CPLD with in-system programming for 3.3 V, 2.5 V, and 1.8 V configurations. The manufacturer datasheet also specifies a commercial junction-temperature range of 0 °C to 90 °C and a 100-pin, 14 mm by 14 mm TQFP package.
Can the LC4064V-5T100C be programmed after installation?
Yes, the LC4064V-5T100C supports in-system programming, allowing its programmable logic configuration to be updated on the assembled circuit board. The manufacturer identifies the device as a 3.3 V, 2.5 V, and 1.8 V in-system-programmable SuperFAST high-density PLD. Follow the datasheet programming and configuration procedures when adding test points or defining the production programming sequence.
Is LC4064V-5T100C the same as LC4064V-5TN100C?
The LC4064V-5T100C and LC4064V-5TN100C are closely related Lattice SuperFAST CPLD variants, but their orderable suffixes can denote different packaging or qualification conditions. Both are associated with 64-I/O devices and 100-pin packages, yet an exact replacement should be confirmed against the manufacturer ordering guide. Check speed grade, temperature grade, package form, and configuration compatibility before approving a substitution.
What is the difference between LC4064V-5T100C and LC4064C-5T100C?
Both parts are Lattice SuperFAST high-density 64-I/O CPLDs associated with the 100-pin TQFP family, and the LC4064C-5T100C appears in the manufacturer datasheet set. The V and C device designations represent distinct device variants with potentially different internal organization or specification tables. Use the LC4064V-5T100C manufacturer datasheet and the corresponding LC4064C datasheet to compare logic resources, timing, supply options, and pin-level functions.
When should I choose the LC4064V-5T100C over a smaller GAL device?
Choose the LC4064V-5T100C when the design needs more than 64 programmable I/Os, multiple logic blocks, or consolidation of several classic GAL and PAL functions. The device provides substantially greater routing and logic capacity in a single 100-pin TQFP while retaining deterministic CPLD timing and nonvolatile configuration. A smaller GAL remains preferable when only a few simple equations are needed and board area or cost dominates.
Is the LC4064V-5T100C suitable for industrial control equipment?
The LC4064V-5T100C is suitable for many commercial-temperature industrial control designs operating with a junction temperature from 0 °C to 90 °C. Its 64 I/Os and in-system programmability support state machines, interface logic, counters, and industrial bus glue. For installations with wider ambient temperatures, direct motor heating, or extended environmental exposure, confirm system temperature margins and consider a device with an extended temperature grade.
What is the best drop-in replacement for the LC4064V-5T100C?
The closest candidates include LC4064V-5TN100C, LC4064C-5T100C, and LC4064B-5T100C because they are associated with the same Lattice SuperFAST 100-pin family and comparable 64-I/O configurations. A true drop-in replacement still requires verification of package form, pin functions, logic resources, speed grade, temperature grade, and voltage support. Program and test the replacement design before production release.
What Lattice Semiconductor equivalent can replace the LC4064V-5T100C?
LC4064V-5TN100C is the most direct same-manufacturer candidate for the LC4064V-5T100C because both are 64-I/O SuperFAST variants offered in the 100-pin package family. The ordering suffix determines conditions such as temperature grade or package treatment, so compatibility must be confirmed in the Lattice ordering information. Verify every assigned pin against both datasheets rather than relying on the shared family name.
How do I decide between LC4064V-5T100C and LC4064V-75T100-10I?
The LC4064V-5T100C is associated with a 5 ns speed designation, while LC4064V-75T100-10I carries a 7.5 ns designation and a different orderable suffix. Both are Lattice 100-pin SuperFAST-family devices, but timing class and grade conditions can differ by roughly 50 percent in the numeric speed designation. Choose according to the required system timing and confirm pin, temperature, and supply compatibility in the datasheets.
Where can I buy the LC4064V-5T100C and check its lead time?
Use the Request a Quote form on this page to request the LC4064V-5T100C, current commercial terms, and a lot-specific lead-time confirmation. The form lets the purchasing team specify quantity, target packaging, and inspection requirements without relying on a static availability statement. Because production planning depends on lot and market conditions, obtain the current confirmation directly rather than treating a distributor listing as a guaranteed inventory promise.
How should the LC4064V-5T100C PCB layout be implemented?
Route the LC4064V-5T100C using the manufacturer datasheet pin-description table and the 100-pin TQFP land pattern, then place the recommended bypass capacitors close to their power pins. Keep the 14 mm by 14 mm device free of high-current or noisy routing where practical. Account for clock, configuration, and dedicated-function pins separately from the 64 programmable I/Os, and treat unused pins according to the explicit datasheet instructions.

