LPC11U68JBD100E - 50MHz Cortex-M0+ 256KB MCU | NXP
MPN: LPC11U68JBD100E ✓ פעילLPC11U68JBD100E סקירה
A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, volatile data memory, and peripherals into one device. The LPC11U68 belongs to the LPC11Uxx family of scalable, entry-level ARM Cortex-M0+/M0 devices. This MCU family targets cost-sensitive designs that need more processing capability and memory than conventional 8-bit or 16-bit controllers without adopting a higher-cost microcontroller architecture.
Key features of the LPC11U68JBD100E include a 50 MHz ARM Cortex-M0+ core, 32-bit processing, 256 KB flash, and 36 KB SRAM. Its 100-pin LQFP package exposes substantially more I/O than small-outline packages, making it useful for systems combining several digital interfaces, analog inputs, communications, or external storage. The MCU is based on the ARM Cortex-M0+ architecture, which emphasizes a simple instruction set and compact code size for embedded control applications.
The LPC11Uxx family is designed for low-cost 8-bit and 16-bit microcontroller replacement, smart sensing, metering, communications, and general embedded control. Its operating frequency of up to 50 MHz supports responsive control loops and efficient event-driven firmware. The combination of dedicated program storage, SRAM, and a high-pin-count package allows a single controller to coordinate sensors, communications peripherals, and system I/O without relying on a separate external processor.
Typical uses include electronic meters, building-control endpoints, industrial sensing modules, low-power monitoring equipment, connected accessories, and embedded control boards. Engineers can evaluate the device with Arm Keil tooling through the LPC11U68 CMSIS device family package, while NXP's LPCXpresso environment provides a path for development and debugging.
The principal design consideration is that the 100-pin LQFP requires a substantially larger PCB footprint than 32-pin or 48-pin MCUs. Use the package drawing and pin table from the manufacturer documentation when assigning tracks, and confirm peripheral multiplexing before finalizing the board layout.
This product page combines the manufacturer identification, key memory and processor specifications, package information, practical application guidance, and a qualified comparison of parts considered for replacement. It is intended to help engineers make an initial suitability decision while preserving the need to validate electrical, timing, software, and lifecycle requirements against current manufacturer documentation.
חלופות תחליף ישיר עבור LPC11U68JBD100E — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם LPC11U68JBD100E (אותו גורם צורה וטביעת רגל) — שונים ב Architecture, Maximum CPU Frequency, Package.
LPC11E68JBD100E
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
LPC1518JBD100E
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
LPC1519JBD100E
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
LPC1549JBD100E
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
LPC11U68JBD100E דירוגים מרביים ומאפיינים חשמליים
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Processor Core | ARM Cortex-M0+ |
| Maximum CPU Frequency | 50 MHz |
| CPU Word Size | 32 bit |
| Flash Memory | 256 KB |
| SRAM | 36 KB |
| Operating Voltage | 3.3 V |
| מארז | 100-pin LQFP |
| Package Body Size | 14 mm × 14 mm |
| סוג הרכבה | Surface mount |
| Architecture | ARM Cortex-M0+/M0 scalable entry-level MCU family |
| Application Target | Low-cost 8-bit and 16-bit embedded-control replacements |
| Number of I/O Pins | 100 pins |
| Programming and Debug Ecosystem | Arm Keil LPC11U00 CMSIS device family pack |
| Supplier Packaging | Tray |
מדריך תצורת פינים של LPC11U68JBD100E 14 mm × 14 mm
תצורת פינים עבור LPC11U68JBD100E (מארזת 14 mm × 14 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור LPC11U68JBD100E.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
LPC11U68JBD100E מתאים עבור 6 יישוםs: Smart Energy Metering, Industrial Sensor Gateway, Building Control Endpoint, Connected Monitoring Device, Portable Measurement Instrument, Embedded Control and HMI Module.
Smart Energy Metering
The LPC11U68JBD100E fits metering endpoints that must execute measurement, calibration, storage, and communications functions without an external processor. Its 50 MHz ARM Cortex-M0+ core provides responsive handling of time-critical acquisition and control tasks, while 256 KB flash provides room for metering algorithms and communications firmware. The 36 KB SRAM supports working buffers and protocol state without immediately forcing external memory. The 100-pin LQFP also exposes more interface options than compact controllers, making it practical for connecting sensing channels, status indicators, and serial communications. Engineers should select peripheral functions and pins from the complete LPC11U68 pin table before laying out the meter board.
מומלץ
Industrial Sensor Gateway
The LPC11U68JBD100E is appropriate for compact industrial sensor nodes that acquire local data, apply filtering, and forward results through a serial link. Its Cortex-M0+ core operates up to 50 MHz, allowing useful local processing while maintaining a straightforward embedded instruction set and compact firmware footprint. With 256 KB flash and 36 KB SRAM, the device can hold protocol stacks and maintain data buffers. The 100-pin LQFP provides ample pin access for sensors, status controls, and communications isolation. Power design should use the manufacturer's recommended decoupling and ensure that unused pins are terminated according to the device documentation.
מומלץ
Building Control Endpoint
The LPC11U68JBD100E can coordinate building-control functions such as environmental monitoring, actuator commands, local overrides, and status reporting. Its 50 MHz core supports responsive event handling without the overhead of a higher-performance embedded processor, while 256 KB flash accommodates application logic and update-oriented firmware. The 100-pin package allows multiple digital interfaces and analog-capable pins to be connected on one controller board. For reliable operation across a building control network, engineers should define startup behavior, communication error recovery, and watchdog usage in firmware, then verify those functions against the selected peripheral configuration.
מומלץ
Connected Monitoring Device
The LPC11U68JBD100E suits connected monitoring products that combine sensing, local filtering, configuration, and a low-rate communications link. Its 256 KB flash and 36 KB SRAM are sufficient for embedded firmware, data structures, and short transaction buffers without requiring a separate memory device in many designs. The ARM Cortex-M0+ core supports efficient event-driven processing, and the 100-pin LQFP exposes enough connections for a sensor interface, communications peripheral, and user controls. Firmware designers should keep the MCU in an appropriate low-power mode between events and validate wake timing before specifying battery life.
מומלץ
Portable Measurement Instrument
The LPC11U68JBD100E supports portable instruments that combine measurement acquisition, control, display updates, and data transfer. The 50 MHz Cortex-M0+ core can service time-based control and signal-processing tasks while keeping code compact for an entry-level embedded platform. Its 36 KB SRAM provides working memory for acquisition and display buffers, while 256 KB flash stores application firmware. The 100-pin LQFP simplifies connection of sensors, switches, display interfaces, and communications ports on a relatively compact controller. Because this is a high-pin-count surface-mount package, component placement and routing should follow the manufacturer land pattern and thermal recommendations.
מומלץ
Embedded Control and HMI Module
The LPC11U68JBD100E is well suited to embedded control modules that must translate external commands into actuator, indicator, and communications activity. The Cortex-M0+ instruction set and 50 MHz operating capability provide enough performance for event prioritization and compact control algorithms without requiring a complex processor subsystem. Internal resources include 256 KB flash for application code and 36 KB SRAM for control state and communication buffers. The 100-pin package permits a generous peripheral allocation for user interfaces and external interfaces. System designers should check alternate-function conflicts carefully because several peripheral signals can be assigned to multiple package pins.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור LPC11U68JBD100E — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | LPC11E68JBD100E | LPC1518JBD100E | LPC1519JBD100E | LPC1549JBD100E |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 100-LQFP (14x14) | 100-LQFP | 100-LQFP | 100-LQFP | 100-LQFP |
| Product Family | LPC11Uxx | LPC11Exx | LPC150x | LPC150x | LPC150x |
מבדילים עיקריים
- Closest identified alternative retains the complete headline memory and processor configuration (לעומתLPC11E68JBD100E)
- Large LQFP package supports extensive peripheral connection requirements (לעומתLPC1518JBD100E)
- Entry-level Cortex-M0+ positioning emphasizes compact code and predictable embedded control (לעומתLPC1549JBD100E)
- Established LPC11U68 family identity simplifies comparison with related designs (לעומתLPC1519JBD100E)
הערות תכנון
Treat the LPC11U68JBD100E as a high-pin-count LQFP design rather than a compact MCU layout. Follow the NXP package drawing for land pattern, pin-one orientation, courtyard, and exposed or routed pad details. Place decoupling capacitors close to the corresponding supply pins, route sensitive analog inputs away from fast digital switching paths, and reserve programming and debug access before routing the remaining signals.
Design the 3.3 V supply from the manufacturer's recommended operating limits rather than from the nominal voltage alone. Include local bulk and high-frequency decoupling, control startup current, and verify brownout behavior for systems that must preserve state or communicate a power-failure event. The E suffix should be checked against the required temperature range before the PCB release is frozen.
Do not assume that a device with the same package and memory capacity is a functionally identical replacement. The LPC11E68JBD100E is a close candidate, but peripheral selection, alternate-function routing, register differences, and startup code can still affect compatibility. Review the complete pin table, memory map, peripheral inventory, and device-support package before replacing LPC11U68JBD100E in an existing design.
Use the Arm Keil LPC11U00 CMSIS device family package to confirm the target device identity during development. Assign every physical pin through the exact LPC11U68 configuration rather than through a generic Cortex-M template. This prevents silent routing of peripherals to the wrong alternate-function pins and makes the design easier to compare with the LPC11E-series alternatives during a replacement review.
מידע על תאימות
Material-compliance declarations are not stated in the cited product information. Request current manufacturer or supplier documentation for the exact LPC11U68JBD100E ordering code.