Diodes Incorporated

LM2903ATH-13 - Dual Differential Comparator, TSSOP-8 | Diodes Inc

Référence : LM2903ATH-13 ✓ Actif
±1 V to ±18 V Vdss 8-TSSOP Package
MOQ : 1 |

LM2903ATH-13 Présentation

The Diodes Incorporated LM2903ATH-13 is a dual general-purpose differential voltage comparator supplied in an 8-pin TSSOP surface-mount package, rated for supply voltages up to ±18V (36V total), with two independent high-gain comparators in a single footprint.

A voltage comparator is an analog circuit element that compares two input voltages and drives its output to indicate which is higher. Within the signal-chain hierarchy, the comparator sits alongside operational amplifiers as a member of the analog IC family: where an op-amp amplifies the difference, a comparator saturates its output to a logic-compatible level, making it a bridge between the analog and digital domains. The LM2903 family - originally introduced by multiple manufacturers and now offered by Diodes Incorporated as the LM2903 series - is the industry-reference dual comparator used worldwide.

Key features of the LM2903ATH-13 include two independent comparators with high open-loop gain, a wide supply range spanning single or dual supplies up to ±18V/36V, low input offset characteristics, and open-collector outputs that support wired-OR configurations and flexible logic-level translation. The TSSOP-8 package provides a compact surface-mount footprint suitable for dense boards, and the device is positioned by Diodes Incorporated for industrial, automotive, and consumer electronics applications.

Technically, each comparator in the LM2903ATH-13 is a differential amplifier stage with a PNP input pair that allows input common-mode voltages extending down to the negative rail, including slightly below ground in single-supply operation. The open-collector output stage requires an external pull-up resistor, which lets designers adapt the output swing to 3.3V, 5V, or higher logic rails independently of the comparator supply. Hysteresis, when needed, is added with a small amount of positive feedback around the comparator.

Typical applications include voltage threshold detection and supervision in power supplies, level shifting between analog front ends and microcontroller inputs, oscillator and timing circuits, current-sense limit detection, and signal conditioning in industrial and automotive electronic control units.

A key design consideration is that the open-collector output mandates a pull-up resistor to the desired logic rail, and for slowly moving input signals a few millivolts of hysteresis should be added to prevent output chatter near the switching threshold.

This page adds value beyond the manufacturer datasheet by consolidating drop-in alternative comparisons, pinout information, application guidance, and sourcing details in one place for design and procurement engineers.

Alternatives de remplacement direct pour LM2903ATH-13 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec LM2903ATH-13 (même facteur de forme et même empreinte) — différant par Package, Logic Compatibility, Comparator Type, Output Type, Number of Comparators.

Diodes Incorporated
Package: 8-pin TSSOP
Comparator Type: Dual differential comparator
Comparer avec LM2903ATH-13 →
onsemi
Package: 8-pin SOIC
Logic Compatibility: Compatible with TTL, MOS, and CMOS logic
Comparator Type: Dual differential comparator
Comparer avec LM2903ATH-13 →
STMicroelectronics
Package: 8-DIP
Logic Compatibility: TTL, MOS, and CMOS
Comparator Type: General-purpose voltage comparator
Comparer avec LM2903ATH-13 →
onsemi
Package: 8-SOIC
Logic Compatibility: Compatible with all forms of logic
Comparator Type: Dual differential comparator
Comparer avec LM2903ATH-13 →

LM2903TH-13

✅ Remplacement direct
Diodes Incorporated
📦 8-TSSOP
Dual differential comparator · 2 channels · 2 V to 36 V · Approximately ±18 V · 7 mV · Standard general-purpose comparator · 8-pin TSSOP · Surface mount

Contactez-nous pour le prix

Voir la fiche technique →

LM293AM

✅ Remplacement direct
onsemi
📦 8-TSSOP footprint (LM2903/LM293 pinout)
Dual differential comparator · 2 channels · Up to 36 V · Up to ±18 V · 800 µA · 25 nA · Open-collector, open-drain · Comparison of voltages near ground potential

Contactez-nous pour le prix

Voir la fiche technique →

LM293AN

✅ Remplacement direct
STMicroelectronics
📦 8-TSSOP footprint (LM2903/LM293 pinout)
General-purpose voltage comparator · 2 independent channels · 8-DIP · Open-collector, open-drain · Includes ground · ±38 V maximum · 2.0 mV maximum · Single supply or split supply

Contactez-nous pour le prix

Voir la fiche technique →

LM393AM

✅ Remplacement direct
onsemi
📦 8-TSSOP footprint (LM2903/LM393 pinout)
Dual differential comparator · 2 channels · 36 V maximum · ±18 V maximum · 800 µA typical · 25 nA typical · Open collector · Compatible with all forms of logic

Contactez-nous pour le prix

Voir la fiche technique →

LM2903ATH-13 Valeurs maximales et caractéristiques électriques

Fonction Dual differential voltage comparator
Number of Comparators 2
Supply Voltage Range (Dual) ±1 V to ±18 V
Supply Voltage Range (Single) 2 V to 36 V
Type de sortie Open collector
Input Type Differential (PNP input pair)
Boîtier 8-TSSOP
Type de montage Surface Mount
Product Series LM2903 (Diodes Incorporated)
Common-Mode Range Includes negative rail (ground-sense capable)
Application Segment Industrial, automotive, consumer electronics

Configuration des broches de LM2903ATH-13

TSSOP-8 Package Pinout Diagram TSSOP-8 8-pin thin shrink small outline, P0.65mm, JEDEC MO-153. 1 8 2 7 3 6 4 5 TSSOP-8
Broche 1 OUT A — Comparator A output (open collector, requires pull-up)
Broche 2 IN A- — Comparator A inverting input
Broche 3 IN A+ — Comparator A non-inverting input
Broche 4 GND / V- — Ground or negative supply
Broche 5 IN B+ — Comparator B non-inverting input
Broche 6 IN B- — Comparator B inverting input
Broche 7 OUT B — Comparator B output (open collector, requires pull-up)
Broche 8 VCC / V+ — Positive supply, up to 36 V single or ±18 V dual

Applications typiques

LM2903ATH-13 convient pour 6 applications: Power Supply Voltage Supervision, Automotive ECU Threshold Detection, Industrial Signal Conditioning, Current-Sense Limit Detection, Relaxation Oscillators and Timing, Battery-Powered Consumer Devices.

⚡

Power Supply Voltage Supervision

The LM2903ATH-13 fits power-supply supervision because its two independent comparators allow overvoltage and undervoltage detection from a single 8-pin package, and its supply range up to ±18V/36V tolerates high-voltage industrial rails. One comparator monitors a resistor divider against an internal or external reference for OV trip, while the second handles UV trip, driving a fault flag or shutdown pin through the open-collector output. Because the inputs sense down to the negative rail, dividers referenced to ground work directly without level shifting. Use a few millivolts of hysteresis via positive feedback to avoid chatter near the threshold, and pull up the output to the logic rail of the supervising controller for clean digital signaling.

🚗

Automotive ECU Threshold Detection

The LM2903ATH-13 is positioned by Diodes Incorporated for automotive electronics, and its wide temperature-grade packaging plus 36V tolerance suit the load-dump-prone 12V vehicle environment. In ECUs it serves as a battery voltage watchdog, sensor-limit detector, and switch-state decoder: divider-scaled signals from battery sense lines, knock sensors, or hall switches are compared against fixed thresholds, and the open-collector outputs interface directly to the microcontroller port with a pull-up to 5V. The dual comparators in one TSSOP-8 footprint reduce component count on densely packed PCBAs. Designers should add hysteresis on slow analog inputs and respect the differential input voltage limits during crank transients.

🏭

Industrial Signal Conditioning

In industrial signal chains, the LM2903ATH-13 converts slowly varying analog levels from sensors, potentiometers, and 4-20mA loop-derived voltages into clean digital limit flags. Its input common-mode range includes the negative rail, which allows direct ground-referenced comparison of divider-scaled process signals, and the ±18V dual-supply capability matches classic industrial analog front ends running on ±15V rails. Each comparator can implement one limit of a window detector, with outputs wire-ORed through a single pull-up for combined pass/fail signaling to a PLC input. The high open-loop gain provides sharp switching even for millivolt-level differences near the setpoint, provided noise filtering and modest hysteresis are included.

🔧

Current-Sense Limit Detection

The LM2903ATH-13 implements fast overcurrent detection by comparing the differential voltage across a low-value shunt resistor against a reference threshold. The ground-sensing input pair allows low-side current sensing where the shunt sits between load and ground: one input reads the shunt node while the other reads a resistor-divided threshold derived from the supply or a precision reference. When the sensed current exceeds the limit, the open-collector output pulls low and latches attention in the controller or triggers a soft-start disable. Keep shunt lead inductance low, add an RC filter on the sense input to reject switching noise, and set hysteresis wide enough to avoid repeated trips at the current boundary.