Données de référence d'ingénierie pour LC4064V-5T100C — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the LC4064V-5T100C when a design needs a 64-I/O, 3.3 V SuperFAST CPLD in a 100-pin TQFP and must retain the specified 5 ns speed designation and in-system supply flexibility. LC4064V-5TN100C is a sensible same-family candidate when its ordering suffix matches the required temperature, qualification, or packaging conditions. LC4064C-5T100C and LC4064B-5T100C may suit designs whose logic-resource mapping and timing tables are compatible, but they are different device variants rather than automatic substitutions. The 7.5 ns LC4064V-75TN100E and LC4064V-75T100-10I are appropriate only when the slower timing grade still satisfies every setup and hold requirement and their grade suffixes match the product specification. For designs with only a few simple equations, a smaller GAL or CPLD remains more economical; for very high I/O counts or large registered datapaths, move up to an XC2C or higher-density programmable logic family.

Comparaison avec les alternatives

Paramètre Ce produit LC4064V-5TN100C LC4064C-5T100C LC4064B-5T100C LC4064V-75TN100E LC4064V-75T100-10I
Package 100-pin TQFP, 14 mm x 14 mm 100-pin TQFP 100-pin TQFP 100-pin TQFP 100-pin TQFP 100-pin TQFP
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Device Type SuperFAST high-density CPLD SuperFAST high-density CPLD SuperFAST high-density CPLD SuperFAST high-density CPLD SuperFAST high-density CPLD SuperFAST high-density CPLD
Speed Designation 5 ns grade 5 ns grade 5 ns grade 5 ns grade 7.5 ns grade 7.5 ns grade
Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V

Principaux différenciateurs

  • Direct V-series family match with a 5 ns speed designation (vs LC4064V-5TN100C)
  • Higher timing grade than the 7.5 ns family options (vs LC4064V-75TN100E)
  • Broad in-system supply configuration support (vs LC4064B-5T100C)
  • Consolidates high-density control logic in 64 I/Os (vs ATF16V8CZ-15XC)

Notes de conception

Assign PCB tracks from the manufacturer pin-description table rather than treating every one of the 100 package positions as a user I/O. The device has 64 programmable I/Os, while power, ground, configuration, clock, and dedicated functions occupy additional positions. Place the recommended input and output bypass capacitors directly beside their corresponding pins, keep the route between the capacitors and the package as short as practical, and use the datasheet land pattern for the 14 mm by 14 mm TQFP.

Do not approve a replacement solely because it uses a 100-pin TQFP. Verify the device family, I/O mapping, dedicated pin functions, configuration method, supply configuration, speed grade, and temperature grade against the original design. In particular, the 7.5 ns alternatives have a 50 percent slower numeric timing designation than the 5 ns target, which may break a critical path even though the footprints appear interchangeable.

Keep clock, configuration, and high-fanout control nets away from switching-node or high-current return paths on mixed-signal boards. Use a continuous ground plane where practical, avoid routing over plane splits, and terminate external signals according to the actual edge rate rather than only the clock frequency. Because the LC4064V-5T100C is intended for deterministic control logic, marginal return-path discontinuities can manifest as intermittent setup or hold-time failures.

Check the complete in-system programming flow before committing the board. The LC4064V-5T100C can be programmed after installation, but the programmer interface, programming voltage, configuration pins, and mode control still require correct board-level implementation. Provide the access and routing required by the manufacturer procedure and include a test point or connector that does not disturb the programmed I/O assignments.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The 0 °C to 90 °C junction-temperature rating identifies a commercial temperature grade rather than an automotive qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or the applicable certification documentation.

Recherches associées

lc4064v datasheet LC4064V-5T100C datasheet LC4064V-5T100C pinout LC4064V-5T100C 100 TQFP LC4064V-5T100C equivalent LC4064V-5T100C replacement LC4064V-5T100C cross reference LC4064V-5T100C price LC4064V-5T100C stock Lattice LC4064V-5T100C LC4064V-5T100C vs LC4064V-5TN100C LC4064V-5T100C vs LC4064C-5T100C LC4064V-5T100C vs LC4064V-75TN100E LC4064V-5T100C industrial control logic LC4064V-5T100C in-system programming

Composants & termes associés

Lattice Semiconductor LC4064V-5T100C LC4064V-5TN100C LC4064C-5T100C LC4064B-5T100C LC4064V-75TN100E LC4064V-75T100-10I complex programmable logic device CPLD SuperFAST high-density PLD programmable logic in-system programmable nonvolatile configuration 64 I/O 3.3 V 2.5 V 1.8 V 100-pin TQFP surface-mount package industrial automation data acquisition test and measurement legacy bus interface embedded system control
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