LM2903MX-TI Dual Comparator | Texas Instruments
Référence : LM2903MX-TI ✓ ActifLM2903MX-TI Présentation
A comparator is an analog integrated circuit that evaluates two input voltages and produces a digital logic result indicating which input is higher. Within the semiconductor hierarchy, the LM2903MX-TI belongs to the comparator family, which is part of broader interface and signal-conditioning ICs. Its differential inputs reduce sensitivity to common-mode voltage, while the open-collector outputs allow the output state to be pulled up to a suitable external supply voltage.
The LM2903 family combines two comparison channels in one package. Rail-to-rail input operation supports sensing near the supply rails, and the open-collector architecture provides flexible interface levels when paired with an external pull-up resistor. The 8-pin SOIC package supports conventional surface-mount assembly and is also available in tape-and-reel ordering. Exact offset, response-time, current, and temperature limits should be confirmed from the manufacturer datasheet before final circuit release.
The dual-channel organization reduces component count in systems requiring two independent decisions. Separate open-collector outputs can drive digital logic, relay drivers, optocouplers, or other devices that require a pulled-up bus. Because an open-collector transistor can hold the output low but cannot actively drive it high, the pull-up voltage and resistor must be selected to match the driven interface and required rise time.
Typical applications include industrial sensor thresholding, battery and power-system monitoring, overvoltage and undervoltage detection, waveform crossing detection, and general-purpose control logic. Two channels can implement complementary comparisons or a hysteretic switching arrangement. The device is also appropriate for educational and prototyping systems where a conventional dual comparator in an 8-pin SOIC is required.
Designers should verify the input common-mode range, supply limits, output sink-current capability, input offset voltage, and response time against the manufacturer datasheet. Keep input and output return paths short, place pull-up resistors close to the relevant output pins, and account for input filtering when the compared signals contain noise or switching transients.
This product page organizes the LM2903MX-TI package, sourcing, pinout availability, and design considerations while identifying same-package alternatives for engineering evaluation. Confirm electrical equivalence, lifecycle status, and manufacturing qualifications before approving a substitution.
Alternatives de remplacement direct pour LM2903MX-TI — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec LM2903MX-TI (même facteur de forme et même empreinte) — différant par Package, Comparator Type, Output Type, Operating Temperature Range.
LM2903MX/NOPB
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →LM2903M/NOPB
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →LM2903MX
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →LM2903MX
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →BA2903F-E2
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
LMV393
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
LM2903MX-TI Valeurs maximales et caractéristiques électriques
| Comparator Type | Dual differential comparator |
| Number of Channels | 2 channels |
| Type de sortie | Open-collector |
| Input Common-Mode Range | Rail-to-rail |
| Supply Voltage, Dual | Up to ±18 V |
| Total Supply Span | Up to 36 V |
| Differential Input | 2 differential inputs |
| Boîtier | 8-pin SOIC |
| Type de montage | Surface mount |
| Shipping Format | Tape and reel |
Guide de configuration des broches du LM2903MX-TI 8-pin soic
Configuration des broches du LM2903MX-TI (boîtier 8-pin soic). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour LM2903MX-TI.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
LM2903MX-TI convient pour 6 applications: Industrial Sensor Thresholding, Power-Supply Overvoltage Detection, Battery Voltage Monitoring, Motor and Relay Control, Waveform and Crossing Detection, Digital Logic Interface.
Industrial Sensor Thresholding
The LM2903MX-TI is appropriate for comparing a conditioned industrial sensor signal against a reference threshold because it provides two differential comparison channels in one 8-pin SOIC package. Each open-collector output can pull a logic node low when the selected input condition is met, allowing the result to feed a controller through a pull-up network. The dual arrangement can handle two independent sensors or implement a window comparison. Its dual-supply capability extends to ±18 V, although the input common-mode limits, offset, and response time must be checked against the manufacturer datasheet before selecting resistor and filtering values.
Recommandé
Power-Supply Overvoltage Detection
The LM2903MX-TI can supervise a divided power rail by comparing the scaled voltage with a reference and using the open-collector output to signal an overvoltage condition. The ±18 V dual-supply capability supports monitoring systems operating across positive and negative rails, while the rail-to-rail input characteristic helps when the sensing point approaches a supply limit. A pull-up resistor establishes the fault-signal logic level. The application must include resistor-divider tolerances, filtering, isolation from switching transients, and a defined reset strategy for downstream converters or protection relays.
