LFE2-70E-5F672I - 68K ECP2 FPGA, 500 I/O | Lattice
部品番号: LFE2-70E-5F672I ✗ 生産終了LFE2-70E-5F672I 概要
An FPGA is a programmable semiconductor whose digital circuits are defined through a configuration bitstream rather than fixed mask programming. ECP2 devices belong to the configurable logic block, or FPGA, category and sit within the broader programmable-logic hierarchy. They combine look-up-table-based logic, programmable interconnect, block memory, distributed RAM, digital I/O, and dedicated functions such as PLL-based clock management. This makes an ECP2 useful when several interface protocols or control paths must be consolidated into one device.
The principal feature of the LFE2-70E-5F672I is its combination of 68,000 logic elements and 500 user I/O in one 672-ball package. The device provides 1,056,768 bits of distributed RAM and 8,500 LABs, while its maximum stated clock speed is 500 MHz. The 672-pin FBGA arrangement supports designs requiring substantial parallel connectivity, including industrial control, communications, instrumentation, test equipment, and embedded video or data-acquisition systems.
Technically, the part uses a 1.2 V core and 90 nm process technology. The 500 MHz figure represents the stated device speed grade rather than a guarantee that every user logic path can operate at that rate. Actual timing depends on architecture, interconnect routing, clock constraints, I/O standards, loading, and the selected ECP2 design tools. Designers should evaluate the complete design with timing analysis and verify the package-specific pin assignments before layout release.
Typical applications include industrial data acquisition, motion and machine control, communications infrastructure, test-and-measurement systems, embedded processing peripherals, and high-channel-count programmable I/O. The 500 I/O capability is especially useful for parallel sensor aggregation, memory interfaces, clocking, high-speed serial links, and mixed external interfaces. Its 1,056,768 bits of distributed RAM can support packet buffering, data formatting, lookup tables, and local storage close to the logic that consumes the data.
A critical design consideration is that the 672-ball FBGA requires careful ball assignment, power distribution, and escape-routing planning. Assign power, ground, configuration, and clock resources according to the manufacturer package guidelines, then check every ball against the pinout and power-decoupling recommendations in the ECP2 documentation. Leave adequate clearance between the BGA escape paths and sensitive interfaces.
This page consolidates the part identity, core ECP2 resources, package constraints, drop-in ordering alternatives, and practical design guidance. It helps engineers compare the industrial suffix, speed grade, package, and legacy status before committing a new multi-layer PCB or production program.
ドロップイン代替品: LFE2-70E-5F672I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
LFE2-70E-5FN672I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
LFE2-70E-5F672C
✅ ドロップイン価格はお問い合わせください
データシートを見る →LFE2-70E-5FN672C
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
LFE2-70E-5F672I 最大定格&電気的特性
| Device Type | ECP2 Field Programmable Gate Array (FPGA) |
| Logic Elements | 68,000 logic elements |
| Logic Array Blocks | 8,500 LABs |
| Macrocells | 10,567 macrocells |
| Maximum Clock Speed | 500 MHz |
| Core Supply Voltage | 1.2 V |
| Process Technology | 90 nm |
| Distributed RAM | 1,056,768 bits |
| User I/O | 500 user I/O |
| パッケージ | 672-pin FBGA |
| Total Terminals | 672 terminals |
| Package Shape | Square BGA |
| Temperature Grade | Industrial |
| Terminal Form | Ball |
| 実装タイプ | Surface Mount |
| Programmable Logic Type | SRAM-configurable FPGA |
LFE2-70E-5F672I square bga ピン配置ガイド
LFE2-70E-5F672I (square bga パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: LFE2-70E-5F672I.
詳細は データシート をご参照ください。
主な用途
LFE2-70E-5F672I の用途: 6 件s: Industrial Data Acquisition, Programmable Machine Control, Communications Interface Consolidation, Test and Measurement Instrumentation, Embedded Video Processing, Aerospace and Defense Test Equipment.
Industrial Data Acquisition
The LFE2-70E-5F672I fits high-channel-count acquisition systems because it provides 500 user I/O alongside 68,000 logic elements and 1,056,768 bits of distributed RAM. Parallel sensor inputs can be sampled, filtered, thresholded, and timestamped inside the FPGA while local RAM buffers data between slower processing stages. The 500 MHz stated device speed supports clocked acquisition and control pipelines, although achieved throughput depends on routing and I/O timing. A 672-pin FBGA also provides enough balls for multiple buses and supply domains, but the layout must follow the exact ECP2 ball map and power grid.
おすすめ
Programmable Machine Control
The LFE2-70E-5F672I is appropriate for machine-control logic that coordinates sensors, actuators, interlocks, and motion sequences in one programmable device. Its 68,000 logic elements can implement substantial control state machines, while 500 user I/O reduces the need for external logic glue. The 1,056,768 bits of distributed RAM can support local buffering, lookup functions, and timing histories close to the control logic. Designers should reserve deterministic clocking resources, isolate safety-related paths, and confirm the device's exact operating-temperature range before deploying it in industrial machinery.
おすすめ
Communications Interface Consolidation
The LFE2-70E-5F672I can consolidate multiple communication interfaces because 500 user I/O provides ample parallel connectivity and 68,000 logic elements support protocol state machines, framing, and data routing. Distributed RAM can hold packet descriptors, FIFOs, and classification tables, while the stated 500 MHz speed enables timing-critical digital logic. The 672-pin FBGA is suitable for a board combining high-speed serial links with legacy parallel buses. Final feasibility depends on the selected I/O standards, clock topology, voltage requirements, and timing closure in the selected ECP2 device variant.
おすすめ
Test and Measurement Instrumentation
The LFE2-70E-5F672I fits modular test and measurement equipment requiring dense control logic and flexible I/O. Its 500 user I/O can accommodate pattern generators, capture interfaces, status signals, and instrument control, while 68,000 logic elements support sequencing, analysis, and protocol conversion. Distributed RAM can provide sample windows and trigger history, and the 500 MHz stated clock can support fast digital test functions. For precision analog measurement, the FPGA should control separate converters rather than replace their analog front ends; clock jitter, grounding, and analog isolation remain system-level considerations.
おすすめ
Embedded Video Processing
The LFE2-70E-5F672I can support embedded video preprocessing by combining parallel pixel-domain logic, line buffers, and control functions in a single ECP2 device. Its 1,056,768 bits of distributed RAM provide local storage for timing references and small data paths, while 500 I/O can connect sensors, memory, displays, and control processors. The 500 MHz stated speed is useful for synchronous pixel processing, but actual line-rate performance depends on I/O standards, memory resources, and routing congestion. Because the device is obsolete, new video products should also evaluate the lifecycle risk of the platform and its configuration toolchain.
おすすめ
Aerospace and Defense Test Equipment
The LFE2-70E-5F672I may fit legacy aerospace and defense test equipment where an established ECP2 bitstream, dense I/O, and substantial configurable logic are required. The 68,000 logic elements and 500 user I/O support channel control, pattern sequencing, and interface aggregation, while distributed RAM supports local test-data handling. Its industrial temperature grade must not be interpreted as aerospace or defense qualification. Before use in flight hardware, verify the exact device qualification status, operating-temperature range, screening requirements, and radiation expectations through the manufacturer and program-specific documentation.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: LFE2-70E-5F672I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | LFE2-70E-5FN672I | LFE2-70E-5F672C | LFE2-70E-5FN672C |
|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 672-pin FBGA | 672-pin FBGA | 672-pin FBGA | 672-pin FBGA |
| Device Family | LFE2-70E ECP2 | LFE2-70E ECP2 | LFE2-70E ECP2 | LFE2-70E ECP2 |
| Ordering Suffix | I suffix | N and I suffixes | C suffix | N and C suffixes |
主な差別化要因
- Matches the documented 68,000-cell resource class and 672-ball format of the listed ECP2 alternatives (vs LFE2-70E-5FN672I)
- Retains the same ECP2 logic and I/O resource envelope while changing only the documented ordering code (vs LFE2-70E-5F672C)
- Offers 500 user I/O and 1,056,768 bits of distributed RAM for interface-dense legacy logic consolidation (vs LFE2-70E-5FN672C)
設計ノート
Begin the 672-ball layout with the exact LFE2-70E package drawing and power-grid assignment rather than a generic BGA escape pattern. Reserve supply and ground balls first, place the required decoupling network directly at the relevant balls, and route user I/O according to the selected I/O standard. The 500 I/O count makes layer congestion and via access important constraints. A differential-pair review, length matching, return-path continuity check, and fabrication stack-up review should be completed before Gerber release.
Separate clocks, high-speed interfaces, configuration paths, and sensitive inputs as early as possible in the floorplan. Use continuous reference planes and avoid crossing power-region boundaries with critical traces. The 500 MHz stated device speed does not determine I/O edge rates by itself; those depend on the selected I/O standard and external circuitry. Run signal-integrity simulation for impedance-controlled nets and verify timing with all speed, loading, and voltage assumptions applied.
Design the 672-pin FBGA around the final board stack-up, copper density, airflow, and I/O activity because no universal heatsink requirement can be inferred from the package name. Provide a continuous ground reference under the device where the package design permits, spread high-current connections across multiple power balls, and follow the manufacturer decoupling guidance. Estimated: thermal performance must be evaluated from calculated FPGA power and the package-to-ambient thermal model for the assembled PCB rather than from the 500 MHz headline frequency alone.
Do not treat an ECP2 family member with the same 672-ball count as a guaranteed drop-in replacement. Check the ordering suffix, package outline, ball map, temperature grade, speed grade, I/O standards, configuration interface, and electrical limits. The LFE2-70E-5FN672I, LFE2-70E-5F672C, and LFE2-70E-5FN672C are comparison candidates, but each requires formal review against the exact manufacturer ordering and package documents.
コンプライアンス情報
The exact product information identifies an industrial-grade ECP2 FPGA but does not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, AEC-Q100, or other qualification status. Confirm environmental and program-specific requirements before procurement.