Lattice Semiconductor

LC4064V-75T48C - 64-Macrocell 7.5 ns CPLD | Lattice

Référence : LC4064V-75T48C ✓ Actif
3.0 V to 3.6 V Vdss 48-pin TQFP Package
MOQ : 1 |

LC4064V-75T48C Présentation

The Lattice Semiconductor LC4064V-75T48C is an in-system-programmable complex programmable logic device with 64 macrocells, a maximum propagation delay of 7.5 ns, and 32 user I/O pins. It is supplied in a 48-pin TQFP package measuring 7 mm by 7 mm. The device belongs to the ispMACH 4000V family, a high-density PLD architecture combining in-system programmability with support for 1.8 V, 2.5 V, and 3.3 V system levels.

A complex programmable logic device, or CPLD, is a user-programmable semiconductor that implements fixed logic functions through configurable internal macrocell and interconnect resources. Its position in the product hierarchy is CPLD → programmable logic device → programmable logic IC → semiconductor. Compared with an FPGA, a CPLD generally offers deterministic nonvolatile configuration and straightforward timing behavior, making it useful for control logic, interface conditioning, bus arbitration, and compact glue-logic designs.

The LC4064V provides 64 macrocells, four logic elements, and 32 user I/O pins. Its 7.5 ns maximum propagation-delay designation supports high-speed control paths, while the in-system-programmable architecture allows the finished board to be configured or updated without removing the device. The 48-TQFP surface-mount package also offers a practical pin count for boards requiring both external interfaces and internal control logic.

This device uses the ispMACH 4000V architecture, which Lattice describes as a blend of the ispLSI 2000 and ispMACH 4A architectures. The architecture is intended for designs requiring predictable logic implementation and migration among density devices that share a package pinout. Although the 400 MHz figure associated with a related family member may be used to characterize the product family, individual signal timing should be evaluated from the complete device timing tables rather than inferred from that frequency alone.

Typical uses include peripheral-interface bridging, data-format conversion, industrial control logic, communications sequencing, test-interface multiplexing, and general-purpose glue logic. The 32 available user I/O pins make the device appropriate for designs combining multiple bus interfaces or discrete control signals. Because the logic is nonvolatile and programmable, it is particularly useful where deterministic boot behavior and field reconfiguration are valuable.

PCB design should preserve the manufacturer's recommended power, ground, clock, and programming-signal arrangements. Decoupling capacitors should be placed close to the supply pins, programming access should remain unobstructed, and unused inputs should be handled according to the device's stated configuration rules. Signal-routing choices should also account for package escape delays and the external timing budget of each connected peripheral.

This product page combines the device's 64-macrocell architecture, 7.5 ns timing designation, 32 user I/O availability, 48-TQFP footprint, family-level alternatives, and practical migration considerations. It also highlights the distinction between an exact MPN replacement and a functionally similar family member whose operating-temperature or supply-level details still require engineering review.

Alternatives de remplacement direct pour LC4064V-75T48C — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec LC4064V-75T48C (même facteur de forme et même empreinte) — différant par Device Type, Package, Maximum Propagation Delay.

Lattice Semiconductor
Device Type: Complex programmable logic device (CPLD)
Maximum Propagation Delay: 2.5 ns
Comparer avec LC4064V-75T48C →
Lattice Semiconductor
Device Type: SuperFAST complex programmable logic device (CPLD)
Package: 48-pin TQFP, 1 mm height
Comparer avec LC4064V-75T48C →

LC4064V-75TN48C

✅ Remplacement direct
📦 48-TQFP
Maximum propagation delay remains 7.5 ns and the 48-TQFP footprint is unchanged; grade-specific temperature or suffix characteristics require confirmation.

📋 Alternative de référence (hors catalogue)

LC4064V-75T48E

✅ Remplacement direct
Lattice Semiconductor
📦 48-TQFP
SuperFAST complex programmable logic device (CPLD) · ispMACH 4000V family · 64 macrocells · 30 I/O pins · 7.5 ns · 168 MHz · 111 MHz · 3.3 V, 2.5 V, or 1.8 V

Contactez-nous pour le prix

Voir la fiche technique →

LC4064ZC-75T48C

✅ Remplacement direct
📦 48-TQFP
Shares the 48-pin ispMACH family footprint and 7.5 ns timing designation; voltage and temperature-code differences remain orderable-code checks.

