Texas Instruments

LM339ADBR - 4-Channel 30V Open-Collector Comparator | Texas Instruments

Référence : LM339ADBR ✓ Actif
2V to 30V Vdss 3.5nA Id 14-pin SSOP Package
MOQ : 1 |

LM339ADBR Présentation

Texas Instruments LM339ADBR is a four-channel differential voltage comparator operating from a single 2V to 30V supply, with an open-collector output stage and a 14-pin SSOP package. It provides a maximum rated supply voltage of 38V, an input offset voltage as low as 0.37mV, input bias current of 3.5nA, and supply current of 200µA per comparator.

A quad differential comparator is an analog integrated circuit that compares two input voltages and changes its output state when their difference crosses a defined threshold. The LM339 belongs to the comparator hierarchy within analog ICs and broader semiconductor signal-conditioning systems. Its four independent channels can compare unrelated signals because the devices share only power and ground connections.

The open-collector outputs support wired-AND operation, level translation, and direct connection to pull-up resistors. Low input offset voltage of 0.37mV supports accurate switching decisions near the comparison threshold, while 3.5nA input bias current reduces source-loading effects in high-impedance sensing circuits. A 2V minimum supply permits operation from low-voltage rails, and the 30V operating range supports higher-voltage industrial systems. The B-version family also supports maximum ratings up to 38V.

Each channel provides independent comparison inputs, allowing one device to implement four threshold, sorting, window-detection, or fault-monitoring functions. The open-collector architecture is useful when several comparator outputs must share a bus, although an external pull-up resistor is required for normal logic-high operation. Quiescent current of 200µA per comparator supports low-power monitoring systems when the device is operated near light-load conditions.

Typical uses include industrial sensor monitoring, battery threshold detection, power-supply sequencing, overvoltage and undervoltage protection, window comparators, and logic interfaces. The low offset and bias-current characteristics are particularly useful when the source impedance and input voltage accuracy are important. The 14-pin SSOP package also supports compact board layouts where a larger SOIC or DIP package would be unnecessary.

For reliable operation, select pull-up resistors according to the required rise time and sink-current budget, keep input and output paths separated to prevent switching transients from affecting comparisons, and observe the absolute maximum supply rating of 38V. The open-collector stage does not actively drive a logic-high state, so every application must include an appropriate pull-up arrangement or relay interface.

This product record combines the electrical characteristics, package details, sourcing information, drop-in family options, and practical circuit guidance needed to evaluate the LM339ADBR in new comparator designs.

Alternatives de remplacement direct pour LM339ADBR — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec LM339ADBR (même facteur de forme et même empreinte) — différant par Differential Input Voltage Range, Number of Channels, Output Type, Package, Common-Mode Input Voltage Range.

Texas Instruments
Differential Input Voltage Range: Up to maximum-rated supply voltage (36 V)
Number of Channels: 4
Package: 14-SOIC
Comparer avec LM339ADBR →
Texas Instruments
Differential Input Voltage Range: -38 V to +38 V
Number of Channels: 4 channels
Output Type: Open collector
Comparer avec LM339ADBR →

LM339DBRE4

✅ Remplacement direct
Texas Instruments
📦 14-pin SSOP
Quad differential voltage comparator · 4 channels · Single supply or dual supply · 30 V · 2 V to 36 V · -38 V to +38 V · 0.8 mA typical · Open collector

Contactez-nous pour le prix

Voir la fiche technique →

LM2901DBR

✅ Remplacement direct
📦 14-pin SSOP
LM2901 family temperature-grade ordering rather than LM339A; 4 channels and open-collector outputs are retained, with a different operating-temperature requirement

📋 Alternative de référence (hors catalogue)

LM239DBR

✅ Remplacement direct
📦 14-pin SSOP
LM239 family temperature-grade ordering rather than LM339A; all 4 comparator channels and open-collector output stages remain in the same 14-pin SSOP footprint

📋 Alternative de référence (hors catalogue)

LM2901ADBR

✅ Remplacement direct
📦 14-pin SSOP
LM2901 family with A-grade ordering rather than LM339A; comparator count remains 4 and the output architecture remains open-collector

📋 Alternative de référence (hors catalogue)

