LPC43S30FET100E - 204MHz Cortex-M4/M0 MCU | NXP
Référence : LPC43S30FET100E ✗ Fin de vieLPC43S30FET100E Présentation
A dual-core microcontroller is an embedded processing device that executes application code on a primary Arm Cortex-M4 core while using an Arm Cortex-M0 core for dedicated control or peripheral tasks. This heterogeneous architecture belongs to the microcontroller hierarchy: embedded controller, 32-bit MCU, Arm Cortex-M processor, and system-on-chip. It can improve real-time workload partitioning compared with a single-core design without requiring a separate controller for every peripheral function.
The LPC43S30FET100E combines a 204 MHz Cortex-M4 core with a Cortex-M0 coprocessor in one package. Up to 264 kB of SRAM supports protocol buffers, display data, and real-time control state. Integrated Ethernet supports connected equipment, while the dual high-speed USB controllers can simplify USB host or device connectivity. The AES engine adds hardware-assisted encryption for data protection and authenticated communication workflows.
The LPC43S30 series combines conventional microcontroller peripherals with programmable and serial peripherals. SCTimer and PWM resources provide flexible timing and motor-control functions, while SGPIO extends serial I/O capability beyond standard UART and SPI interfaces. These resources allow an embedded design to consolidate functions that would otherwise require additional programmable logic, interface controllers, or discrete peripherals.
Typical applications include industrial Ethernet controllers, connected test equipment, secure embedded gateways, USB-to-Ethernet bridges, high-speed data acquisition systems, and motor-control platforms. The Cortex-M4 core is suited to protocol processing and real-time control, while the Cortex-M0 coprocessor can service timing-sensitive or low-level tasks. Its 100-TFBGA footprint supports compact designs but requires careful escape routing and exposed-pad thermal management.
Board design should follow the manufacturer pin and land-pattern guidance for the 100-TFBGA package. Place decoupling capacitors close to the supply pins, preserve the required via and ball-pitch constraints, and use thermal vias beneath the exposed pad. Confirm the PCB stack-up, assembly process, and ground-plane continuity before releasing a production design.
This product page combines the LPC43S30FET100E core architecture and interface capabilities with practical design guidance, package information, sourcing answers, and a focused comparison of pin-compatible NXP options for engineers evaluating secure dual-core embedded platforms.
Alternatives de remplacement direct pour LPC43S30FET100E — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec LPC43S30FET100E (même facteur de forme et même empreinte) — différant par Package, Mounting Type, Ethernet Interface, Supply Voltage.
LPC43S30FET100
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
LPC43S50FET100
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
LPC43S20FET100
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
LPC4330FET100Y
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →LPC43S30FET100,551
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
LPC43S30FET100E Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit dual-core microcontroller |
| Primary CPU | Arm Cortex-M4, 32 bit |
| Coprocessor | Arm Cortex-M0, 32 bit |
| Maximum CPU Frequency | 204 MHz |
| Internal SRAM | 264 kB |
| Operating Voltage | 3.3 V |
| High-Speed USB Controllers | 2 controllers |
| Ethernet Interface | 1 integrated Ethernet interface |
| Security Engine | 1 AES engine |
| Configurable Timer and PWM Resources | SCTimer and PWM resources |
| Serial GPIO Interface | 1 SGPIO interface |
| Boîtier | 100-TFBGA, 9 x 9 mm |
| Type de montage | Surface-mount ball-grid array |
| Automotive Qualification | AEC-Q100 qualified |
| Statut RoHS | Compliant |
| Flash Memory | 0 kB internal flash; ROMless device |
Guide de configuration des broches du LPC43S30FET100E 100-tfbga, 9 x 9 mm
Configuration des broches du LPC43S30FET100E (boîtier 100-tfbga, 9 x 9 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour LPC43S30FET100E.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
LPC43S30FET100E convient pour 6 applications: Industrial Ethernet Gateway, USB-to-Ethernet Bridge, Secure Connected Controller, Data Acquisition System, Motor Control Platform, High-Speed USB Test Equipment.
Industrial Ethernet Gateway
The LPC43S30FET100E fits an industrial Ethernet gateway because it combines a 204 MHz Arm Cortex-M4 core, an Arm Cortex-M0 coprocessor, and integrated Ethernet in one 100-TFBGA device. The primary core can process protocols and application logic while the coprocessor handles peripheral servicing or timing-sensitive control tasks. Its 264 kB of SRAM provides room for packet buffers, connection state, and protocol data without requiring an external memory bus for moderate workloads. The integrated AES engine can support encrypted communications, while Ethernet reduces the number of external interface components. Firmware should still include watchdog recovery, physical-layer validation, and secure boot provisioning appropriate to deployed industrial equipment.
Recommandé
USB-to-Ethernet Bridge
A USB-to-Ethernet bridge benefits from the LPC43S30FET100E’s two high-speed USB controllers and integrated Ethernet interface. One USB controller can support a host or device link while the other provides implementation flexibility for peripheral expansion, subject to the shared pin and peripheral configuration. The 204 MHz Cortex-M4 core can execute USB and Ethernet protocol stacks concurrently with bridging tasks, and 264 kB of SRAM can hold packet descriptors and transmission queues. The dual-core architecture also allows the Cortex-M0 to service low-latency peripheral tasks. A production design should verify the USB host/device roles, PHY interface, clocking, Ethernet magnetics, and protocol-stack memory requirements.
