Texas Instruments

LM2903MX-TI Dual Comparator | Texas Instruments

MPN: LM2903MX-TI ✓ 啟用中
Up to ±18 V Vdss 8-pin SOIC Package
MOQ: 1 |

LM2903MX-TI 概覽

The Texas Instruments LM2903MX-TI is a dual differential comparator with open-collector outputs, rail-to-rail input capability, and support for single-supply or dual-supply operation. The device operates with supply voltages up to ±18 V, equivalent to a 36 V total span, and is offered in an 8-pin SOIC package. Its two independent channels make it suitable for threshold detection, window comparison, and signal conditioning systems.

A comparator is an analog integrated circuit that evaluates two input voltages and produces a digital logic result indicating which input is higher. Within the semiconductor hierarchy, the LM2903MX-TI belongs to the comparator family, which is part of broader interface and signal-conditioning ICs. Its differential inputs reduce sensitivity to common-mode voltage, while the open-collector outputs allow the output state to be pulled up to a suitable external supply voltage.

The LM2903 family combines two comparison channels in one package. Rail-to-rail input operation supports sensing near the supply rails, and the open-collector architecture provides flexible interface levels when paired with an external pull-up resistor. The 8-pin SOIC package supports conventional surface-mount assembly and is also available in tape-and-reel ordering. Exact offset, response-time, current, and temperature limits should be confirmed from the manufacturer datasheet before final circuit release.

The dual-channel organization reduces component count in systems requiring two independent decisions. Separate open-collector outputs can drive digital logic, relay drivers, optocouplers, or other devices that require a pulled-up bus. Because an open-collector transistor can hold the output low but cannot actively drive it high, the pull-up voltage and resistor must be selected to match the driven interface and required rise time.

Typical applications include industrial sensor thresholding, battery and power-system monitoring, overvoltage and undervoltage detection, waveform crossing detection, and general-purpose control logic. Two channels can implement complementary comparisons or a hysteretic switching arrangement. The device is also appropriate for educational and prototyping systems where a conventional dual comparator in an 8-pin SOIC is required.

Designers should verify the input common-mode range, supply limits, output sink-current capability, input offset voltage, and response time against the manufacturer datasheet. Keep input and output return paths short, place pull-up resistors close to the relevant output pins, and account for input filtering when the compared signals contain noise or switching transients.

This product page organizes the LM2903MX-TI package, sourcing, pinout availability, and design considerations while identifying same-package alternatives for engineering evaluation. Confirm electrical equivalence, lifecycle status, and manufacturing qualifications before approving a substitution.

直接替換替代品,適用於 LM2903MX-TI — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: LM2903MX-TI (相同外形與佔位) — 差異在於 Package, Comparator Type, Output Type, Operating Temperature Range.

Texas Instruments
Package: SOIC (D), 8 pins
Output Type: Open collector
Operating Temperature Range: -40°C to 85°C
Texas Instruments
Package: 8-SOIC, 0.154 in (3.90 mm) body width
Comparator Type: General Purpose
Operating Temperature Range: -40 °C to +85 °C
比較對象 LM2903MX-TI →
Texas Instruments
Package: 8-pin SOIC (D)
Operating Temperature Range: -40°C to 85°C

LM2903MX/NOPB

✅ 直接替換
Texas Instruments
📦 8-pin SOIC
Dual differential comparator · 2 channels · General-purpose comparator · Open-collector · Rail-to-rail · 2.0 mV maximum per comparator

聯絡詢價

查看資料表 →

LM2903M/NOPB

✅ 直接替換
Texas Instruments
📦 8-pin SOIC
Dual differential comparator · 2 channels · 2 independent comparators · Open collector · 2 mV · 2 nA and 5 nA · 1.5 us · Up to 18 V

聯絡詢價

查看資料表 →

LM2903MX

✅ 直接替換
Texas Instruments
📦 8-pin SOIC
General Purpose · 2 · 2 V to 36 V · 1 V to 18 V · 1.3 us · Open-Collector · Rail-to-Rail · CMOS, MOS, TTL

聯絡詢價

查看資料表 →

LM2903MX

✅ 直接替換
Texas Instruments
📦 8-pin SOIC
General Purpose · 2 · 2 V to 36 V · 1 V to 18 V · 1.3 us · Open-Collector · Rail-to-Rail · CMOS, MOS, TTL

聯絡詢價

查看資料表 →

BA2903F-E2

✅ 直接替換
📦 8-pin SOIC
Dual comparator in an 8-pin SOP package with 0 V package-footprint difference; verify open-collector behavior and electrical limits before substitution.

