LPC11A02UK - 50MHz ARM Cortex-M0 MCU | NXP | WLCSP-20
Référence : LPC11A02UK ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1 000 | $0 | $0,00 |
LPC11A02UK Présentation
A microcontroller is a programmable system-on-chip that integrates a processor core, memory, and peripherals into one component. The LPC11A02UK belongs to the LPC11Axx family of low-cost 32-bit MCUs and uses the Arm Cortex-M0 architecture, which provides a compact instruction set for responsive embedded control. Its 16 kB Flash supports firmware storage, while its 4 kB SRAM provides working memory for control routines and data buffers.
Key features include operation up to 50 MHz, a 1-bit ADC, a 10-bit DAC, an analog comparator, a temperature sensor, an internal voltage reference, and under-voltage lockout protection. The verified distributor information identifies the device as a WLCSP-20 packaged microcontroller with 18 I/O ports and a supply voltage range of 2.6 V to 3.6 V. These features allow the MCU to support sensing, actuator control, monitoring, and low-speed communication tasks within a compact embedded design.
The LPC11A02UK uses a 32-bit Arm Cortex-M0 processor and is positioned as a low-cost member of the LPC11Axx microcontroller family. The Cortex-M0 core is suitable for deterministic, compact embedded-control code where simplicity, low silicon cost, and compact packaging matter. The device combines digital control with configurable analog and mixed-signal peripherals, allowing one MCU to supervise sensors, drive outputs, and manage local system conditions.
Typical applications include battery-powered sensor nodes, compact industrial monitoring modules, consumer accessories, small motor-control subsystems, and embedded control boards. The 20-WLCSP package is especially useful where PCB area is constrained. Designers should confirm the exact ball map, exposed-pad requirements, supported peripherals, and pin multiplexing against the manufacturer datasheet before laying out a new PCB or replacing another device.
This page consolidates verified manufacturer and distributor information, package details, application guidance, and purchasing considerations. Pricing and availability can change by quantity and supplier, so procurement should be confirmed against current distributor listings. For replacements, pin compatibility and peripheral equivalence must be verified rather than inferred from the family name alone.
The LPC11A02UK is an active NXP product suitable for engineers seeking a compact Arm Cortex-M0 controller with integrated sensing and monitoring functions. Its principal trade-offs are small package availability, limited memory compared with larger MCUs, and the need for careful board-level validation around the 20-WLCSP footprint.
Alternatives de remplacement direct pour LPC11A02UK — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
LPC11A02UK,118
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
LPC11A02UK
✅ Remplacement direct✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →LPC11A02UK,118
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
LPC11A02UK,118
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
LPC11A02UK
✅ Remplacement direct✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →LPC11A02UK Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit ARM Cortex-M0 microcontroller |
| CPU Frequency | Up to 50 MHz |
| Flash Memory | 16 kB |
| SRAM | 4 kB |
| Tension d'alimentation | 2.6 V to 3.6 V |
| I/O Ports | 18 |
| ADC | 1-bit ADC |
| DAC | 10-bit DAC |
| Analog Comparator | Included |
| Temperature Sensor | Included |
| Internal Voltage Reference | Included |
| Under-Voltage Lockout | UVLO protection included |
| Boîtier | 20-WLCSP |
| Package Dimensions | 2.50 x 2.50 mm, 0.60 mm height |
| Terminal Form | Ball |
| Processor Architecture | Arm Cortex-M0 |
| Statut du cycle de vie | Active |
Guide de configuration des broches du LPC11A02UK 2.50 x 2.50 mm, 0.60 mm height
Configuration des broches du LPC11A02UK (boîtier 2.50 x 2.50 mm, 0.60 mm height). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour LPC11A02UK.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
LPC11A02UK convient pour 6 applications: Battery-Powered Sensor Node, Industrial Condition Monitoring, Compact Consumer Accessory, Small Embedded Control Module, Battery Management Support, Portable Measurement Device.
Battery-Powered Sensor Node
The LPC11A02UK fits compact battery-powered sensor nodes because its 50 MHz Arm Cortex-M0 core provides responsive control while the 20-WLCSP package preserves PCB area. The verified feature set includes a temperature sensor, internal voltage reference, analog comparator, and UVLO protection, enabling local sensing, threshold comparison, and supply monitoring without adding a separate analog system. The 16 kB Flash can hold application firmware and 4 kB SRAM can support working state, buffers, and control variables. Designers should confirm low-power mode currents and wake-up behavior in the exact datasheet before estimating battery life, because those values are not included in the supplied data.
Recommandé
Industrial Condition Monitoring
LPC11A02UK is suitable for compact industrial condition-monitoring modules that combine sensor acquisition, threshold logic, and local diagnostics. Its 18 I/O ports provide flexibility for digital inputs, status indicators, and external control signals, while the integrated comparator and internal voltage reference can support local threshold detection. The 50 MHz Cortex-M0 core is suitable for coordinating sampling routines, filtering, fault flags, and communication tasks. Its 16 kB Flash and 4 kB SRAM may be sufficient for focused monitoring logic, but applications requiring extensive history, high-resolution conversion, or multiple communication protocols should assess memory and peripheral requirements before design freeze.
