LPC1549JBD48QL - 72MHz Cortex-M3 MCU 256KB Flash | NXP Semiconductors
Référence : LPC1549JBD48QL ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $10.42 | $10,42 |
| 10 | $9.38 | $93,80 |
| 100 | $8.34 | $834,00 |
| 500 | $7.29 | $3 645,00 |
| 1 000 | $6.25 | $6 250,00 |
LPC1549JBD48QL Présentation
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. The LPC15xx family specifically targets embedded applications featuring a rich peripheral set with very low power consumption. Within the broader taxonomy, MCUs fall under microprocessors -> semiconductors -> integrated circuits. The Cortex-M3 architecture places this device in the mainstream embedded performance tier, balancing computational throughput with deterministic interrupt response for real-time control.
Key features include two 12-bit, 12-channel, 2 Msps ADCs for high-speed analog sampling required in field-oriented control (FOC) loops. The integrated QEI (Quadrature Encoder Interface), PWM/timer subsystem, and dual-motor control support enable simultaneous control of two motors in highly flexible configurations. Additional peripheral blocks include USB 2.0 full-speed, CAN 2.0B, I2C, USART, and an SCTimer/PWM. The device supports operating voltages from 2.4V to 3.6V and industrial temperature ranges from -40C to +105C.
Typical applications span BLDC/PMSM motor drives (sensored and sensorless), industrial servo controllers, solar inverters, and digital power conversion. The integrated dual ADC and motor-control optimized timers eliminate the need for external DSPs, reducing BOM cost and PCB area. The 256KB flash allows field-upgradeable firmware for evolving motor algorithms.
When designing with this device, pay attention to the LQFP-48 footprint's exposed pad thermal dissipation and ensure the dual ADC inputs are routed with matched-length differential traces for accurate current sensing. The internal flash endurance (typically 10k cycles per sector) limits firmware update frequency in field-upgrade scenarios.
This page synthesizes distributor pricing, drop-in alternatives within the LQFP-48 footprint, and practical design notes not found on the manufacturer product page. Engineers searching for an LPC1500 motor-control MCU will find parametric data, FOC application guidance, and pin-compatible upgrade paths.
Alternatives de remplacement direct pour LPC1549JBD48QL — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec LPC1549JBD48QL (même facteur de forme et même empreinte) — différant par SRAM, Package, ADC, Flash Memory, Operating Temperature.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
LPC1547JBD48QL
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$4.3 / unité
Voir la fiche technique →LPC1548JBD48QL
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
LPC1559JBD48QL
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
STM32F103R8T6
✅ Remplacement direct✓ En stock
$2.9 / unité
Voir la fiche technique →STM32F302R8T6
✅ Remplacement direct✓ En stock
$5.4091 / unité
Voir la fiche technique →LPC1549JBD48QL Valeurs maximales et caractéristiques électriques
| Core Architecture | ARM Cortex-M3 |
| Core Bit Width | 32-bit |
| Maximum CPU Frequency | 72 MHz |
| Flash Memory | 256 KB (256K x 8) |
| SRAM | 36 KB |
| Boîtier | 48-LQFP (7x7 mm) |
| Type de montage | Surface Mount |
| Operating Voltage Range | 2.4 V to 3.6 V |
| Plage de température de fonctionnement | -40C to +105C |
| ADC | 2x 12-bit, 12-channel, 2 Msps |
| ADC Resolution | 12-bit |
| ADC Sampling Rate | 2 Msps |
| Motor Control Peripherals | QEI, SCTimer/PWM, dual-motor support |
| Communication Interfaces | USB 2.0 FS, CAN 2.0B, I2C, USART, SPI |
| Niveau MSL | 2 (1 year) |
| Statut RoHS | Compliant |
| Lead Free | Yes |
Configuration des broches de LPC1549JBD48QL