LM239ADBR

✅ Remplacement direct
📦 14-pin SSOP
LM239 family with A-grade ordering rather than LM339A; comparator count remains 4 and the output architecture remains open-collector

📋 Alternative de référence (hors catalogue)

LM339ADBR Valeurs maximales et caractéristiques électriques

Comparator Type Quad differential voltage comparator
Number of Channels 4 independent channels
Supply Voltage Range 2V to 30V
Maximum Rated Supply Voltage 38V
Type de sortie Open-collector
Input Offset Voltage 0.37mV
Input Bias Current 3.5nA
Courant d'alimentation 200µA per comparator
Common-Mode Input Voltage Range Includes ground
Differential Input Voltage Range Equal to the maximum-rated supply voltage, up to ±38V
ESD Rating 2kV HBM
Logic Compatibility Compatible with TTL, MOS, and CMOS
Boîtier 14-pin SSOP
Type de montage Surface mount
Statut RoHS RoHS3 compliant
Lead-Free Status Lead free

Configuration des broches de LM339ADBR

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
Broche 1 OUT1 — Comparator 1 open-collector output
Broche 2 IN1- — Comparator 1 inverting input
Broche 3 IN1+ — Comparator 1 noninverting input
Broche 4 GND — Ground connection
Broche 5 IN2+ — Comparator 2 noninverting input
Broche 6 IN2- — Comparator 2 inverting input
Broche 7 OUT2 — Comparator 2 open-collector output
Broche 8 OUT3 — Comparator 3 open-collector output
Broche 9 IN3- — Comparator 3 inverting input
Broche 10 IN3+ — Comparator 3 noninverting input
Broche 11 GND — Ground connection
Broche 12 IN4+ — Comparator 4 noninverting input
Broche 13 IN4- — Comparator 4 inverting input
Broche 14 OUT4 — Comparator 4 open-collector output

Applications typiques

LM339ADBR convient pour 6 applications: Industrial Sensor Threshold Monitoring, Battery Overvoltage and Undervoltage Protection, Power Supply Sequencing and Rail Monitoring, Window Comparator and Signal Qualification, Automotive and Heavy Equipment Interlock, Digital Logic Interface and Level Translation.

🏭

Industrial Sensor Threshold Monitoring

The LM339ADBR fits industrial sensor monitoring because its four independent differential channels can establish separate warning, alarm, or control thresholds. Its 3.5nA input bias current limits the loading imposed on high-impedance sensors, while the A-grade 0.37mV input offset supports decisions close to the reference voltage. The device accepts a single supply from 2V to 30V, allowing it to operate directly from many industrial rails. Each channel compares a sensor signal with a local reference and drives an open-collector output. Pull-up resistors convert the open-collector state into a logic level, and the shared four-channel package reduces component count compared with four separate comparators.

⚡

Battery Overvoltage and Undervoltage Protection

The LM339ADBR can implement independent upper and lower battery thresholds using two of its four comparison channels. Its 2V-to-30V supply range supports low-voltage battery systems, and the 38V maximum rated supply provides additional transient headroom when protection devices are present. The 0.37mV offset helps reduce the error introduced when a battery voltage is compared against a precision reference. Additional channels can supervise charger status, load presence, or system initialization. Because every output is open-collector, the protection signals can be combined into a wired-AND fault bus or pulled up to the system logic voltage without requiring four dedicated input buffers.

🔋

Power Supply Sequencing and Rail Monitoring

The LM339ADBR is suitable for monitoring multiple supply rails and sequencing controller enable signals. Its four independent channels can compare each rail against a reference, while the open-collector outputs can provide wired-AND fault signaling or individual active-low control signals. The wide 2V-to-30V operating range covers low-voltage processor rails and higher-voltage industrial systems. Its 200µA per-comparator supply current is useful when continuous monitoring is required across multiple rails. External pull-up resistors should be selected to match the controlled interface voltage and sink-current requirements. Designers should also allow sufficient logic threshold margin so that normal rail tolerance does not cause repeated comparator transitions.

