Lattice Semiconductor

LC4256V-5T176I - 227MHz 256-Macrocells CPLD | Lattice

料号: LC4256V-5T176I ✓ 量产中
3.3 V, 2.5 V, and 1.8 V Vdss 176-pin TQFP, 24 mm x 24 mm Package 227 MHz Speed
最小起订量: 1 |

LC4256V-5T176I 概述

The Lattice Semiconductor LC4256V-5T176I is a 227 MHz SuperFAST complex programmable logic device with 256 macrocells, 128 I/O pins, and a 5 ns maximum propagation delay, housed in a 176-pin TQFP package measuring 24 mm by 24 mm. It belongs to the ispMACH 4000V family and supports in-system programming for 3.3 V, 2.5 V, and 1.8 V designs.

A complex programmable logic device, commonly called a CPLD, combines programmable logic arrays with a nonvolatile configuration architecture. The LC4256V-5T176I sits in the FPGA & CPLD category, where its deterministic timing and macrocell-based logic make it useful for control logic, bus arbitration, state machines, interface adaptation, and general-purpose glue logic. Its 3 V to 3.6 V internal supply range supports systems designed around modern low-voltage digital rails.

The device provides 256 macrocells and a maximum operating frequency of 227 MHz. Its 128 dedicated I/O pins permit dense parallel interfaces without requiring an external companion device. The -5 speed grade establishes a maximum propagation delay of 5 ns, while the 176-pin TQFP surface-mount package provides adequate pin density for high-pin-count logic implementations. In-system programming allows the same PCB design to be configured or updated without removing the device.

The ispMACH 4000V architecture blends the established ispLSI 2000 and ispMACH 4A design approaches. This family-level architecture supports deterministic logic implementation through interconnected macrocells and general-purpose routing. Compared with a soft programmable logic core, a dedicated CPLD provides a physical implementation that continues operating according to its configured design without requiring an external processor or microcontroller.

Typical uses include industrial control, communications equipment, data acquisition, test and measurement, security systems, and embedded control. The 128 I/O count is useful for legacy peripheral buses and parallel control logic, while the 227 MHz performance supports demanding timing and clock-related functions. The broad I/O availability also makes the device suitable for consolidating several smaller programmable logic components.

PCB design should preserve the 176-pin TQFP land pattern, provide all required supply decoupling, and route programming and configuration signals according to the manufacturer pin-description table. Because this is a large 24 mm by 24 mm package, careful placement around fine-pitch routing and thermal-sensitive circuitry is important. Signal-integrity checks are particularly important for high-speed clock, control, and external interface routes.

This product page consolidates device specifications, package information, comparison criteria, replacement options, and practical integration guidance. It is intended to help engineers identify whether the LC4256V-5T176I fits an existing programmable-logic design before committing to a 176-pin board layout.

直接替换替代料: LC4256V-5T176I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

LC4256V-5T176C

✅ 直接替换
📦 176-pin TQFP (24 mm x 24 mm)
Commercial-temperature suffix replaces the target's industrial-temperature suffix; package, 256 macrocells, 128 I/O pins, 5 ns speed grade, and 227 MHz rating remain aligned

📋 参考替代料(不在目录中)

LC4256V-5TN176I

✅ 直接替换
📦 176-pin TQFP (24 mm x 24 mm)
Delivery or packaging arrangement differs from the target MPN while the -5 speed grade, 176-pin package, 256-macrocell device, and 227 MHz rating remain aligned

📋 参考替代料(不在目录中)

LC4256V-75T176C

✅ 直接替换
📦 176-pin TQFP (24 mm x 24 mm)
Propagation delay increases from 5 ns to 7.5 ns, a 50% increase, while the 256-macrocell architecture, 128 I/O pins, and 176-pin package remain the same

📋 参考替代料(不在目录中)

LC4256V-75T176E

✅ 直接替换
📦 176-pin TQFP (24 mm x 24 mm)
Propagation delay increases from 5 ns to 7.5 ns, a 50% increase, and the temperature suffix changes from I to E; the package and core architecture remain aligned

📋 参考替代料(不在目录中)

LC4256B-5T176I

✅ 直接替换
Lattice Semiconductor
📦 176-pin TQFP (24 mm x 24 mm)
In-system-programmable CPLD · ispMACH 4000B · 256 macrocells · 227 MHz · 5 ns · 2.5 V · 1.8 V, 2.5 V, 3.3 V · Blend of ispLSI 2000 and ispMACH 4A architectures

联系询价

查看数据手册 →

LC4256V-5T176I 最大额定值与电气特性

Device Type Complex programmable logic device
Product Family ispMACH 4000V
Architecture Blend of ispLSI 2000 and ispMACH 4A architectures
Number of Macrocells 256 macrocells
Number of Logic Elements 16 logic elements
Maximum Frequency 227 MHz
Maximum Propagation Delay 5 ns
输入电压范围 3.3 V, 2.5 V, and 1.8 V
Internal Supply Voltage Range 3 V to 3.6 V
Number of I/O Pins 128 I/O pins
Programming Type In-system programmable
封装 176-pin TQFP, 24 mm x 24 mm
安装类型 Surface mount
Logic Voltage Support 1.8 V, 2.5 V, and 3.3 V

LC4256V-5T176I 176-pin tqfp, 24 mm x 24 mm 引脚配置指南

LC4256V-5T176I(176-pin tqfp, 24 mm x 24 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

LC4256V-5T176I 的 176-pin tqfp, 24 mm x 24 mm 封装引脚图

暂无详细引脚数据: LC4256V-5T176I.

请参阅 数据手册 以查看完整引脚配置。

典型应用

LC4256V-5T176I 适用于 6 应用s: Industrial Machine Control, Communications Interface Consolidation, Data Acquisition Control, Test and Measurement Equipment, Security and Access Control, Embedded Control and Bus Arbitration.

🏭

Industrial Machine Control

The LC4256V-5T176I fits centralized machine-control logic where deterministic timing, numerous I/O points, and nonvolatile configuration are important. Its 256 macrocells can implement sequencers, interlocks, alarm logic, and motion-control interfaces, while 128 I/O pins provide ample connectivity to sensors, actuators, and legacy controller buses. The 5 ns propagation-delay specification supports tighter control paths than the 7.5 ns alternatives, and the industrial suffix suits equipment operating across extended temperature conditions. In-system programming allows configuration and diagnostics to be handled without removing the device from the assembled controller.

🌐

Communications Interface Consolidation

The LC4256V-5T176I can consolidate protocol conversion, FIFO control, framing, and arbitration logic in networking and communications equipment. Its 128 I/O pins are particularly useful for parallel legacy interfaces, while the 227 MHz operating frequency provides margin for clocked control functions. A dedicated CPLD also removes the need for a separate processor to perform simple bus arbitration or protocol translation. The 176-pin TQFP package supports dense routing on equipment boards where equivalent discrete programmable-logic components would consume excessive board area.

🖥️

Data Acquisition Control

The LC4256V-5T176I is suitable for sequencing and supervising multi-channel data-acquisition systems. Its 256 macrocells can implement trigger pipelines, sample counters, channel selectors, and interface timing, while 128 I/O pins support parallel sensor, converter, and memory connections. The 5 ns speed grade helps preserve margin in clocked control paths, and in-system programming supports configuration storage and board-level updates. Compared with the 7.5 ns alternatives, it is the preferable choice where acquisition timing margins are tight and deterministic routing is required.

🔧

Test and Measurement Equipment

The LC4256V-5T176I can implement sequencing, pattern generation, status decoding, and instrument-bus arbitration in test and measurement equipment. The 256-macrocell capacity allows multiple timing-critical functions to share one programmable device, while 128 I/O pins connect instruments, fixtures, and control boards. Its 227 MHz maximum frequency and 5 ns propagation-delay class provide useful timing margin for synchronous control. In-system programming simplifies production configuration, diagnostics, and field upgrades when instrument firmware evolves.

🎥

Security and Access Control

The LC4256V-5T176I is well suited to access-control and security equipment requiring deterministic credential-handling logic, event sequencing, alarm prioritization, and multiple peripheral interfaces. The device provides 256 macrocells and 128 I/O pins for readers, keypad scanners, displays, communication interfaces, and supervisory outputs. Its 5 ns timing class supports high-speed control functions, while nonvolatile programmable logic permits standalone operation after configuration. The 176-pin TQFP footprint also allows a compact implementation compared with multiple smaller CPLDs.

🧩

Embedded Control and Bus Arbitration

The LC4256V-5T176I can act as a dedicated bus arbiter, protocol bridge, or supervisory controller between a processor and peripheral devices. Its 128 I/O pins reduce the need for multiplexing logic, while 256 macrocells accommodate arbitration states, command decoding, error handling, and watchdog functions. The 227 MHz rating provides substantial timing headroom for synchronous processor interfaces, and the 5 ns delay specification is preferable when minimizing combinational control latency is important. In-system programming enables the logic map to be revised during product maintenance.

推荐产品汇总

LC4256V-5T176C Same-family logic device for less temperature-demanding industrial control designs 用于: Industrial Machine Control, Data Acquisition Control, Security and Access Control, Embedded Control and Bus Arbitration LC4256V-75T176C Same-footprint option for control paths that do not require the -5 speed grade 用于: Industrial Machine Control, Test and Measurement Equipment LC4256V-5TN176I Same-package alternative for communications logic assemblies with different delivery requirements 用于: Communications Interface Consolidation, Security and Access Control LC4256B-5T176I Lattice Semiconductor 用于: Communications Interface Consolidation, Test and Measurement Equipment LC4256V-75T176E Lower-speed same-package option for relaxed acquisition timing 用于: Data Acquisition Control, Embedded Control and Bus Arbitration
What are the key specifications of LC4256V-5T176I that engineers should know?
The LC4256V-5T176I is a 227 MHz CPLD with 256 macrocells, 128 I/O pins, a 5 ns maximum propagation delay, and a 176-pin TQFP package. According to the Lattice Semiconductor device documentation, it is an in-system-programmable member of the ispMACH 4000V family with support for 3.3 V, 2.5 V, and 1.8 V logic. These figures position it for dense deterministic control, interface, and bus-arbitration logic.
Where can I download the LC4256V-5T176I datasheet PDF?
The LC4256V-5T176I datasheet PDF is available from the linked document page on this product page. The manufacturer document identifies the part as a 3.3 V, 2.5 V, and 1.8 V in-system-programmable SuperFAST high-density PLD. Use the manufacturer pin-description and package tables when assigning signals and laying out the 176-pin TQFP footprint.
Where can I find the LC4256V-5T176I pinout?
The LC4256V-5T176I pinout is documented in the manufacturer datasheet associated with this product page. The device uses a 176-pin TQFP package, so all signal assignments, power pins, configuration pins, and grounds must be taken from the package-specific pin-description table. The 24 mm by 24 mm package dimensions should also be checked against the land pattern before PCB release.
Is the LC4256V-5T176I an FPGA or a CPLD?
The LC4256V-5T176I is a CPLD, specifically an in-system-programmable SuperFAST high-density PLD in the ispMACH 4000V family. According to Lattice Semiconductor documentation, its architecture blends the ispLSI 2000 and ispMACH 4A approaches. Its 256 macrocells and deterministic routing make it well suited to control logic, state machines, interface translation, and bus arbitration.
What is the LC4256V-5T176I operating voltage?
The LC4256V-5T176I supports 3.3 V, 2.5 V, and 1.8 V operation, with an internal supply range of 3 V to 3.6 V. The manufacturer describes the device as an in-system-programmable SuperFAST high-density PLD for 3.3 V, 2.5 V, and 1.8 V designs. Confirm the exact core and I/O voltage arrangement against the datasheet before connecting external logic.
How many I/O pins and macrocells does the LC4256V-5T176I have?
The LC4256V-5T176I provides 128 I/O pins and 256 macrocells. The 176-pin TQFP therefore combines 128 user-facing I/O positions with the additional package positions required for power, ground, and configuration functions. This high pin count allows the device to replace several smaller programmable-logic components in parallel-interface and embedded-control designs.
What is the maximum frequency of the LC4256V-5T176I?
The LC4256V-5T176I has a maximum operating frequency of 227 MHz and belongs to the -5 speed grade with a 5 ns maximum propagation delay. According to the Lattice Semiconductor device description, these characteristics identify it as a high-speed option within the ispMACH 4000V family. Actual system timing must also account for routing, external clock uncertainty, and I/O constraints.
LC4256V-5T176I vs LC4256V-75T176C - which is better for high-speed logic?