📋 Alternative de référence (hors catalogue)

LC4064C-75T48C

✅ Remplacement direct
Lattice Semiconductor
📦 48-TQFP
Complex Programmable Logic Device (CPLD) · ispMACH 4000C · 400 MHz · 2.5 ns · 1.8 V, 2.5 V, or 3.3 V · In-System Programmable · Up to 4 · Programmable

Contactez-nous pour le prix

Voir la fiche technique →

LC4064V-75TN48I

✅ Remplacement direct
📦 48-TQFP
Retains the 48-TQFP ispMACH 4000V footprint and 7.5 ns timing class; industrial-grade ordering characteristics require confirmation.

📋 Alternative de référence (hors catalogue)

LC4064V-75T48C Valeurs maximales et caractéristiques électriques

Device Type In-system-programmable CPLD
Series ispMACH 4000V
Macrocell Count 64 macrocells
Logic Elements 4 logic elements
Maximum Propagation Delay 7.5 ns
User I/O Pin Count 32 user I/O pins
Supply Voltage Range 3.0 V to 3.6 V
Supported I/O Voltage Levels 1.8 V, 2.5 V, and 3.3 V
Programming Method In-system programmable
Boîtier 48-pin TQFP
Package Dimensions 7 mm x 7 mm
Type de montage Surface mount
Logic Density 64 macrocells

Guide de configuration des broches du LC4064V-75T48C 7 mm x 7 mm

Configuration des broches du LC4064V-75T48C (boîtier 7 mm x 7 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 7 mm x 7 mm pour le LC4064V-75T48C

Aucune donnée de brochage détaillée disponible pour LC4064V-75T48C.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

LC4064V-75T48C convient pour 6 applications: Industrial Control Logic, Peripheral Interface Bridging, Communications Sequencing, Test and Measurement Systems, Data Acquisition Front Ends, Embedded System Glue Logic.

🏭

Industrial Control Logic

The LC4064V-75T48C is suitable for industrial control blocks that combine sequencing, interlocks, and peripheral control within one programmable device. Its 64 macrocells provide substantially more logic capacity than a small PAL while retaining the deterministic behavior associated with CPLD architecture. The 32 user I/O pins provide connections for sensors, actuators, status indicators, and interlocks, while the 7.5 ns maximum propagation-delay designation supports short control paths. Designers should still verify temperature-grade requirements and timing margins for the specific controller enclosure and supply conditions.

🔧

Peripheral Interface Bridging

The LC4064V-75T48C can bridge dissimilar peripheral interfaces by translating bus timing, encoding signals, and generating control strobes. Its 32 user I/O pins allow parallel data, address, and handshake signals to be combined on one programmable device, and 64 macrocells provide room for protocol conversion logic beyond simple level translation. The 7.5 ns timing designation is useful when interfacing with moderately fast parallel devices. Engineers should evaluate setup and hold requirements, I/O voltage compatibility, and the complete external-device timing before releasing the interface layout.

🌐

Communications Sequencing

LC4064V-75T48C implementations can perform communications framing, command sequencing, and data-format conversion between parallel and serial functional blocks. The device's 64 macrocells support more elaborate state-machine and arbitration logic than compact legacy PLDs, and its in-system programmability allows configuration during board test or field update procedures. With 32 user I/O pins, the part can accommodate control signals and parallel data without immediately requiring a larger package. Signal-integrity work should focus on clock routing, return paths, programmable-pin assignment, and the timing budget across each communications link.

🔧

Test and Measurement Systems

The LC4064V-75T48C can implement measurement-system control, pattern sequencing, channel multiplexing, and trigger routing where deterministic programmable behavior is valuable. Its 32 user I/O pins are suitable for coordinating multiple instruments or switching networks, while 64 macrocells accommodate timing and state-management logic. The 7.5 ns maximum propagation-delay designation can assist with fast digital-control paths, although analog measurement accuracy and instrument timing remain dependent on external circuitry. Validate every programmed function against the manufacturer timing model and the instrument's own control requirements.

