LM2903VQDRG4 - Dual 36V Open-Collector Comparator | TI
Référence : LM2903VQDRG4 ✓ ActifLM2903VQDRG4 Présentation
A differential voltage comparator is an analog integrated circuit that compares two input voltages and changes its output state when the difference between them crosses a defined threshold. The LM2903 family belongs to the comparator hierarchy within the broader amplifier and signal-conditioning IC category. Its differential inputs allow it to detect positive or negative voltage relationships, while the open-collector output supports wired logic, relay drivers, and interface functions.
The LM2903VQDRG4 provides two independent comparators within one package. Each channel can operate from a single supply or from dual supplies when the total supply span and positive-to-negative rail requirements are satisfied. Open-collector outputs require an external pull-up resistor and can be connected to a common bus when only one output is active at a time. This arrangement is useful when multiple sensing channels must share a digital or microcontroller input.
Key electrical characteristics include a 2 V to 36 V total supply range, 15 mV input offset voltage, 1.3 microsecond response time, and 1 mA supply current. The enhanced-voltage LM2903V version supports operation up to 36 V, which gives designers additional margin for industrial supply transients and automotive-style sensing environments when the board-level protection and operating requirements are appropriate.
Typical uses include overvoltage and undervoltage detection, sensor threshold conditioning, industrial control interfaces, battery monitoring, window or level sensing, and general digital threshold detection. Two independent channels can also be used separately for a high-side and low-side limit, a differential sensor monitor, or a pair of unrelated comparator functions.
For PCB implementation, keep input and output traces short, provide a stable reference or return path, and place the required pull-up resistor close to the open-collector output. Account for input common-mode limits when the inputs can move outside the supply rails. Stable bypass capacitance near the supply pins helps reduce supply noise and output disturbance.
This product page combines the manufacturer device data, package information, compatibility details, application guidance, and practical design notes needed to evaluate the LM2903VQDRG4 before PCB design, sourcing, or replacement planning.
Alternatives de remplacement direct pour LM2903VQDRG4 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec LM2903VQDRG4 (même facteur de forme et même empreinte) — différant par Package, Propagation Delay, Comparator Type, Output Type, Automotive Qualification.
LM2903QDRG4
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →LM2903BDRG4
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
LM2903DRG4
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →LM2903VQDRG4Q1
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →LM2903VQDRQ1
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →LM2903VQDRG4 Valeurs maximales et caractéristiques électriques
| Comparator Type | Dual differential comparator |
| Number of Elements | 2 |
| Supply Voltage Range, Single Supply | 2 V to 36 V |
| Supply Voltage Range, Dual Supplies | ±1 V to ±18 V |
| Type de sortie | Open-collector |
| Input Offset Voltage | 15 mV |
| Response Time | 1.3 microseconds |
| Courant d'alimentation | 1 mA |
| Température de fonctionnement | -40 °C to 125 °C |
| Boîtier | 8-SOIC (D), 0.154 inch body width |
| Package Length | 3.90 mm |
| Nombre de broches | 8 |
| Type de montage | Surface mount |
| Automotive Preference | Preferred for automotive grade |
| Tested Supply Voltage | 30 V |
Configuration des broches de LM2903VQDRG4
| Broche 1 | OUT1 — Open-collector output for comparator channel 1 |
| Broche 2 | IN1- — Inverting input for comparator channel 1 |
| Broche 3 | IN1+ — Non-inverting input for comparator channel 1 |
| Broche 4 | GND — Ground connection |
| Broche 5 | IN2+ — Non-inverting input for comparator channel 2 |
| Broche 6 | IN2- — Inverting input for comparator channel 2 |
| Broche 7 | OUT2 — Open-collector output for comparator channel 2 |
| Broche 8 | VCC — Positive supply connection |
Applications typiques
LM2903VQDRG4 convient pour 6 applications: Industrial Overvoltage Detection, Battery Pack Monitoring, Sensor Threshold Conditioning, Automotive Status Monitoring, Window and Level Detection, Relay and Discrete Logic Interface.
Industrial Overvoltage Detection
The LM2903VQDRG4 suits industrial overvoltage detection because it combines two independent differential comparator channels with a 2 V to 36 V supply range and an operating temperature range of -40 °C to 125 °C. One channel can compare a divided feedback signal with a precision reference, while the other monitors another rail or control point. Its 15 mV input offset voltage translates directly into threshold uncertainty at the comparator input, and the 1.3 microsecond response time supports prompt fault detection. The open-collector output can drive a shutdown input, relay, or status latch through an external pull-up resistor.
Recommandé
Battery Pack Monitoring
The LM2903VQDRG4 can monitor upper and lower battery thresholds using its two independent comparator channels. Each channel compares a scaled cell or pack voltage against a reference, and the open-collector outputs can share a wired bus when each output has its own pull-up path. The 36 V enhanced supply capability supports industrial battery systems, subject to transient protection and the device's input common-mode limits. The 1 mA supply current is useful when continuous monitoring must not create an excessive auxiliary load, while the 1.3 microsecond response time supports rapid protection signaling.
Recommandé
Sensor Threshold Conditioning
The LM2903VQDRG4 provides a practical interface between an analog sensor and a digital control system by comparing the sensor voltage with a reference level. A 15 mV input offset value sets the basic precision limit, so resistor networks and reference accuracy should be selected to match the required threshold resolution. Its 1.3 microsecond response time is appropriate for moderately fast event detection rather than high-speed waveform analysis. The open-collector output can connect to a microcontroller input, status LED, or discrete driver when paired with a suitable pull-up resistor.
Recommandé
Automotive Status Monitoring
The LM2903VQDRG4 can support low-voltage discrete status monitoring in automotive-related equipment, provided the system qualification and transient-protection requirements are satisfied. The two channels can monitor separate vehicle signals or implement upper and lower limits around one reference. Its -40 °C to 125 °C operating range covers many industrial and automotive ambient environments, and the open-collector outputs simplify connection to discrete logic. Designers should compare the standard grade with the LM2903VQDRG4Q1 automotive-qualified option before release and include reverse-battery and load-dump protection in the external circuit.
Recommandé
Window and Level Detection
The LM2903VQDRG4 is well suited to simple window-level detection where an analog position or level signal must be checked against two boundaries. One comparator can detect the lower limit and the other the upper limit, producing separate digital indications. Its 15 mV offset and 1.3 microsecond response time provide adequate performance for many slow-moving industrial level or position systems. Because the outputs are open collector, pull-up resistors can establish the digital polarity, and a common bus can be used if only one channel should assert at a time.
Recommandé
Relay and Discrete Logic Interface
The LM2903VQDRG4 can control relay coils and discrete logic when its open-collector output is used as a low-side switching element. A comparator decision controls whether current can flow through the output transistor, and an external pull-up resistor establishes the logic-high state. The 1.3 microsecond response time provides fast decision propagation, although relay-coil transients require external flyback protection. The 2 V to 36 V supply range permits operation from widely distributed industrial rails, while the dual-channel configuration can control or supervise two independent discrete loads.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour LM2903VQDRG4 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | LM2903QDRG4 | LM2903BDRG4 | LM2903DRG4 | LM2903VQDRG4Q1 | LM2903VQDRQ1 |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-SOIC (D) | 8-SOIC (D) - same package | 8-SOIC (D) - same package | 8-SOIC (D) - same package | 8-SOIC (D) - same package | 8-SOIC (D) - same package |
| Comparator Elements | 2 | 2 | 2 | 2 | 2 | 2 |
| Output Type | Open-collector | Open-collector | Open-collector | Open-collector | Open-collector | Open-collector |
Principaux différenciateurs
- Enhanced 36 V supply capability (vs LM2903QDRG4)
- Complete same-footprint family compatibility (vs LM2903BDRG4)
- Lower supply-current Q1 alternative (vs LM2903VQDRQ1)
Notes de conception
Do not omit the external pull-up resistor on either open-collector output. Without it, the output cannot establish a valid logic-high voltage. Select the resistor to match the receiving input's leakage, sink-current capability, bus capacitance, and required rise time. If multiple outputs share a wired bus, ensure that no more than one channel can pull the bus low during normal operation.
Keep the supply voltage within the 2 V to 36 V operating range and account separately for transient events that may exceed the static limit. Place the supply bypass capacitor close to pin 8 and provide a short, low-impedance return path from pin 4. In dual-supply operation, confirm that the positive-to-negative rail span and the positive supply relative to ground satisfy the manufacturer limits.
Route the four differential inputs as short traces and keep them away from switching nodes and the open-collector outputs. The 15 mV input offset specification means that layout-induced pickup can represent a meaningful fraction of the switching threshold. Use a quiet reference source, maintain consistent grounding between the comparator and reference network, and avoid sharing narrow copper paths between sensitive input and output returns.
The 1.3 microsecond response time is suitable for threshold and protection events but should not be treated as a high-speed comparator specification. When driving a large capacitive load, include a suitable pull-up resistor and evaluate the resulting rising edge. For relay or inductive loads, add the required flyback protection and keep the switching current path separate from the comparator input reference.
Informations de conformité
The device is described as preferred for automotive-grade use, but a specific AEC-Q100 qualification statement and RoHS, REACH, lead-free, halogen-free, or conflict-minerals status were not established for the exact LM2903VQDRG4 ordering option.