STMicroelectronics

LM358AWST - Dual Low-Power Op Amp | STMicroelectronics

Référence : LM358AWST ✓ Actif
2 amplifiers Package
MOQ : 1 |

LM358AWST Présentation

The STMicroelectronics LM358AWST is a dual, general-purpose operational amplifier with two amplifier circuits in an 8-pin MiniSO package. The device is identified as a low-power op amp and is intended for general signal-conditioning applications. Its package dimensions, electrical limits, supply range, offset characteristics, and temperature ratings should be confirmed against the STMicroelectronics datasheet before final qualification.

An operational amplifier is an active semiconductor device that amplifies the voltage difference between its inverting and non-inverting inputs. The LM358 family belongs to the operational-amplifier hierarchy, which includes instrumentation amplifiers, buffer amplifiers, comparators, and analog signal-chain ICs. Its dual architecture provides two amplifiers in one package, reducing board area while simplifying common power-supply and grounding arrangements.

The LM358AWST is specifically identified as a standard, general-purpose amplifier with two circuits. That makes it useful for functions such as voltage buffering, current-to-voltage conversion, sensor conditioning, differential amplification, and basic active filtering. Because it contains two amplifier sections, one package can support two related analog channels or two stages of a larger signal-processing circuit.

Its MiniSO-8 form factor supports compact surface-mount PCB construction while exposing two complete amplifier channels. The exposed package area of the MiniSO family also provides a thermal path to the PCB, although actual heat dissipation depends on copper area, adjacent components, ambient temperature, and output drive. Designers should preserve the manufacturer’s recommended pad and land-pattern dimensions rather than treating it as a generic SOIC footprint.

Typical uses include industrial sensor interfaces, buffered control signals, low-frequency analog measurement paths, audio preamplifier stages, power-supply monitoring, and general-purpose gain stages. In each case, input common-mode range, output swing, unity-gain stability, noise, and supply requirements must be checked against the circuit’s operating conditions. The LM358AWST is especially relevant where two general-purpose channels are needed without allocating separate single amplifier packages.

For a new layout, route input and output traces away from switching nodes and high-current return paths, connect decoupling capacitors close to the supply pins, and verify the complete analog signal range at worst-case supply voltage and temperature. If the PCB revision is fixed, use the pin-description table and land-pattern drawing in the manufacturer datasheet to confirm every connection before substitution or sourcing an equivalent.

Alternatives de remplacement direct pour LM358AWST — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

LM358WST

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 MiniSO-8
Same dual general-purpose configuration and 8-pin MiniSO footprint; ordering-grade and temperature limits require confirmation, while channel count and pin count differ by 0%.

📋 Alternative de référence (hors catalogue)

LM358YDT

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 MiniSO-8
Same dual general-purpose MiniSO-8 family architecture; ordering-grade and temperature limits require confirmation, while channel count and pin count differ by 0%.

📋 Alternative de référence (hors catalogue)

LM358AWST Valeurs maximales et caractéristiques électriques

Amplifier Type General-purpose operational amplifier
Number of Amplifier Circuits 2 circuits
Number of Amplifiers per Package 2 amplifiers
Power Class Low power
Package Type 8-pin MiniSO
Total Pin Count 8 pins
Type de montage Surface mount

Configuration des broches de LM358AWST

MSOP-8 Package Pinout Diagram MSOP-8 3x3mm, P0.65mm, JEDEC MO-187. 1 8 2 7 3 6 4 5 MSOP-8
Broche 1 OUT1 — Output of amplifier channel 1
Broche 2 IN1- — Inverting input of amplifier channel 1
Broche 3 IN1+ — Non-inverting input of amplifier channel 1
Broche 4 GND — Device ground
Broche 5 IN2+ — Non-inverting input of amplifier channel 2
Broche 6 IN2- — Inverting input of amplifier channel 2
Broche 7 OUT2 — Output of amplifier channel 2
Broche 8 VCC — Positive supply connection

Applications typiques

LM358AWST convient pour 6 applications: Industrial Sensor Conditioning, Audio Preamplifier Stages, Buffered Power-Supply Monitoring, Active Filter and Control Loops, Current-to-Voltage Conversion, Portable and Edge-Device Signal Conditioning.

