LFE2-70E-5F672I - 68K ECP2 FPGA, 500 I/O | Lattice
Référence : LFE2-70E-5F672I ✗ Fin de vieLFE2-70E-5F672I Présentation
An FPGA is a programmable semiconductor whose digital circuits are defined through a configuration bitstream rather than fixed mask programming. ECP2 devices belong to the configurable logic block, or FPGA, category and sit within the broader programmable-logic hierarchy. They combine look-up-table-based logic, programmable interconnect, block memory, distributed RAM, digital I/O, and dedicated functions such as PLL-based clock management. This makes an ECP2 useful when several interface protocols or control paths must be consolidated into one device.
The principal feature of the LFE2-70E-5F672I is its combination of 68,000 logic elements and 500 user I/O in one 672-ball package. The device provides 1,056,768 bits of distributed RAM and 8,500 LABs, while its maximum stated clock speed is 500 MHz. The 672-pin FBGA arrangement supports designs requiring substantial parallel connectivity, including industrial control, communications, instrumentation, test equipment, and embedded video or data-acquisition systems.
Technically, the part uses a 1.2 V core and 90 nm process technology. The 500 MHz figure represents the stated device speed grade rather than a guarantee that every user logic path can operate at that rate. Actual timing depends on architecture, interconnect routing, clock constraints, I/O standards, loading, and the selected ECP2 design tools. Designers should evaluate the complete design with timing analysis and verify the package-specific pin assignments before layout release.
Typical applications include industrial data acquisition, motion and machine control, communications infrastructure, test-and-measurement systems, embedded processing peripherals, and high-channel-count programmable I/O. The 500 I/O capability is especially useful for parallel sensor aggregation, memory interfaces, clocking, high-speed serial links, and mixed external interfaces. Its 1,056,768 bits of distributed RAM can support packet buffering, data formatting, lookup tables, and local storage close to the logic that consumes the data.
A critical design consideration is that the 672-ball FBGA requires careful ball assignment, power distribution, and escape-routing planning. Assign power, ground, configuration, and clock resources according to the manufacturer package guidelines, then check every ball against the pinout and power-decoupling recommendations in the ECP2 documentation. Leave adequate clearance between the BGA escape paths and sensitive interfaces.
This page consolidates the part identity, core ECP2 resources, package constraints, drop-in ordering alternatives, and practical design guidance. It helps engineers compare the industrial suffix, speed grade, package, and legacy status before committing a new multi-layer PCB or production program.
Alternatives de remplacement direct pour LFE2-70E-5F672I — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
LFE2-70E-5FN672I
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
LFE2-70E-5F672C
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →LFE2-70E-5FN672C
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
LFE2-70E-5F672I Valeurs maximales et caractéristiques électriques
| Device Type | ECP2 Field Programmable Gate Array (FPGA) |
| Logic Elements | 68,000 logic elements |
| Logic Array Blocks | 8,500 LABs |
| Macrocells | 10,567 macrocells |
| Maximum Clock Speed | 500 MHz |
| Core Supply Voltage | 1.2 V |
| Process Technology | 90 nm |
| Distributed RAM | 1,056,768 bits |
| User I/O | 500 user I/O |
| Boîtier | 672-pin FBGA |
| Total Terminals | 672 terminals |
| Package Shape | Square BGA |
| Temperature Grade | Industrial |
| Terminal Form | Ball |
| Type de montage | Surface Mount |
| Programmable Logic Type | SRAM-configurable FPGA |
Guide de configuration des broches du LFE2-70E-5F672I square bga
Configuration des broches du LFE2-70E-5F672I (boîtier square bga). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour LFE2-70E-5F672I.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
LFE2-70E-5F672I convient pour 6 applications: Industrial Data Acquisition, Programmable Machine Control, Communications Interface Consolidation, Test and Measurement Instrumentation, Embedded Video Processing, Aerospace and Defense Test Equipment.
Industrial Data Acquisition
The LFE2-70E-5F672I fits high-channel-count acquisition systems because it provides 500 user I/O alongside 68,000 logic elements and 1,056,768 bits of distributed RAM. Parallel sensor inputs can be sampled, filtered, thresholded, and timestamped inside the FPGA while local RAM buffers data between slower processing stages. The 500 MHz stated device speed supports clocked acquisition and control pipelines, although achieved throughput depends on routing and I/O timing. A 672-pin FBGA also provides enough balls for multiple buses and supply domains, but the layout must follow the exact ECP2 ball map and power grid.
Recommandé
Programmable Machine Control
The LFE2-70E-5F672I is appropriate for machine-control logic that coordinates sensors, actuators, interlocks, and motion sequences in one programmable device. Its 68,000 logic elements can implement substantial control state machines, while 500 user I/O reduces the need for external logic glue. The 1,056,768 bits of distributed RAM can support local buffering, lookup functions, and timing histories close to the control logic. Designers should reserve deterministic clocking resources, isolate safety-related paths, and confirm the device's exact operating-temperature range before deploying it in industrial machinery.
