LC4064V-5T100C - 3.3V 64-I/O SuperFAST CPLD | Lattice
MPN: LC4064V-5T100C ✓ AktifLC4064V-5T100C Genel Bakış
A complex programmable logic device, or CPLD, is a user-programmable semiconductor that sits between fixed-function logic and a field-programmable gate array. Its architecture provides a defined logic structure, predictable timing, and nonvolatile configuration retention. The LC4064V-5T100C offers 64 programmable I/O pins, making it useful where a design requires substantially more external glue logic than a small classic PLD can provide.
Key device characteristics include a 3.3 V operating rail, a 3.0 V to 3.6 V internal supply range, and a commercial junction-temperature range from 0 °C to 90 °C. Its 100-pin TQFP package measures 14 mm by 14 mm and provides adequate routing density for buses, counters, state machines, address decoding, interface control, and general-purpose combinational or sequential logic. In-system programming allows a design to be updated without removing the device from the assembled board.
The SuperFAST architecture targets high-density designs requiring more logic capacity and faster propagation performance than conventional low-density PLDs. Because configuration is stored in nonvolatile memory, the LC4064V-5T100C starts with its programmed logic immediately after power is applied and does not require an external configuration loader. This simplifies board design compared with SRAM-based programmable logic that depends on a host processor or dedicated configuration source.
Typical applications include industrial control and automation, instrumentation, peripheral controllers, legacy bus-interface consolidation, test and measurement equipment, and embedded system support logic. It can also serve as a companion controller beside microcontrollers, FPGAs, or memory devices when several fixed timing-critical functions must be implemented independently.
When designing a PCB around this device, reserve all 100 package positions for signal routing even though only 64 I/O functions are specified, and follow the manufacturer's pin-description table for power, ground, configuration, and dedicated-function assignments. Confirm the intended voltage configuration, decoupling requirements, and unused-pin treatment against the manufacturer datasheet before releasing the layout.
This page combines the device's core electrical and packaging characteristics with a practical comparison against pin-compatible Lattice SuperFAST options, application guidance, and PCB-focused design notes. These resources help engineers identify meaningful differences in speed grade, voltage support, and temperature grade without treating package compatibility as proof of functional interchangeability.
Drop-in alternatifler için LC4064V-5T100C — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller LC4064V-5T100C (aynı form faktörü ve ayağa oturma) — farklı olan Package, Speed Grade.
LC4064V-5TN100C
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
LC4064C-5T100C
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →LC4064B-5T100C
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →LC4064V-75TN100E
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
LC4064V-75T100-10I
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
LC4064V-5T100C Maksimum Değerlendirmeler & Elektriksel Özellikler
| Device Type | SuperFAST high-density complex programmable logic device |
| Besleme Gerilimi | 3.3 V |
| Internal Supply Range | 3.0 V to 3.6 V |
| Programmable I/O Count | 64 I/O |
| Supported Supply Configurations | 3.3 V, 2.5 V, and 1.8 V |
| Programming Method | In-system programmable |
| Speed Grade | 5 ns grade |
| Paket | 100-pin TQFP, 14 mm x 14 mm |
| Montaj Türü | Surface mount |
| Junction Temperature Range | 0 °C to 90 °C |
| Logic Family | SuperFAST high-density PLD |
| Configuration Type | Nonvolatile programmable logic |
| Datasheet Length | 74 pages |
| Manufacturer | Lattice Semiconductor Corporation |
LC4064V-5T100C 100-pin tqfp, 14 mm x 14 mm Pin Yapısı Kılavuzu
LC4064V-5T100C (100-pin tqfp, 14 mm x 14 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: LC4064V-5T100C.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
LC4064V-5T100C için uygundur 6 uygulamas: Industrial Automation Control, Legacy Bus Interface Consolidation, Test and Measurement Instrumentation, Peripheral Controller Consolidation, Data Acquisition Signal Conditioning, Embedded System Support Logic.
Industrial Automation Control
The LC4064V-5T100C fits industrial machine-control logic where multiple discrete PAL and GAL devices would otherwise be required. Its 64 programmable I/Os can support limit-switch inputs, solenoid-output sequencing, interlocks, counters, and status decoding within one deterministic CPLD. The 3.0 V to 3.6 V internal supply range and 0 °C to 90 °C junction rating align with many 3.3 V control boards, while nonvolatile configuration allows the controller to operate immediately after power-up without a separate configuration sequence.
Önerilen
Legacy Bus Interface Consolidation
The LC4064V-5T100C is useful for consolidating several legacy bus transceivers, address decoders, and handshake controllers into one programmable device. Its 64 I/Os provide enough parallel lanes to manage chip-select generation, read and write strobes, interrupt arbitration, and peripheral address decoding. The SuperFAST high-density architecture is appropriate when several PAL-style functions must operate with predictable logic behavior, while in-system programming supports board-level logic updates and production test optimization.
