onsemi

LM2902MX-ON - Quad General-Purpose Op Amp | onsemi

Référence : LM2902MX-ON ✓ Actif
±16 V or 32 V Vdss 14-pin SOP Package
MOQ : 1 |

LM2902MX-ON Présentation

The onsemi LM2902MX-ON is a general-purpose, four-circuit operational amplifier packaged in a 14-pin SOP. It provides four independent amplifier channels in one device, making it suitable for compact analog signal-conditioning designs that require more than one amplifier. The LM2902MX-ON is identified as a standard operational amplifier for instrumentation and general-purpose signal-processing applications.

An operational amplifier, commonly called an op amp, is an analog IC that amplifies the voltage difference between its inverting and non-inverting inputs. The LM2902MX-ON combines four amplifiers in one package, reducing component count and simplifying PCB layout compared with four separate single-amplifier packages. Within the semiconductor hierarchy, it is a quad operational amplifier, a type of analog amplifier and signal-conditioning IC.

The primary feature of this device is its four-channel architecture within a 14-pin package. The LM2902MX family is associated with supply operation extending to ±16 V or 32 V total, covering conventional single-supply and dual-supply industrial circuit environments. The onsemi LM2902MX listing identifies the device as a standard general-purpose amplifier with four circuits in a 14-pin SOP package.

As a general-purpose quad amplifier, the LM2902MX-ON can implement four common analog functions on one board. Individual channels may be used as non-inverting or inverting amplifiers, buffers, comparators, or active filters when operated within their electrical limits. Because each channel shares the same package, bypassing, and supply connections, designers should pay particular attention to power-supply decoupling and channel-to-channel feedback isolation.

Typical applications include industrial sensor conditioning, instrumentation, analog measurement systems, control loops, and general PCB signal amplification. The four-channel organization is especially useful when a board requires several similar low-frequency signal-processing stages. In such designs, the device can reduce footprint requirements while simplifying assembly compared with four separate single op-amp packages.

A key design consideration is decoupling. Place a supply bypass capacitor close to the device supply pins and keep input and output routing short to reduce noise pickup and unstable feedback behavior. Load capacitance, output-current demand, common-mode range, and supply sequencing must also be checked against the manufacturer's operating limits before the amplifier is used in a new circuit.

This product page combines the confirmed LM2902MX-ON device identity with package-level information, verified substitute references, practical circuit guidance, and engineering-oriented comparisons. It helps designers determine whether a candidate has the required four-channel, 14-pin architecture and helps narrow the next step to electrical verification using the manufacturer datasheet.

Alternatives de remplacement direct pour LM2902MX-ON — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec LM2902MX-ON (même facteur de forme et même empreinte) — différant par Package, Number of Amplifier Channels, Product Type, Channel Architecture, Frequency Compensation.

onsemi
Package: 14-TSSOP
Product Type: Quad operational amplifier
Comparer avec LM2902MX-ON →
onsemi
Product Type: Quad operational amplifier
Channel Architecture: 4 independent amplifiers
Comparer avec LM2902MX-ON →
Texas Instruments
Package: 14-pin SOIC
Number of Amplifier Channels: 4 channels
Frequency Compensation: Internally frequency compensated
Comparer avec LM2902MX-ON →
Texas Instruments
Package: 14-SOIC
Frequency Compensation: Internal

LM2902MX/NOPB

✅ Remplacement direct
Texas Instruments
📦 SOIC-14
General Purpose · 4 · 1.2 MHz · 2 mV typical · 0.5 V/us · 3 V to 32 V · 26 V · 14-SOIC

Contactez-nous pour le prix

Voir la fiche technique →

LM2902MX

✅ Remplacement direct
Texas Instruments
📦 SOIC-14
4 channels · 26 V · 1.2 MHz · 2 mV · 100 dB · 50 dB · Bipolar · Internally frequency compensated

Contactez-nous pour le prix

Voir la fiche technique →

LM2902MX

✅ Remplacement direct
Texas Instruments
📦 SOIC-14
4 channels · 26 V · 1.2 MHz · 2 mV · 100 dB · 50 dB · Bipolar · Internally frequency compensated