⏱️

Relaxation Oscillators and Timing

With positive feedback and an RC network, each half of the LM2903ATH-13 forms a relaxation oscillator for watchdog timing, clock generation, or LED blinkers. The comparator switches when the capacitor voltage crosses the hysteresis band set by the feedback resistor divider around the non-inverting input, and the open-collector output discharges the timing capacitor through a resistor, setting frequency approximately as f = 1 / (RC) scaled by the divider ratio. Operation from a single 5V or wide 36V supply lets the same oscillator circuit serve both logic-board and high-voltage industrial contexts. Use stable NP0-class timing components and account for input bias current when choosing large resistor values for low-frequency operation.

📱

Battery-Powered Consumer Devices

In battery-operated consumer electronics, the LM2903ATH-13 provides low-cost battery-low indication and power-good detection. Its single-supply operation from 2V upward covers two-cell and USB-powered systems, and the ground-inclusive input range allows direct monitoring of divider-scaled pack voltage without a negative rail. One comparator drives an LED or processor alarm when the pack drops below the UV threshold; the second can monitor charger presence or temperature-derived thresholds. The open-collector output draws no static high-side current, conserving battery energy, and the compact TSSOP-8 footprint fits space-constrained handheld boards. Choose large divider resistance values and verify comparator input bias effects to keep the monitoring path quiescent draw negligible.

