NXP

LPC43S30FET100E - 204MHz Cortex-M4/M0 MCU | NXP

MPN: LPC43S30FET100E ✗ जीवन की समाप्ति
3.3 V Vdss 100-TFBGA, 9 x 9 mm Package 204 MHz Speed 0 kB internal flash; ROMless device Memory
न्यूनतम ऑर्डर मात्रा: 1 |

LPC43S30FET100E अवलोकन

The NXP LPC43S30FET100E is a 32-bit dual-core microcontroller built around an Arm Cortex-M4 processor and an Arm Cortex-M0 coprocessor. It operates at up to 204 MHz, provides 264 kB of SRAM, and is housed in a 100-TFBGA package measuring 9 x 9 mm. The device also includes an AES security engine, two high-speed USB controllers, Ethernet connectivity, advanced configurable timers, and serial general-purpose I/O.

A dual-core microcontroller is an embedded processing device that executes application code on a primary Arm Cortex-M4 core while using an Arm Cortex-M0 core for dedicated control or peripheral tasks. This heterogeneous architecture belongs to the microcontroller hierarchy: embedded controller, 32-bit MCU, Arm Cortex-M processor, and system-on-chip. It can improve real-time workload partitioning compared with a single-core design without requiring a separate controller for every peripheral function.

The LPC43S30FET100E combines a 204 MHz Cortex-M4 core with a Cortex-M0 coprocessor in one package. Up to 264 kB of SRAM supports protocol buffers, display data, and real-time control state. Integrated Ethernet supports connected equipment, while the dual high-speed USB controllers can simplify USB host or device connectivity. The AES engine adds hardware-assisted encryption for data protection and authenticated communication workflows.

The LPC43S30 series combines conventional microcontroller peripherals with programmable and serial peripherals. SCTimer and PWM resources provide flexible timing and motor-control functions, while SGPIO extends serial I/O capability beyond standard UART and SPI interfaces. These resources allow an embedded design to consolidate functions that would otherwise require additional programmable logic, interface controllers, or discrete peripherals.

Typical applications include industrial Ethernet controllers, connected test equipment, secure embedded gateways, USB-to-Ethernet bridges, high-speed data acquisition systems, and motor-control platforms. The Cortex-M4 core is suited to protocol processing and real-time control, while the Cortex-M0 coprocessor can service timing-sensitive or low-level tasks. Its 100-TFBGA footprint supports compact designs but requires careful escape routing and exposed-pad thermal management.

Board design should follow the manufacturer pin and land-pattern guidance for the 100-TFBGA package. Place decoupling capacitors close to the supply pins, preserve the required via and ball-pitch constraints, and use thermal vias beneath the exposed pad. Confirm the PCB stack-up, assembly process, and ground-plane continuity before releasing a production design.

This product page combines the LPC43S30FET100E core architecture and interface capabilities with practical design guidance, package information, sourcing answers, and a focused comparison of pin-compatible NXP options for engineers evaluating secure dual-core embedded platforms.

के लिए ड्रॉप-इन विकल्प LPC43S30FET100E — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं LPC43S30FET100E (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Mounting Type, Ethernet Interface, Supply Voltage.

NXP Semiconductors
Package: TFBGA-100, 9 x 9 mm
Mounting Type: Surface mount
Supply Voltage: 2.2 V to 3.6 V
इसके साथ तुलना करें LPC43S30FET100E →
NXP Semiconductors
Package: 100-ball TFBGA, 9 x 9 mm
Mounting Type: Surface mount
Ethernet Interface: Integrated
इसके साथ तुलना करें LPC43S30FET100E →

LPC43S30FET100

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 100-TFBGA (9 x 9 mm)
Same 204 MHz Cortex-M4/M0 architecture and 264 kB SRAM; ordering-code differences require temperature and packing confirmation

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

LPC43S50FET100

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 100-TFBGA (9 x 9 mm)
Same 204 MHz Cortex-M4/M0 architecture and 100-TFBGA footprint; peripheral and memory-resource configuration differs

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

LPC43S20FET100

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 100-TFBGA (9 x 9 mm)
Same 204 MHz Cortex-M4/M0 architecture and 100-TFBGA footprint; SRAM and peripheral configuration differ from LPC43S30

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

LPC4330FET100Y

✅ ड्रॉप-इन
NXP Semiconductors
📦 100-TFBGA (9 x 9 mm)
32-bit dual-core microcontroller · Arm Cortex-M4 · Arm Cortex-M0 · 204 MHz · 32 bit · 264 kB · ROMless; external program storage required · 2