🏭

Industrial Sensor Conditioning

LM358AWST fits two-channel industrial sensor conditioning when the sensor outputs remain within the amplifier’s specified input common-mode range. One channel can amplify or buffer a low-level sensor signal while the second channel can provide offset correction, gain, or an active filter. The dual 8-pin MiniSO package reduces board area and shares supply routing, but the design must verify input bias current, offset voltage, output swing, noise, and stability at the actual 5 V or other operating supply. Decoupling capacitors should be placed close to the supply and ground pins, and sensitive input traces should remain away from switching nodes and motor-return paths.

🎧

Audio Preamplifier Stages

The LM358AWST can provide two general-purpose low-frequency preamplifier stages for microphone, line-level, or instrument signals. Its dual architecture allows a balanced or multi-stage layout without using two separate packages, while the MiniSO-8 footprint supports compact analog boards. Because the device is not characterized in the confirmed material as a low-noise audio-specific amplifier, noise and distortion must be checked against the signal budget before use. Stable feedback resistors, adequate bypassing, controlled return paths, and verification of output headroom are essential when processing small signals with limited supply voltage.

⚡

Buffered Power-Supply Monitoring

LM358AWST is suitable for buffering two power-supply or rail-monitoring signals when the monitored voltages fit the specified input common-mode range. One channel may follow a midpoint generated by a resistor divider, while the other can buffer a temperature, current-sense, or fault signal for an analog controller. The 8-pin MiniSO package provides a compact implementation, and both channels operate from the same package supply. Designers should check input bias effects on high-impedance dividers, ensure the output does not approach its swing limits, and provide local supply bypassing to prevent switching or load-transient noise from affecting the monitored signals.

🔧

Active Filter and Control Loops

LM358AWST can implement two active-filter or control-loop sections when its frequency response and stability characteristics suit the intended gain and phase margin. The dual circuit provides independent channels for cascaded filtering, proportional control, or error amplification in a compact 8-pin MiniSO package. Component tolerances directly influence cutoff frequency and closed-loop behavior, so R-2R networks should use suitable resistor accuracy and stability. The implementation should also account for output loading, supply variation, input transient limits, and the distinction between unity-gain stability and operation with noise gain above one.

📱

Current-to-Voltage Conversion

LM358AWST can implement a transimpedance stage for a photodiode, sensor, or precision resistor-based current measurement. One channel provides the inversion and current-to-voltage conversion, while the second can add gain, offset correction, or a test point. The MiniSO-8 package helps minimize board area, but feedback impedance and stray capacitance strongly influence bandwidth and stability. Use the manufacturer’s stability and noise information to select the feedback network, place the input device close to the amplifier, keep the summing node compact, and verify compliance voltage and output swing under the largest expected current.

🧩

Portable and Edge-Device Signal Conditioning

LM358AWST is appropriate for compact portable or edge devices that need two general-purpose analog channels beside a digital controller. It can buffer sensor inputs, scale ADC driver signals, or condition control feedback while occupying only one 8-pin MiniSO package. Low power is explicitly identified as a characteristic of the device, although the actual system-level consumption depends on supply voltage, quiescent current, channel activity, load, and operating temperature. Keep the analog supply clean, use the smallest practical input-node capacitance, and validate input and output ranges across battery conditions and startup transients.

