LPC11U68JBD100E - 50MHz Cortex-M0+ 256KB MCU | NXP
Référence : LPC11U68JBD100E ✓ ActifLPC11U68JBD100E Présentation
A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, volatile data memory, and peripherals into one device. The LPC11U68 belongs to the LPC11Uxx family of scalable, entry-level ARM Cortex-M0+/M0 devices. This MCU family targets cost-sensitive designs that need more processing capability and memory than conventional 8-bit or 16-bit controllers without adopting a higher-cost microcontroller architecture.
Key features of the LPC11U68JBD100E include a 50 MHz ARM Cortex-M0+ core, 32-bit processing, 256 KB flash, and 36 KB SRAM. Its 100-pin LQFP package exposes substantially more I/O than small-outline packages, making it useful for systems combining several digital interfaces, analog inputs, communications, or external storage. The MCU is based on the ARM Cortex-M0+ architecture, which emphasizes a simple instruction set and compact code size for embedded control applications.
The LPC11Uxx family is designed for low-cost 8-bit and 16-bit microcontroller replacement, smart sensing, metering, communications, and general embedded control. Its operating frequency of up to 50 MHz supports responsive control loops and efficient event-driven firmware. The combination of dedicated program storage, SRAM, and a high-pin-count package allows a single controller to coordinate sensors, communications peripherals, and system I/O without relying on a separate external processor.
Typical uses include electronic meters, building-control endpoints, industrial sensing modules, low-power monitoring equipment, connected accessories, and embedded control boards. Engineers can evaluate the device with Arm Keil tooling through the LPC11U68 CMSIS device family package, while NXP's LPCXpresso environment provides a path for development and debugging.
The principal design consideration is that the 100-pin LQFP requires a substantially larger PCB footprint than 32-pin or 48-pin MCUs. Use the package drawing and pin table from the manufacturer documentation when assigning tracks, and confirm peripheral multiplexing before finalizing the board layout.
This product page combines the manufacturer identification, key memory and processor specifications, package information, practical application guidance, and a qualified comparison of parts considered for replacement. It is intended to help engineers make an initial suitability decision while preserving the need to validate electrical, timing, software, and lifecycle requirements against current manufacturer documentation.
Alternatives de remplacement direct pour LPC11U68JBD100E — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec LPC11U68JBD100E (même facteur de forme et même empreinte) — différant par Architecture, Maximum CPU Frequency, Package.
LPC11E68JBD100E
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
LPC1518JBD100E
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
LPC1519JBD100E
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
LPC1549JBD100E
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
LPC11U68JBD100E Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Processor Core | ARM Cortex-M0+ |
| Maximum CPU Frequency | 50 MHz |
| CPU Word Size | 32 bit |
| Flash Memory | 256 KB |
| SRAM | 36 KB |
| Operating Voltage | 3.3 V |
| Boîtier | 100-pin LQFP |
| Package Body Size | 14 mm × 14 mm |
| Type de montage | Surface mount |
| Architecture | ARM Cortex-M0+/M0 scalable entry-level MCU family |
| Application Target | Low-cost 8-bit and 16-bit embedded-control replacements |
| Number of I/O Pins | 100 pins |
| Programming and Debug Ecosystem | Arm Keil LPC11U00 CMSIS device family pack |
| Supplier Packaging | Tray |
Guide de configuration des broches du LPC11U68JBD100E 14 mm × 14 mm
Configuration des broches du LPC11U68JBD100E (boîtier 14 mm × 14 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour LPC11U68JBD100E.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
LPC11U68JBD100E convient pour 6 applications: Smart Energy Metering, Industrial Sensor Gateway, Building Control Endpoint, Connected Monitoring Device, Portable Measurement Instrument, Embedded Control and HMI Module.
Smart Energy Metering
The LPC11U68JBD100E fits metering endpoints that must execute measurement, calibration, storage, and communications functions without an external processor. Its 50 MHz ARM Cortex-M0+ core provides responsive handling of time-critical acquisition and control tasks, while 256 KB flash provides room for metering algorithms and communications firmware. The 36 KB SRAM supports working buffers and protocol state without immediately forcing external memory. The 100-pin LQFP also exposes more interface options than compact controllers, making it practical for connecting sensing channels, status indicators, and serial communications. Engineers should select peripheral functions and pins from the complete LPC11U68 pin table before laying out the meter board.
Recommandé
Industrial Sensor Gateway
The LPC11U68JBD100E is appropriate for compact industrial sensor nodes that acquire local data, apply filtering, and forward results through a serial link. Its Cortex-M0+ core operates up to 50 MHz, allowing useful local processing while maintaining a straightforward embedded instruction set and compact firmware footprint. With 256 KB flash and 36 KB SRAM, the device can hold protocol stacks and maintain data buffers. The 100-pin LQFP provides ample pin access for sensors, status controls, and communications isolation. Power design should use the manufacturer's recommended decoupling and ensure that unused pins are terminated according to the device documentation.
Recommandé
Building Control Endpoint
The LPC11U68JBD100E can coordinate building-control functions such as environmental monitoring, actuator commands, local overrides, and status reporting. Its 50 MHz core supports responsive event handling without the overhead of a higher-performance embedded processor, while 256 KB flash accommodates application logic and update-oriented firmware. The 100-pin package allows multiple digital interfaces and analog-capable pins to be connected on one controller board. For reliable operation across a building control network, engineers should define startup behavior, communication error recovery, and watchdog usage in firmware, then verify those functions against the selected peripheral configuration.
Recommandé
Connected Monitoring Device
The LPC11U68JBD100E suits connected monitoring products that combine sensing, local filtering, configuration, and a low-rate communications link. Its 256 KB flash and 36 KB SRAM are sufficient for embedded firmware, data structures, and short transaction buffers without requiring a separate memory device in many designs. The ARM Cortex-M0+ core supports efficient event-driven processing, and the 100-pin LQFP exposes enough connections for a sensor interface, communications peripheral, and user controls. Firmware designers should keep the MCU in an appropriate low-power mode between events and validate wake timing before specifying battery life.
Recommandé
Portable Measurement Instrument
The LPC11U68JBD100E supports portable instruments that combine measurement acquisition, control, display updates, and data transfer. The 50 MHz Cortex-M0+ core can service time-based control and signal-processing tasks while keeping code compact for an entry-level embedded platform. Its 36 KB SRAM provides working memory for acquisition and display buffers, while 256 KB flash stores application firmware. The 100-pin LQFP simplifies connection of sensors, switches, display interfaces, and communications ports on a relatively compact controller. Because this is a high-pin-count surface-mount package, component placement and routing should follow the manufacturer land pattern and thermal recommendations.
Recommandé
Embedded Control and HMI Module
The LPC11U68JBD100E is well suited to embedded control modules that must translate external commands into actuator, indicator, and communications activity. The Cortex-M0+ instruction set and 50 MHz operating capability provide enough performance for event prioritization and compact control algorithms without requiring a complex processor subsystem. Internal resources include 256 KB flash for application code and 36 KB SRAM for control state and communication buffers. The 100-pin package permits a generous peripheral allocation for user interfaces and external interfaces. System designers should check alternate-function conflicts carefully because several peripheral signals can be assigned to multiple package pins.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour LPC11U68JBD100E — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | LPC11E68JBD100E | LPC1518JBD100E | LPC1519JBD100E | LPC1549JBD100E |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 100-LQFP (14x14) | 100-LQFP | 100-LQFP | 100-LQFP | 100-LQFP |
| Product Family | LPC11Uxx | LPC11Exx | LPC150x | LPC150x | LPC150x |
Principaux différenciateurs
- Closest identified alternative retains the complete headline memory and processor configuration (vs LPC11E68JBD100E)
- Large LQFP package supports extensive peripheral connection requirements (vs LPC1518JBD100E)
- Entry-level Cortex-M0+ positioning emphasizes compact code and predictable embedded control (vs LPC1549JBD100E)
- Established LPC11U68 family identity simplifies comparison with related designs (vs LPC1519JBD100E)
Notes de conception
Treat the LPC11U68JBD100E as a high-pin-count LQFP design rather than a compact MCU layout. Follow the NXP package drawing for land pattern, pin-one orientation, courtyard, and exposed or routed pad details. Place decoupling capacitors close to the corresponding supply pins, route sensitive analog inputs away from fast digital switching paths, and reserve programming and debug access before routing the remaining signals.
Design the 3.3 V supply from the manufacturer's recommended operating limits rather than from the nominal voltage alone. Include local bulk and high-frequency decoupling, control startup current, and verify brownout behavior for systems that must preserve state or communicate a power-failure event. The E suffix should be checked against the required temperature range before the PCB release is frozen.
Do not assume that a device with the same package and memory capacity is a functionally identical replacement. The LPC11E68JBD100E is a close candidate, but peripheral selection, alternate-function routing, register differences, and startup code can still affect compatibility. Review the complete pin table, memory map, peripheral inventory, and device-support package before replacing LPC11U68JBD100E in an existing design.
Use the Arm Keil LPC11U00 CMSIS device family package to confirm the target device identity during development. Assign every physical pin through the exact LPC11U68 configuration rather than through a generic Cortex-M template. This prevents silent routing of peripherals to the wrong alternate-function pins and makes the design easier to compare with the LPC11E-series alternatives during a replacement review.
Informations de conformité
Material-compliance declarations are not stated in the cited product information. Request current manufacturer or supplier documentation for the exact LPC11U68JBD100E ordering code.