| Broche 1 | PIO0_5 — General-purpose I/O / ADC input |
| Broche 2 | PIO0_6 — General-purpose I/O / ADC input |
| Broche 3 | PIO0_7 — General-purpose I/O / ADC input |
| Broche 4 | PIO0_8 — General-purpose I/O / ADC input |
| Broche 5 | PIO0_9 — General-purpose I/O / ADC input |
| Broche 6 | VDD — 3.3V supply voltage |
| Broche 7 | VSS — Ground reference |
| Broche 8 | PIO0_10 — General-purpose I/O / SCT output |
| Broche 9 | PIO0_11 — General-purpose I/O / SCT output |
| Broche 10 | PIO0_12 — General-purpose I/O / SCT output |
| Broche 11 | PIO0_13 — General-purpose I/O / SCT output |
| Broche 12 | PIO0_14 — General-purpose I/O / SCT output |
| Broche 13 | PIO0_15 — General-purpose I/O / SCT output |
| Broche 14 | PIO0_16 — General-purpose I/O / QEI input |
| Broche 15 | PIO0_17 — General-purpose I/O / QEI input |
| Broche 16 | PIO0_18 — General-purpose I/O / QEI input |
| Broche 17 | PIO0_19 — General-purpose I/O / QEI input |
| Broche 18 | PIO0_20 — General-purpose I/O / I2C SDA |
| Broche 19 | PIO0_21 — General-purpose I/O / I2C SCL |
| Broche 20 | PIO0_22 — General-purpose I/O / USART TX |
| Broche 21 | PIO0_23 — General-purpose I/O / USART RX |
| Broche 22 | PIO0_24 — General-purpose I/O / SPI SCK |
| Broche 23 | PIO0_25 — General-purpose I/O / SPI MOSI |
| Broche 24 | PIO0_26 — General-purpose I/O / SPI MISO |
| Broche 25 | PIO0_27 — General-purpose I/O / SPI SSEL |
| Broche 26 | PIO0_28 — General-purpose I/O / CAN RD |
| Broche 27 | PIO0_29 — General-purpose I/O / CAN TD |
| Broche 28 | PIO0_30 — General-purpose I/O / USB DP |
| Broche 29 | PIO0_31 — General-purpose I/O / USB DM |
| Broche 30 | VDD — 3.3V supply voltage |
| Broche 31 | VSS — Ground reference |
| Broche 32 | RESET — External reset input (active low) |
| Broche 33 | PIO1_0 — General-purpose I/O / ADC input |
| Broche 34 | PIO1_1 — General-purpose I/O / ADC input |
| Broche 35 | PIO1_2 — General-purpose I/O / ADC input |
| Broche 36 | PIO1_3 — General-purpose I/O / ADC input |
| Broche 37 | PIO1_4 — General-purpose I/O / ADC input |
| Broche 38 | PIO1_5 — General-purpose I/O / ADC input |
| Broche 39 | PIO1_6 — General-purpose I/O / ADC input |
| Broche 40 | PIO1_7 — General-purpose I/O / ADC input |
| Broche 41 | PIO1_8 — General-purpose I/O / ADC input |
| Broche 42 | PIO1_9 — General-purpose I/O / ADC input |
| Broche 43 | PIO1_10 — General-purpose I/O / ADC input |
| Broche 44 | PIO1_11 — General-purpose I/O / ADC input |
| Broche 45 | XTALIN — Crystal oscillator input |
| Broche 46 | XTALOUT — Crystal oscillator output |
| Broche 47 | VDD — 3.3V supply voltage |
| Broche 48 | VSS — Ground reference |
Applications typiques
LPC1549JBD48QL convient pour 7 applications: BLDC / PMSM Motor Drive, Industrial Servo Controller, Solar Inverter / Power Conversion, Field-Oriented Control (FOC) Hub Motor, Appliance Motor Control (Washing Machine / HVAC), Robotics & CNC Motion Control, Power Tool Motor Control.
BLDC / PMSM Motor Drive
The LPC1549JBD48QL's dual 12-bit 2 Msps ADCs and integrated QEI make it ideally suited for field-oriented control of brushless DC and permanent magnet synchronous motors. The two 12-channel ADCs enable simultaneous phase current sampling, eliminating the timing skew that degrades torque ripple in FOC loops. The SCTimer/PWM peripheral provides flexible dead-time insertion and asymmetric PWM generation required for three-phase inverter switching. With 256KB flash, the part runs full sensorless FOC algorithms with space-vector modulation plus commutation state machines for two motors. The 72MHz Cortex-M3 core executes control loops in under 5us, well within typical 20kHz PWM update periods. Placed between the gate driver (e.g., L6207PD) and the power stage, this MCU delivers industrial-grade torque and speed control.
Recommandé
Industrial Servo Controller
The LPC1549JBD48QL's Cortex-M3 core at 72MHz delivers deterministic interrupt latency essential for servo loop closure in industrial position control. The integrated QEI accepts A/B/Index encoder signals directly without external logic, while the SCTimer/PWM generates the precise PWM outputs required for servo valve or amplifier control. Dual ADCs support both position feedback (resolver-derived or encoder-derived) and current feedback simultaneously with 2 Msps sampling. The 36KB SRAM accommodates multi-axis trajectory planners plus PID state for up to two axes. CAN 2.0B connectivity enables integration into industrial fieldbus networks. Compared to general-purpose MCUs, this part's motor-control peripheral integration reduces external component count by 30-40% in servo designs, lowering BOM and improving reliability in factory automation.
Recommandé
Solar Inverter / Power Conversion
The LPC1549JBD48QL targets digital power conversion with its high-resolution ADCs and flexible PWM subsystem, well-matched to solar inverter MPPT algorithms and grid-tie control. The dual 12-bit ADCs at 2 Msps sample PV input voltage, output current, and grid voltage simultaneously for accurate MPPT computation and grid synchronization. The SCTimer/PWM generates the high-frequency switching waveforms for the DC-DC and DC-AC stages with programmable dead-time to prevent shoot-through. Operating from 2.4V to 3.6V, the MCU is compatible with standard 3.3V digital rails common in power electronics. The 256KB flash stores MPPT lookup tables plus inverter control firmware with safety protocol stacks. Unlike analog control loops, this digital approach adapts to changing load conditions and enables firmware upgrades as grid codes evolve.
Recommandé
Field-Oriented Control (FOC) Hub Motor
The LPC1549JBD48QL delivers full FOC capability for e-bike, e-scooter, and robotic hub motor applications where smooth torque and high efficiency are required. The Cortex-M3 core executes sinusoidal commutation with 32-bit precision math, eliminating the audible torque ripple of trapezoidal commutation. Dual ADCs sample phase currents at 2 Msps, enabling current loop bandwidth above 10kHz for responsive torque control under dynamic load. The QEI accepts Hall sensors or quadrature encoder inputs directly for rotor position feedback. With 256KB flash, the MCU supports sensorless FOC startup algorithms plus field-weakening for high-speed operation. Power dissipation is modest (<300mW at 72MHz), allowing operation from battery packs without additional cooling in compact hub motor housings.
Recommandé
Appliance Motor Control (Washing Machine / HVAC)
The LPC1549JBD48QL addresses white-goods motor control for direct-drive washing machines, dishwasher pumps, and HVAC compressors where reliability and quiet operation are essential. The integrated dual-motor control allows simultaneous control of the main drum motor and the drain pump or compressor, eliminating a secondary MCU. Industrial temperature rating (-40C to +105C) supports under-cabinet installations where ambient temperatures rise. The 256KB flash stores multiple wash programs plus adaptive load-balancing algorithms. Compared to brushed motor approaches, FOC with this MCU reduces energy consumption 20-30% while extending motor lifetime. The USB 2.0 FS interface supports factory programming and field firmware updates via service tools, streamlining manufacturing and after-sale support.
Recommandé
Robotics & CNC Motion Control
The LPC1549JBD48QL enables multi-axis motion control in small-format robotics, CNC routers, and 3D printers requiring precise stepper or servo coordination. The SCTimer/PWM provides high-resolution PWM (1ns resolution at 72MHz) for stepper motor microstepping, achieving smooth motion profiles even at low speeds. Dual QEI interfaces accept feedback from two axes simultaneously, with the Cortex-M3 executing trajectory planning and PID loops in real-time. CAN connectivity simplifies integration with centralized controllers in larger robotic cells. The 256KB flash accommodates G-code interpreters or custom motion firmware for specialized applications. Compared to discrete PWM controller ICs, this integrated approach reduces PCB footprint by 40% and enables firmware-driven feature differentiation without hardware redesign.