कीमत के लिए संपर्क करें

डेटाशीट देखें →

LPC43S30FET100,551

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 100-TFBGA (9 x 9 mm)
Same LPC43S30 core, memory, and 204 MHz operating point; ordering code indicates a different orderable configuration

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

LPC43S30FET100E Maximum Ratings और Electrical Characteristics

Product Type 32-bit dual-core microcontroller
Primary CPU Arm Cortex-M4, 32 bit
Coprocessor Arm Cortex-M0, 32 bit
Maximum CPU Frequency 204 MHz
Internal SRAM 264 kB
Operating Voltage 3.3 V
High-Speed USB Controllers 2 controllers
Ethernet Interface 1 integrated Ethernet interface
Security Engine 1 AES engine
Configurable Timer and PWM Resources SCTimer and PWM resources
Serial GPIO Interface 1 SGPIO interface
पैकेज 100-TFBGA, 9 x 9 mm
माउंटिंग प्रकार Surface-mount ball-grid array
Automotive Qualification AEC-Q100 qualified
RoHS स्थिति Compliant
Flash Memory 0 kB internal flash; ROMless device

LPC43S30FET100E 100-tfbga, 9 x 9 mm पिन कॉन्फ़िगरेशन गाइड

LPC43S30FET100E (100-tfbga, 9 x 9 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

LPC43S30FET100E के लिए 100-tfbga, 9 x 9 mm पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: LPC43S30FET100E.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

LPC43S30FET100E के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Ethernet Gateway, USB-to-Ethernet Bridge, Secure Connected Controller, Data Acquisition System, Motor Control Platform, High-Speed USB Test Equipment.

🏭

Industrial Ethernet Gateway

The LPC43S30FET100E fits an industrial Ethernet gateway because it combines a 204 MHz Arm Cortex-M4 core, an Arm Cortex-M0 coprocessor, and integrated Ethernet in one 100-TFBGA device. The primary core can process protocols and application logic while the coprocessor handles peripheral servicing or timing-sensitive control tasks. Its 264 kB of SRAM provides room for packet buffers, connection state, and protocol data without requiring an external memory bus for moderate workloads. The integrated AES engine can support encrypted communications, while Ethernet reduces the number of external interface components. Firmware should still include watchdog recovery, physical-layer validation, and secure boot provisioning appropriate to deployed industrial equipment.

🌐

USB-to-Ethernet Bridge

A USB-to-Ethernet bridge benefits from the LPC43S30FET100E’s two high-speed USB controllers and integrated Ethernet interface. One USB controller can support a host or device link while the other provides implementation flexibility for peripheral expansion, subject to the shared pin and peripheral configuration. The 204 MHz Cortex-M4 core can execute USB and Ethernet protocol stacks concurrently with bridging tasks, and 264 kB of SRAM can hold packet descriptors and transmission queues. The dual-core architecture also allows the Cortex-M0 to service low-latency peripheral tasks. A production design should verify the USB host/device roles, PHY interface, clocking, Ethernet magnetics, and protocol-stack memory requirements.

🔒

Secure Connected Controller

The LPC43S30FET100E is appropriate for a secure connected controller that must combine network connectivity with local real-time processing. Its hardware AES engine accelerates encryption operations, while the 264 kB SRAM supports protocol state and application buffers. The 204 MHz Cortex-M4 core handles composite tasks, and the Cortex-M0 coprocessor can isolate control or peripheral activity. These resources are useful in access-control equipment, industrial sensors, and connected service modules. Security must be designed as a system rather than reduced to the presence of an AES block: use secure boot, protect keys, restrict debug access, update device identity data, and verify encryption modes and certificate handling against the manufacturer’s security documentation.

📊

Data Acquisition System

The LPC43S30FET100E can serve as the control processor in a high-speed data acquisition system requiring flexible timing and external serial connectivity. Its 204 MHz Cortex-M4 core executes acquisition control and buffering, while the Arm Cortex-M0 coprocessor can service peripheral events without adding a separate controller. SCTimer/PWM resources support precise trigger, sampling, and actuator timing, and SGPIO extends serial I/O options for converters or specialized sensors. The 264 kB SRAM supports local buffering but does not replace external nonvolatile storage because the LPC43S30 is ROMless. The design should partition real-time tasks, include deterministic interrupt priorities, and use external flash for firmware and large capture records.