📊

Data Acquisition Front Ends

LC4064V-75T48C can coordinate multiplexers, sample controls, trigger logic, and data-acquisition sequencing in a compact control design. The 64-macrocell architecture supports more elaborate acquisition state machines than basic fuse-programmed alternatives, while 32 user I/O pins provide practical connectivity for control and status lines. Its specified 3.0 V to 3.6 V supply range must be reconciled with the surrounding analog and digital voltage domains. Keep sensitive analog paths separate from switching logic and follow the device's grounding and decoupling recommendations.

🖥️

Embedded System Glue Logic

The LC4064V-75T48C is useful for implementing decode logic, reset coordination, watchdog handling, bus arbitration, and peripheral glue around a larger processor or controller. Sixty-four macrocells provide enough capacity for several interacting functions, reducing the number of discrete logic devices needed for moderate interface consolidation. The device's in-system-programmable architecture supports production programming and configuration revision, while the 48-TQFP package remains compatible with conventional surface-mount assembly. Review pin multiplexing, powered states during reset, and programming behavior to prevent contention on shared buses.

Récapitulatif des produits recommandés

LC4064V-75T48C Lattice Semiconductor Utilisé dans : Industrial Control Logic, Test and Measurement Systems LC4064V-75TN48C Same-family configuration alternative Utilisé dans : Industrial Control Logic, Test and Measurement Systems LC4064V-75T48E Lattice Semiconductor Utilisé dans : Peripheral Interface Bridging, Data Acquisition Front Ends LC4064C-75T48C Lattice Semiconductor Utilisé dans : Peripheral Interface Bridging, Data Acquisition Front Ends LC4064ZC-75T48C Same-family interface alternative Utilisé dans : Communications Sequencing, Embedded System Glue Logic LC4064V-75TN48I Same-package ordering variant Utilisé dans : Communications Sequencing, Embedded System Glue Logic
What are the key specifications of LC4064V-75T48C that engineers should know?
The LC4064V-75T48C is a 64-macrocell in-system-programmable CPLD with a 7.5 ns maximum propagation delay, 32 user I/O pins, and a 48-pin TQFP package. According to the Lattice Semiconductor ispMACH 4000V family documentation, the architecture supports in-system programming and migration between density devices that use the same package pinout. The specified supply range is 3.0 V to 3.6 V, with 1.8 V, 2.5 V, and 3.3 V I/O support identified for the family.
What is LC4064V-75T48C and what does it do?
The LC4064V-75T48C is a 64-macrocell CPLD used to implement user-defined control, interface, and glue logic. It provides four logic elements, 32 user I/O pins, and a maximum propagation delay of 7.5 ns in a 48-TQFP package. According to Lattice's ispMACH 4000V family documentation, its in-system-programmable architecture supports board-level configuration and design migration across compatible density devices in the same package.
Where can I download the LC4064V-75T48C datasheet PDF?
The LC4064V-75T48C datasheet is available through the Lattice Semiconductor ispMACH 4000V family document and the component-specific PDF index listed for this part. The family document covers the 4000V architecture, while the component datasheet identifies the LC4064V-75T48C's 64-macrocell configuration, 7.5 ns timing grade, 32 user I/O pins, and 48-TQFP package. Use the Lattice document for final electrical, pinout, and programming details.
Where can I find the LC4064V-75T48C pinout?
The LC4064V-75T48C pinout is documented in the Lattice Semiconductor device datasheet under the 48-TQFP pin-description and package diagrams. The package contains 48 pins, and the device exposes 32 user I/O pins alongside power, ground, configuration, and dedicated control functions. Use the package drawing to confirm pin numbering and the pin-description table when assigning PCB nets or programming the device.
What supply voltage does LC4064V-75T48C use?
The LC4064V-75T48C operates from a 3.0 V to 3.6 V supply. The Lattice Semiconductor ispMACH 4000V documentation identifies 1.8 V, 2.5 V, and 3.3 V as supported I/O voltage levels for the family. The core supply and individual bank requirements should still be checked against the device's power-supply pins and the external components specified in the manufacturer datasheet.
Is LC4064V-75T48C suitable for high-speed control logic?
Yes, the LC4064V-75T48C is suitable for compact high-speed control logic because it has a 7.5 ns maximum propagation-delay designation and 64 macrocells. According to the manufacturer family documentation, the device is intended for programmable logic implementations with deterministic configuration. Final timing closure still requires examination of individual paths, package delays, external component delays, and the applicable operating conditions.