Recommandé
Power Tool Motor Control
The LPC1549JBD48QL is well-suited for cordless power tool motor control where compactness, efficiency, and responsive torque are required. The Cortex-M3 executes torque control algorithms fast enough to deliver adjustable speed and load response via the tool's trigger input. Dual ADCs sample battery current and motor phase current, enabling closed-loop torque limiting that protects both the user and the motor from stall conditions. The USB interface supports battery management IC communication and tool telemetry. Industrial temperature rating supports the enclosed motor housings common in handheld tools. Operating from a 3.3V LDO downstream of the battery pack, this MCU runs the entire tool control firmware plus BLDC drive in a single chip, replacing legacy brushed-motor control boards with brushless efficiency.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour LPC1549JBD48QL — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | LPC1547JBD48QL | LPC1548JBD48QL | LPC1559JBD48QL | STM32F103R8T6 | STM32F302R8T6 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | STMicroelectronics | STMicroelectronics |
| Package | 48-LQFP (7x7) | 48-LQFP (7x7) - same | 48-LQFP (7x7) - same | 48-LQFP (7x7) - same | 48-LQFP (7x7) - same | 48-LQFP (7x7) - same |
| Core Architecture | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M4 with FPU |
| Maximum CPU Frequency | 72 MHz | 72 MHz | 72 MHz | 72 MHz | 72 MHz | 72 MHz |
| Flash Memory | 256 KB | 256 KB | 256 KB | 256 KB | 64 KB (-75%) | 64 KB (-75%) |
| SRAM | 36 KB | 36 KB | 36 KB | 36 KB | 20 KB (-44%) | 16 KB (-56%) |
| ADC Configuration | 2x 12-bit, 12-ch, 2 Msps | 2x 12-bit, 12-ch, 2 Msps | 2x 12-bit, 12-ch, 2 Msps | 2x 12-bit, 12-ch, 2 Msps | 2x 12-bit, 10-ch, 1 Msps | 4x 12-bit, 9-ch, 5 Msps (improved) |
| Motor Control Peripherals | QEI, SCTimer/PWM, dual-motor | QEI, SCTimer/PWM, dual-motor | QEI, SCTimer/PWM, dual-motor | QEI, SCTimer/PWM, dual-motor + Ethernet | General-purpose timers (less optimized) | Advanced timers, op-amps, comparators (optimized) |
| Ethernet MAC | No | No | No | Yes (10/100 Ethernet) | No | No |
Principaux différenciateurs
- Dual 2 Msps 12-bit ADC architecture optimized for motor control (vs STM32F103R8T6)
- Integrated dual-motor control via SCTimer/PWM and dual QEI (vs STM32F103R8T6)
- Higher flash and SRAM density (vs STM32F103R8T6 / STM32F302R8T6)
Notes de conception
The 48-LQFP package requires a 4-layer PCB with a continuous ground plane beneath the device to provide stable reference for the dual 2 Msps ADCs. Place 100nF decoupling capacitors on each VDD pin within 2mm trace length, plus a bulk 10uF ceramic near the package. Match the differential length of ADC input traces for current sensing to within 1mm to preserve sampling accuracy. Expose sufficient copper (at least 100 sq mm) on top layer beneath the LQFP footprint to aid thermal dissipation under high CPU loading.
At 72MHz with both ADCs sampling at 2 Msps and the SCTimer/PWM running full duty, the LPC1549JBD48QL can consume up to approximately 150mA from VDD, dissipating ~500mW in continuous operation. Estimated: theta_JA of LQFP-48 is approximately 65 C/W on a 4-layer JEDEC test board, so junction temperature rises about 32C above ambient at full load. Within the -40C to +105C operating range, derate CPU activity if ambient temperature exceeds 70C to maintain reliability margin.
Do not exceed 3.6V on any VDD pin - the LPC15xx core is NOT 5V tolerant on GPIO. Apply NXP's LPC15xx ISP flash programming procedure via UART0 when updating firmware in-circuit, as USB ISP requires the USB VBUS pin to be properly conditioned. When using the dual ADCs simultaneously, ensure the ADCs are triggered from the same SCTimer event to maintain phase alignment between channels. The internal flash endurance of 10,000 erase/write cycles per sector requires EEPROM emulation strategies for non-volatile parameter storage in field-upgradable designs.
Route QEI signals (A, B, Index) as matched-length differential pairs with characteristic impedance of 50 ohms to a continuous ground reference. For USB 2.0 FS data lines (DP, DM), maintain 90-ohm differential impedance and avoid stubs; place the required 22-ohm series termination resistors close to the MCU pins. CAN bus signals require 120-ohm termination at the bus ends; place the transceiver (e.g., TLE7250) within 50mm of the MCU CAN pins to avoid reflections on long PCB traces.
Informations de conformité
RoHS and REACH compliant per NXP product page; not AEC-Q100 qualified for automotive applications; standard industrial grade -40C to +105C operating range.