⚙️

Motor Control Platform

The LPC43S30FET100E is suitable for compact motor-control platforms because its 204 MHz Arm Cortex-M4 core can execute control algorithms while the Cortex-M0 coprocessor handles timing-sensitive peripheral support. The configurable SCTimer/PWM resources can generate deterministic control and drive signals, and the extensive serial GPIO capability can expand communication with gate drivers, position sensors, and safety monitors. The 100-TFBGA package supports integration on a space-constrained controller board, although its 9 x 9 mm footprint requires careful fanout and thermal planning. Firmware partitioning, PWM synchronization, fault handling, and protection thresholds must be validated together, including the behavior of protections when either core enters a fault state.

🖥️

High-Speed USB Test Equipment

The LPC43S30FET100E can support USB-connected test and measurement equipment that needs high-speed data movement and deterministic peripheral control. Its two high-speed USB controllers provide multiple USB interface options, while the 204 MHz Cortex-M4 core manages command processing and test sequencing. The Cortex-M0 coprocessor can execute background peripheral tasks, leaving the primary core available for throughput-sensitive data paths. The 264 kB SRAM supports command descriptors and transfer buffers, although instrument algorithms and large result sets may require external memory. Layout should isolate USB differential routes from sensitive analog and clock circuitry, while firmware should include endpoint bandwidth tests, suspend and resume handling, and fault-safe USB enumeration behavior.