What is the LM358AWST?
The LM358AWST is a STMicroelectronics dual, general-purpose operational amplifier with two amplifier circuits packaged in an 8-pin MiniSO surface-mount package. STMicroelectronics describes the LM358 family as low-power operational amplifiers. It is suitable for common analog functions such as buffering, amplification, active filtering, sensor interfacing, and voltage-to-current or current-to-voltage conversion when its electrical limits are verified against the manufacturer datasheet.
What package and pin count does LM358AWST use?
The LM358AWST uses an 8-pin MiniSO package and is designed for surface-mount assembly. Its two amplifier sections share package-level supply and ground connections, while each channel retains its own pair of inputs and output. The MiniSO-8 footprint is more compact than a conventional SOIC-8 package, so PCB designers should use the manufacturer land pattern rather than assuming standard SOIC-8 dimensions or pad geometry.
Where can I download the LM358AWST datasheet?
The LM358AWST datasheet can be downloaded from the document linked on this page or through the STMicroelectronics product documentation associated with the LM358AWST ordering information. The datasheet is the controlling document for the complete pin-description table, recommended land pattern, electrical characteristics, operating limits, and application information. Engineers should confirm the revision associated with the ordered device before releasing a production design.
Where can I find the LM358AWST pinout?
The LM358AWST pinout is documented in the pin-description table of the STMicroelectronics LM358AWST datasheet. The device contains two general-purpose operational-amplifier channels in an 8-pin MiniSO package. Use the manufacturer table to confirm each inverting input, non-inverting input, output, supply, and ground connection, and cross-check those assignments against the PCB footprint before fabrication.
What are the key specifications of LM358AWST that engineers should know?
The principal confirmed identifiers for LM358AWST are its two amplifier circuits, general-purpose function, low-power classification, and 8-pin MiniSO package. It is a dual operational amplifier rather than a quad device. Supply voltage, offset voltage, bias current, bandwidth, slew rate, input common-mode range, output swing, and temperature limits should be taken from the manufacturer datasheet because those figures can vary with grade and test conditions.
Where to buy LM358AWST online?
The LM358AWST can be requested through the Request a Quote form on this XAIPART page. The form is the appropriate route for current commercial availability, order quantity, and delivery scheduling without relying on a potentially stale catalog listing. For production qualification, specify the exact LM358AWST ordering code, required quantities, shipment destination, and target date when submitting the request.
What is the price of LM358AWST?
Current pricing for LM358AWST is best obtained through the Request a Quote form on this XAIPART page. The form reflects current sourcing conditions and can account for order quantity, delivery packaging, and shipment requirements. Buyers should provide the exact MPN, quantity, and any required traceability or date-code constraints rather than relying on an outdated listing or a starting-from amount.
What is the lead time for LM358AWST?
The current lead time for LM358AWST should be requested through the Request a Quote form on this XAIPART page. Lead time can vary with order quantity, scheduled delivery, and the chosen shipment method. Include your required quantity, production start date, ship-to country, and any packaging or traceability requirements so the supplier can respond with a practical schedule.
Is LM358AWST in stock?
LM358AWST availability should be confirmed through the Request a Quote form on this XAIPART page. The form provides a current channel for checking stock allocation and delivery timing for the exact MPN. For a new build, submit the required quantity and schedule; for a shortage allocation, include the original order details and approved manufacturer change documentation if the requested part number has changed.
Can LM358WST replace LM358AWST?
LM358WST is a same-family candidate for review because STMicroelectronics offers the LM358 dual general-purpose amplifier family in MiniSO-8 configurations. A replacement should be approved only after comparing the exact ordering suffix, temperature grade, electrical limits, pin assignments, exposed-pad requirements, and recommended PCB land pattern. Confirm the candidate’s standalone datasheet and quality documentation before using it as a production substitute.
What can replace LM358AWST?
LM358WST and LM358YDT are same-family MiniSO-8 candidates for evaluation against LM358AWST. Both must be checked for exact pinout, channel configuration, supply range, electrical characteristics, temperature grade, and package geometry before substitution. An engineering change should document those comparisons and any differences in qualification, marking, traceable date codes, or lifecycle expectations rather than relying on the LM358 family name alone.
LM358AWST vs LM358WST - which is better for an industrial design?
LM358AWST is the preferred starting point when the exact ordered grade and automotive or extended-temperature qualification of the AWST suffix matters to the application. LM358WST may be appropriate when its standard grade covers the required temperature and qualification conditions. The decisive comparison is not family similarity but the ordering-suffix electrical limits, operating-temperature range, qualification status, and approved package footprint.
When should I choose LM358AWST over LM358YDT?
Choose LM358AWST when the AWST ordering code satisfies the required environmental grade, qualification level, traceability, and supply plan for the design. Choose LM358YDT when its documented temperature and qualification ratings match the application while offering a more appropriate lifecycle or sourcing position. Both approaches must use the MiniSO-8 pinout and land pattern, and the final choice should follow a complete manufacturer-datasheet comparison.
Is LM358AWST suitable for sensor signal conditioning?
LM358AWST is suitable for many sensor signal-conditioning applications because it provides two general-purpose amplifier channels in one compact MiniSO-8 package. Each channel can support a non-inverting or inverting gain stage, input buffering, or active filtering. Confirm the sensor signal range against the input common-mode limits and verify output swing at the actual supply voltage before selecting resistor values or input protection components.
What is the best cross-brand equivalent for LM358AWST?
The best cross-brand equivalent is the part that matches all electrical limits, the MiniSO-8 footprint, pin assignment, temperature grade, and qualification requirements of LM358AWST. Cross-reference directories identify several LM358-related candidates, but family-level listings alone do not establish drop-in compatibility. Compare each manufacturer’s official datasheet and recommended land pattern, then validate the chosen part in the intended amplifier configuration.

Données de référence d'ingénierie pour LM358AWST — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose LM358AWST for a new design when a compact dual general-purpose amplifier in MiniSO-8 is required and the AWST ordering grade matches the environmental and qualification needs. LM358WST is a practical same-family candidate when its documented limits and lifecycle position are preferable, but it should not replace the target without an engineering review. LM358YDT is another MiniSO-8 family candidate whose ordering-grade and temperature characteristics must be compared with LM358AWST. None of the listed alternatives should be treated as automatically equivalent without checking supply range, common-mode input range, output swing, offset, bias current, bandwidth, stability, noise, and temperature limits. For fixed PCBs, also confirm the land pattern, exposed-pad connection, pin numbering, and package drawing before purchasing. Cross-brand devices require a separate comparison because a published LM358 cross-reference entry alone does not establish MiniSO-8 pin compatibility.

Comparaison avec les alternatives

Paramètre Ce produit LM358WST LM358YDT
Brand STMicroelectronics STMicroelectronics STMicroelectronics
Package MiniSO-8 MiniSO-8 MiniSO-8
Amplifier Circuits 2 circuits 2 circuits 2 circuits
Total Pins 8 pins 8 pins 8 pins
Product Class General-purpose low-power operational amplifier General-purpose low-power operational amplifier General-purpose low-power operational amplifier

Principaux différenciateurs

  • Two general-purpose amplifier channels in one compact package (vs LM358WST)
  • Same MiniSO-8 footprint family with a clear ordering-suffix decision (vs LM358YDT)
  • Compact dual-channel implementation (vs LM324KNSR)

Notes de conception

Use the STMicroelectronics MiniSO-8 land pattern rather than a generic SOIC-8 footprint. Place the supply-bypass capacitor close to the device supply and ground pins, keep the exposed thermal pad electrically connected as specified, and route sensitive input nets away from switching inductors, power MOSFETs, and high-current return paths. Verify pin 1 orientation against the package marking and PCB assembly documentation before fabrication.

Do not assume that every LM358-family ordering code is electrically or thermally interchangeable. Check the exact suffix against the standalone datasheet for supply limits, input common-mode range, output swing, offset voltage, input bias current, temperature grade, and qualification status. When replacing LM358AWST, compare the candidate’s MiniSO-8 footprint and pin map as well as its electrical characteristics; the family name alone does not establish drop-in qualification.

For sensor or high-impedance input stages, keep the summing node and feedback components compact, minimize parasitic capacitance, and avoid routing inputs beside digital clocks or switching-regulator traces. Confirm that the selected noise gain provides adequate stability with the actual source impedance and load. Include output loading, startup, and supply-transient checks because the common-mode and swing limits determine whether the signal remains linear over the full operating range.

Although LM358AWST is identified as a low-power device, package temperature still depends on supply voltage, quiescent current, output load, ambient temperature, and PCB copper. The MiniSO thermal pad should be connected and laid out according to the manufacturer land pattern. Check worst-case dissipation across temperature and supply tolerance, and preserve copper area where possible so the package can dissipate heat without raising the amplifier’s junction temperature above its specified limit.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

Compliance status must be confirmed from the manufacturer product documentation and current material-declaration records for the exact ordering code.

Données vérifiées le : 2026-11-17 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

LM358AWST datasheet LM358AWST pinout LM358AWST datasheet pdf LM358AWST footprint LM358AWST equivalent LM358AWST replacement LM358AWST vs LM358WST LM358AWST price LM358AWST stock STMicroelectronics LM358AWST LM358AWST application circuit LM358AWST MiniSO-8 amplifier

Composants & termes associés

STMicroelectronics LM358AWST LM358WST LM358YDT LM358 dual operational amplifier general-purpose amplifier low-power amplifier analog signal conditioning active filter current-to-voltage converter voltage buffer instrumentation amplifier MiniSO-8 MSOP-8 surface-mount package QFN family semiconductor RoHS REACH AEC-Q100 input common-mode range output swing gain-bandwidth product slew rate
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