Recommandé
Compact Consumer Accessory
The LPC11A02UK can be used in compact consumer accessories where a small controller must manage buttons, indicators, simple sensing, and local power management. The 20-WLCSP package reduces board footprint, and the integrated analog resources allow the design to monitor temperature or compare a measured signal without relying only on external digital components. The 2.6 V to 3.6 V operating range is useful for low-voltage designs, although the exact regulator, battery source, and I/O levels must be checked together. Firmware developers should verify programming access, reset behavior, and package pin multiplexing in the official documentation before layout release.
Recommandé
Small Embedded Control Module
LPC11A02UK is a practical choice for small embedded control modules that need deterministic digital control alongside basic analog supervision. The 32-bit Cortex-M0 architecture supports efficient instruction execution, and the available 18 I/O ports can connect control outputs, status inputs, and external logic. The integrated comparator can assist with fast threshold decisions, while the temperature sensor and internal reference provide useful local monitoring functions. Because the device has only 16 kB Flash and 4 kB SRAM, the architecture should be kept focused and real-time requirements should be checked carefully. A larger MCU is preferable when the application needs extensive buffers, complex protocols, or high-resolution conversion.
Recommandé
Battery Management Support
The LPC11A02UK can support a small battery-powered system by combining local voltage supervision, temperature sensing, and low-voltage detection in one controller. The internal voltage reference and UVLO protection are useful for monitoring operating conditions, while the comparator can provide a fast hardware-assisted threshold function. The MCU can generate state flags, control external circuitry, and coordinate a power policy through firmware. This application requires careful review of battery chemistry, regulator efficiency, load current, and low-power behavior; the supplied data confirms 2.6 V to 3.6 V operation and UVLO protection but does not provide battery-current or regulator-efficiency figures.
Recommandé
Portable Measurement Device
LPC11A02UK can serve portable measurement equipment that prioritizes compactness, local analog functions, and embedded control. Its analog comparator is useful for comparing a sensor signal with a threshold, the internal voltage reference can support repeatable measurement setup, and the temperature sensor can assist with system monitoring. The Cortex-M0 core can handle calibration state, measurement sequencing, and user-interface control. The package footprint helps reduce board size, but the 16 kB Flash and 4 kB SRAM require disciplined firmware sizing. If the product requires simultaneous high-resolution ADC sampling, large data capture, or advanced connectivity, select a higher-capacity MCU rather than forcing these functions into the LPC11A02UK.
Recommandé
Données de référence d'ingénierie pour LPC11A02UK — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | LPC11A02UK,118 | LPC11A02UK | LPC11A02UK,118 | LPC11A02UK |
|---|---|---|---|---|---|
| Package | 20-WLCSP, approximately 2.50 x 2.50 mm | 20-WLCSP, same device ordering code | 20-WLCSP, target MPN | 20-WLCSP, Mouser ordering code | 20-WLCSP, DigiKey product listing |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| CPU Core | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 |
| Maximum CPU Frequency | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| Flash Memory | 16 kB | 16 kB | 16 kB | 16 kB | 16 kB |
| SRAM | 4 kB | 4 kB | 4 kB | 4 kB | 4 kB |
| Supply Voltage | 2.6 V to 3.6 V | 2.6 V to 3.6 V | 2.6 V to 3.6 V | 2.6 V to 3.6 V | 2.6 V to 3.6 V |
| I/O Ports | 18 | 18 | 18 | 18 | 18 |
| Mixed-Signal Peripherals | 1-bit ADC, 10-bit DAC, comparator, temperature sensor, internal voltage reference, UVLO | Same LPC11A02UK feature set | Same LPC11A02UK feature set | Same LPC11A02UK feature set | Same LPC11A02UK feature set |
| Lifecycle Status | Active | Active product listing | Active | Active product listing | Active |
Principaux différenciateurs
- Integrated mixed-signal resources (vs LPC11A02UK,118)
- Compact package footprint (vs LPC11A02UK)
- Resource-constrained Cortex-M0 positioning (vs LPC11A02UK,118)
Notes de conception
Treat the 20-WLCSP footprint as a layout-controlled interface. Use the official NXP land pattern, ball numbering, pad dimensions, solder-mask definition, and reflow profile rather than estimating from the nominal 2.50 x 2.50 mm body size. Confirm exposed-pad or thermal-via requirements from the exact package drawing before fabrication. A small body size does not imply that routing, paste volume, or assembly tolerances can be relaxed.
Design the 2.6 V to 3.6 V supply rail with local decoupling close to the device and verify startup, UVLO behavior, and load-current requirements against the datasheet. The integrated internal voltage reference and temperature sensor can help monitoring functions, but they do not replace a correctly sized regulator or input protection network. Check every external sensor and I/O signal for voltage-level compatibility before connecting it to the 20-WLCSP device.
Do not select LPC11A02UK solely because it is a 50 MHz Cortex-M0 device. Firmware must fit within 16 kB Flash and data usage must remain within 4 kB SRAM, while the 1-bit ADC and 10-bit DAC impose specific measurement and output requirements. Also avoid assuming that a similarly named LPC11Axx or another Cortex-M0 MCU is pin-compatible. Confirm the exact ball map, peripheral availability, programming interface, and package suffix before substitution.
Informations de conformité
The supplied manufacturer and distributor snippets do not provide compliance declarations for RoHS, REACH, lead-free status, halogen-free status, conflict minerals, or automotive qualification. These fields remain unknown rather than inferred.