📊

Window Comparator and Signal Qualification

The LM339ADBR can implement a signal-quality window detector by using two comparator channels to establish upper and lower limits. Its low 3.5nA input bias current is beneficial when the monitored signal comes from a high-impedance source, and its 0.37mV offset supports precise limit placement. The remaining two channels can monitor auxiliary conditions or provide independent fault flags. Open-collector outputs make it practical to combine both limit states into one fault output or route separate indications to a controller. The design must account for input common-mode limits, output pull-up behavior, and the response characteristics of the compared signals rather than treating the comparator as a general-purpose amplifier.

🚗

Automotive and Heavy Equipment Interlock

The LM339ADBR can support machine-interlock and fault-detection functions where multiple discrete conditions must be consolidated. Four open-collector channels can monitor switches, sensor lines, and safety-related thresholds, with wired-AND outputs providing a compact common fault indication. The 2V-to-30V supply range accommodates many 12V and 24V systems, and the 38V maximum rated supply supports protected supply rails. The low 3.5nA input bias current reduces disturbance of resistive sensing networks. Automotive qualification is not established for this ordering, so an explicitly qualified comparator should be selected when formal automotive requirements apply. Input protection and transient filtering remain essential in vehicle or industrial environments.

🧩

Digital Logic Interface and Level Translation

The LM339ADBR can serve as a robust open-collector interface between analog sensing circuits and digital control logic. Each comparator channel can translate a thresholded signal to the target logic domain by using a pull-up resistor connected to the desired logic voltage. The open-collector output supports TTL, MOS, and CMOS compatibility according to the Texas Instruments LM339A documentation. Four channels reduce board area when several digital status signals must be conditioned. The 0.37mV offset supports accurate threshold decisions, although comparator outputs should not be used for high-speed data beyond the device's specified response characteristics. Select pull-up values carefully to balance rise time, power consumption, bus capacitance, and output sink-current capability.

