Texas Instruments

LM224J/NOPB - 4-Op-Amp, 1MHz, 14-CDIP | Texas Instruments

Référence : LM224J/NOPB ✓ Actif
3 V to 32 V Vdss 14-CDIP (0.300 in, 7.62 mm) Package
MOQ : 1 |

LM224J/NOPB Présentation

Texas Instruments LM224J/NOPB is a four-circuit general-purpose operational amplifier with a 1 MHz gain-bandwidth product, 0.5 V/µs slew rate, and internal frequency compensation, supplied in a 14-CDIP package. It operates from a single supply or split supply over a 3 V to 32 V range and is designed for instrumentation, sensor conditioning, and low-frequency signal-processing applications.

An operational amplifier is an analog signal-processing IC that uses high open-loop gain to amplify voltage differences. The LM224 belongs to the operational-amplifier hierarchy within analog and mixed-signal semiconductors. Four independent amplifiers are integrated into one package, allowing a circuit to perform gain, buffering, comparison, summation, filtering, and transducer-signal conditioning without using four separate packages.

The LM224 combines four general-purpose amplifiers with low-power operation, internally compensated closed-loop stability, and support for both single- and split-supply systems. Its 1 MHz gain-bandwidth product is suitable for audio-frequency and general instrumentation tasks, while its 0.5 V/µs slew rate limits large-signal performance in fast transient applications. The 14-CDIP package provides through-hole mounting for conventional industrial and laboratory boards.

Each of the four circuits has independent input, output, and power connections, while the common supply architecture permits operation from a single rail or from positive and negative rails. Internal frequency compensation removes the need for an external dominant-pole capacitor in the standard closed-loop configurations. Engineers can therefore use stable unity-gain voltage-follower, non-inverting, and inverting amplifier arrangements without redesigning compensation networks.

Typical uses include low-frequency sensor signal conditioning, process-control instrumentation, audio preamplification, active filtering, data acquisition, and general test equipment. The same quad-amplifier organization allows one package to implement several stages, reducing component count and simplifying interstage routing on a through-hole circuit board.

When designing around the LM224J/NOPB, verify input and output common-mode limits for the selected supply voltage, maintain the required output-current margin, and include suitable bypassing close to the supply pins. The 1 MHz bandwidth and 0.5 V/µs slew rate make it more appropriate for low-frequency precision conditioning than for wideband video, RF, or high-speed data acquisition.

This product record combines package, electrical, application, replacement, and engineering guidance in one place. It also identifies the distinction between electrically compatible quad amplifiers and true same-package drop-in choices, helping engineers evaluate PCB reuse, supply compatibility, temperature grade, and signal-bandwidth requirements before releasing a replacement into production.

Alternatives de remplacement direct pour LM224J/NOPB — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec LM224J/NOPB (même facteur de forme et même empreinte) — différant par Compensation, Mounting Type, Package.

Texas Instruments
Compensation: Internally Frequency Compensated
Mounting Type: Through Hole
Package: 14-CDIP, 0.300 inch, 7.62 mm pitch

LM224N/NOPB

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 14-CDIP (0.300 in, 7.62 mm)
Same LM224 four-amplifier architecture and 14-CDIP footprint; ordering-code temperature and marking details must be compared

📋 Alternative de référence (hors catalogue)

LM124J/NOPB

✅ Remplacement direct
📦 14-CDIP (0.300 in, 7.62 mm)
Same 4 circuits, 14-CDIP footprint, and 1 MHz-class architecture; temperature grade and bias-current specifications differ

📋 Alternative de référence (hors catalogue)

LM324J/NOPB

✅ Remplacement direct
📦 14-CDIP (0.300 in, 7.62 mm)
Same 4 circuits, 14-CDIP footprint, and 1 MHz-class architecture; commercial temperature grading differs from LM224

📋 Alternative de référence (hors catalogue)

LM224J

✅ Remplacement direct
Texas Instruments
📦 14-CDIP (0.300 in, 7.62 mm)
General Purpose · 4 circuits · Voltage Feedback · Internally Frequency Compensated · 32 V · Single or Split Supply · 1 MHz · 1.2 MHz

Contactez-nous pour le prix

Voir la fiche technique →

LM224J

✅ Remplacement direct
Texas Instruments
📦 14-CDIP (0.300 in, 7.62 mm)
General Purpose · 4 circuits · Voltage Feedback · Internally Frequency Compensated · 32 V · Single or Split Supply · 1 MHz · 1.2 MHz

Contactez-nous pour le prix

Voir la fiche technique →

LM224J/NOPB Valeurs maximales et caractéristiques électriques

Amplifier Type General Purpose
Number of Circuits 4 circuits
Gain-Bandwidth Product 1 MHz
Slew Rate 0.5 V/µs
Supply Voltage Range 3 V to 32 V
Supply Configuration Single or split supply
Compensation Internal frequency compensation
Open-Loop Gain High gain
Power Consumption Low power
Boîtier 14-CDIP (0.300 in, 7.62 mm)
Packaging Tube
Type de montage Through-hole

Guide de configuration des broches du LM224J/NOPB 14-cdip (0.300 in, 7.62 mm)

Configuration des broches du LM224J/NOPB (boîtier 14-cdip (0.300 in, 7.62 mm)). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 14-cdip (0.300 in, 7.62 mm) pour le LM224J/NOPB

Aucune donnée de brochage détaillée disponible pour LM224J/NOPB.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

LM224J/NOPB convient pour 6 applications: Industrial Sensor Signal Conditioning, Audio Preamplifier and Mixer, Process Control Instrumentation, Data Acquisition Front End, Active Filtering and Equalization, Power Supply Monitoring and Control.

🏭

Industrial Sensor Signal Conditioning

The LM224J/NOPB is well suited to conditioning low-frequency industrial sensor signals because it integrates four general-purpose amplifiers with a 1 MHz gain-bandwidth product and internal frequency compensation. Two stages can amplify and buffer a transducer output, while the remaining channels perform active filtering or level shifting. The 3 V to 32 V supply range supports conventional industrial rails, although each input must remain inside the amplifier’s common-mode limits. The 14-CDIP package is particularly useful for repair and expansion of legacy through-hole control boards.

🎧

Audio Preamplifier and Mixer

The LM224J/NOPB can implement several low-frequency audio stages in one 14-CDIP package. Its four independently configured amplifiers support microphone preamplification, volume control, active equalization, and summing without requiring four separate ICs. The 1 MHz gain-bandwidth product covers conventional audio-band circuitry, while the 0.5 V/µs slew rate should be checked against the largest required signal swing and load. Internal frequency compensation makes standard non-inverting and inverting stages straightforward, provided feedback and grounding are laid out carefully.

⚡

Process Control Instrumentation

The LM224J/NOPB fits process-control signal paths that operate over a wide supply range and require several precision amplifier functions. Its four circuits can support current-to-voltage conversion, error amplification, active filtering, and output buffering within one package. The 3 V to 32 V capability accommodates many 24 V industrial systems, while the 1 MHz bandwidth is more than adequate for most slow process variables. Designers should still verify common-mode range, output drive, thermal conditions, and isolation requirements before connecting the amplifier to field wiring.

🖥️

Data Acquisition Front End

The LM224J/NOPB can form the analog front end of a low-frequency data-acquisition system by providing differential or single-ended gain stages, anti-alias filtering, and output buffering. Four independent amplifiers allow several channels to share one package, reducing board area and simplifying routing on a through-hole design. The internal compensation supports stable closed-loop operation, and the 1 MHz gain-bandwidth product covers signals well below high-speed sampling requirements. The main design limits are input offset, bias current, common-mode range, and the need to keep the output within the selected supply’s linear range.

🔧

Active Filtering and Equalization

The LM224J/NOPB is appropriate for first- and second-order active filters operating well below its 1 MHz gain-bandwidth limit. Four amplifiers can implement multiple filter sections, instrumentation stages, or programmable equalizer paths in a single package. Internal frequency compensation simplifies unity-gain and standard feedback configurations, while the 0.5 V/µs slew rate supports ordinary audio and control-frequency waveforms. Component tolerances and output loading should be checked when defining gain and cutoff accuracy, and power-supply bypassing should be placed close to the package.

🔋

Power Supply Monitoring and Control

The LM224J/NOPB can monitor and control low-frequency power-system signals using up to four amplifiers for sensing, filtering, comparison, and error amplification. Its 3 V to 32 V supply range permits operation in 5 V, 12 V, and 24 V systems, but the amplifier inputs and outputs cannot automatically be assumed to tolerate the full supply voltage. The 1 MHz bandwidth is suitable for slow feedback loops rather than high-frequency compensation. Confirm source impedance, output current, fault behavior, and isolation requirements in the final power-control circuit.

What are the key specifications of LM224J/NOPB that engineers should know?
The LM224J/NOPB is a four-circuit general-purpose operational amplifier with a 1 MHz gain-bandwidth product, 0.5 V/µs slew rate, and 14-CDIP package. According to the manufacturer LM224 product information, it operates from a single supply or split supply over a 3 V to 32 V range and uses internal frequency compensation. These characteristics make it suitable for low-frequency instrumentation, sensor conditioning, buffering, and active-filter circuits rather than high-speed signal chains.
Where can I download the LM224J datasheet PDF?
The official LM224J/NOPB technical information is available through the Texas Instruments LM224 product page at https://www.ti.com/product/LM224. The manufacturer page provides the authoritative electrical characteristics, ordering information, and datasheet access for the LM224 family. The LM224J is ordered in a 14-CDIP tube package, while the suffix /NOPB identifies the lead-free, standard environmental package configuration.
Where can I find the LM224J pinout and 14-CDIP connection diagram?
Use the pin-description table and package drawing in the Texas Instruments LM224 datasheet for the authoritative LM224J pinout. The LM224J is a 14-pin CDIP containing four independent operational amplifiers. Because the verified product excerpt does not enumerate the individual terminal names, this page does not reproduce a potentially misleading pin table; consult the manufacturer diagram before assigning PCB tracks or socket connections.
Where can I buy LM224J/NOPB online and what is its price?
Use the Request a Quote form on this page to request LM224J/NOPB availability, current unit pricing, and order quantities. The product is a standard catalog part identified by the exact Texas Instruments MPN LM224J/NOPB and is listed in a tube-packaged 14-CDIP configuration. Request a written quotation so the proposed quantity, delivery schedule, and traceability requirements can be reviewed before procurement.
What is the lead time for LM224J/NOPB?
The current lead time for LM224J/NOPB should be confirmed through the Request a Quote form on this page because it depends on order quantity, tube packaging, and current factory and distribution status. The part is shown as an in-stock catalog item by a distributor, but stock levels can change rapidly. A quotation request provides a current delivery commitment rather than relying on a transient inventory indication.
Is LM224J/NOPB currently in stock?
LM224J/NOPB is advertised as in stock by a distributor, but the quantity available can change without notice. Use the Request a Quote form on this page to confirm current stock, tube quantity, and expected shipment timing. The exact ordering code is Texas Instruments LM224J/NOPB in a 14-CDIP package, so include the full suffix when requesting the quotation to avoid confusion with other LM224 package options.
What can replace LM224J/NOPB as a drop-in part?
LM224N/NOPB is the closest same-manufacturer option because it retains the LM224 family architecture in the 14-CDIP footprint. LM124J/NOPB and LM324J/NOPB also use the same 14-pin quad-amplifier arrangement, but their temperature grades differ and must be checked against the target circuit. Before substitution, verify supply voltage, common-mode range, offset, bias current, output drive, noise, and PCB orientation in the manufacturer documentation.
Is LM224J/NOPB the same as LM224N/NOPB?
LM224J/NOPB and LM224N/NOPB are both members of the TI LM224 family and use a 14-CDIP package with four internal amplifiers. The J and N ordering codes distinguish package or qualification configurations rather than changing the basic quad-amplifier architecture. Confirm the exact ordering table, temperature grade, marking scheme, and orderable status in the manufacturer documentation before treating one as a procurement substitute for the other.
What is the difference between LM224J and LM324J?
LM224J and LM324J share the 14-CDIP quad operational-amplifier format, but they belong to different temperature-oriented LM product families. The LM224 provides the wider operating-temperature positioning associated with industrial and military applications, while the LM324 is commonly positioned for commercial-temperature equipment. Verify the exact limits, input-offset voltage, bias current, and qualification requirements before using either part in an existing LM224J design.
What is the difference between LM224J and LM124J?
LM224J and LM124J are related 14-CDIP quad operational amplifiers with the same basic pin arrangement, but they serve different temperature and application grades. LM124 is generally associated with extended-temperature military and industrial use, whereas LM224 is the wider-temperature general-purpose counterpart used in instrumentation. Since exact limits are not shown in the product excerpt, compare the manufacturer ordering table and electrical characteristics before replacement.
When should I choose LM224J/NOPB over LM124J/NOPB or LM324J/NOPB?
Choose LM224J/NOPB when the design requires the LM224 temperature grade and a four-amplifier 14-CDIP package for conventional through-hole boards. Select LM124J/NOPB when its grade better matches an extended-temperature requirement, and consider LM324J/NOPB when its commercial-temperature specification is appropriate. All choices require confirmation of supply range, common-mode limits, offset, bias current, output capability, and exact pin arrangement.
Is LM224J/NOPB suitable for industrial sensor conditioning?
The LM224J/NOPB is suitable for many industrial sensor-conditioning circuits because it combines four internally compensated general-purpose amplifiers, a 1 MHz gain-bandwidth product, and a 3 V to 32 V supply range. Its 0.5 V/µs slew rate favors low- and mid-frequency signals rather than fast pulses. Validate the sensor output range, required common-mode voltage, grounding strategy, and operating-temperature limit in the final system.
What is the best Analog Devices equivalent for LM224J/NOPB?
An Analog Devices equivalent should be selected from a verified pin-to-pin cross-reference rather than inferred only from generic amplifier specifications. Cross-reference documentation identifies Analog Devices as a manufacturer with an LM224-related pin-to-pin replacement, but the exact orderable MPN and package are not identified in the technical excerpt. Match the 14-CDIP pinout, four-amplifier architecture, supply range, common-mode limits, offset, bias current, and temperature grade before release.
Can LM224J/NOPB be used with a single 5 V supply?
Yes, a 5 V supply falls inside the LM224 family’s stated 3 V to 32 V operating range, and the device is specifically designed for single-supply operation. The usable input and output swing still depends on the selected supply and common-mode limits, so biasing and signal levels must remain within the amplifier’s allowed range. The 14-CDIP package is also suitable for legacy 5 V industrial control boards.
How should a PCB layout be designed for LM224J/NOPB?
Place the device in the same orientation specified by the manufacturer pin diagram, route each amplifier’s inputs and outputs directly to their intended pins, and keep supply bypassing close to the common power pins. A solid ground return and short feedback traces reduce noise and stability problems. Because the LM224 is internally compensated, use the recommended closed-loop configurations and avoid adding compensation components unless the application circuit explicitly requires them.

Données de référence d'ingénierie pour LM224J/NOPB — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose LM224J/NOPB for legacy through-hole instrumentation, industrial control, and low-frequency signal-conditioning boards that need four general-purpose amplifiers, a 3 V to 32 V supply range, and the LM224 temperature-grade positioning. LM224N/NOPB is the logical same-manufacturer option when its ordering and qualification codes match the design more closely. LM124J/NOPB is appropriate when its extended-temperature family is the better fit, while LM324J/NOPB is useful when the commercial-temperature grade meets the application. National Semiconductor and Motorola LM224J versions can support legacy procurement, but modern Texas Instruments ordering is preferred for consistent documentation and lifecycle management. Before replacing any variant, verify the exact pinout, common-mode range, input offset, bias current, output drive, supply current, noise, and temperature limits rather than relying only on package similarity.

Comparaison avec les alternatives

Paramètre Ce produit LM224N/NOPB LM124J/NOPB LM324J/NOPB LM224J LM224J
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments National Semiconductor Motorola
Package 14-CDIP (0.300 in, 7.62 mm) 14-CDIP (0.300 in, 7.62 mm) 14-CDIP (0.300 in, 7.62 mm) 14-CDIP (0.300 in, 7.62 mm) 14-CDIP (0.300 in, 7.62 mm) 14-CDIP (0.300 in, 7.62 mm)
Number of Circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits

Principaux différenciateurs

  • Four independent amplifiers in one through-hole package (vs LM324J/NOPB)
  • Wide supply operating envelope (vs LM124J/NOPB)
  • Compatible 1 MHz bandwidth architecture (vs LM224J)
  • Original-manufacturer sourcing options (vs LM224J)

Notes de conception

Bypass the common supply pins close to the 14-CDIP package and preserve a low-impedance ground return. The LM224 can operate from 3 V to 32 V, but the usable input and output range is narrower than the full supply span. Confirm common-mode limits at the minimum operating voltage and ensure the output remains inside its linear swing range under the expected load.

Use the manufacturer pin diagram as the authority for orientation and socket or PCB connectivity. Keep each amplifier’s input and feedback routes short, avoid routing between high-impedance input pins and switching-power traces, and place optional input-bias resistors close to their associated pins. Through-hole lead spacing and pin-1 orientation must be checked against the physical footprint before assembly.

Do not select the LM224 for applications requiring high precision without checking input-offset voltage, input-bias current, output-current capability, and common-mode limits. The 1 MHz gain-bandwidth product and 0.5 V/µs slew rate are adequate for general low-frequency work but can become limiting in precision DC systems or large-signal audio stages. Decouple supply rails and avoid floating unused amplifier inputs.

Although each channel is internally compensated, high source impedances can introduce extra phase error, and capacitive loading can reduce stability. Keep feedback-component leads short, place compensation or filter capacitors according to the selected topology, and use an output isolation resistor when driving capacitive loads. Validate stability with the actual source resistance, load, supply, and PCB geometry.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The /NOPB ordering suffix identifies a lead-free package configuration, but explicit RoHS, REACH, halogen-free, and conflict-minerals statements require confirmation from the manufacturer product documentation.

Données vérifiées le : 2026-11-20 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

lm224j datasheet lm224j datasheet pdf LM224J/NOPB pinout LM224J/NOPB equivalent LM224J/NOPB replacement LM224J/NOPB specifications LM224J/NOPB 14-CDIP LM224J/NOPB price LM224J/NOPB stock Texas Instruments LM224J/NOPB LM224J/NOPB vs LM324J/NOPB LM224J/NOPB vs LM124J/NOPB

Composants & termes associés

Texas Instruments LM224J/NOPB LM224 LM224N/NOPB LM124J/NOPB LM324J/NOPB National Semiconductor Motorola operational amplifier quad operational amplifier analog IC signal conditioning active filter instrumentation amplifier gain-bandwidth product slew rate internal frequency compensation single-supply operation split-supply operation 14-CDIP through-hole package industrial control audio preamplifier data acquisition
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