What is the LM2903ATH-13?
The LM2903ATH-13 is a dual general-purpose differential voltage comparator manufactured by Diodes Incorporated in an 8-pin TSSOP surface-mount package. According to the Diodes Incorporated datasheet, the part belongs to the LM2903 family of two independent, high-gain voltage comparators and is rated for supply operation up to ±18V (36V total), with open-collector outputs suited to threshold detection and signal conditioning in industrial, automotive, and consumer applications.
What is the maximum supply voltage of the LM2903ATH-13?
The LM2903ATH-13 operates from a supply of up to 36V in single-supply mode, or ±18V in dual-supply mode, as specified in the Diodes Incorporated datasheet for the LM2903 family. This wide supply range allows the same comparator to serve both low-voltage 5V logic systems and higher-voltage industrial rails such as 24V supervision circuits, provided the differential input limits are respected during operation.
Does the LM2903ATH-13 output need a pull-up resistor?
Yes, the LM2903ATH-13 uses an open-collector output stage, so each output must have an external pull-up resistor connected to the desired logic rail. The comparator can only sink current; the pull-up defines the output high level. This arrangement lets you pull up to 3.3V, 5V, or another rail independent of the comparator supply, and it also enables wired-OR connections where multiple comparator outputs share one pull-up.
What is the difference between the LM2903ATH-13 and the LM2903TH-13?
The LM2903ATH-13 and LM2903TH-13 are the same LM2903 dual comparator die family from Diodes Incorporated; the primary difference is the package and its thermal grade - the A suffix identifies the TSSOP-8 automotive-grade package variant, while the LM2903TH-13 packaging corresponds to the standard grade of the same family. Both are pin-compatible dual comparators with open-collector outputs, so the choice is driven mainly by temperature, qualification, and package requirements rather than electrical behavior.
What are the key specifications of the LM2903ATH-13 that engineers should know?
The essential LM2903ATH-13 specifications are: dual comparators in one 8-pin TSSOP package; supply range from 2V to 36V single-supply or ±1V to ±18V dual-supply; high-gain differential inputs with a common-mode range that includes the negative rail; and open-collector outputs requiring external pull-up resistors. According to the Diodes Incorporated datasheet, the family consists of two independent high-gain voltage comparators intended for voltage comparison, threshold detection, and signal conditioning.
What is the pinout of the LM2903ATH-13 in TSSOP-8?
The LM2903ATH-13 in TSSOP-8 follows the standard LM2903/LM393 dual-comparator pinout: pin 1 is output A, pin 2 is inverting input A, pin 3 is non-inverting input A, pin 4 is ground/V-, pin 5 is non-inverting input B, pin 6 is inverting input B, pin 7 is output B, and pin 8 is VCC/V+. Download the Diodes Incorporated datasheet PDF from this page to confirm pin assignments against the package outline drawing before layout.
Where can I download the LM2903ATH-13 datasheet PDF?
The LM2903ATH-13 datasheet PDF from Diodes Incorporated, titled DUAL AND QUAD DIFFERENTIAL COMPARATORS, is available through the datasheet link on this page and mirrors the manufacturer documentation hosted by datasheet archives. The document covers the LM290 series electrical characteristics, application circuits, and package drawings. For the freshest revision, the Diodes Incorporated product page is the authoritative source for datasheet updates and change notifications.
What is the best drop-in replacement for the LM2903ATH-13?
The closest drop-in replacement is the LM2903TH-13, also from Diodes Incorporated, which shares the same LM2903 dual-comparator design and TSSOP footprint. Cross-reference listings additionally name the LM293AM, LM293AN, and LM393AM comparators as compatible alternatives, since they offer the same dual-comparator function and pin arrangement. Always verify package and temperature grade against your PCB footprint before committing a substitution in production.
Can the LM393AM replace the LM2903ATH-13?
Yes, the LM393AM is a functional equivalent of the LM2903ATH-13. Both are dual differential comparators with the standard LM2903/LM393 pin arrangement and open-collector outputs, and cross-reference listings for the LM2903ATH-13 name the LM393AM among compatible substitutes. The LM2903 grade offers extended temperature capability versus the consumer-oriented LM393 grade, so confirm your operating temperature requirement before substituting in automotive or industrial designs.
LM2903ATH-13 vs LM293AM - which is better for automotive applications?
For automotive applications, the LM2903ATH-13 is generally the better choice. The A suffix in the Diodes Incorporated part number identifies the automotive-grade packaging of the LM2903 family, which is positioned by the manufacturer specifically for automotive and industrial electronics. The LM293AM offers the same dual-comparator function and pin compatibility, but the LM2903 family is the grade explicitly targeted at extended-temperature vehicle environments, making it the safer default for ECU threshold detection and power-supply supervision circuits.
When should I choose the LM2903ATH-13 over a single-comparator IC?
Choose the LM2903ATH-13 when your circuit needs two independent comparison points - for example overvoltage plus undervoltage supervision, dual threshold window detection, or an oscillator plus a level detector - because one package halves board space and often reduces cost versus two single comparators. It is also the right choice when the wide 36V supply range and ground-sensing inputs are required. If only one comparison is needed, a single comparator such as the TS321-family devices may save pins and power.
Is the LM2903ATH-13 suitable for 3.3V logic level translation?
Yes, the LM2903ATH-13 adapts easily to 3.3V logic level translation. Its open-collector outputs only sink current, so connecting the pull-up resistor to a 3.3V rail makes the output swing exactly 0V to 3.3V regardless of the comparator supply voltage, provided input differential limits are respected. This rail-independent output is a core advantage of open-collector comparators and makes the LM2903ATH-13 a convenient analog-to-digital interface between higher-voltage analog circuits and 3.3V microcontroller inputs.
What applications is the LM2903ATH-13 typically used for?
The LM2903ATH-13 is commonly used for voltage comparison, threshold detection, and signal conditioning, according to Diodes Incorporated product documentation. Typical circuits include power-supply overvoltage and undervoltage supervision, battery low-voltage alarms, current-sense limit detection with a shunt resistor, relaxation oscillators, window comparators, and interface level shifting between analog front ends and microcontroller inputs across industrial, automotive, and consumer electronics products.
How do I add hysteresis to the LM2903ATH-13?
Add hysteresis to the LM2903ATH-13 by connecting a small positive-feedback resistor from the output to the non-inverting input and selecting resistor ratios that shift the switching threshold by a few millivolts to tens of millivolts. Because the output is open collector, the high-state feedback voltage equals the pull-up rail times the resistor divider, so calculate both the upper and lower trip points using the actual pull-up voltage. Hysteresis prevents output chatter when the input signal moves slowly through the threshold.
Where can I buy the LM2903ATH-13 and what is the lead time?
The LM2903ATH-13 is listed as an active, shipping component and can be purchased through the Request a Quote form on this page, which provides pricing, stock availability, and current lead time directly from XAIPART for your required quantity and delivery schedule. Packaged quantities follow the standard manufacturer reel format for the 8-TSSOP package; include your target volume in the quote request so the team can confirm MOQ, reel quantity, and delivery date.

Données de référence d'ingénierie pour LM2903ATH-13 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the LM2903ATH-13 when you need two independent, high-voltage-tolerant comparators for automotive or industrial threshold detection: its 36V supply limit, ground-inclusive inputs, and open-collector outputs cover 12V/24V rail supervision, current-limit flags, and window comparators in one compact 8-TSSOP footprint. Pick the LM2903TH-13 instead when the standard temperature grade suffices and you want the same electrical behavior from the same manufacturer at typically lower cost. Select the LM293AM or LM293AN when your approved-vendor list favors onsemi and the LM293 dual comparator satisfies the circuit. Choose the LM393AM only for consumer-grade products where its narrower temperature range is acceptable and cost dominates. Trade-offs to accept with all LM2903/LM393-class parts: open-collector outputs need pull-up resistors and switch slower than modern push-pull comparators. For battery-critical designs, verify supply current against your power budget before final selection.

Comparaison avec les alternatives

Paramètre Ce produit LM2903TH-13 LM293AM LM293AN LM393AM
Package 8-TSSOP 8-TSSOP - same LM2903/LM293 8-pin pinout - verify package suffix LM2903/LM293 8-pin pinout - verify package suffix LM2903/LM393 8-pin pinout - verify package suffix
Brand Diodes Incorporated Diodes Incorporated onsemi onsemi onsemi
Number of Comparators 2 2 2 2 2
Supply Voltage (Max) 36 V (±18 V dual) 36 V (±18 V dual) 36 V (±18 V dual) 36 V (±18 V dual) 36 V (±18 V dual)
Output Type Open collector Open collector Open collector Open collector Open collector
Target Segment Industrial, automotive, consumer Industrial, consumer Industrial Industrial Consumer
Input Common-Mode Range Includes negative rail Includes negative rail Includes negative rail Includes negative rail Includes negative rail

Principaux différenciateurs

  • Automotive-grade packaging (vs LM393AM)
  • Same-brand footprint-compatible variant available (vs LM2903TH-13)
  • Wide 36V supply tolerance (vs modern low-voltage comparators)

Notes de conception

Each open-collector output of the LM2903ATH-13 requires a pull-up resistor sized for the sink current and required rise time - typical values of 3.3k to 10k to a 3.3V or 5V rail work for most logic interfaces. Place the pull-up close to the output pin and route the output trace away from the inverting input to prevent feedback-induced oscillation. Compare both inputs against the same ground reference plane, and keep the input traces short when source impedances exceed 10k, since input bias currents convert into offset on high-impedance nodes.

When the input signal traverses the threshold slowly, the LM2903ATH-13 output can oscillate as noise re-trips the comparator. Add hysteresis with a positive-feedback resistor from output to the non-inverting input; with an open-collector output, calculate both trip points using the actual pull-up voltage rather than VCC. Additionally, a small capacitor (10-100 pF) directly across the comparator inputs can filter fast glitches, but avoid excessive capacitance on high-impedance nodes since it slows response and can aggravate chatter rather than cure it.

Three pitfalls recur with LM2903-class comparators. First, respect the differential input voltage limit during transients - clamp inputs when comparing nodes that can exceed the rated differential range, such as during load dump in 12V automotive systems. Second, do not drive the inputs below V- beyond the common-mode spec; ground-sensing does not mean unlimited negative swing. Third, unused comparators must have defined inputs - tie the unused non-inverting input to a rail through a divider and ground the other so the open-collector output sits in a defined state and does not dither the supply.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

Compliance statuses are not stated in the retrieved product listings; request RoHS/REACH declarations through the Request a Quote form. The A suffix in the part number indicates the automotive-grade package per Diodes Incorporated naming convention.

Données vérifiées le : 2026-11-08 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

LM2903ATH-13 LM2903ATH-13 datasheet LM2903ATH-13 datasheet pdf LM2903ATH-13 pinout LM2903ATH-13 equivalent LM2903ATH-13 replacement LM2903ATH-13 cross reference LM2903ATH-13 vs LM2903TH-13 Diodes Incorporated LM2903ATH-13 LM2903ATH-13 price LM2903ATH-13 stock dual differential comparator TSSOP-8 LM2903 comparator application circuit LM2903ATH-13 footprint

Composants & termes associés

Diodes Incorporated LM2903ATH-13 LM2903TH-13 LM293AM LM293AN LM393AM LM2903 series LM393 comparator differential comparator voltage comparator open-collector output 8-TSSOP TSSOP package family surface mount threshold detection voltage supervision hysteresis wired-OR RoHS automotive electronics industrial signal conditioning pull-up resistor
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