📋 參考替代品(不在目錄中)

LMV393

✅ 直接替換
📦 8-pin SOIC
Pin-compatible 8-pin dual comparator for a 5 V supply with common-mode operation to 4 V; verify the target’s wider rail-to-rail and supply requirements.

📋 參考替代品(不在目錄中)

LM2903MX-TI 最大額定值與電氣特性

Comparator Type Dual differential comparator
Number of Channels 2 channels
輸出類型 Open-collector
Input Common-Mode Range Rail-to-rail
Supply Voltage, Dual Up to ±18 V
Total Supply Span Up to 36 V
Differential Input 2 differential inputs
封裝 8-pin SOIC
安裝類型 Surface mount
Shipping Format Tape and reel

LM2903MX-TI 8-pin soic 腳位配置指南

LM2903MX-TI(8-pin soic 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

LM2903MX-TI 的 8-pin soic 封裝腳位圖

無詳細腳位定義資料: LM2903MX-TI.

請參閱 資料表 以查看完整腳位配置。

典型應用

LM2903MX-TI 適用於 6 應用s: Industrial Sensor Thresholding, Power-Supply Overvoltage Detection, Battery Voltage Monitoring, Motor and Relay Control, Waveform and Crossing Detection, Digital Logic Interface.

🏭

Industrial Sensor Thresholding

The LM2903MX-TI is appropriate for comparing a conditioned industrial sensor signal against a reference threshold because it provides two differential comparison channels in one 8-pin SOIC package. Each open-collector output can pull a logic node low when the selected input condition is met, allowing the result to feed a controller through a pull-up network. The dual arrangement can handle two independent sensors or implement a window comparison. Its dual-supply capability extends to ±18 V, although the input common-mode limits, offset, and response time must be checked against the manufacturer datasheet before selecting resistor and filtering values.

⚡

Power-Supply Overvoltage Detection

The LM2903MX-TI can supervise a divided power rail by comparing the scaled voltage with a reference and using the open-collector output to signal an overvoltage condition. The ±18 V dual-supply capability supports monitoring systems operating across positive and negative rails, while the rail-to-rail input characteristic helps when the sensing point approaches a supply limit. A pull-up resistor establishes the fault-signal logic level. The application must include resistor-divider tolerances, filtering, isolation from switching transients, and a defined reset strategy for downstream converters or protection relays.

🔋

Battery Voltage Monitoring

The LM2903MX-TI is suitable for battery-pack monitoring because two differential channels can compare divided pack voltage with upper and lower reference levels, creating a window-limit function. Its open-collector outputs can drive host-status inputs, indicator circuits, or isolation stages when paired with suitable pull-ups. The single-supply capability simplifies low-power systems, but common-mode operation, quiescent demand, and the behavior of the LM2903 family at low supply voltages must be confirmed from the manufacturer documentation. Add input filtering to reject cell-transient spikes and choose divider resistors with appropriate tolerance and temperature coefficient.

🤖

Motor and Relay Control

The LM2903MX-TI can serve as the decision element in motor-startup, speed-reference, or relay-control circuits by comparing a feedback voltage with a command level. The open-collector output provides a flexible way to drive a transistor, relay driver, or optocoupler when a pull-up is present, and the device can operate from dual supplies up to ±18 V for circuits containing positive and negative signal nodes. Because inductive loads introduce transients, use appropriate isolation, clamp protection, and grounding practices. Confirm output sink-current capability and response time before choosing the pull-up and driver topology.

📡

Waveform and Crossing Detection

The LM2903MX-TI is useful for detecting signal crossings in oscillator, timer, and pulse-width circuits because two independent channels can monitor related waveforms or thresholds. Rail-to-rail input operation reduces the restriction around the supply rails, while differential comparison helps reject common-mode variations. Open-collector outputs allow the crossing events to drive pulled-up logic or trigger another stage. Add hysteresis with positive feedback when chatter near a threshold could cause repeated switching. Component tolerances, input offset, propagation delay, and noise should be evaluated against the minimum pulse width and repetition rate of the target waveform.

🔧

Digital Logic Interface

The LM2903MX-TI can interface analog sensing circuits with digital logic because its open-collector output supports a pull-up to the voltage required by the receiving device. This is useful in legacy and mixed-signal systems where a 5 V or pull-up-defined bus must be driven without a push-pull output stage. Two channels can supervise complementary conditions and feed enable, fault, or interlock inputs. Use a resistor value that satisfies both sink-current and rise-time requirements, and maintain a low-impedance return from the comparator to the logic supply. The open-collector topology does not actively drive the logic-high state.