Recommandé
Secure Connected Controller
The LPC43S30FET100E is appropriate for a secure connected controller that must combine network connectivity with local real-time processing. Its hardware AES engine accelerates encryption operations, while the 264 kB SRAM supports protocol state and application buffers. The 204 MHz Cortex-M4 core handles composite tasks, and the Cortex-M0 coprocessor can isolate control or peripheral activity. These resources are useful in access-control equipment, industrial sensors, and connected service modules. Security must be designed as a system rather than reduced to the presence of an AES block: use secure boot, protect keys, restrict debug access, update device identity data, and verify encryption modes and certificate handling against the manufacturer’s security documentation.
Recommandé
Data Acquisition System
The LPC43S30FET100E can serve as the control processor in a high-speed data acquisition system requiring flexible timing and external serial connectivity. Its 204 MHz Cortex-M4 core executes acquisition control and buffering, while the Arm Cortex-M0 coprocessor can service peripheral events without adding a separate controller. SCTimer/PWM resources support precise trigger, sampling, and actuator timing, and SGPIO extends serial I/O options for converters or specialized sensors. The 264 kB SRAM supports local buffering but does not replace external nonvolatile storage because the LPC43S30 is ROMless. The design should partition real-time tasks, include deterministic interrupt priorities, and use external flash for firmware and large capture records.
Recommandé
Motor Control Platform
The LPC43S30FET100E is suitable for compact motor-control platforms because its 204 MHz Arm Cortex-M4 core can execute control algorithms while the Cortex-M0 coprocessor handles timing-sensitive peripheral support. The configurable SCTimer/PWM resources can generate deterministic control and drive signals, and the extensive serial GPIO capability can expand communication with gate drivers, position sensors, and safety monitors. The 100-TFBGA package supports integration on a space-constrained controller board, although its 9 x 9 mm footprint requires careful fanout and thermal planning. Firmware partitioning, PWM synchronization, fault handling, and protection thresholds must be validated together, including the behavior of protections when either core enters a fault state.
Recommandé
High-Speed USB Test Equipment
The LPC43S30FET100E can support USB-connected test and measurement equipment that needs high-speed data movement and deterministic peripheral control. Its two high-speed USB controllers provide multiple USB interface options, while the 204 MHz Cortex-M4 core manages command processing and test sequencing. The Cortex-M0 coprocessor can execute background peripheral tasks, leaving the primary core available for throughput-sensitive data paths. The 264 kB SRAM supports command descriptors and transfer buffers, although instrument algorithms and large result sets may require external memory. Layout should isolate USB differential routes from sensitive analog and clock circuitry, while firmware should include endpoint bandwidth tests, suspend and resume handling, and fault-safe USB enumeration behavior.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour LPC43S30FET100E — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | LPC43S30FET100 | LPC43S50FET100 | LPC43S20FET100 | LPC4330FET100 | LPC43S30FET100,551 |
|---|---|---|---|---|---|---|
| Package | 100-TFBGA (9 x 9 mm) | 100-TFBGA (9 x 9 mm) | 100-TFBGA (9 x 9 mm) | 100-TFBGA (9 x 9 mm) | 100-TFBGA (9 x 9 mm) | 100-TFBGA (9 x 9 mm) |
| Brand | NXP | NXP | NXP | NXP | NXP | NXP |
| Primary CPU | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum CPU Frequency | 204 MHz | 204 MHz | 204 MHz | 204 MHz | 204 MHz | 204 MHz |
Principaux différenciateurs
- Combines a 204 MHz Cortex-M4 core with a dedicated Cortex-M0 coprocessor (vs LPC4330FET100)
- Provides 264 kB of internal SRAM for network and protocol workloads (vs LPC43S20FET100)
- Integrates an AES engine alongside Ethernet and two high-speed USB controllers (vs LPC43S20FET100)
- Provides a 100-TFBGA 9 x 9 mm package with substantial integration (vs LPC43S30FET100,551)
Notes de conception
Treat the 100-TFBGA as a high-density fanout design. Use the manufacturer land pattern and stack-up-specific library geometry, place each BGA ball on a single PCB pad, and maintain the specified ball-pitch and solder-mask clearance. Route external memory, Ethernet, USB, and clocks away from the ball field wherever practical. Validate escape traces with the selected PCB fabricator because a geometrically valid footprint can still fail assembly rules.
The LPC43S30 is ROMless and therefore requires external nonvolatile storage for boot code and application firmware. Confirm the external interface, voltage, pin multiplexing, and memory timing against the manufacturer configuration, and include bus-speed and signal-integrity validation in the schematic review. Provide local decoupling at every required supply ball and keep the power and ground plane continuous beneath the device rather than relying on sparse routing.
The 100-TFBGA footprint concentrates thermal and escape-routing demands in a small area. Follow the manufacturer’s exposed-pad, thermal-via, and copper recommendations, and verify the thermal design at the highest expected ambient temperature and core activity. Thermal performance depends on the actual PCB stack-up, copper area, via arrangement, enclosure, and workload, so a generic junction-temperature estimate is not a substitute for board-level validation.
High-speed USB, Ethernet, external memory, and clock signals require disciplined return paths and controlled impedance. Match trace lengths where the interface specification requires it, avoid routing over plane splits, and keep clock and high-speed data away from switching nodes. Apply manufacturer-recommended termination and series damping, then verify timing and eye behavior with the actual board stack-up and populated test fixture.
Do not treat a same-package alternative as automatically interchangeable. Before replacing the LPC43S30FET100E, verify boot configuration, clock sources, SRAM capacity, pin multiplexing, Ethernet and USB peripherals, AES behavior, watchdog handling, debug access, and software-driver support. For the dual-core design, document inter-core synchronization and failure behavior. A successful footprint fit does not establish binary or firmware compatibility.
Informations de conformité
RoHS compliance and AEC-Q100 qualification are identified for LPC43S30FET100; REACH, lead-free, halogen-free, and conflict-minerals status are unknown.