Önerilen
Test and Measurement Instrumentation
In instrumentation equipment, the LC4064V-5T100C can implement timing-critical sequencing, trigger logic, range selection, and front-panel control without loading a main processor. Its 64 I/Os support multiple instrument buses, status indicators, and control outputs, while the 100-pin TQFP package provides enough routing density for moderate interconnect complexity. The device's programmable, nonvolatile architecture is especially helpful for prototype instruments where measurement sequencing changes frequently and field updates are expected.
Önerilen
Peripheral Controller Consolidation
The LC4064V-5T100C can consolidate several discrete interface controllers into a single package, including printer-port logic, storage-control sequencing, DMA-request generation, and interrupt-control logic. With 64 programmable I/Os, it fits designs that exceed small GAL capacity but do not require an FPGA. Its 3.3 V operation and in-system programming make it useful for revision-friendly embedded platforms where changing peripheral behavior without respinning the entire board would reduce development time.
Önerilen
Data Acquisition Signal Conditioning
The LC4064V-5T100C can coordinate multiplexers, sample-and-hold control, range relays, channel counters, and acquisition triggers in a modular data-acquisition system. Its 64 I/Os allow many control signals to be generated from a single timing-consistent state machine, reducing the number of discrete PAL devices. The 3.3 V supply range matches modern converter and interface logic, and the programmable configuration allows channel timing and trigger definitions to be revised as acquisition requirements evolve.
Önerilen
Embedded System Support Logic
The LC4064V-5T100C is effective as a support controller beside a microcontroller, memory, or FPGA when several fixed functions must be offloaded. Typical assignments include boot-sequence control, watchdog handling, reset distribution, interrupt prioritization, power-good sequencing, and peripheral chip enables. The device's nonvolatile configuration starts operating without an external configuration loader, while its 64 I/Os provide a wide interface surface for connecting the deterministic logic block to the rest of an embedded system.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: LC4064V-5T100C — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | LC4064V-5TN100C | LC4064C-5T100C | LC4064B-5T100C | LC4064V-75TN100E | LC4064V-75T100-10I |
|---|---|---|---|---|---|---|
| Package | 100-pin TQFP, 14 mm x 14 mm | 100-pin TQFP | 100-pin TQFP | 100-pin TQFP | 100-pin TQFP | 100-pin TQFP |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Device Type | SuperFAST high-density CPLD | SuperFAST high-density CPLD | SuperFAST high-density CPLD | SuperFAST high-density CPLD | SuperFAST high-density CPLD | SuperFAST high-density CPLD |
| Speed Designation | 5 ns grade | 5 ns grade | 5 ns grade | 5 ns grade | 7.5 ns grade | 7.5 ns grade |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
Ana Farklılayıcılar
- Direct V-series family match with a 5 ns speed designation (karşılaştırma:LC4064V-5TN100C)
- Higher timing grade than the 7.5 ns family options (karşılaştırma:LC4064V-75TN100E)
- Broad in-system supply configuration support (karşılaştırma:LC4064B-5T100C)
- Consolidates high-density control logic in 64 I/Os (karşılaştırma:ATF16V8CZ-15XC)
Tasarım Notları
Assign PCB tracks from the manufacturer pin-description table rather than treating every one of the 100 package positions as a user I/O. The device has 64 programmable I/Os, while power, ground, configuration, clock, and dedicated functions occupy additional positions. Place the recommended input and output bypass capacitors directly beside their corresponding pins, keep the route between the capacitors and the package as short as practical, and use the datasheet land pattern for the 14 mm by 14 mm TQFP.
Do not approve a replacement solely because it uses a 100-pin TQFP. Verify the device family, I/O mapping, dedicated pin functions, configuration method, supply configuration, speed grade, and temperature grade against the original design. In particular, the 7.5 ns alternatives have a 50 percent slower numeric timing designation than the 5 ns target, which may break a critical path even though the footprints appear interchangeable.
Keep clock, configuration, and high-fanout control nets away from switching-node or high-current return paths on mixed-signal boards. Use a continuous ground plane where practical, avoid routing over plane splits, and terminate external signals according to the actual edge rate rather than only the clock frequency. Because the LC4064V-5T100C is intended for deterministic control logic, marginal return-path discontinuities can manifest as intermittent setup or hold-time failures.
Check the complete in-system programming flow before committing the board. The LC4064V-5T100C can be programmed after installation, but the programmer interface, programming voltage, configuration pins, and mode control still require correct board-level implementation. Provide the access and routing required by the manufacturer procedure and include a test point or connector that does not disturb the programmed I/O assignments.
Uyumluluk Bilgisi
The 0 °C to 90 °C junction-temperature rating identifies a commercial temperature grade rather than an automotive qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or the applicable certification documentation.