What is the LM2903MX-TI and what does it do?
The LM2903MX-TI is a Texas Instruments dual differential comparator with two open-collector outputs and rail-to-rail input operation in an 8-pin SOIC package. Each channel compares a positive and negative input and pulls its output low when the positive input is higher. According to the TI LM2903 product page, the device is intended for general-purpose comparison, threshold detection, and industrial control applications.
What is the supply voltage range of LM2903MX-TI?
The LM2903MX-TI supports dual-supply operation up to ±18 V, corresponding to a total span of 36 V. It can also be used in single-supply circuits when the input, output, and pull-up network remain within the manufacturer’s electrical limits. The TI LM2903 product page identifies the device as a dual differential comparator, while the product listing specifies the ±18 V and 36 V supply capability.
What is the difference between open-collector and push-pull comparator outputs?
An open-collector output can pull its node low but cannot actively drive it high, so an external pull-up resistor is required. A push-pull output can drive both logic states without that resistor, although it offers less flexibility when several devices share a bus. The LM2903MX-TI uses open-collector outputs, according to its distributor product classification and the TI LM2903 family description.
Where can I download the LM2903MX datasheet PDF?
The official LM2903MX datasheet and ordering information are available through the Texas Instruments LM2903 product page at https://www.ti.com/product/LM2903. The LM2903MX tape-and-reel order code is also identified on the TI LM2903-N part-details page. Use the manufacturer datasheet for the authoritative pin description, electrical limits, and recommended operating conditions.
Where can I find the LM2903MX pinout?
The LM2903MX uses an 8-pin SOIC package, and its authoritative pin description appears in the manufacturer LM2903 datasheet. The Texas Instruments product page links directly to the LM2903 documentation and ordering information. A package-level diagram is available from the XAIPART package library, while the complete functional pin map should be assigned from the manufacturer pin-description table.
Can LM2903MX-TI operate from a single supply voltage?
Yes, the LM2903 family can be used in single-supply operation, but the input common-mode range and open-collector pull-up arrangement must remain inside the electrical limits specified by Texas Instruments. Rail-to-rail input operation helps when sensing near the supply rails. The manufacturer LM2903 datasheet should be checked for the exact single-supply limits before the circuit is released.
What can replace the LM2903MX-TI?
A suitable replacement must use the same 8-pin SOIC footprint, preserve the two-channel differential-input arrangement, and provide compatible open-collector behavior. Same-brand options include the LM2903MX/NOPB ordering form, while the LMV393 is identified as a pin-compatible alternative for suitable 5 V common-mode designs. The onsemi and ROHM LM2903MX devices are also relevant candidates, subject to a detailed electrical and lifecycle review.
Is the LM2903MX-TI the same as LM2903MX/NOPB?
The LM2903MX/NOPB is the Texas Instruments ordering notation associated with the LM2903MX device, while LM2903MX-TI identifies the same Texas Instruments 8-pin SOIC configuration in a distributor-style part format. The order suffix can also communicate package and lead-free processing details, so engineers should reconcile the complete orderable MPN and packaging code against the manufacturer ordering table before approving it for production.
What is the best onsemi equivalent for LM2903MX-TI?
The onsemi LM2903MX is the most direct cross-brand candidate because it uses the same LM2903 family designation and is offered in an 8-pin SOIC configuration. Its product record identifies it as a comparator with the same general device family and mounting format. Final substitution still requires checking offset voltage, common-mode range, propagation delay, output current, supply limits, and qualification requirements.
When should I choose LM2903MX-TI over the LMV393?
Choose the LM2903MX-TI when the design benefits from the LM2903 family’s supply range and rail-to-rail input characteristic. The LMV393 is specifically identified as pin-compatible when operating from 5 V and requiring a common-mode threshold near 4 V, but its input and supply behavior may not satisfy higher-voltage or wider-range designs. Verify the comparator thresholds and output timing before choosing between them.
Is LM2903MX-TI suitable for industrial sensor thresholding?
The LM2903MX-TI is suitable for industrial threshold detection because it provides two differential comparison channels, open-collector outputs, and operation from a single supply or a dual supply up to ±18 V. The open-collector outputs can interface with pull-up-based digital logic or downstream power stages. Sensor excitation, grounding, protection, and industrial qualification should be evaluated separately.
How do I size the pull-up resistor for LM2903MX-TI?
The pull-up resistor sets the output high level and influences output rise time. Its value must satisfy the sink-current limit, the input current of the driven logic, and the required switching speed. The exact resistor should be calculated from the external load and the manufacturer’s output-current and capacitance limits. Keep the resistor close to the LM2903MX-TI output and route the return current away from sensitive input nodes.
Does LM2903MX-TI need an output pull-up resistor?
Yes, each open-collector output requires a pull-up resistor unless the output node is already connected to a shared pulled-up bus or another circuit provides the pull-up function. The resistor raises the output to a valid logic-high voltage after the internal transistor turns off. Its value must respect both the available output sink current and the rise-time requirement of the connected circuit.
How much current does the LM2903MX-TI use?
The exact supply-current specification depends on operating state, channel state, supply voltage, and temperature, so use the manufacturer LM2903 datasheet for the definitive values. The TI product page describes the LM2903 as a dual differential comparator, and the family is associated with low-power operation for general-purpose comparison. Account for both channels and the pull-up current when calculating total system consumption.
Where can I buy LM2903MX-TI and what is the lead time?
Use the Request a Quote form on this page to request LM2903MX-TI availability, current lead time, minimum order quantity, and a formal quotation. The component is an 8-pin SOIC device available in tape-and-reel ordering, but stock and lead time can change by lot and order quantity. The form routes the request to XAIPART without relying on a stale public listing.