अनुशंसित उत्पादों का सारांश

LPC43S30FET100 Same-family device for gateway firmware evaluation उपयोग में: Industrial Ethernet Gateway, USB-to-Ethernet Bridge, Secure Connected Controller, Motor Control Platform, High-Speed USB Test Equipment LPC43S30FET100,551 Alternate ordering configuration of the LPC43S30 gateway controller उपयोग में: Industrial Ethernet Gateway, Data Acquisition System LPC4330FET100 Pin-compatible NXP connectivity-controller alternative उपयोग में: USB-to-Ethernet Bridge, High-Speed USB Test Equipment LPC43S50FET100 Same-package family option with expanded resource configuration उपयोग में: Secure Connected Controller, Motor Control Platform LPC43S20FET100 Same-package family option for acquisition-control review उपयोग में: Data Acquisition System
What is the LPC43S30FET100E?
The LPC43S30FET100E is a 32-bit dual-core NXP microcontroller combining an Arm Cortex-M4 processor with an Arm Cortex-M0 coprocessor. According to NXP product documentation, it operates at up to 204 MHz, includes 264 kB of SRAM, and uses a 100-TFBGA package measuring 9 x 9 mm. It is a ROMless device intended for designs using external nonvolatile memory.
What are the key specifications of LPC43S30FET100E that engineers should know?
The LPC43S30FET100E combines a 204 MHz Arm Cortex-M4 core, an Arm Cortex-M0 coprocessor, and 264 kB of SRAM in a 100-TFBGA package. NXP also identifies an AES engine, two high-speed USB controllers, Ethernet, SCTimer/PWM resources, and SGPIO. These capabilities make it relevant to connected industrial control, secure communications, USB networking, and real-time embedded systems requiring peripheral partitioning.
Where can I download the LPC43S30FET100E datasheet PDF?
The official NXP LPC43S30FET100 product page provides the manufacturer documentation and datasheet access for the LPC43S30FET100 device family. Use the NXP page as the primary download source and confirm the selected device, package, temperature range, and ordering suffix before releasing a PCB or production BOM. The manufacturer’s package drawing and pin-description tables should govern PCB layout.
Where can I find the LPC43S30FET100E pinout and 100-TFBGA footprint?
The LPC43S30FET100E pinout and land pattern should be taken from the manufacturer’s LPC43S30 datasheet and package drawing rather than inferred from a distributor image. The device uses a 100-TFBGA package with a 9 x 9 mm body. Check ball assignments, power balls, ground balls, exposed-pad requirements, solder-mask and paste apertures, and via-in-pad allowances against the current NXP documentation.
LPC43S30FET100E vs LPC43S30FET100 - which should I select?
The LPC43S30FET100E and LPC43S30FET100 identify ordering configurations of the same LPC43S30 device family rather than unrelated architectures. Both use the 100-TFBGA package and support the 204 MHz Cortex-M4 plus Cortex-M0 configuration. The exact environmental, packing, and orderable-temperature distinctions should be confirmed from the manufacturer’s ordering information before substituting one MPN for the other.
When should I choose LPC43S30FET100E over LPC4330FET100?
Choose the LPC43S30FET100E when the design benefits from the secure LPC43S30 feature set, including its AES engine, dual-core architecture, and 264 kB of SRAM. LPC4330FET100 is reported as pin compatible with LPC43S30, but software, peripheral availability, security assumptions, and qualification requirements still require validation. Existing LPC4330 firmware and board constraints may favor the closer continuity of LPC4330.
Is LPC43S30FET100E the same as LPC43S20FET100?
The LPC43S30FET100E and LPC43S20FET100 belong to the same NXP LPC43S microcontroller family and use a compatible 100-TFBGA land pattern, but they are not identical devices. Their SRAM capacity, peripheral resources, security configuration, and firmware assumptions differ. Treat LPC43S20FET100 as a design-review alternative rather than assuming that the existing LPC43S30 firmware will operate without peripheral and memory-map verification.
What is the best drop-in replacement for LPC43S30FET100E?
The closest drop-in choices are same-package members of the LPC43S and LPC43x families, including LPC43S30FET100, LPC43S50FET100, LPC43S20FET100, and LPC4330FET100. A mechanical match does not eliminate firmware differences: confirm boot behavior, clock configuration, SRAM capacity, Ethernet and USB peripherals, security features, pin multiplexing, and software drivers before approving a replacement.
What can replace LPC43S30FET100E?
LPC43S30FET100 is the closest ordering-option match, while LPC43S50FET100, LPC43S20FET100, and LPC4330FET100 are pin-compatible NXP alternatives reported for the LPC43S30 family. Each replacement should be reviewed for SRAM capacity, cryptographic hardware, Ethernet and USB support, peripheral mapping, and firmware compatibility. A successful PCB fit alone is not sufficient for a functional replacement.
Where can I buy LPC43S30FET100E and check its price?
Use the Request a Quote form on this page to request LPC43S30FET100E pricing, stock, minimum order quantity, and current lead time. The quote workflow keeps the commercial response associated with the exact 100-TFBGA ordering suffix. Confirm lead time and production availability before committing the MCU to a new design or scheduled product launch.
How much does LPC43S30FET100E cost?
The current LPC43S30FET100E price should be obtained through the Request a Quote form on this page. The form can account for the exact ordering suffix, requested quantity, and current market position. Buyers should also request stock, minimum order quantity, packaging information, and lead time together so that price and availability remain aligned for the production build.
What is the lead time for LPC43S30FET100E?
Current LPC43S30FET100E lead time depends on market availability and the requested quantity. Use the Request a Quote form on this page to obtain a lead-time confirmation for the exact MPN and order quantity. For production planning, request the date each scheduled tranche can ship rather than relying on a generic inventory estimate.
Is LPC43S30FET100E in stock?
LPC43S30FET100E stock should be confirmed through the Request a Quote form on this page because availability can change with market conditions and order quantity. Include your required delivery date and acceptable alternate packing details in the request. For new production designs, use the returned stock and lead-time statement as part of the sourcing plan.
Does LPC43S30FET100E support Ethernet, USB, and hardware encryption?
Yes. NXP identifies the LPC43S30FET100 with integrated Ethernet, two high-speed USB controllers, and an AES security engine. These resources allow connected embedded systems to handle network traffic, USB links, and hardware-assisted encryption within the microcontroller. Peripheral sharing, protocol-stack requirements, and security-key handling still need to be evaluated during firmware and board design.
What is the best NXP equivalent for LPC43S30FET100E?
LPC43S30FET100 is the most direct NXP equivalent because it identifies the same LPC43S30 device in the manufacturer’s 100-TFBGA configuration. LPC43S50FET100, LPC43S20FET100, and LPC4330FET100 are additional same-brand options for design review. The best final choice depends on required SRAM, peripheral mix, security implementation, software support, qualification, and whether the existing firmware may be modified.

