LC4128V-5T128I - 5ns 92-I/O CPLD | Lattice Semiconductor
N.º da peça: LC4128V-5T128I ✗ Fim de vidaLC4128V-5T128I Visão geral
A CPLD is a complex programmable logic device that combines multiple programmable logic blocks with a fixed internal interconnect structure. The LC4128V belongs to the CPLD hierarchy within programmable logic devices, where it offers a practical alternative to small FPGA or ASIC designs when moderate logic density, fast deterministic routing, and nonvolatile in-system programmability are the main requirements.
Key features include 128 macrocells, a maximum propagation delay of 5 ns, and 92 available I/O pins. The device is supplied in a 128-pin TQFP package and is specified for an industrial junction-temperature range of -40°C to +105°C. Its in-system programming capability allows configuration storage and update without removing the device from its assembled circuit.
The ispMACH 4000V architecture is intended for interface, control, decode, and glue-logic applications. Its macrocell-based organization provides a comparatively predictable signal path, while the 92 I/O pins permit direct connections to external buses, converters, memories, and industrial interfaces. The product listing identifies the LC4128V-5T128I as a 5 ns industrial-grade member of the ispMACH 4000V family.
Typical uses include industrial control and data-acquisition systems, peripheral bus controllers, display and communication interfaces, embedded system timing, and board-level logic consolidation. Using the CPLD beside a microcontroller or processor can offload fixed-format decoding, handshake generation, protocol conversion, and autonomous control functions while preserving deterministic behavior.
PCB design should use the manufacturer pinout and package drawing for every signal assignment. Keep configuration, clock, and reset paths short, provide the required decoupling and programming interface, and verify unused I/O states in the design tool. The 128-pin TQFP footprint also requires adequate solder-mask and paste control for reliable fine-pitch assembly.
This product page combines device specifications, package information, practical applications, and selection guidance with a qualified comparison of same-family Lattice Semiconductor options. It highlights timing, temperature, packaging, and programming considerations that engineers must evaluate before replacing an FPGA, ASIC, or another programmable-logic implementation.
Alternativas drop-in para LC4128V-5T128I — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
LC4128V-5TN128I
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
LC4128V-75TN128I
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
LC4128V-5T128C
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
LC4128V-5T128I Classificações máximas e características elétricas
| Device Type | ispMACH 4000V in-system-programmable CPLD |
| Macrocells | 128 macrocells |
| Maximum Propagation Delay | 5 ns |
| User I/O Pins | 92 pins |
| Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| Maximum Operating Frequency | 380 MHz |
| Internal Frequency | 200 MHz |
| Programmable Global Clock Pins | Up to 4 pins |
| Encapsulamento | 128-pin TQFP |
| Junction Temperature Range | -40°C to +105°C |
| Industrial Temperature Grade | I grade |
| Programming Method | In-system programmable |
| Logic Family | CMOS |
| Tipo de montagem | Surface mount |
| Status RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | Not applicable |
Guia de Configuração de Pinos do LC4128V-5T128I 128-pin tqfp
Configuração de pinos para LC4128V-5T128I (pacote 128-pin tqfp). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para LC4128V-5T128I.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
LC4128V-5T128I é adequado para 6 aplicaçãos: Industrial Control Logic, Data-Acquisition Interface, Communication Interface Consolidation, Display and Peripheral Control, Automotive and Vehicle Electronics, Test and Measurement Systems.
Industrial Control Logic
LC4128V-5T128I fits deterministic industrial control blocks that combine decoding, sequencing, and I/O handling without allocating an FPGA. Its 128 macrocells and 92 user I/O pins provide substantial connectivity for sensor interfaces, actuator controls, interlocks, and operating-state logic. The 5 ns maximum propagation delay supports short combinational paths, while the -40°C to +105°C junction-temperature specification covers industrial environments. In-system programming allows a finished control board to retain or update its configuration without component removal.
Recomendado
Data-Acquisition Interface
The CPLD can coordinate multiplexers, sample controls, data latches, and acquisition triggers around a processor or ADC. Its 92 user I/O pins reduce the number of external glue devices, while the 5 ns delay class is useful for short control and decode paths. The 128-pin TQFP package supports routing to multiple bus widths on a multilayer PCB. LC4128V-5T128I is especially appropriate when deterministic interface behavior and field reconfiguration are more important than implementing a large CPU subsystem.