Contactez-nous pour le prix

Voir la fiche technique →

LM2902M

✅ Remplacement direct
onsemi
📦 SOIC-14
Quad operational amplifier · 4 circuits · 26 V · 1.2 MHz · 2 mV · Standard general-purpose amplifier · Internal frequency compensation · 4 independent amplifiers

Contactez-nous pour le prix

Voir la fiche technique →

LM2902DTB

✅ Remplacement direct
onsemi
📦 SOIC-14
Quad operational amplifier · onsemi · 3 V to 26 V · 4 circuits · 14-TSSOP · Surface mount · 1.2 MHz · 2 mV

Contactez-nous pour le prix

Voir la fiche technique →

LM2902MX-ON Valeurs maximales et caractéristiques électriques

Product Type General-purpose operational amplifier
Number of Amplifier Channels 4 circuits
Channel Architecture Quad
Boîtier 14-pin SOP
Nombre de broches 14 pins
Type de montage Surface mount
Tension d'alimentation ±16 V or 32 V

Configuration des broches de LM2902MX-ON

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
Broche 1 OUT1 — Output of amplifier 1
Broche 2 IN1- — Inverting input of amplifier 1
Broche 3 IN1+ — Non-inverting input of amplifier 1
Broche 4 V+ — Positive supply connection
Broche 5 IN2+ — Non-inverting input of amplifier 2
Broche 6 IN2- — Inverting input of amplifier 2
Broche 7 OUT2 — Output of amplifier 2
Broche 8 OUT3 — Output of amplifier 3
Broche 9 IN3- — Inverting input of amplifier 3
Broche 10 IN3+ — Non-inverting input of amplifier 3
Broche 11 V- — Negative supply connection
Broche 12 IN4+ — Non-inverting input of amplifier 4
Broche 13 IN4- — Inverting input of amplifier 4
Broche 14 OUT4 — Output of amplifier 4

Applications typiques

LM2902MX-ON convient pour 6 applications: Industrial Sensor Conditioning, Analog Instrumentation, Power Supply Feedback Control, Active Filter and Buffering, Audio and Communication Conditioning, Embedded Control and Data Acquisition.

🏭

Industrial Sensor Conditioning

The LM2902MX-ON fits four-channel sensor-conditioning circuits because its package contains four general-purpose operational-amplifier circuits in a 14-pin SOP package. Individual channels can amplify low-level sensor signals, buffer inputs for an analog-to-digital converter, or form active gain stages. The consolidated package reduces board area compared with four separate single-amplifier devices. According to onsemi product information, the LM2902MX family is intended for general-purpose instrumentation and is listed for operation up to ±16 V or 32 V total supply. Confirm the exact input common-mode range, output swing, offset voltage, bandwidth, and temperature limits in the manufacturer datasheet before defining the gain and signal levels.

🔧

Analog Instrumentation

The LM2902MX-ON is suitable for multi-channel analog instrumentation where several precision signal paths must be implemented with one IC. Four amplifiers can handle input buffering, differential-to-single-ended conversion, gain stages, and active filters on the same board. The onsemi LM2902MX listing identifies the device as a standard general-purpose amplifier with four circuits in a 14-pin package. The single-package approach can simplify routing and procurement when all channels use similar supply and grounding arrangements. Engineers should still evaluate offset, input-bias-current drift, noise, slew rate, and output-capacitance stability for the intended instrumentation gain and bandwidth.

⚡

Power Supply Feedback Control

The LM2902MX-ON can support power-supply feedback and error-amplifier functions in designs requiring more than one control path. Its four channels allow a feedback amplifier, current-sense amplifier, and auxiliary monitoring stage to share one package. The LM2902MX family is listed for supply operation extending to ±16 V or 32 V total, making the family applicable to conventional industrial supply rails when its exact operating limits are met. The benefit is fewer packages and shorter feedback routing, but loop compensation and stability must be analyzed per channel. Verify the common-mode input range, output-drive capability, slew rate, and saturation behavior at the actual error-amplifier output level.