Récapitulatif des produits recommandés

LM339DBR Same-family standard-grade comparator Utilisé dans : Industrial Sensor Threshold Monitoring, Power Supply Sequencing and Rail Monitoring, Window Comparator and Signal Qualification, Digital Logic Interface and Level Translation LM2901DBR Same-family temperature-grade comparator Utilisé dans : Industrial Sensor Threshold Monitoring, Power Supply Sequencing and Rail Monitoring, Automotive and Heavy Equipment Interlock LM239DBR Same-family temperature-grade comparator Utilisé dans : Industrial Sensor Threshold Monitoring, Automotive and Heavy Equipment Interlock LM2901ADBR A-grade family option for battery protection Utilisé dans : Battery Overvoltage and Undervoltage Protection, Window Comparator and Signal Qualification, Digital Logic Interface and Level Translation LM239ADBR A-grade family option for battery protection Utilisé dans : Battery Overvoltage and Undervoltage Protection, Window Comparator and Signal Qualification, Digital Logic Interface and Level Translation
What is the operating voltage range of LM339ADBR?
The LM339ADBR operates from a single supply of 2V to 30V. According to the Texas Instruments LM339A product page, its common-mode input voltage range includes ground, while the differential input voltage range can extend to the maximum-rated supply voltage of 38V. This wide operating range supports both low-voltage embedded systems and higher-voltage industrial monitoring circuits.
What are the key specifications of LM339ADBR that engineers should know?
The LM339ADBR is a four-channel differential comparator with an open-collector output, a 2V-to-30V supply range, and a 14-pin SSOP package. Texas Instruments specifies a maximum rated supply voltage of 38V, input offset voltage as low as 0.37mV, input bias current of 3.5nA, and supply current of 200µA per comparator. These characteristics make it suitable for precision thresholding and low-power monitoring.
Where can I download the LM339ADBR datasheet PDF?
The official LM339ADBR datasheet is available through the Texas Instruments LM339A datasheet page at https://www.ti.com/lit/gpn/LM339A. It covers the LM339B, LM2901B, LM339, LM239, LM139, and LM2901 quad differential comparator families. Use the LM339A ordering information to confirm the LM339ADBR grade and 14-pin SSOP package configuration.
Where can I find the LM339ADBR pinout?
The LM339ADBR pinout is documented in the Texas Instruments LM339A datasheet, whose official link is https://www.ti.com/lit/gpn/LM339A. The 14-pin SSOP device contains four independent comparator sections, with each section using two differential inputs and one open-collector output. Use the pin-description table when assigning PCB tracks and connecting pull-up resistors.
How does the LM339ADBR open-collector output work?
The LM339ADBR output actively sinks current when the comparator changes state but does not actively source a logic-high voltage. According to the Texas Instruments LM339A product page, the output is compatible with TTL, MOS, and CMOS logic. Each open-collector output requires an external pull-up resistor, and multiple outputs can be wired together to implement wired-AND behavior.
What can replace the LM339ADBR without changing the PCB?
The closest drop-in choices are the other Texas Instruments LM339-family 14-pin SSOP orderings identified in the LM339A family documentation, including LM339DBR, LM2901DBR, and LM239DBR. Their channel count, open-collector architecture, and supply range remain compatible, but the grade suffix changes temperature or device-family requirements. Confirm the exact ordering table and operating-temperature grade before production use.
Is LM339DBR a drop-in replacement for LM339ADBR?
The LM339DBR can serve as a pin-compatible LM339ADBR alternative when the standard device grade meets the design requirements. Both devices provide four differential comparator channels with open-collector outputs in a 14-pin SSOP package. The measurable functional distinction is the grade designation: the A version provides the improved offset specification of 0.37mV, while the D version represents the standard-grade ordering.
When should I choose LM339ADBR instead of LM339DBR?
Choose LM339ADBR when the application benefits from the A-grade low input offset of 0.37mV and otherwise uses the standard 14-pin SSOP LM339 footprint. Choose the standard-grade LM339DBR when that tighter offset specification is not needed and the ordering offers a better fit for the required temperature grade or sourcing conditions. Verify the full electrical and temperature ratings before substitution.
Is LM339ADBR suitable for industrial sensor monitoring?
The LM339ADBR is suitable for industrial sensor monitoring when the sensed signal remains within the device's common-mode and differential input limits. Its 3.5nA input bias current minimizes loading of high-impedance sensors, and its 0.37mV offset improves threshold accuracy. The 2V-to-30V operating range also supports multiple industrial supply levels, subject to transient protection.
LM339ADBR vs LM2901DBR: which is better for a wide-temperature design?
The LM2901DBR is the better candidate when the design specifically requires the LM2901 temperature-grade family and the same 14-pin SSOP footprint. The LM339ADBR is appropriate when the A-grade offset of 0.37mV is important. Both provide four open-collector comparator channels and support single-supply operation, but their ordering suffixes identify different device-grade requirements.
What is the best cross-brand equivalent for LM339ADBR?
A cross-brand equivalent should provide four open-collector comparators in a 14-pin SSOP package while matching the 2V-to-30V supply range and input limits. The cross-reference results did not identify a specific cross-brand part that could be confirmed as pin-for-pin compatible with the LM339ADBR. Use the Request a Quote form on this page for engineering review of an alternative rather than assuming that a similar comparator is drop-in compatible.
How much current does each LM339ADBR comparator consume?
Each LM339ADBR comparator uses 200µA of supply current according to the Texas Instruments LM339B family description. Because the device contains four independent comparator channels, the quoted value is specified per comparator rather than as an aggregate four-channel figure. Actual board consumption also depends on operating conditions and the current drawn by the external pull-up networks.
Does the LM339ADBR require a pull-up resistor?
Yes, the LM339ADBR requires an external pull-up resistor for each open-collector output that must reach a logic-high voltage. The resistor should be selected according to the bus voltage, required rise time, and maximum output sink current. Pull-up paths also permit wired-AND operation, but designers must account for the combined sink-current demand when multiple comparators assert the same node.
Where can I buy LM339ADBR and check its lead time?
Use the Request a Quote form on this page to request the current LM339ADBR price, stock position, lead time, and order quantities. The component is currently listed as in stock by a catalog source, but availability and lead time can change with purchasing volume and packaging requirements. The form allows the request to be matched to the exact LM339ADBR ordering code rather than a generic LM339 family variant.
Is the LM339ADBR RoHS compliant?
The LM339ADBR is listed as RoHS3 compliant and lead free by its catalog record. According to the Texas Instruments LM339A documentation, the device is also designed for compatibility with TTL, MOS, and CMOS outputs. Automotive qualification, REACH status, halogen-free status, and conflict-minerals status are not established by the available product information.

Données de référence d'ingénierie pour LM339ADBR — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the LM339ADBR when the design requires four independent, general-purpose comparators in a 14-pin SSOP package and benefits from the A-grade 0.37mV input offset. Its 2V-to-30V supply range, 3.5nA input bias current, and open-collector outputs make it suitable for industrial threshold detection, rail monitoring, battery protection, and signal qualification. Choose the LM339DBR when the standard-grade ordering is sufficient and its electrical characteristics better match the required design. Choose an LM2901 or LM239 family ordering when that specific device family's temperature-grade requirements are appropriate. All listed alternatives retain four open-collector comparator channels and the 14-pin SSOP footprint, but they are not interchangeable without checking the ordering table, operating-temperature grade, offset limits, and absolute maximum ratings. Cross-brand substitutions should be approved only after confirming pinout, output architecture, supply range, input limits, and propagation behavior.

Comparaison avec les alternatives

Paramètre Ce produit LM339DBR LM2901DBR LM239DBR LM2901ADBR LM239ADBR
Package 14-pin SSOP 14-pin SSOP 14-pin SSOP 14-pin SSOP 14-pin SSOP 14-pin SSOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Comparator Channels 4 4 4 4 4 4
Supply Voltage Range 2V to 30V 2V to 30V 2V to 30V 2V to 30V 2V to 30V 2V to 30V
Output Type Open-collector Open-collector Open-collector Open-collector Open-collector Open-collector
Device Family and Grade LM339A grade LM339 standard grade LM2901 family LM239 family LM2901 A grade LM239 A grade

Principaux différenciateurs

  • Improved A-grade input offset (vs LM339DBR)
  • Four independent channels in one package (vs LM2901DBR)
  • Wide single-supply operating range (vs LM239ADBR)
  • Open-collector wired-AND capability (vs LM2901ADBR)

Notes de conception

The open-collector outputs require external pull-up resistors. Select each resistor according to the target logic voltage, bus capacitance, required rise time, and maximum sink current. Do not allow an output to remain in a high-impedance state without a defined pull-up path, and ensure that the pull-up voltage remains within the output and device ratings.

Place pull-up resistors close to the relevant comparator outputs to minimize trace capacitance and obtain a predictable rising edge. Keep comparator inputs away from switching nodes and output traces, because the open-collector transitions can produce coupling into adjacent input paths. Connect the ground pins to a low-impedance ground plane and provide local supply bypassing near the device.

The 3.5nA input bias current makes the LM339ADBR suitable for many high-impedance sensing networks, but source resistance still forms an offset with bias current. Estimated: an input source of 10kΩ produces an input-current error of 35µV, while 1MΩ produces 3.5mV. Use the input-bias-current limit and source impedance when calculating comparison-point error.

The quoted 200µA supply current applies to each comparator channel, so four active channels can consume more current than a single-channel estimate suggests. Estimated: at 30V, 200µA per channel corresponds to 6mW per channel and 24mW for four channels before pull-up loading is included. Include pull-up current in the overall power budget.

Informations de conformité

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Qualified
Sans plomb
Yes
Sans halogène
Unknown
Minerais de conflit
Unknown

The catalog record identifies the LM339ADBR as RoHS3 compliant and lead free. Automotive qualification, REACH status, halogen-free status, and conflict-minerals status are not established by the available product information.

Données vérifiées le : 2026-11-13 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

LM339ADBR datasheet LM339ADBR pinout LM339ADBR datasheet pdf LM339ADBR equivalent LM339ADBR replacement LM339ADBR cross reference LM339ADBR vs LM339DBR LM339ADBR footprint LM339ADBR price LM339ADBR stock Texas Instruments LM339ADBR LM339ADBR application circuit

Composants & termes associés

Texas Instruments LM339ADBR LM339A LM339DBR LM2901DBR LM239DBR LM2901ADBR LM239ADBR quad differential comparator voltage comparator analog integrated circuit semiconductor open-collector output wired-AND logic input offset voltage input bias current supply current 14-pin SSOP SSOP package family surface-mount package industrial sensor monitoring battery protection power-supply sequencing RoHS TTL logic CMOS logic
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