Recomendado
Communication Interface Consolidation
LC4128V-5T128I can consolidate programmable communication front ends, including bus arbitration, byte-lane steering, interrupt generation, and protocol framing. Its 92 I/O pins are useful for parallel data paths and control signals, while its macrocell architecture supports compact state-machine implementations. The 5 ns maximum propagation delay can reduce latency in short combinational and registered paths. For new production, confirm the exact device lifecycle and obtain a pin-compatible source with the required operating-temperature grade.
Recomendado
Display and Peripheral Control
The 128 macrocells can implement display timing, character sequencing, keypad scanning, and peripheral multiplexing around a host processor. LC4128V-5T128I provides 92 user I/O pins for connecting display signals, buttons, indicators, and external interface logic within a compact TQFP footprint. Its 5 ns delay class supports short timing-control paths, while in-system programming simplifies display-timing updates. Board designers should use the manufacturer pin table to distinguish dedicated configuration, power, clock, and general-purpose I/O functions.
Recomendado
Automotive and Vehicle Electronics
LC4128V-5T128I can be evaluated for non-safety-critical vehicle electronics such as body-control decoding, load management, panel interfacing, and distributed I/O expansion. Its 5 ns propagation delay and 92 I/O pins suit compact deterministic control logic, while the industrial temperature range covers many vehicle environments. However, the I-grade designation does not establish AEC-Q100 qualification. An automotive program must confirm qualification status, radiation and transient requirements, supply characteristics, and functional-safety assumptions separately.
Recomendado
Test and Measurement Systems
A CPLD-based measurement front end can use LC4128V-5T128I to sequence test commands, route results, generate precise control strobes, and adapt instrument interfaces. The 128 macrocells provide enough logic for protocol translators and instrument-control state machines, while 92 user I/O pins support parallel and serial front-end connections. The 5 ns delay class helps minimize control-path uncertainty. Designers should constrain clocks through the Lattice design tool and verify timing against the specific board configuration rather than relying only on the device speed grade.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para LC4128V-5T128I — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | LC4128V-5TN128I | LC4128V-75TN128I | LC4128V-5T128C |
|---|---|---|---|---|
| Package | 128-pin TQFP | 128-pin TQFP | 128-pin TQFP | 128-pin TQFP |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Device Family | ispMACH 4000V CPLD | ispMACH 4000V CPLD | ispMACH 4000V CPLD | ispMACH 4000V CPLD |
| Maximum Propagation Delay | 5 ns | 5 ns | 7.5 ns | 5 ns |
| Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V | 1.8 V, 2.5 V, or 3.3 V | 1.8 V, 2.5 V, or 3.3 V | 1.8 V, 2.5 V, or 3.3 V |
| Programming Method | In-system programmable | In-system programmable | In-system programmable | In-system programmable |
Principais diferenciais
- Faster timing grade than the 7.5 ns family option (vs LC4128V-75TN128I)
- Industrial-temperature ordering designation (vs LC4128V-5T128C)
- Closest same-speed LC4128V ordering option (vs LC4128V-5TN128I)
Notas de projeto
Assign signals using the manufacturer pin-description table rather than a generic TQFP drawing. Keep the configuration interface, clock inputs, reset paths, and critical outputs away from noisy switching nodes. With 92 user I/O pins plus power and configuration functions, pin multiplexing must be checked carefully before finalizing the schematic; a mechanically identical 128-pin package is not sufficient to establish electrical drop-in compatibility.
Apply the Lattice design-tool timing constraints for every clock domain and external interface. The 5 ns propagation-delay specification is a device speed indication, not a guarantee that every implemented path meets timing. Constrain all synchronous logic, specify setup and hold requirements for external devices, and avoid treating the alternative 7.5 ns grade as equivalent when a design relies on the full timing margin of the 5 ns device.
Design the power network for the exact supply option used in the design, such as 1.8 V, 2.5 V, or 3.3 V. Place required bypass capacitors close to the device power pins and keep high-current return paths compact. Because programming, configuration, and I/O behavior can depend on power sequencing, follow the manufacturer recommendations for ramp rates, power-on reset behavior, and valid supply transitions.
Do not substitute parts solely because their ordering codes contain the same family name and speed designation. Compare the exact package, pinout, temperature grade, supply configuration, macrocell resources, I/O standards, and programming interface. In particular, LC4128V-5T128C differs in ordering grade, while LC4128V-75TN128I has a 7.5 ns delay; either difference can affect qualification even when the footprint appears unchanged.
Informações de conformidade
The device is an industrial-temperature I-grade CPLD; no RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification declaration is stated for the exact MPN. AEC-Q100 is not applicable to the identified industrial ordering grade.