📡

Active Filter and Buffering

The LM2902MX-ON can implement several active-filter or buffer functions when a board requires multiple low-frequency analog stages. A single 14-pin quad package provides four channels for sections of a multi-stage filter, impedance buffering, or gain normalization. The four-channel architecture can reduce PCB area and keep related stages within one common package. The onsemi LM2902MX family listing identifies a standard general-purpose amplifier, but does not by itself establish a particular noise, slew-rate, or stability margin. Check the manufacturer datasheet for the gain-bandwidth product, output-capacitance limits, input bias current, and recommended compensation before selecting component values for a filter with high Q or long settling time.

🎧

Audio and Communication Conditioning

The LM2902MX-ON can be used for low-frequency audio or communication-signal conditioning when four similar channels are required. Possible uses include microphone preamplifier stages, line-level buffers, gain controls, and output drivers within the device's electrical limits. Its four general-purpose channels in one 14-pin SOP package can reduce the footprint compared with separate single amplifiers. The onsemi LM2902MX listing supports its use in general-purpose instrumentation, while the associated LM2902MX family listing identifies operation up to ±16 V or 32 V total supply. For audio paths, evaluate output distortion, noise, slew rate, load capability, and stable operation with the intended coupling network rather than assuming suitability from the four-channel description alone.

🖥️

Embedded Control and Data Acquisition

The LM2902MX-ON is applicable around embedded controllers and data-acquisition boards where analog sensor outputs must be amplified, inverted, or buffered before conversion. Four channels can provide local conditioning close to the sensor connector, reducing sensitive-signal trace length when the layout is planned carefully. The onsemi LM2902MX listing identifies a four-circuit general-purpose amplifier in a 14-pin SOP package. Because the package contains four amplifiers but a shared supply, system planning must include startup behavior, supply-noise coupling, and the maximum simultaneous output current. Confirm rail-to-rail behavior, input range, output swing, and absolute maximum ratings in the exact onsemi datasheet before using it with an ADC or controller input.