के लिए इंजीनियरिंग संदर्भ डेटा LPC43S30FET100E — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the LPC43S30FET100E for a connected embedded design that needs the combination of a 204 MHz Cortex-M4 core, a Cortex-M0 coprocessor, 264 kB of SRAM, Ethernet, two high-speed USB controllers, and an AES engine. Its 100-TFBGA package supports compact integration but requires disciplined PCB layout and external flash because the device is ROMless. LPC43S30FET100 is the closest ordering-level alternative when its temperature and packing configuration match the design. Consider LPC43S50FET100 when its expanded resources satisfy the design, and LPC43S20FET100 when lower resource requirements make it preferable after memory and peripheral checks. LPC4330FET100 is a reported pin-compatible option that can simplify board continuity, but security behavior and firmware support must be reviewed. For every alternative, validate boot flow, external memory, pin multiplexing, interrupts, security configuration, and driver support before release.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद LPC43S30FET100 LPC43S50FET100 LPC43S20FET100 LPC4330FET100 LPC43S30FET100,551
Package 100-TFBGA (9 x 9 mm) 100-TFBGA (9 x 9 mm) 100-TFBGA (9 x 9 mm) 100-TFBGA (9 x 9 mm) 100-TFBGA (9 x 9 mm) 100-TFBGA (9 x 9 mm)
Brand NXP NXP NXP NXP NXP NXP
Primary CPU Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4
Maximum CPU Frequency 204 MHz 204 MHz 204 MHz 204 MHz 204 MHz 204 MHz

मुख्य विशेषताएँ

  • Combines a 204 MHz Cortex-M4 core with a dedicated Cortex-M0 coprocessor (बनामLPC4330FET100)
  • Provides 264 kB of internal SRAM for network and protocol workloads (बनामLPC43S20FET100)
  • Integrates an AES engine alongside Ethernet and two high-speed USB controllers (बनामLPC43S20FET100)
  • Provides a 100-TFBGA 9 x 9 mm package with substantial integration (बनामLPC43S30FET100,551)

डिज़ाइन नोट्स

Treat the 100-TFBGA as a high-density fanout design. Use the manufacturer land pattern and stack-up-specific library geometry, place each BGA ball on a single PCB pad, and maintain the specified ball-pitch and solder-mask clearance. Route external memory, Ethernet, USB, and clocks away from the ball field wherever practical. Validate escape traces with the selected PCB fabricator because a geometrically valid footprint can still fail assembly rules.

The LPC43S30 is ROMless and therefore requires external nonvolatile storage for boot code and application firmware. Confirm the external interface, voltage, pin multiplexing, and memory timing against the manufacturer configuration, and include bus-speed and signal-integrity validation in the schematic review. Provide local decoupling at every required supply ball and keep the power and ground plane continuous beneath the device rather than relying on sparse routing.

The 100-TFBGA footprint concentrates thermal and escape-routing demands in a small area. Follow the manufacturer’s exposed-pad, thermal-via, and copper recommendations, and verify the thermal design at the highest expected ambient temperature and core activity. Thermal performance depends on the actual PCB stack-up, copper area, via arrangement, enclosure, and workload, so a generic junction-temperature estimate is not a substitute for board-level validation.

High-speed USB, Ethernet, external memory, and clock signals require disciplined return paths and controlled impedance. Match trace lengths where the interface specification requires it, avoid routing over plane splits, and keep clock and high-speed data away from switching nodes. Apply manufacturer-recommended termination and series damping, then verify timing and eye behavior with the actual board stack-up and populated test fixture.

Do not treat a same-package alternative as automatically interchangeable. Before replacing the LPC43S30FET100E, verify boot configuration, clock sources, SRAM capacity, pin multiplexing, Ethernet and USB peripherals, AES behavior, watchdog handling, debug access, and software-driver support. For the dual-core design, document inter-core synchronization and failure behavior. A successful footprint fit does not establish binary or firmware compatibility.

अनुपालन जानकारी

RoHS
Compliant
REACH
Unknown
AEC-Q100
Qualified
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

RoHS compliance and AEC-Q100 qualification are identified for LPC43S30FET100; REACH, lead-free, halogen-free, and conflict-minerals status are unknown.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

LPC43S30FET100E datasheet LPC43S30FET100E pinout LPC43S30FET100E datasheet pdf LPC43S30FET100E equivalent LPC43S30FET100E replacement LPC43S30FET100E cross reference LPC43S30FET100E price LPC43S30FET100E stock LPC43S30FET100E footprint LPC43S30FET100E schematic LPC43S30FET100 vs LPC4330FET100 NXP LPC43S30FET100E

संबंधित कंपोनेंट्स और शब्द

NXP LPC43S30FET100E LPC43S30FET100 LPC43S50FET100 LPC43S20FET100 LPC4330FET100 LPC43S30FET100,551 Arm Cortex-M4 Arm Cortex-M0 dual-core microcontroller embedded controller 32-bit microcontroller system-on-chip ROMless microcontroller external flash memory Ethernet high-speed USB AES engine SCTimer/PWM SGPIO 100-TFBGA BGA-100 ball-grid array surface-mount package AEC-Q100 RoHS
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें