Texas Instruments

LM2903VQDRG4 - Dual 36V Open-Collector Comparator | TI

MPN: LM2903VQDRG4 ✓ Aktif
2 V to 36 V Vdss 1 mA Id 8-SOIC (D), 0.154 inch body width Package
MOQ: 1 |

LM2903VQDRG4 Genel Bakış

The Texas Instruments LM2903VQDRG4 is a dual differential comparator with two independent comparator channels, a 2 V to 36 V supply-voltage range, and an open-collector output configuration. The device is packaged in an 8-pin SOIC package and is specified for operation from -40 °C to 125 °C. Typical input offset voltage is 15 mV, response time is 1.3 microseconds, and supply current is 1 mA.

A differential voltage comparator is an analog integrated circuit that compares two input voltages and changes its output state when the difference between them crosses a defined threshold. The LM2903 family belongs to the comparator hierarchy within the broader amplifier and signal-conditioning IC category. Its differential inputs allow it to detect positive or negative voltage relationships, while the open-collector output supports wired logic, relay drivers, and interface functions.

The LM2903VQDRG4 provides two independent comparators within one package. Each channel can operate from a single supply or from dual supplies when the total supply span and positive-to-negative rail requirements are satisfied. Open-collector outputs require an external pull-up resistor and can be connected to a common bus when only one output is active at a time. This arrangement is useful when multiple sensing channels must share a digital or microcontroller input.

Key electrical characteristics include a 2 V to 36 V total supply range, 15 mV input offset voltage, 1.3 microsecond response time, and 1 mA supply current. The enhanced-voltage LM2903V version supports operation up to 36 V, which gives designers additional margin for industrial supply transients and automotive-style sensing environments when the board-level protection and operating requirements are appropriate.

Typical uses include overvoltage and undervoltage detection, sensor threshold conditioning, industrial control interfaces, battery monitoring, window or level sensing, and general digital threshold detection. Two independent channels can also be used separately for a high-side and low-side limit, a differential sensor monitor, or a pair of unrelated comparator functions.

For PCB implementation, keep input and output traces short, provide a stable reference or return path, and place the required pull-up resistor close to the open-collector output. Account for input common-mode limits when the inputs can move outside the supply rails. Stable bypass capacitance near the supply pins helps reduce supply noise and output disturbance.

This product page combines the manufacturer device data, package information, compatibility details, application guidance, and practical design notes needed to evaluate the LM2903VQDRG4 before PCB design, sourcing, or replacement planning.

Drop-in alternatifler için LM2903VQDRG4 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller LM2903VQDRG4 (aynı form faktörü ve ayağa oturma) — farklı olan Package, Propagation Delay, Comparator Type, Output Type, Automotive Qualification.

Texas Instruments
Package: 8-pin SOIC
Propagation Delay: 1.3 us
Automotive Qualification: Not stated in the verified manufacturer information
İle Karşılaştır LM2903VQDRG4 →
Texas Instruments
Package: 8-SOIC, 3.90 mm width
Propagation Delay: 0.3 us
Comparator Type: Dual differential voltage comparator
İle Karşılaştır LM2903VQDRG4 →
Texas Instruments
Package: 8-pin SOIC (D)
Propagation Delay: Approximately 1.3 µs
Automotive Qualification: AEC-Q100 Grade 0 and Grade 1
İle Karşılaştır LM2903VQDRG4 →

LM2903QDRG4

✅ Yerleştirme
Texas Instruments
📦 8-SOIC (D)
Dual differential comparator · 2 independent channels · Open collector · 36 V · 2 V to 36 V · 2 V to 36 V · 1.5 V · 0.4 mA typical

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LM2903BDRG4

✅ Yerleştirme
📦 8-SOIC (D)
Same 8-pin footprint and 2-channel comparator count; the B-grade device is identified by Texas Instruments as a drop-in replacement for LM2903.

📋 Katalogda Olmayan Referans Alternatifi

LM2903DRG4

✅ Yerleştirme
Texas Instruments
📦 8-SOIC (D)
Dual differential comparator · 2 · Open-collector · 2 V to 30 V · 30 V · 2 V to 36 V total supply difference · ±38 V · Includes ground

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LM2903VQDRG4Q1

✅ Yerleştirme
Texas Instruments
📦 8-SOIC (D)
Dual differential voltage comparator · 2 channels · 2 V to 36 V · ±1 V to ±18 V · Open-collector, rail-to-rail · 0.4 mA typical per comparator · 0.3 us · AEC-Q100 Grade 0 and Grade 1

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LM2903VQDRQ1

✅ Yerleştirme
Texas Instruments
📦 8-SOIC (D)
Dual differential comparator · 2 channels · Open-collector · 2 V to 36 V · ±1 V to ±18 V · Up to maximum-rated supply voltage · Includes ground · 0.4 mA

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LM2903VQDRG4 Maksimum Değerlendirmeler & Elektriksel Özellikler

Comparator Type Dual differential comparator
Number of Elements 2
Supply Voltage Range, Single Supply 2 V to 36 V
Supply Voltage Range, Dual Supplies ±1 V to ±18 V
Çıkış Türü Open-collector
Input Offset Voltage 15 mV
Response Time 1.3 microseconds
Besleme Akımı 1 mA
İşletim Sıcaklığı -40 °C to 125 °C
Paket 8-SOIC (D), 0.154 inch body width
Package Length 3.90 mm
Pin Sayısı 8
Montaj Türü Surface mount
Automotive Preference Preferred for automotive grade
Tested Supply Voltage 30 V

LM2903VQDRG4 Pin Yapısı

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 OUT1 — Open-collector output for comparator channel 1
Pin 2 IN1- — Inverting input for comparator channel 1
Pin 3 IN1+ — Non-inverting input for comparator channel 1
Pin 4 GND — Ground connection
Pin 5 IN2+ — Non-inverting input for comparator channel 2
Pin 6 IN2- — Inverting input for comparator channel 2
Pin 7 OUT2 — Open-collector output for comparator channel 2
Pin 8 VCC — Positive supply connection

Tipik Uygulamalar

LM2903VQDRG4 için uygundur 6 uygulamas: Industrial Overvoltage Detection, Battery Pack Monitoring, Sensor Threshold Conditioning, Automotive Status Monitoring, Window and Level Detection, Relay and Discrete Logic Interface.

🏭

Industrial Overvoltage Detection

The LM2903VQDRG4 suits industrial overvoltage detection because it combines two independent differential comparator channels with a 2 V to 36 V supply range and an operating temperature range of -40 °C to 125 °C. One channel can compare a divided feedback signal with a precision reference, while the other monitors another rail or control point. Its 15 mV input offset voltage translates directly into threshold uncertainty at the comparator input, and the 1.3 microsecond response time supports prompt fault detection. The open-collector output can drive a shutdown input, relay, or status latch through an external pull-up resistor.

⚡

Battery Pack Monitoring

The LM2903VQDRG4 can monitor upper and lower battery thresholds using its two independent comparator channels. Each channel compares a scaled cell or pack voltage against a reference, and the open-collector outputs can share a wired bus when each output has its own pull-up path. The 36 V enhanced supply capability supports industrial battery systems, subject to transient protection and the device's input common-mode limits. The 1 mA supply current is useful when continuous monitoring must not create an excessive auxiliary load, while the 1.3 microsecond response time supports rapid protection signaling.

🧩

Sensor Threshold Conditioning

The LM2903VQDRG4 provides a practical interface between an analog sensor and a digital control system by comparing the sensor voltage with a reference level. A 15 mV input offset value sets the basic precision limit, so resistor networks and reference accuracy should be selected to match the required threshold resolution. Its 1.3 microsecond response time is appropriate for moderately fast event detection rather than high-speed waveform analysis. The open-collector output can connect to a microcontroller input, status LED, or discrete driver when paired with a suitable pull-up resistor.

🚗

Automotive Status Monitoring

The LM2903VQDRG4 can support low-voltage discrete status monitoring in automotive-related equipment, provided the system qualification and transient-protection requirements are satisfied. The two channels can monitor separate vehicle signals or implement upper and lower limits around one reference. Its -40 °C to 125 °C operating range covers many industrial and automotive ambient environments, and the open-collector outputs simplify connection to discrete logic. Designers should compare the standard grade with the LM2903VQDRG4Q1 automotive-qualified option before release and include reverse-battery and load-dump protection in the external circuit.

📺

Window and Level Detection

The LM2903VQDRG4 is well suited to simple window-level detection where an analog position or level signal must be checked against two boundaries. One comparator can detect the lower limit and the other the upper limit, producing separate digital indications. Its 15 mV offset and 1.3 microsecond response time provide adequate performance for many slow-moving industrial level or position systems. Because the outputs are open collector, pull-up resistors can establish the digital polarity, and a common bus can be used if only one channel should assert at a time.

🔧

Relay and Discrete Logic Interface

The LM2903VQDRG4 can control relay coils and discrete logic when its open-collector output is used as a low-side switching element. A comparator decision controls whether current can flow through the output transistor, and an external pull-up resistor establishes the logic-high state. The 1.3 microsecond response time provides fast decision propagation, although relay-coil transients require external flyback protection. The 2 V to 36 V supply range permits operation from widely distributed industrial rails, while the dual-channel configuration can control or supervise two independent discrete loads.

What are the key specifications of LM2903VQDRG4 that engineers should know?
The LM2903VQDRG4 is a dual differential comparator with a 2 V to 36 V supply range, open-collector outputs, and an 8-pin SOIC package. Its headline electrical characteristics include 15 mV input offset voltage, a 1.3 microsecond response time, and 1 mA supply current. According to the Texas Instruments LM2903V datasheet, the device operates from -40 °C to 125 °C and contains two independent comparator channels.
Where to buy LM2903VQDRG4 online?
Use the Request a Quote form on this page to request LM2903VQDRG4 availability, current lead time, and order details. The manufacturer identifies the device as an active dual differential comparator in the 8-pin SOIC package. A formal quotation is the most suitable way to confirm the exact suffix, packaging format, and delivery schedule for your production requirements.
What is the price of LM2903VQDRG4?
The current commercial terms for LM2903VQDRG4 are shown through the Request a Quote form on this page. The quantity-break figures presented with the listing are refreshed through the platform, so engineers should use the quotation form rather than relying on a static price figure. The request should identify the desired package suffix, annual usage, and delivery schedule for an accurate response.
What is the lead time for LM2903VQDRG4?
The current lead time for LM2903VQDRG4 should be confirmed through the Request a Quote form on this page. The Texas Instruments product record identifies the LM2903VQDRG4 as a dual differential comparator in an 8-pin SOIC package rated for -40 °C to 125 °C. Lead time can vary with order quantity, package form, manufacturing allocation, and the destination required by the buyer.
Is LM2903VQDRG4 in stock?
Request live stock status for LM2903VQDRG4 using the Request a Quote form on this page. The manufacturer lists the LM2903V family as an active dual differential comparator product, and the G4 ordering option is identified in the 8-pin SOIC configuration. Because quantity and regional availability can change, use the quotation workflow for a current allocation rather than a historical inventory indication.
What is the difference between LM2903VQDRG4 and LM2903QDRG4?
The LM2903VQDRG4 is the enhanced-voltage LM2903V option, while LM2903QDRG4 belongs to the standard LM2903 ordering family. Both use the dual-comparator architecture and the 8-pin SOIC package, allowing board-level reuse where their electrical limits meet the design requirement. The LM2903VQDRG4 is the preferred selection when the 36 V enhanced supply range is required.
LM2903VQDRG4 vs LM2903VQDRG4Q1 - which is better for automotive use?
Choose the automotive-qualified LM2903VQDRG4Q1 when a project requires the associated automotive qualification and temperature grade. The LM2903VQDRG4 provides the same dual open-collector comparator architecture in an 8-pin SOIC package, with a 2 V to 36 V supply range and 1.3 microsecond response time. For a non-automotive design, the standard LM2903VQDRG4 is the direct general-purpose choice.
When should I choose LM2903VQDRG4 over LM2903QDRG4?
Choose LM2903VQDRG4 when the circuit can benefit from the enhanced-voltage LM2903V grade or when the standard LM2903 grade is not the intended device for the operating condition. Both parts use the same 8-pin SOIC footprint and provide two differential comparator channels with open-collector outputs. Verify the required supply span, temperature range, qualification level, and production availability against the manufacturer ordering information.
Is LM2903VQDRG4 suitable for industrial sensor and threshold detection?
The LM2903VQDRG4 is suitable for industrial threshold detection when its 2 V to 36 V supply range and -40 °C to 125 °C specification fit the operating environment. Its 15 mV input offset voltage and 1.3 microsecond response time support sensing decisions where moderate precision and response speed are sufficient. Add input protection and verify common-mode limits for sensors exposed to transients.
What is the best drop-in replacement for LM2903VQDRG4?
LM2903QDRG4, LM2903BDRG4, LM2903DRG4, LM2903VQDRG4Q1, and LM2903VQDRQ1 are the closest same-footprint options identified for the LM2903VQDRG4 family. Each uses an 8-pin SOIC configuration with two comparator channels and an open-collector output arrangement. A replacement should be qualified against supply range, offset voltage, response time, temperature grade, automotive requirements, and production status rather than selected from package appearance alone.
Can LM2903VQDRQ1 replace LM2903VQDRG4 without PCB changes?
Yes, LM2903VQDRQ1 is identified as a complete replacement with consistent terminals and an 8-pin SOIC package, so it can be used without PCB changes when its full electrical and qualification requirements are acceptable. It is associated with an 800 microamp supply-current description, while LM2903VQDRG4 is listed at 1 mA. Confirm output behavior, common-mode limits, temperature grade, and lifecycle requirements before substitution.
What is the best onsemi equivalent for LM2903VQDRG4?
The onsemi LM2903M is the relevant same-family equivalent identified by the cross-reference material, but it should not be treated as a drop-in selection until its package and pin arrangement are checked against the 8-pin SOIC LM2903VQDRG4 footprint. The LM2903VQDRG4 uses two independent differential comparators with open-collector outputs, a 2 V to 36 V supply range, and 1 mA supply current. Validate all of those requirements against the candidate datasheet.
Where to download the LM2903VQDRG4 datasheet PDF?
Download the authoritative LM2903V family documentation from the Texas Instruments product page linked on this page. The manufacturer product record is the preferred starting point because it connects the LM2903VQDRG4 ordering option with current product status, package details, and supporting documentation. Use the LM2903V datasheet for pin assignments, electrical limits, open-collector pull-up guidance, and supply configuration notes.
Where can I find the LM2903VQDRG4 pinout?
The LM2903VQDRG4 pinout is identified by the 8-pin SOIC package configuration on the Texas Instruments product page and in the manufacturer LM2903V datasheet. For the standard dual open-collector LM2903 arrangement, the eight pins comprise two comparator output pins, four differential input pins, one ground pin, and one supply pin. Confirm the numbered orientation against the package drawing before routing the PCB.
What can replace LM2903VQDRG4?
The closest documented replacements are the 8-pin SOIC members of the TI LM2903 family, including LM2903QDRG4, LM2903BDRG4, LM2903DRG4, LM2903VQDRG4Q1, and LM2903VQDRQ1. A valid replacement must preserve the dual differential inputs, open-collector outputs, supply-voltage range, temperature grade, and pin arrangement. Review the manufacturer comparison guidance before approving a substitution for production.