What is the LM2902MX-ON?
The LM2902MX-ON is an onsemi general-purpose quad operational amplifier with four amplifier circuits in a 14-pin SOP package. According to the onsemi datasheet, it belongs to the LM2902 family of standard operational amplifiers intended for instrumentation and general-purpose analog applications. Four channels in one package can simplify board layout and reduce the component count compared with four individual single-amplifier packages.
How many amplifiers are in the LM2902MX-ON?
The LM2902MX-ON contains four independent operational-amplifier circuits in one 14-pin SOP package. The four-channel structure is confirmed by onsemi product information, which identifies the device as a standard general-purpose amplifier with four circuits. Each channel can be assigned to a separate signal-conditioning function, such as buffering, amplification, filtering, or active control, subject to the datasheet operating limits.
What package does the LM2902MX-ON use?
The LM2902MX-ON uses a 14-pin SOP package for surface-mounted PCB assembly. The onsemi listing describes the LM2902MX as a four-circuit amplifier in a 14-SOP package, while comparable listings describe the same family in a 14-pin SOIC configuration. The manufacturer pin-description and package drawings should be used to assign land patterns, orientation, and PCB tracks before layout release.
What is the supply-voltage range of LM2902MX-ON?
The LM2902MX family is listed for operation at up to ±16 V, equivalent to a 32 V total supply. The onsemi LM2902MX/NOPB family listing states the same ±16 V or 32 V rating. This figure describes the maximum supply condition shown in the listing; designers must also maintain the minimum operating voltage, input common-mode range, and output-swing limits specified by the manufacturer.
Is LM2902MX-ON pin-compatible with LM2902MX/NOPB?
Yes, the LM2902MX-ON and LM2902MX/NOPB are presented as the same four-channel, 14-pin general-purpose operational-amplifier configuration, but the manufacturer and suffix should be checked before substitution. The Texas Instruments LM2902MX/NOPB listing identifies a 14-SOIC device. Final drop-in approval still requires checking pin functions, electrical limits, supply range, offset voltage, bias current, and production requirements against both datasheets.
What can replace LM2902MX-ON?
The closest drop-in candidates identified for the LM2902MX-ON are the TI LM2902MX/NOPB, ROHM LM2902MX, and Fairchild LM2902MX, all associated with the 14-pin LM2902 footprint. The LM2902M and LM2902DT comparisons also describe terminal and package consistency. No substitution should be committed until the manufacturer pinout, electrical characteristics, temperature grade, and supply requirements are compared for the exact ordering code.
Is LM2902MX-ON suitable for industrial instrumentation?
The LM2902MX-ON is suitable for many industrial instrumentation and general-purpose analog signal-conditioning applications. Its four-channel package allows several amplifier stages to be consolidated, and the LM2902MX family is listed for operation up to ±16 V or 32 V total supply. Industrial suitability still depends on the exact temperature grade, noise, offset, stability, and lifecycle requirements of the selected production part.
LM2902MX-ON vs LM2902MX/NOPB: which is better?
Choose LM2902MX-ON when the onsemi source and LM2902MX-ON ordering code are required; choose LM2902MX/NOPB when the Texas Instruments source is approved for the design. Both are identified as four-circuit general-purpose amplifiers in 14-pin packages and are listed at ±16 V or 32 V. The decisive factors are manufacturer qualification, exact pinout, electrical tolerances, temperature grade, availability, and internal procurement requirements.
When should I choose LM2902MX-ON over LM2902MX/NOPB?
Choose the LM2902MX-ON when the onsemi LM2902MX-ON ordering code is the approved part for the PCB and qualification plan. Choose LM2902MX/NOPB when that TI suffix has better supply continuity or internal approval. Both use the relevant 14-pin LM2902 footprint and provide four general-purpose amplifier channels, so the final selection should follow approved-vendor and detailed electrical-datasheet review rather than package similarity alone.
Where can I download the LM2902MX-ON datasheet?
The manufacturer-linked LM2902MX datasheet can be accessed through the onsemi datasheet page listed for this device. The Octopart LM2902MX datasheet entry is another document-locating route, while distributor listings link directly to the associated technical documentation. Use the onsemi document corresponding to the exact LM2902MX-ON ordering code when making a final release decision.
Where can I find the LM2902MX-ON pinout?
The LM2902MX-ON pinout is found in the pin-description table of the onsemi manufacturer datasheet. The 14-pin package should be checked using the package drawing alongside that table, including the exposed pad status if applicable and the pin-1 orientation mark. Do not rely solely on a generic LM2902 diagram from an unrelated source because package suffixes can differ in marking or ordering details.
Where to buy LM2902MX-ON online?
Use the Request a Quote form on this XAIPART page to request LM2902MX-ON sourcing, exact-suffix confirmation, current availability, and lead time. The onsemi LM2902MX-ON ordering code should be stated on the request so the inquiry is not confused with the unsuffixed LM2902MX or another manufacturer's LM2902MX. No alternative seller or marketplace should be selected without a separate approved-vendor review.
What is the price of LM2902MX-ON?
The current commercial terms for LM2902MX-ON should be requested through the Request a Quote form on this page. The form can confirm the exact onsemi suffix, quantity breaks, stock status, and expected lead time. A single-unit price found under a different LM2902MX manufacturer or suffix is not an interchangeable quote for the LM2902MX-ON ordering code.
Is LM2902MX-ON in stock and what is its lead time?
Current LM2902MX-ON stock and lead time should be confirmed with XAIPART through the Request a Quote form on this page. Current distributor listings show that the LM2902MX family remains commercially listed, but family-level availability does not prove inventory for the onsemi LM2902MX-ON suffix. Include the required quantity, date code, packaging, and approved source details in the request.
What are the key specifications of LM2902MX-ON that engineers should know?
The key confirmed LM2902MX-ON characteristics are four general-purpose amplifier channels, a 14-pin SOP package, and LM2902MX-family operation listed to ±16 V or 32 V. According to onsemi product information, it is a standard instrumentation and general-purpose amplifier. Offset voltage, bias current, bandwidth, slew rate, common-mode range, output swing, temperature range, and compliance declarations must be confirmed from the exact manufacturer datasheet.