Recommandé
Battery Voltage Monitoring
The LM2903MX-TI is suitable for battery-pack monitoring because two differential channels can compare divided pack voltage with upper and lower reference levels, creating a window-limit function. Its open-collector outputs can drive host-status inputs, indicator circuits, or isolation stages when paired with suitable pull-ups. The single-supply capability simplifies low-power systems, but common-mode operation, quiescent demand, and the behavior of the LM2903 family at low supply voltages must be confirmed from the manufacturer documentation. Add input filtering to reject cell-transient spikes and choose divider resistors with appropriate tolerance and temperature coefficient.
Recommandé
Motor and Relay Control
The LM2903MX-TI can serve as the decision element in motor-startup, speed-reference, or relay-control circuits by comparing a feedback voltage with a command level. The open-collector output provides a flexible way to drive a transistor, relay driver, or optocoupler when a pull-up is present, and the device can operate from dual supplies up to ±18 V for circuits containing positive and negative signal nodes. Because inductive loads introduce transients, use appropriate isolation, clamp protection, and grounding practices. Confirm output sink-current capability and response time before choosing the pull-up and driver topology.
Recommandé
Waveform and Crossing Detection
The LM2903MX-TI is useful for detecting signal crossings in oscillator, timer, and pulse-width circuits because two independent channels can monitor related waveforms or thresholds. Rail-to-rail input operation reduces the restriction around the supply rails, while differential comparison helps reject common-mode variations. Open-collector outputs allow the crossing events to drive pulled-up logic or trigger another stage. Add hysteresis with positive feedback when chatter near a threshold could cause repeated switching. Component tolerances, input offset, propagation delay, and noise should be evaluated against the minimum pulse width and repetition rate of the target waveform.
Recommandé
Digital Logic Interface
The LM2903MX-TI can interface analog sensing circuits with digital logic because its open-collector output supports a pull-up to the voltage required by the receiving device. This is useful in legacy and mixed-signal systems where a 5 V or pull-up-defined bus must be driven without a push-pull output stage. Two channels can supervise complementary conditions and feed enable, fault, or interlock inputs. Use a resistor value that satisfies both sink-current and rise-time requirements, and maintain a low-impedance return from the comparator to the logic supply. The open-collector topology does not actively drive the logic-high state.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour LM2903MX-TI — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | LM2903MX/NOPB | LM2903M/NOPB | LM2903MX | LM2903MX | BA2903F-E2 | LMV393 |
|---|---|---|---|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOP | 8-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | onsemi | ROHM Semiconductor | ROHM Semiconductor | Texas Instruments |
| Comparator Type | Dual differential comparator | Dual differential comparator | Dual comparator | Dual differential comparator | Dual comparator | Dual comparator | Dual comparator |
| Number of Channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Output Type | Open-collector | Open-collector | Open-collector | Open-collector | Open-collector | Open-collector | Open-collector |
Principaux différenciateurs
- Supports a wider total supply span than the listed ROHM LM2903MX option (vs ROHM Semiconductor LM2903MX)
- Rail-to-rail input characterization for near-rail sensing (vs Texas Instruments LMV393)
- Two-channel integration in a standard 8-pin SOIC footprint (vs Single-channel discrete comparator implementation)
Notes de conception
Keep the LM2903MX-TI close to the signals being compared and route the differential inputs as a compact pair to reduce pickup from switching circuitry. Place each pull-up resistor directly beside its open-collector output. Maintain a continuous ground reference between the comparator, divider network, and logic load, and avoid routing comparator inputs beneath unrelated high-current or switching nets.
Do not treat an open-collector output as a push-pull output. Without a pull-up resistor, the output can only pull the node low and may float when the internal transistor turns off. Select the pull-up voltage to remain compatible with the receiving logic, calculate its value from sink-current and rise-time constraints, and confirm that all connected devices tolerate the resulting high level.
Add hysteresis when the compared signals can cross slowly or contain noise. Small positive feedback around the relevant input can prevent repeated output transitions, but excessive feedback may alter the threshold or cause saturation. Use resistor networks that preserve the intended threshold, and add input filtering with values that do not materially change the required response time. Verify offset and propagation delay against the minimum detectable signal interval.
Informations de conformité
Compliance declarations were not stated in the available manufacturer and distributor records. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for the exact orderable MPN before production approval.