What is the difference between LC4064V-75T48C and LC4064V-75TN48C?
The LC4064V-75T48C and LC4064V-75TN48C are closely related 48-pin ispMACH 4000V-series devices with a 7.5 ns speed designation, but their orderable suffix combinations may identify different grade, temperature, or packaging characteristics. The related LC4064V-75TN48C listing identifies a 400 MHz, 64-macrocell, 3.3 V CPLD. Verify the full ordering table and pin descriptions before treating either exact MPN as a drop-in replacement.
What is the best drop-in replacement for LC4064V-75T48C?
LC4064V-75T48C, LC4064V-75TN48C, LC4064V-75T48E, LC4064ZC-75T48C, and LC4064V-75TN48I are the closest same-family candidates identified for replacement review. Lattice's family documentation states that density devices in the same package maintain the same pinout, supporting migration within compatible ispMACH 4000-family devices. Exact replacement approval still requires checking operating temperature, supply levels, programming, and the complete ordering-code definitions.
Can LC4064C-75T48C replace LC4064V-75T48C?
LC4064C-75T48C may serve as a family-level migration option, but it should not be treated as an unconditional drop-in replacement for LC4064V-75T48C. The part names place both devices in the 64-macrocell 48-TQFP ispMACH 4000 class, while the V designation identifies the 4000V family variant with multiple I/O voltage options. Confirm core voltage, I/O voltage, temperature grade, timing limits, and programming requirements in the Lattice ordering guide.
When should I choose LC4064V-75T48C over a lower-density CPLD?
Choose the LC4064V-75T48C when a design benefits from 64 macrocells, 32 user I/O pins, and a 7.5 ns timing designation without moving to a larger package. It is particularly appropriate for control logic that combines several interfaces and requires in-system programmability. Select a lower-density device when the implemented logic fits comfortably below 64 macrocells and lower I/O capacity is sufficient, allowing a smaller package and potentially simpler board layout.
Is there a cross-brand pin-compatible equivalent for LC4064V-75T48C?
No cross-brand pin-compatible equivalent is established by the available component documentation. The closest identified alternatives are members of Lattice Semiconductor's own ispMACH 4000 and 4000V families, and Lattice explicitly documents same-package pinout consistency within its family. For a cross-brand migration, engineers should treat it as a redesign unless the replacement manufacturer supplies an explicit pinout, timing, voltage, and programming compatibility statement.
What can replace LC4064V-75T48C without changing the PCB?
The most direct PCB-compatible candidates are same-family LC4064V-75T48C alternatives that use the 48-pin footprint, including LC4064V-75TN48C and LC4064V-75T48E. Lattice's ispMACH 4000 family documentation supports common pinouts across density devices in the same package. A no-change replacement still requires confirmation of temperature grade, voltage compatibility, maximum propagation delay, and configuration requirements.
Where to buy LC4064V-75T48C online?
Use the Request a Quote form on this page to request LC4064V-75T48C availability, lead time, and an order quotation. The component is listed with a 48-LQFP package and is associated with a 64-macrocell, 7.5 ns CPLD configuration. Confirm the requested quantity, package, assembly form, and target date when submitting the inquiry so the quote reflects the exact MPN.
What is the price of LC4064V-75T48C?
Current commercial terms for LC4064V-75T48C should be obtained through the Request a Quote form on this page. The quote can reflect order quantity, production schedule, packaging, and requested delivery date. This avoids presenting a transient catalog figure that may not correspond to the required quantity or procurement conditions.
What is the lead time and stock status for LC4064V-75T48C?
Request current stock status, minimum order quantity, and lead time for LC4064V-75T48C through the Request a Quote form on this page. Because availability can change with purchasing volume and production scheduling, a date-specific confirmation is preferable to relying on an undated inventory statement. Include the required quantity, target delivery date, and acceptable packaging in the request.
How do I design the power and programming connections for LC4064V-75T48C?
Follow the Lattice Semiconductor power-supply, decoupling, programming-interface, and ground-layout guidance for the ispMACH 4000V family. Place the prescribed decoupling capacitor close to the relevant power pins and route programming signals so they remain accessible and free of excessive noise. The device's 3.0 V to 3.6 V supply range and family support for 1.8 V, 2.5 V, and 3.3 V I/O levels should be reconciled with every connected interface.

Données de référence d'ingénierie pour LC4064V-75T48C — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose LC4064V-75T48C when a design needs a deterministic, in-system-programmable CPLD with 64 macrocells, 32 user I/O pins, and a 7.5 ns timing designation in a 48-TQFP package. It is well suited to industrial sequencing, peripheral-interface bridging, test control, and embedded glue logic requiring multiple I/O levels. LC4064V-75TN48C is a close same-family candidate when its ordering-grade characteristics satisfy the design. Consider LC4064V-75T48E or LC4064ZC-75T48C only after confirming temperature, voltage, programming, and timing details. LC4064C-75T48C should be selected only when its supply and I/O capabilities are verified. No cross-brand option is established, so a foreign-manufacturer migration should be treated as a redesign rather than a drop-in replacement.

Comparaison avec les alternatives

Paramètre Ce produit LC4064V-75TN48C LC4064V-75T48E LC4064ZC-75T48C LC4064C-75T48C LC4064V-75TN48I
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Package 48-TQFP 48-TQFP 48-TQFP 48-TQFP 48-TQFP 48-TQFP
Device Type ispMACH 4000V CPLD ispMACH 4000V CPLD ispMACH 4000V CPLD ispMACH 4000-family CPLD ispMACH 4000-family CPLD ispMACH 4000V CPLD
In-System Programming Supported Supported Supported Supported Supported Supported

Principaux différenciateurs

  • Higher I/O capacity within a compact 48-pin control-logic package (vs LC4064V-75TN48C)
  • Multi-voltage I/O support in the 4000V architecture (vs LC4064C-75T48C)
  • Compact 7 ns x 7 ns surface-mount footprint for high-density logic (vs LC4064ZC-75T48C)

Notes de conception

Place the decoupling components specified by Lattice Semiconductor directly beside the corresponding power pins, using short ground returns and an uninterrupted ground plane. Keep programming-interface routing accessible for fixture or boundary-scan access. Before routing, assign the final programmable functions and review the device pin-description table because configurable pins can otherwise create avoidable package escape-routing pressure.

Create timing budgets that include the 7.5 ns maximum propagation-delay designation, external component delays, and package escape delays rather than treating 7.5 ns as the complete path delay. Use the manufacturer timing model to evaluate every registered or combinational path. For communications or test interfaces, assign clock and control signals with short, direct routes and avoid sharing narrow escape paths with slow peripheral signals.

Do not approve a replacement solely because the package and macrocell count match. Verify the complete ordering code, operating-temperature grade, core supply, I/O voltage levels, timing grade, configuration method, and pin multiplexing. This is especially important for LC4064C, LC4064Z, LC4064V, and suffix variants within the ispMACH 4000 family, whose functional similarities can conceal procurement or operating-condition differences.

Reconcile the 3.0 V to 3.6 V core supply with the voltages driven into configurable I/O pins. Confirm that every connected interface satisfies the bank's voltage limits and that no external peripheral can back-drive an I/O pin during power removal. Use the manufacturer's power-up and power-down sequence to define safe states for shared buses, enables, and programmable control outputs.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

Compliance attributes require confirmation from the manufacturer ordering guide or material declaration for the exact MPN.

Données vérifiées le : 2026-11-15 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

lc4064v datasheet LC4064V-75T48C datasheet LC4064V-75T48C pinout LC4064V-75T48C datasheet pdf LC4064V-75T48C equivalent LC4064V-75T48C replacement LC4064V-75T48C footprint LC4064V-75T48C price LC4064V-75T48C stock LC4064V-75T48C vs LC4064V-75TN48C Lattice LC4064V-75T48C LC4064V-75T48C TQFP pinout

Composants & termes associés

Lattice Semiconductor LC4064V-75T48C LC4064V-75TN48C LC4064V-75T48E LC4064ZC-75T48C LC4064C-75T48C LC4064V-75TN48I ispMACH 4000V ispMACH 4000 CPLD complex programmable logic device programmable logic device programmable logic IC semiconductor 64 macrocells 32 user I/O pins 7.5 ns propagation delay 48-TQFP TQFP package family surface mount in-system programming 1.8 V I/O 2.5 V I/O 3.3 V I/O industrial control logic
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