Données de référence d'ingénierie pour LM2902MX-ON — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the LM2902MX-ON when the onsemi ordering code is approved and the board needs four general-purpose amplifier channels in a 14-pin SOP package. Choose LM2902MX/NOPB when the TI manufacturing source offers a preferred qualification or supply path; its listed package, four-channel architecture, and LM2902 family identity align closely. The ROHM and Fairchild LM2902MX listings are also structurally aligned but require a separate manufacturer-specific datasheet review. Use LM2902M when its exact ordering code provides the required supply or temperature option, because the comparison describes consistent terminals and package characteristics. Consider LM2902DT when its suffix offers the desired procurement configuration and the comparison parameters match the design. In every case, verify the exact pinout, electrical limits, temperature range, offset, bandwidth, stability, and compliance before releasing the substitution.

Comparaison avec les alternatives

Paramètre Ce produit LM2902MX/NOPB LM2902MX LM2902MX LM2902M LM2902DT
Manufacturer onsemi Texas Instruments ROHM Semiconductor Fairchild Semiconductor onsemi onsemi
Package SOIC-14 SOIC-14 SOIC-14 SOIC-14 SOIC-14 SOIC-14
Amplifier Channels 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits
Product Classification General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier
Number of Pins 14 pins 14 pins 14 pins 14 pins 14 pins 14 pins
Pin and Terminal Compatibility 14-pin LM2902 footprint 14-pin LM2902 footprint 14-pin LM2902 footprint 14-pin LM2902 footprint Consistent terminals and package Identical primary performance profile
Parameter Match to LM2902MX-ON Reference part 100% structural match 100% structural match 100% structural match 100% functional and package match 100% matched primary parameters
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount Surface mount

Principaux différenciateurs

  • Four general-purpose channels in one 14-pin package (vs LM2902MX/NOPB)
  • Direct onsemi ordering-code continuity (vs LM2902MX/NOPB)
  • Documented terminal and package consistency (vs LM2902M)
  • Identical compared primary performance profile (vs LM2902DT)

Notes de conception

Place the main supply bypass capacitor immediately between the V+ and V- pins, and add additional local decoupling where multiple analog channels drive changing loads. The LM2902MX family is listed for operation up to ±16 V or 32 V total, but the supply design must remain within the exact datasheet limits. Avoid routing high-current return paths beneath the amplifier ground pins and use a quiet return plane to reduce channel-to-channel supply coupling.

Keep each non-inverting input, inverting input, and output trace as short as practical, especially when the channel handles a high-gain or high-impedance signal. Place resistor networks and compensation components close to their associated pins rather than distributing them around the package. Because all four amplifiers share one package and supply, maintain adequate spacing between high-current output paths and sensitive input routing to minimize parasitic pickup.

Do not treat every LM2902 suffix as automatically interchangeable. Confirm the manufacturer, temperature grade, pin arrangement, supply limits, offset voltage, input-bias current, output swing, and package drawing for the exact ordering code. The LM2902MX/NOPB, ROHM LM2902MX, and Fairchild LM2902MX all use the same base designation but belong to different manufacturers, so approved-source and electrical review remain necessary before substitution.

Analyze gain-bandwidth, slew-rate, output-capacitance, and stability requirements for each independently wired channel. Large capacitive loads can produce ringing or instability even when the device is used at a modest nominal gain. For instrumentation and audio paths, check noise, distortion, input bias current, and output-drive behavior at the actual source impedance and load. Decoupling and short feedback paths should be evaluated together rather than treated as separate fixes.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The LM2902MX-ON is a general-purpose operational amplifier rather than an automotive-qualified device. No RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was confirmed for the exact ordering code.

Recherches associées

lm2902mx nopb LM2902MX-ON datasheet LM2902MX-ON pinout LM2902MX-ON equivalent LM2902MX-ON replacement LM2902MX-ON cross reference LM2902MX-ON price LM2902MX-ON stock onsemi LM2902MX-ON LM2902MX-ON vs LM2902MX/NOPB LM2902MX-ON application circuit LM2902MX-ON 14-SOP footprint

Composants & termes associés

onsemi LM2902MX-ON LM2902MX LM2902MX/NOPB LM2902M LM2902DT Texas Instruments ROHM Semiconductor Fairchild Semiconductor operational amplifier quad operational amplifier general-purpose amplifier analog amplifier signal-conditioning IC semiconductor SOIC-14 14-pin SOP surface-mount package instrumentation industrial sensor conditioning power-supply feedback control active filter supply voltage input common-mode range
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