Recommandé
Communications Interface Consolidation
The LFE2-70E-5F672I can consolidate multiple communication interfaces because 500 user I/O provides ample parallel connectivity and 68,000 logic elements support protocol state machines, framing, and data routing. Distributed RAM can hold packet descriptors, FIFOs, and classification tables, while the stated 500 MHz speed enables timing-critical digital logic. The 672-pin FBGA is suitable for a board combining high-speed serial links with legacy parallel buses. Final feasibility depends on the selected I/O standards, clock topology, voltage requirements, and timing closure in the selected ECP2 device variant.
Recommandé
Test and Measurement Instrumentation
The LFE2-70E-5F672I fits modular test and measurement equipment requiring dense control logic and flexible I/O. Its 500 user I/O can accommodate pattern generators, capture interfaces, status signals, and instrument control, while 68,000 logic elements support sequencing, analysis, and protocol conversion. Distributed RAM can provide sample windows and trigger history, and the 500 MHz stated clock can support fast digital test functions. For precision analog measurement, the FPGA should control separate converters rather than replace their analog front ends; clock jitter, grounding, and analog isolation remain system-level considerations.
Recommandé
Embedded Video Processing
The LFE2-70E-5F672I can support embedded video preprocessing by combining parallel pixel-domain logic, line buffers, and control functions in a single ECP2 device. Its 1,056,768 bits of distributed RAM provide local storage for timing references and small data paths, while 500 I/O can connect sensors, memory, displays, and control processors. The 500 MHz stated speed is useful for synchronous pixel processing, but actual line-rate performance depends on I/O standards, memory resources, and routing congestion. Because the device is obsolete, new video products should also evaluate the lifecycle risk of the platform and its configuration toolchain.
Recommandé
Aerospace and Defense Test Equipment
The LFE2-70E-5F672I may fit legacy aerospace and defense test equipment where an established ECP2 bitstream, dense I/O, and substantial configurable logic are required. The 68,000 logic elements and 500 user I/O support channel control, pattern sequencing, and interface aggregation, while distributed RAM supports local test-data handling. Its industrial temperature grade must not be interpreted as aerospace or defense qualification. Before use in flight hardware, verify the exact device qualification status, operating-temperature range, screening requirements, and radiation expectations through the manufacturer and program-specific documentation.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour LFE2-70E-5F672I — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | LFE2-70E-5FN672I | LFE2-70E-5F672C | LFE2-70E-5FN672C |
|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 672-pin FBGA | 672-pin FBGA | 672-pin FBGA | 672-pin FBGA |
| Device Family | LFE2-70E ECP2 | LFE2-70E ECP2 | LFE2-70E ECP2 | LFE2-70E ECP2 |
| Ordering Suffix | I suffix | N and I suffixes | C suffix | N and C suffixes |
Principaux différenciateurs
- Matches the documented 68,000-cell resource class and 672-ball format of the listed ECP2 alternatives (vs LFE2-70E-5FN672I)
- Retains the same ECP2 logic and I/O resource envelope while changing only the documented ordering code (vs LFE2-70E-5F672C)
- Offers 500 user I/O and 1,056,768 bits of distributed RAM for interface-dense legacy logic consolidation (vs LFE2-70E-5FN672C)
Notes de conception
Begin the 672-ball layout with the exact LFE2-70E package drawing and power-grid assignment rather than a generic BGA escape pattern. Reserve supply and ground balls first, place the required decoupling network directly at the relevant balls, and route user I/O according to the selected I/O standard. The 500 I/O count makes layer congestion and via access important constraints. A differential-pair review, length matching, return-path continuity check, and fabrication stack-up review should be completed before Gerber release.
Separate clocks, high-speed interfaces, configuration paths, and sensitive inputs as early as possible in the floorplan. Use continuous reference planes and avoid crossing power-region boundaries with critical traces. The 500 MHz stated device speed does not determine I/O edge rates by itself; those depend on the selected I/O standard and external circuitry. Run signal-integrity simulation for impedance-controlled nets and verify timing with all speed, loading, and voltage assumptions applied.
Design the 672-pin FBGA around the final board stack-up, copper density, airflow, and I/O activity because no universal heatsink requirement can be inferred from the package name. Provide a continuous ground reference under the device where the package design permits, spread high-current connections across multiple power balls, and follow the manufacturer decoupling guidance. Estimated: thermal performance must be evaluated from calculated FPGA power and the package-to-ambient thermal model for the assembled PCB rather than from the 500 MHz headline frequency alone.
Do not treat an ECP2 family member with the same 672-ball count as a guaranteed drop-in replacement. Check the ordering suffix, package outline, ball map, temperature grade, speed grade, I/O standards, configuration interface, and electrical limits. The LFE2-70E-5FN672I, LFE2-70E-5F672C, and LFE2-70E-5FN672C are comparison candidates, but each requires formal review against the exact manufacturer ordering and package documents.
Informations de conformité
The exact product information identifies an industrial-grade ECP2 FPGA but does not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, AEC-Q100, or other qualification status. Confirm environmental and program-specific requirements before procurement.