The LC4256V-5T176I is the better choice when maximum speed is the priority because it is specified at 227 MHz with a 5 ns propagation delay, while the LC4256V-75T176C is a 7.5 ns speed grade. Both are 256-macrocell ispMACH 4000V devices in the 176-pin TQFP package. The LC4256V-5T176I also carries the industrial suffix, making it appropriate when both speed and industrial temperature qualification are required.
Can LC4256V-5T176I replace LC4256V-5TN176I?
The LC4256V-5TN176I is an extremely close same-package option for the LC4256V-5T176I because both use the 176-pin TQFP package and the -5 speed designation. The distinguishing suffix is the device's delivery or packaging arrangement, so engineers should confirm ordering requirements and mechanical fit before substitution. The electrical performance remains centered on the same 256-macrocell, 227 MHz ispMACH 4000V implementation.
When should I choose LC4256V-5T176I over LC4256V-10T176I?
Choose the LC4256V-5T176I when timing margin is more important than unit cost or design simplicity. Its 227 MHz maximum frequency and 5 ns propagation delay are approximately 82% faster than the 125 MHz and 10 ns ratings associated with the LC4256V-10T176I. Both devices use the same 176-pin TQFP footprint, but the -10 grade is more appropriate when the slower speed grade satisfies the design.
What is the best drop-in replacement for LC4256V-5T176I?
The LC4256V-5T176C is the closest same-footprint alternative because it retains the 256-macrocell ispMACH 4000V architecture, 176-pin TQFP package, 128 I/O pins, and 5 ns speed designation. Its commercial-temperature suffix differs from the industrial suffix on the target. Use the LC4256V-5T176I when the industrial qualification and documented operating-temperature range are required.
Is LC4256V-5T176I suitable for industrial control systems?
The LC4256V-5T176I is suitable for industrial control applications because the I suffix identifies the industrial-temperature version, while the device offers 256 macrocells, 128 I/O pins, and a 227 MHz maximum frequency. Its in-system-programmable architecture supports configuration and updates within an assembled system, and its broad I/O count is valuable for legacy bus and machine-control interfaces.
Is the LC4256V-5T176I the same as LC4256B-5T176I?
The LC4256V-5T176I and LC4256B-5T176I are closely related 176-pin ispMACH 4000-class CPLDs with the same -5 speed designation, but they belong to different family identifiers and should not be treated as automatically identical. The LC4256V part is specified at 227 MHz with 256 macrocells and 128 I/O pins. Confirm device revision, power-up behavior, configuration details, and qualification before using the B variant as a drop-in substitute.
Where can I buy LC4256V-5T176I online?
Use the Request a Quote form on this page to request LC4256V-5T176I availability, current commercial terms, and lot-level sourcing support. The form is the appropriate channel for quote-based procurement and avoids tying the request to a static distributor listing. Include the required quantity, package handling preference, and target delivery schedule so the sourcing request can be processed accurately.
What is the price of LC4256V-5T176I?
The current commercial price of LC4256V-5T176I is returned through the Request a Quote form on this page. The quote should reflect the requested quantity, delivery schedule, and packaging requirement. Because programmable-device pricing can vary with volume and supply status, request a current quotation instead of relying on an outdated historical unit price.
What is the lead time and stock status for LC4256V-5T176I?
Current stock, minimum order quantity, and lead time for LC4256V-5T176I should be confirmed through the Request a Quote form on this page. Submit the required quantity and target delivery date to obtain a procurement response. The 176-pin TQFP format is supported by the device documentation, but current component allocation should not be inferred from historical catalog availability.
How do I design the LC4256V-5T176I power and programming connections?
Connect the LC4256V-5T176I strictly according to the manufacturer power-pin and configuration-pin tables in the datasheet. The device supports 3.3 V, 2.5 V, and 1.8 V logic operation and has an internal supply range of 3 V to 3.6 V. Place decoupling capacitors close to the relevant supply pins, provide a stable configuration path, and verify all signal directions and voltage domains against the package pinout.

工程参考数据: LC4256V-5T176I ——对比、设计指导和合规信息。

选型指南

Choose the LC4256V-5T176I for a 176-pin TQFP design that needs the -5 speed grade, 227 MHz maximum frequency, 256 macrocells, and industrial-temperature designation. It is the strongest option when timing margin is tight or the system must operate across an extended industrial temperature range. Select the LC4256V-5T176C when the identical speed and package are sufficient but commercial-temperature operation is appropriate. The LC4256V-5TN176I provides the same core architecture and speed alignment when its delivery configuration matches the assembly plan. Consider the LC4256V-75T176C or LC4256V-75T176E only after verifying that the 50% increase from 5 ns to 7.5 ns preserves timing closure. The LC4256B-5T176I offers a related family and footprint, but family-specific configuration, revision, and qualification details require verification before production use.

与替代料对比

参数 本产品 LC4256V-5T176C LC4256V-5TN176I LC4256V-75T176C LC4256V-75T176E LC4256B-5T176I
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Package 176-pin TQFP (24 mm x 24 mm) 176-pin TQFP (24 mm x 24 mm) 176-pin TQFP (24 mm x 24 mm) 176-pin TQFP (24 mm x 24 mm) 176-pin TQFP (24 mm x 24 mm) 176-pin TQFP (24 mm x 24 mm)
Product Family ispMACH 4000V ispMACH 4000V ispMACH 4000V ispMACH 4000V ispMACH 4000V ispMACH 4000B
Temperature Suffix I C I C E I

关键差异点

  • Faster propagation-delay class (对比 LC4256V-75T176C)
  • Industrial-temperature designation (对比 LC4256V-5T176C)
  • Same-family architecture with direct package reuse (对比 LC4256B-5T176I)
  • Higher timing headroom than slower 4000V option (对比 LC4256V-10T176I)

设计说明

Use the 176-pin TQFP land pattern from the manufacturer package drawing and verify pin 1 orientation against the PCB silkscreen before fabrication. The package occupies 24 mm by 24 mm and has a dense perimeter pitch, so small assembly-placement errors can create solder bridges or incorrect connections. Preserve component clearance around all four sides and provide adequate space for the reflow profile and inspection.

Decouple each applicable supply rail at the device pins and follow the manufacturer pin table for core and I/O supply connections. The LC4256V-5T176I supports 1.8 V, 2.5 V, and 3.3 V logic arrangements, but those figures describe supported voltage options rather than permission to combine rails arbitrarily. Check voltage-domain sequencing and external driver levels before attaching powered peripherals to the device.

Route clocks, configuration signals, and high-fanout control nets away from noisy switching-power regions and keep return paths continuous. The 227 MHz device rating describes logic capability, not a guarantee of acceptable board-level signal integrity. Add source-series termination where driver loading requires it, inspect clock-edge quality with appropriate test equipment, and avoid long stubs on sensitive configuration or high-speed routing paths.

Do not substitute a 7.5 ns speed-grade device for the target without reviewing timing closure. The LC4256V-75T176C and LC4256V-75T176E have 50% greater propagation delay than the LC4256V-5T176I, which can break a marginal path even when the PCB footprint is unchanged. Likewise, compare temperature suffixes and the 4000B versus 4000V family identifiers before approving a substitution.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The manufacturer product family is an industrial programmable-logic device, but no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 statement was identified for this exact MPN.

相关搜索

lc4256v datasheet LC4256V-5T176I datasheet LC4256V-5T176I datasheet pdf LC4256V-5T176I pinout LC4256V-5T176I specifications LC4256V-5T176I price LC4256V-5T176I stock Lattice LC4256V-5T176I LC4256V-5T176I equivalent LC4256V-5T176I replacement LC4256V-5T176I vs LC4256V-75T176C LC4256V-5T176I 176 pin TQFP LC4256V-5T176I 227 MHz CPLD LC4256V-5T176I industrial control LC4256V-5T176I footprint

相关元器件 & 术语

Lattice Semiconductor LC4256V-5T176I LC4256V-5T176C LC4256V-5TN176I LC4256V-75T176C LC4256V-75T176E LC4256B-5T176I ispMACH 4000V ispMACH 4000B CPLD complex programmable logic device FPGA programmable logic macrocell in-system programming SuperFAST TQFP-176 surface-mount package 227 MHz 5 ns propagation delay 256 macrocells 128 I/O pins 3.3 V 2.5 V 1.8 V industrial control bus arbitration
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情