Lattice Semiconductor

LC4128V-5T128I - 5ns 92-I/O CPLD | Lattice Semiconductor

Référence : LC4128V-5T128I ✗ Fin de vie
1.8 V, 2.5 V, or 3.3 V Vdss 128-pin TQFP Package 380 MHz Speed
MOQ : 1 |

LC4128V-5T128I Présentation

Lattice Semiconductor LC4128V-5T128I is an ispMACH 4000V in-system-programmable CPLD with 128 macrocells, 92 user I/O pins, a 5 ns maximum propagation delay, and a 128-pin TQFP package. It supports 1.8 V, 2.5 V, and 3.3 V supply configurations for industrial logic designs requiring deterministic programmable routing and compact integration.

A CPLD is a complex programmable logic device that combines multiple programmable logic blocks with a fixed internal interconnect structure. The LC4128V belongs to the CPLD hierarchy within programmable logic devices, where it offers a practical alternative to small FPGA or ASIC designs when moderate logic density, fast deterministic routing, and nonvolatile in-system programmability are the main requirements.

Key features include 128 macrocells, a maximum propagation delay of 5 ns, and 92 available I/O pins. The device is supplied in a 128-pin TQFP package and is specified for an industrial junction-temperature range of -40°C to +105°C. Its in-system programming capability allows configuration storage and update without removing the device from its assembled circuit.

The ispMACH 4000V architecture is intended for interface, control, decode, and glue-logic applications. Its macrocell-based organization provides a comparatively predictable signal path, while the 92 I/O pins permit direct connections to external buses, converters, memories, and industrial interfaces. The product listing identifies the LC4128V-5T128I as a 5 ns industrial-grade member of the ispMACH 4000V family.

Typical uses include industrial control and data-acquisition systems, peripheral bus controllers, display and communication interfaces, embedded system timing, and board-level logic consolidation. Using the CPLD beside a microcontroller or processor can offload fixed-format decoding, handshake generation, protocol conversion, and autonomous control functions while preserving deterministic behavior.

PCB design should use the manufacturer pinout and package drawing for every signal assignment. Keep configuration, clock, and reset paths short, provide the required decoupling and programming interface, and verify unused I/O states in the design tool. The 128-pin TQFP footprint also requires adequate solder-mask and paste control for reliable fine-pitch assembly.

This product page combines device specifications, package information, practical applications, and selection guidance with a qualified comparison of same-family Lattice Semiconductor options. It highlights timing, temperature, packaging, and programming considerations that engineers must evaluate before replacing an FPGA, ASIC, or another programmable-logic implementation.

Alternatives de remplacement direct pour LC4128V-5T128I — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

LC4128V-5TN128I

✅ Remplacement direct
📦 128-pin TQFP
Same LC4128V family and 5 ns speed designation; ordering-code temperature or qualification differences must be confirmed

📋 Alternative de référence (hors catalogue)

LC4128V-75TN128I

✅ Remplacement direct
📦 128-pin TQFP
Propagation delay increases from 5 ns to 7.5 ns, a 2.5 ns or 50% difference

📋 Alternative de référence (hors catalogue)

LC4128V-5T128C

✅ Remplacement direct
📦 128-pin TQFP
Same LC4128V family and 5 ns speed designation; C suffix indicates a different ordering temperature grade

📋 Alternative de référence (hors catalogue)

LC4128V-5T128I Valeurs maximales et caractéristiques électriques

Device Type ispMACH 4000V in-system-programmable CPLD
Macrocells 128 macrocells
Maximum Propagation Delay 5 ns
User I/O Pins 92 pins
Supply Voltage Options 1.8 V, 2.5 V, or 3.3 V
Maximum Operating Frequency 380 MHz
Internal Frequency 200 MHz
Programmable Global Clock Pins Up to 4 pins
Boîtier 128-pin TQFP
Junction Temperature Range -40°C to +105°C
Industrial Temperature Grade I grade
Programming Method In-system programmable
Logic Family CMOS
Type de montage Surface mount
Statut RoHS unknown
REACH Status unknown
AEC-Q100 Qualification Not applicable

Guide de configuration des broches du LC4128V-5T128I 128-pin tqfp

Configuration des broches du LC4128V-5T128I (boîtier 128-pin tqfp). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 128-pin tqfp pour le LC4128V-5T128I

Aucune donnée de brochage détaillée disponible pour LC4128V-5T128I.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

LC4128V-5T128I convient pour 6 applications: Industrial Control Logic, Data-Acquisition Interface, Communication Interface Consolidation, Display and Peripheral Control, Automotive and Vehicle Electronics, Test and Measurement Systems.

🏭

Industrial Control Logic

LC4128V-5T128I fits deterministic industrial control blocks that combine decoding, sequencing, and I/O handling without allocating an FPGA. Its 128 macrocells and 92 user I/O pins provide substantial connectivity for sensor interfaces, actuator controls, interlocks, and operating-state logic. The 5 ns maximum propagation delay supports short combinational paths, while the -40°C to +105°C junction-temperature specification covers industrial environments. In-system programming allows a finished control board to retain or update its configuration without component removal.

📊

Data-Acquisition Interface

The CPLD can coordinate multiplexers, sample controls, data latches, and acquisition triggers around a processor or ADC. Its 92 user I/O pins reduce the number of external glue devices, while the 5 ns delay class is useful for short control and decode paths. The 128-pin TQFP package supports routing to multiple bus widths on a multilayer PCB. LC4128V-5T128I is especially appropriate when deterministic interface behavior and field reconfiguration are more important than implementing a large CPU subsystem.

🌐

Communication Interface Consolidation

LC4128V-5T128I can consolidate programmable communication front ends, including bus arbitration, byte-lane steering, interrupt generation, and protocol framing. Its 92 I/O pins are useful for parallel data paths and control signals, while its macrocell architecture supports compact state-machine implementations. The 5 ns maximum propagation delay can reduce latency in short combinational and registered paths. For new production, confirm the exact device lifecycle and obtain a pin-compatible source with the required operating-temperature grade.

📺

Display and Peripheral Control

The 128 macrocells can implement display timing, character sequencing, keypad scanning, and peripheral multiplexing around a host processor. LC4128V-5T128I provides 92 user I/O pins for connecting display signals, buttons, indicators, and external interface logic within a compact TQFP footprint. Its 5 ns delay class supports short timing-control paths, while in-system programming simplifies display-timing updates. Board designers should use the manufacturer pin table to distinguish dedicated configuration, power, clock, and general-purpose I/O functions.

🚗

Automotive and Vehicle Electronics

LC4128V-5T128I can be evaluated for non-safety-critical vehicle electronics such as body-control decoding, load management, panel interfacing, and distributed I/O expansion. Its 5 ns propagation delay and 92 I/O pins suit compact deterministic control logic, while the industrial temperature range covers many vehicle environments. However, the I-grade designation does not establish AEC-Q100 qualification. An automotive program must confirm qualification status, radiation and transient requirements, supply characteristics, and functional-safety assumptions separately.

🔧

Test and Measurement Systems

A CPLD-based measurement front end can use LC4128V-5T128I to sequence test commands, route results, generate precise control strobes, and adapt instrument interfaces. The 128 macrocells provide enough logic for protocol translators and instrument-control state machines, while 92 user I/O pins support parallel and serial front-end connections. The 5 ns delay class helps minimize control-path uncertainty. Designers should constrain clocks through the Lattice design tool and verify timing against the specific board configuration rather than relying only on the device speed grade.

Récapitulatif des produits recommandés

LC4128V-5TN128I Same-family 5 ns CPLD ordering option Utilisé dans : Industrial Control Logic, Data-Acquisition Interface, Communication Interface Consolidation, Display and Peripheral Control, Automotive and Vehicle Electronics, Test and Measurement Systems LC4128V-5T128C Same-family 5 ns commercial-grade ordering option Utilisé dans : Industrial Control Logic, Communication Interface Consolidation, Automotive and Vehicle Electronics LC4128V-75TN128I Lower-speed option for relaxed timing requirements Utilisé dans : Data-Acquisition Interface, Display and Peripheral Control, Test and Measurement Systems
What is LC4128V-5T128I?
LC4128V-5T128I is a Lattice Semiconductor ispMACH 4000V in-system-programmable CPLD with 128 macrocells and 92 user I/O pins. According to the manufacturer product information, it provides a 5 ns maximum propagation delay in a 128-pin TQFP package. The device is intended for deterministic logic, interface, decoding, and control functions where programmable logic is required without the resource demand of a larger FPGA.
What are the key specifications of LC4128V-5T128I that engineers should know?
The LC4128V-5T128I combines 128 macrocells, 92 user I/O pins, a 5 ns maximum propagation delay, and in-system programming in a 128-pin TQFP package. The Lattice Semiconductor product information identifies support for 1.8 V, 2.5 V, and 3.3 V supply configurations and an industrial junction-temperature range of -40°C to +105°C. These figures make it most relevant to compact industrial control and interface designs requiring deterministic programmable logic.
Where can I download the LC4128V-5T128I datasheet PDF?
The LC4128V-5T128I datasheet PDF is available through the Lattice Semiconductor document listing linked on this product page. The manufacturer documentation covers the ispMACH 4000V architecture, supply options, timing, package information, and programming details. Use the pin-description table and package drawing in that document when assigning signals or qualifying a PCB layout, especially because the 128-pin TQFP footprint has more than 100 physical connections.
Where can I find the LC4128V-5T128I pinout?
Use the pinout in the LC4128V-5T128I manufacturer datasheet for authoritative signal assignments, power connections, configuration pins, and I/O directions. The component is identified as a 128-pin TQFP device with 92 user I/O pins, but the complete numbered pin table is not reproduced on this page. The package diagram and pin table should be cross-checked together before routing a board or programming the CPLD.
Where to buy LC4128V-5T128I online?
Use the Request a Quote form on this page to request availability, sourcing support, and a current quotation for LC4128V-5T128I. The exact MPN is identified as Lattice Semiconductor’s 128-macrocell ispMACH 4000V CPLD with a 5 ns maximum propagation delay. Because this is an older programmable-logic family, buyers should request the current lifecycle, stock, traceability, and minimum-order information for the required package and quantity.
What is the price of LC4128V-5T128I?
The current commercial price for LC4128V-5T128I should be requested through the Request a Quote form on this page. The part is an obsolete-family 128-pin TQFP CPLD, so its commercial status may depend on remaining factory inventory, package traceability, and the requested quantity. The structured pricing area on this page provides the current quotation route without relying on a stale historical catalog amount.
What is the lead time for LC4128V-5T128I?
The current lead time for LC4128V-5T128I depends on remaining factory inventory and required traceability, so request a firm schedule through the Request a Quote form on this page. State the required quantity, date code, and inspection requirements when submitting the request. The device is specified for industrial temperatures from -40°C to +105°C at the junction, but temperature grade and delivery availability are separate procurement considerations.
Is LC4128V-5T128I in stock?
Stock status for LC4128V-5T128I must be confirmed through the Request a Quote form on this page. The component is an older Lattice Semiconductor ispMACH 4000V CPLD, and a listing alone does not establish current inventory. Ask the supplier to confirm quantity, date code, package condition, and whether the shipment is factory stock or traceable supply before releasing the purchase order.
LC4128V-5T128I vs LC4128V-5TN128I - which is better for industrial designs?
LC4128V-5T128I and LC4128V-5TN128I are closely related Lattice Semiconductor ispMACH 4000V devices, but the ordering-code differences must be checked against the manufacturer’s device-selection table before substitution. The target part is identified as a 5 ns, 92-I/O, 128-pin TQFP industrial-temperature CPLD, while LC4128V-5TN128I appears in distributor listings as a related ordering variant. Confirm electrical ratings, temperature grade, pinout, and programming configuration before treating it as a drop-in replacement.
LC4128V-5T128I vs LC4128V-75TN128I - which is better for timing-critical designs?
LC4128V-5T128I is the better choice when the 5 ns speed grade is required because LC4128V-75TN128I is identified as a 7.5 ns class option. Both are Lattice Semiconductor LC4128V-family CPLDs associated with the same 128-pin class of implementation, but lower propagation delay reduces combinational timing margin. Confirm pin compatibility, supply configuration, and exact operating conditions before using the 7.5 ns variant as a replacement.
When should I choose LC4128V-5T128I over LC4128V-75TN128I?
Choose LC4128V-5T128I when the design must meet a 5 ns maximum propagation-delay requirement or needs additional timing margin. Choose LC4128V-75TN128I when a 7.5 ns device is acceptable and slower operation is preferable. The comparison should also include the exact temperature grade, supply voltage, pinout, package, configuration compatibility, and lifecycle availability rather than relying on speed grade alone.
Is LC4128V-5T128I suitable for industrial control systems?
LC4128V-5T128I is suitable for many industrial control functions because it provides 128 macrocells, 92 user I/O pins, a 5 ns maximum propagation delay, and an industrial junction-temperature range of -40°C to +105°C. Its in-system programming supports configuration retention and updates on assembled boards. For safety-critical control, verify system qualification, transient tolerance, and the required industrial or automotive standards independently of the device temperature grade.
What can replace LC4128V-5T128I?
LC4128V-5TN128I and LC4128V-75TN128I are the closest documented same-family options, while LC4128V-5T128C is a related commercial-temperature ordering option. A valid replacement must match the 128-pin footprint, pin assignments, power configuration, macrocell resources, supported I/O standards, and configuration method. The speed and temperature differences must be acceptable in the target design, so verify the manufacturer ordering information before installation.
Is LC4128V-5T128I the same as LC4128V-5TN128I?
LC4128V-5T128I and LC4128V-5TN128I are not automatically identical despite their closely related ordering codes. The target is identified as a 5 ns, 92-I/O, 128-pin TQFP industrial-temperature CPLD, while LC4128V-5TN128I is listed as a related Lattice Semiconductor part. Treat it as a candidate replacement only after the manufacturer ordering table confirms the package, temperature grade, supply options, pinout, and device status.
What is the best Lattice Semiconductor equivalent for LC4128V-5T128I?
LC4128V-5TN128I is the leading same-brand candidate because it appears in component listings as a closely related LC4128V configuration with the same 5 ns speed designation. LC4128V-75TN128I offers a 7.5 ns alternative, while LC4128V-5T128C represents a related commercial-temperature ordering option. Confirm that the selected ordering code preserves the 128-pin footprint, required resources, supply voltage, and programming interface before treating it as a drop-in replacement.

Données de référence d'ingénierie pour LC4128V-5T128I — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose LC4128V-5T128I when an industrial design needs a 128-macrocell CPLD, 92 user I/O pins, and a 5 ns maximum propagation-delay class in a 128-pin TQFP package. Its in-system programming is useful for field configuration and design iteration. Consider LC4128V-5TN128I when that ordering code is the preferred source and its manufacturer ordering information confirms identical electrical and thermal requirements. LC4128V-75TN128I may be acceptable when a 7.5 ns propagation delay remains within the timing budget, but it should not replace the 5 ns part without timing analysis. LC4128V-5T128C is a candidate only when its commercial-grade operating range is acceptable. For any substitution, verify the pinout, supply requirements, I/O standards, configuration method, lifecycle status, and assembly footprint before ordering.

Comparaison avec les alternatives

Paramètre Ce produit LC4128V-5TN128I LC4128V-75TN128I LC4128V-5T128C
Package 128-pin TQFP 128-pin TQFP 128-pin TQFP 128-pin TQFP
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Device Family ispMACH 4000V CPLD ispMACH 4000V CPLD ispMACH 4000V CPLD ispMACH 4000V CPLD
Maximum Propagation Delay 5 ns 5 ns 7.5 ns 5 ns
Supply Voltage Options 1.8 V, 2.5 V, or 3.3 V 1.8 V, 2.5 V, or 3.3 V 1.8 V, 2.5 V, or 3.3 V 1.8 V, 2.5 V, or 3.3 V
Programming Method In-system programmable In-system programmable In-system programmable In-system programmable

Principaux différenciateurs

  • Faster timing grade than the 7.5 ns family option (vs LC4128V-75TN128I)
  • Industrial-temperature ordering designation (vs LC4128V-5T128C)
  • Closest same-speed LC4128V ordering option (vs LC4128V-5TN128I)

Notes de conception

Assign signals using the manufacturer pin-description table rather than a generic TQFP drawing. Keep the configuration interface, clock inputs, reset paths, and critical outputs away from noisy switching nodes. With 92 user I/O pins plus power and configuration functions, pin multiplexing must be checked carefully before finalizing the schematic; a mechanically identical 128-pin package is not sufficient to establish electrical drop-in compatibility.

Apply the Lattice design-tool timing constraints for every clock domain and external interface. The 5 ns propagation-delay specification is a device speed indication, not a guarantee that every implemented path meets timing. Constrain all synchronous logic, specify setup and hold requirements for external devices, and avoid treating the alternative 7.5 ns grade as equivalent when a design relies on the full timing margin of the 5 ns device.

Design the power network for the exact supply option used in the design, such as 1.8 V, 2.5 V, or 3.3 V. Place required bypass capacitors close to the device power pins and keep high-current return paths compact. Because programming, configuration, and I/O behavior can depend on power sequencing, follow the manufacturer recommendations for ramp rates, power-on reset behavior, and valid supply transitions.

Do not substitute parts solely because their ordering codes contain the same family name and speed designation. Compare the exact package, pinout, temperature grade, supply configuration, macrocell resources, I/O standards, and programming interface. In particular, LC4128V-5T128C differs in ordering grade, while LC4128V-75TN128I has a 7.5 ns delay; either difference can affect qualification even when the footprint appears unchanged.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The device is an industrial-temperature I-grade CPLD; no RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification declaration is stated for the exact MPN. AEC-Q100 is not applicable to the identified industrial ordering grade.

Données vérifiées le : 2026-11-19 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

lc4128v datasheet LC4128V-5T128I datasheet LC4128V-5T128I datasheet pdf LC4128V-5T128I pinout LC4128V-5T128I schematic LC4128V-5T128I equivalent LC4128V-5T128I replacement LC4128V-5T128I cross reference LC4128V-5T128I vs LC4128V-75TN128I LC4128V-5T128I TQFP footprint LC4128V-5T128I price LC4128V-5T128I stock Lattice Semiconductor LC4128V-5T128I LC4128V-5T128I industrial control LC4128V-5T128I 5ns CPLD

Composants & termes associés

Lattice Semiconductor LC4128V-5T128I LC4128V-5TN128I LC4128V-75TN128I LC4128V-5T128C ispMACH 4000V CPLD complex programmable logic device programmable logic device in-system programmable device FPGA ASIC 128 macrocells 92 user I/O pins 5 ns propagation delay 1.8 V supply 2.5 V supply 3.3 V supply 128-pin TQFP TQFP package family surface-mount package industrial temperature range CMOS industrial control data acquisition communication interface
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