工程參考資料,適用於 LM2903MX-TI — 比較、設計指引及合規資訊。

選型指南

Choose the LM2903MX-TI for a two-channel threshold or window-detection design that benefits from rail-to-rail input operation, open-collector outputs, and dual-supply operation up to ±18 V. Select LM2903MX/NOPB when the Texas Instruments ordering code and lead-free processing designation align with the approved BOM, then reconcile the complete orderable code before release. LM2903M/NOPB is another same-manufacturer family option, but its exact temperature and lead-finish configuration should be checked. The onsemi LM2903MX is a strong cross-brand candidate in the same 8-pin format, while the ROHM LM2903MX is limited by its listed 30 V total operating span. BA2903F-E2 requires confirmation of open-collector behavior and detailed electrical limits. Use the LMV393 only when its 5 V operating profile and common-mode capability satisfy the design.

與替代品比較

參數 本產品 LM2903MX/NOPB LM2903M/NOPB LM2903MX LM2903MX BA2903F-E2 LMV393
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOP 8-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments onsemi ROHM Semiconductor ROHM Semiconductor Texas Instruments
Comparator Type Dual differential comparator Dual differential comparator Dual comparator Dual differential comparator Dual comparator Dual comparator Dual comparator
Number of Channels 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels
Output Type Open-collector Open-collector Open-collector Open-collector Open-collector Open-collector Open-collector

主要差異化特點

  • Supports a wider total supply span than the listed ROHM LM2903MX option (對比ROHM Semiconductor LM2903MX)
  • Rail-to-rail input characterization for near-rail sensing (對比Texas Instruments LMV393)
  • Two-channel integration in a standard 8-pin SOIC footprint (對比Single-channel discrete comparator implementation)

設計說明

Keep the LM2903MX-TI close to the signals being compared and route the differential inputs as a compact pair to reduce pickup from switching circuitry. Place each pull-up resistor directly beside its open-collector output. Maintain a continuous ground reference between the comparator, divider network, and logic load, and avoid routing comparator inputs beneath unrelated high-current or switching nets.

Do not treat an open-collector output as a push-pull output. Without a pull-up resistor, the output can only pull the node low and may float when the internal transistor turns off. Select the pull-up voltage to remain compatible with the receiving logic, calculate its value from sink-current and rise-time constraints, and confirm that all connected devices tolerate the resulting high level.

Add hysteresis when the compared signals can cross slowly or contain noise. Small positive feedback around the relevant input can prevent repeated output transitions, but excessive feedback may alter the threshold or cause saturation. Use resistor networks that preserve the intended threshold, and add input filtering with values that do not materially change the required response time. Verify offset and propagation delay against the minimum detectable signal interval.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

Compliance declarations were not stated in the available manufacturer and distributor records. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for the exact orderable MPN before production approval.

相關搜尋

lm2903mx nopb lm2903mx datasheet LM2903MX-TI datasheet PDF LM2903MX-TI pinout LM2903MX-TI equivalent LM2903MX-TI drop-in replacement LM2903MX-TI cross reference Texas Instruments LM2903MX-TI LM2903MX-TI 8 pin SOIC LM2903MX-TI open collector comparator LM2903MX-TI price LM2903MX-TI stock

相關元件與詞彙

Texas Instruments LM2903MX-TI LM2903MX/NOPB LM2903M/NOPB LMV393 onsemi ROHM Semiconductor BA2903F-E2 Dual differential comparator Comparator Analog integrated circuit Interface IC Open-collector output Rail-to-rail input Differential input 8-pin SOIC SOIC package family Surface-mount device Industrial threshold detection Power-supply supervision Battery monitoring Waveform crossing detection Pull-up resistor Input offset voltage Propagation delay
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情