Mühendislik referans verileri: LM2903VQDRG4 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose LM2903VQDRG4 for dual-channel threshold detection or protection circuits that benefit from its 2 V to 36 V enhanced supply range, 15 mV input offset, 1.3 microsecond response, and -40 °C to 125 °C operating range. Select LM2903QDRG4 when the standard LM2903 voltage grade is sufficient and a board-level pin-compatible alternative is desired. LM2903BDRG4 is useful when the TI-documented LM2903 replacement relationship is specifically required. LM2903DRG4 offers another standard-family ordering option in the same 8-pin SOIC footprint. For automotive qualification, compare LM2903VQDRG4Q1 with the standard device and review the complete qualification and environmental requirements. LM2903VQDRQ1 can reduce supply current by 20%, from 1 mA to 800 microamps, while retaining the same package and channel count. In every case, verify the pin arrangement, input common-mode range, output pull-up requirements, temperature grade, and lifecycle status before production release.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün LM2903QDRG4 LM2903BDRG4 LM2903DRG4 LM2903VQDRG4Q1 LM2903VQDRQ1
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-SOIC (D) 8-SOIC (D) - same package 8-SOIC (D) - same package 8-SOIC (D) - same package 8-SOIC (D) - same package 8-SOIC (D) - same package
Comparator Elements 2 2 2 2 2 2
Output Type Open-collector Open-collector Open-collector Open-collector Open-collector Open-collector

Ana Farklılayıcılar

  • Enhanced 36 V supply capability (karşılaştırma:LM2903QDRG4)
  • Complete same-footprint family compatibility (karşılaştırma:LM2903BDRG4)
  • Lower supply-current Q1 alternative (karşılaştırma:LM2903VQDRQ1)

Tasarım Notları

Do not omit the external pull-up resistor on either open-collector output. Without it, the output cannot establish a valid logic-high voltage. Select the resistor to match the receiving input's leakage, sink-current capability, bus capacitance, and required rise time. If multiple outputs share a wired bus, ensure that no more than one channel can pull the bus low during normal operation.

Keep the supply voltage within the 2 V to 36 V operating range and account separately for transient events that may exceed the static limit. Place the supply bypass capacitor close to pin 8 and provide a short, low-impedance return path from pin 4. In dual-supply operation, confirm that the positive-to-negative rail span and the positive supply relative to ground satisfy the manufacturer limits.

Route the four differential inputs as short traces and keep them away from switching nodes and the open-collector outputs. The 15 mV input offset specification means that layout-induced pickup can represent a meaningful fraction of the switching threshold. Use a quiet reference source, maintain consistent grounding between the comparator and reference network, and avoid sharing narrow copper paths between sensitive input and output returns.

The 1.3 microsecond response time is suitable for threshold and protection events but should not be treated as a high-speed comparator specification. When driving a large capacitive load, include a suitable pull-up resistor and evaluate the resulting rising edge. For relay or inductive loads, add the required flyback protection and keep the switching current path separate from the comparator input reference.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The device is described as preferred for automotive-grade use, but a specific AEC-Q100 qualification statement and RoHS, REACH, lead-free, halogen-free, or conflict-minerals status were not established for the exact LM2903VQDRG4 ordering option.

İlgili Aramalar

LM2903VQDRG4 datasheet LM2903VQDRG4 datasheet pdf LM2903VQDRG4 pinout LM2903VQDRG4 specifications Texas Instruments LM2903VQDRG4 LM2903VQDRG4 36V comparator LM2903VQDRG4 8-SOIC LM2903VQDRG4 application circuit LM2903VQDRG4 vs LM2903QDRG4 LM2903VQDRG4 equivalent LM2903VQDRG4 replacement LM2903VQDRG4 price LM2903VQDRG4 stock LM2903VQDRG4 open collector pull-up

İlgili Bileşenler ve Terimler

Texas Instruments LM2903VQDRG4 LM2903V LM2903QDRG4 LM2903BDRG4 LM2903DRG4 LM2903VQDRG4Q1 LM2903VQDRQ1 dual differential comparator comparator analog integrated circuit signal-conditioning IC open-collector output input offset voltage response time supply current wire logic 8-SOIC SOIC package surface-mount package industrial overvoltage detection battery monitoring sensor threshold conditioning automotive status monitoring
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle