LC4256V-5T176I - 227MHz 256-Macrocells CPLD | Lattice
Référence : LC4256V-5T176I ✓ ActifLC4256V-5T176I Présentation
A complex programmable logic device, commonly called a CPLD, combines programmable logic arrays with a nonvolatile configuration architecture. The LC4256V-5T176I sits in the FPGA & CPLD category, where its deterministic timing and macrocell-based logic make it useful for control logic, bus arbitration, state machines, interface adaptation, and general-purpose glue logic. Its 3 V to 3.6 V internal supply range supports systems designed around modern low-voltage digital rails.
The device provides 256 macrocells and a maximum operating frequency of 227 MHz. Its 128 dedicated I/O pins permit dense parallel interfaces without requiring an external companion device. The -5 speed grade establishes a maximum propagation delay of 5 ns, while the 176-pin TQFP surface-mount package provides adequate pin density for high-pin-count logic implementations. In-system programming allows the same PCB design to be configured or updated without removing the device.
The ispMACH 4000V architecture blends the established ispLSI 2000 and ispMACH 4A design approaches. This family-level architecture supports deterministic logic implementation through interconnected macrocells and general-purpose routing. Compared with a soft programmable logic core, a dedicated CPLD provides a physical implementation that continues operating according to its configured design without requiring an external processor or microcontroller.
Typical uses include industrial control, communications equipment, data acquisition, test and measurement, security systems, and embedded control. The 128 I/O count is useful for legacy peripheral buses and parallel control logic, while the 227 MHz performance supports demanding timing and clock-related functions. The broad I/O availability also makes the device suitable for consolidating several smaller programmable logic components.
PCB design should preserve the 176-pin TQFP land pattern, provide all required supply decoupling, and route programming and configuration signals according to the manufacturer pin-description table. Because this is a large 24 mm by 24 mm package, careful placement around fine-pitch routing and thermal-sensitive circuitry is important. Signal-integrity checks are particularly important for high-speed clock, control, and external interface routes.
This product page consolidates device specifications, package information, comparison criteria, replacement options, and practical integration guidance. It is intended to help engineers identify whether the LC4256V-5T176I fits an existing programmable-logic design before committing to a 176-pin board layout.
Alternatives de remplacement direct pour LC4256V-5T176I — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
LC4256V-5T176C
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
LC4256V-5TN176I
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
LC4256V-75T176C
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
LC4256V-75T176E
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
LC4256B-5T176I
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →LC4256V-5T176I Valeurs maximales et caractéristiques électriques
| Device Type | Complex programmable logic device |
| Product Family | ispMACH 4000V |
| Architecture | Blend of ispLSI 2000 and ispMACH 4A architectures |
| Number of Macrocells | 256 macrocells |
| Number of Logic Elements | 16 logic elements |
| Maximum Frequency | 227 MHz |
| Maximum Propagation Delay | 5 ns |
| Plage de tension d'entrée | 3.3 V, 2.5 V, and 1.8 V |
| Internal Supply Voltage Range | 3 V to 3.6 V |
| Number of I/O Pins | 128 I/O pins |
| Programming Type | In-system programmable |
| Boîtier | 176-pin TQFP, 24 mm x 24 mm |
| Type de montage | Surface mount |
| Logic Voltage Support | 1.8 V, 2.5 V, and 3.3 V |
Guide de configuration des broches du LC4256V-5T176I 176-pin tqfp, 24 mm x 24 mm
Configuration des broches du LC4256V-5T176I (boîtier 176-pin tqfp, 24 mm x 24 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour LC4256V-5T176I.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
LC4256V-5T176I convient pour 6 applications: Industrial Machine Control, Communications Interface Consolidation, Data Acquisition Control, Test and Measurement Equipment, Security and Access Control, Embedded Control and Bus Arbitration.
Industrial Machine Control
The LC4256V-5T176I fits centralized machine-control logic where deterministic timing, numerous I/O points, and nonvolatile configuration are important. Its 256 macrocells can implement sequencers, interlocks, alarm logic, and motion-control interfaces, while 128 I/O pins provide ample connectivity to sensors, actuators, and legacy controller buses. The 5 ns propagation-delay specification supports tighter control paths than the 7.5 ns alternatives, and the industrial suffix suits equipment operating across extended temperature conditions. In-system programming allows configuration and diagnostics to be handled without removing the device from the assembled controller.
Recommandé
Communications Interface Consolidation
The LC4256V-5T176I can consolidate protocol conversion, FIFO control, framing, and arbitration logic in networking and communications equipment. Its 128 I/O pins are particularly useful for parallel legacy interfaces, while the 227 MHz operating frequency provides margin for clocked control functions. A dedicated CPLD also removes the need for a separate processor to perform simple bus arbitration or protocol translation. The 176-pin TQFP package supports dense routing on equipment boards where equivalent discrete programmable-logic components would consume excessive board area.
Recommandé
Data Acquisition Control
The LC4256V-5T176I is suitable for sequencing and supervising multi-channel data-acquisition systems. Its 256 macrocells can implement trigger pipelines, sample counters, channel selectors, and interface timing, while 128 I/O pins support parallel sensor, converter, and memory connections. The 5 ns speed grade helps preserve margin in clocked control paths, and in-system programming supports configuration storage and board-level updates. Compared with the 7.5 ns alternatives, it is the preferable choice where acquisition timing margins are tight and deterministic routing is required.
Recommandé
Test and Measurement Equipment
The LC4256V-5T176I can implement sequencing, pattern generation, status decoding, and instrument-bus arbitration in test and measurement equipment. The 256-macrocell capacity allows multiple timing-critical functions to share one programmable device, while 128 I/O pins connect instruments, fixtures, and control boards. Its 227 MHz maximum frequency and 5 ns propagation-delay class provide useful timing margin for synchronous control. In-system programming simplifies production configuration, diagnostics, and field upgrades when instrument firmware evolves.
Recommandé
Security and Access Control
The LC4256V-5T176I is well suited to access-control and security equipment requiring deterministic credential-handling logic, event sequencing, alarm prioritization, and multiple peripheral interfaces. The device provides 256 macrocells and 128 I/O pins for readers, keypad scanners, displays, communication interfaces, and supervisory outputs. Its 5 ns timing class supports high-speed control functions, while nonvolatile programmable logic permits standalone operation after configuration. The 176-pin TQFP footprint also allows a compact implementation compared with multiple smaller CPLDs.
Recommandé
Embedded Control and Bus Arbitration
The LC4256V-5T176I can act as a dedicated bus arbiter, protocol bridge, or supervisory controller between a processor and peripheral devices. Its 128 I/O pins reduce the need for multiplexing logic, while 256 macrocells accommodate arbitration states, command decoding, error handling, and watchdog functions. The 227 MHz rating provides substantial timing headroom for synchronous processor interfaces, and the 5 ns delay specification is preferable when minimizing combinational control latency is important. In-system programming enables the logic map to be revised during product maintenance.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour LC4256V-5T176I — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | LC4256V-5T176C | LC4256V-5TN176I | LC4256V-75T176C | LC4256V-75T176E | LC4256B-5T176I |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 176-pin TQFP (24 mm x 24 mm) | 176-pin TQFP (24 mm x 24 mm) | 176-pin TQFP (24 mm x 24 mm) | 176-pin TQFP (24 mm x 24 mm) | 176-pin TQFP (24 mm x 24 mm) | 176-pin TQFP (24 mm x 24 mm) |
| Product Family | ispMACH 4000V | ispMACH 4000V | ispMACH 4000V | ispMACH 4000V | ispMACH 4000V | ispMACH 4000B |
| Temperature Suffix | I | C | I | C | E | I |
Principaux différenciateurs
- Faster propagation-delay class (vs LC4256V-75T176C)
- Industrial-temperature designation (vs LC4256V-5T176C)
- Same-family architecture with direct package reuse (vs LC4256B-5T176I)
- Higher timing headroom than slower 4000V option (vs LC4256V-10T176I)
Notes de conception
Use the 176-pin TQFP land pattern from the manufacturer package drawing and verify pin 1 orientation against the PCB silkscreen before fabrication. The package occupies 24 mm by 24 mm and has a dense perimeter pitch, so small assembly-placement errors can create solder bridges or incorrect connections. Preserve component clearance around all four sides and provide adequate space for the reflow profile and inspection.
Decouple each applicable supply rail at the device pins and follow the manufacturer pin table for core and I/O supply connections. The LC4256V-5T176I supports 1.8 V, 2.5 V, and 3.3 V logic arrangements, but those figures describe supported voltage options rather than permission to combine rails arbitrarily. Check voltage-domain sequencing and external driver levels before attaching powered peripherals to the device.
Route clocks, configuration signals, and high-fanout control nets away from noisy switching-power regions and keep return paths continuous. The 227 MHz device rating describes logic capability, not a guarantee of acceptable board-level signal integrity. Add source-series termination where driver loading requires it, inspect clock-edge quality with appropriate test equipment, and avoid long stubs on sensitive configuration or high-speed routing paths.
Do not substitute a 7.5 ns speed-grade device for the target without reviewing timing closure. The LC4256V-75T176C and LC4256V-75T176E have 50% greater propagation delay than the LC4256V-5T176I, which can break a marginal path even when the PCB footprint is unchanged. Likewise, compare temperature suffixes and the 4000B versus 4000V family identifiers before approving a substitution.
Informations de conformité
The manufacturer product family is an industrial programmable-logic device, but no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 statement was identified for this exact MPN.