Analog Devices

LT1014ISW - Quad Precision Op Amp, 16-SO | ADI

Référence : LT1014ISW ✓ Actif
50 µV maximum Vdss 0.15 nA Id 16-lead SOIC, 2.64 mm height Package
MOQ : 1 |

LT1014ISW Présentation

Analog Devices LT1014ISW is a quad precision operational amplifier containing four independent amplifiers in a 16-lead small-outline package. The device operates from ±15 V or a single 5 V supply, features a 50 µV offset voltage, 0.3 µV/°C offset drift, 117 dB common-mode rejection, and 120 dB power-supply rejection. Its low-voltage noise is 0.55 µV peak-to-peak from 0.1 Hz to 10 Hz, while input current noise is 0.07 pA/√Hz.

A precision operational amplifier is a voltage-feedback amplifier that uses high open-loop gain to reduce differential input error and produce an output proportional to the voltage between its differential inputs. The LT1014 belongs to the operational-amplifier, analog-signal-conditioning, semiconductor, and power-management application hierarchy. Four amplifiers in one package can support instrumentation channels, active filters, threshold circuits, and current-loop signal conditioning while reducing board area.

The LT1014’s principal features combine low offset, low drift, high common-mode rejection, and high power-supply rejection. The 50 µV offset specification is particularly useful because the quad configuration does not provide offset-null terminals. A guaranteed maximum supply current of 500 µA supports low-power instrumentation, while the 350 µA operating current cited by Analog Devices highlights its low-power biasing. Single-supply operation also permits designs that cannot provide a negative rail.

The LT1013/LT1014 family uses precision design techniques that minimize input offset voltage, input bias current, and supply-current demand. The 0.07 pA/√Hz current-noise figure makes the amplifier suitable for high-impedance transducers, and the 8 million open-loop gain supports accurate closed-loop amplification. Common-mode rejection of 117 dB and power-supply rejection of 120 dB help preserve signal integrity when supply noise or input common-mode voltage is present.

Typical applications include battery-powered precision instrumentation, strain-gauge signal conditioners, thermocouple amplifiers, instrumentation amplifiers, 4 mA-to-20 mA current-loop transmitters, multiple-limit threshold detectors, and active filters. The device is also appropriate for multiple gain blocks where four precision channels must fit into a compact analog front end.

When designing with the LT1014, check input and output voltage limits under the selected single- or dual-supply condition and provide stable bypass capacitance at the supply pins. High-impedance layouts should minimize leakage and guard sensitive input nodes, while precision measurements require resistor networks with suitable noise, tolerance, and thermal characteristics.

This page organizes the electrical characteristics, package information, drop-in alternatives, comparison data, and application guidance needed to evaluate the LT1014ISW as a precision quad operational amplifier. Use the manufacturer datasheet pin-description table when assigning PCB signals and verify the complete operating limits against the intended supply configuration.

Alternatives de remplacement direct pour LT1014ISW — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec LT1014ISW (même facteur de forme et même empreinte) — différant par Low-Voltage Noise, Number of Amplifiers, Package.

Analog Devices
Low-Voltage Noise: 0.55 uV peak-to-peak at 0.1 Hz to 10 Hz
Number of Amplifiers: 4 circuits
Package: 16-lead SO surface-mount package
Comparer avec LT1014ISW →

LT1014DSW

✅ Remplacement direct
Analog Devices
📦 16-SO
Quad precision operational amplifier · 4 circuits · 5 V to 44 V · 5 V · ±15 V · 500 uA · 0.55 uV peak-to-peak at 0.1 Hz to 10 Hz · 0.07 pA/sqrt(Hz)

Contactez-nous pour le prix

Voir la fiche technique →

LT1014DDW

✅ Remplacement direct
Texas Instruments
📦 16-SO
4 amplifiers · Precision operational amplifier · 1 MHz · 0.4 V/us · 5 V · 44 V · 0.8 mV maximum for LT1014D · 300 uV maximum

Contactez-nous pour le prix

Voir la fiche technique →

LT1014DIDWR

✅ Remplacement direct
📦 16-SO
Same LT1014 precision family and 16-lead SO package; industrial and military suffix distinctions require ordering-table verification

📋 Alternative de référence (hors catalogue)

TLE2144CDWR

✅ Remplacement direct
📦 16-SO
Pin-compatible quad precision op amp, but noise performance, slew rate, and frequency response differ from the LT1014

📋 Alternative de référence (hors catalogue)

LT1014ISW Valeurs maximales et caractéristiques électriques

Number of Amplifiers 4 amplifiers
Precision 50 µV offset voltage
Input Offset Voltage 50 µV maximum
Input Offset Drift 0.3 µV/°C
Input Offset Current 0.15 nA
Open-Loop Gain 8 million V/V
Common-Mode Rejection Ratio 117 dB
Power-Supply Rejection Ratio 120 dB
Low-Voltage Noise 0.55 µV peak-to-peak from 0.1 Hz to 10 Hz
Input Current Noise 0.07 pA/√Hz
Courant d'alimentation 500 µA maximum
Typical Supply Current 350 µA
Supported Supply Configuration ±15 V or single 5 V
Single-Supply Input Range Input range extends to ground
Température de fonctionnement -40 °C to +85 °C
Boîtier 16-lead SOIC, 2.64 mm height

Guide de configuration des broches du LT1014ISW 16-lead soic, 2.64 mm height

Configuration des broches du LT1014ISW (boîtier 16-lead soic, 2.64 mm height). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 16-lead soic, 2.64 mm height pour le LT1014ISW

Aucune donnée de brochage détaillée disponible pour LT1014ISW.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

LT1014ISW convient pour 6 applications: Battery-Powered Precision Instrumentation, Strain-Gauge Signal Conditioning, Thercocouple Amplification, 4 mA to 20 mA Current-Loop Transmitters, Instrumentation Amplifier Front Ends, Active Filters and Multiple Gain Blocks.

📱

Battery-Powered Precision Instrumentation

The LT1014ISW fits portable measurement systems because four precision amplifiers share a 16-lead SOIC package while the device supports a single 5 V supply and guarantees 500 µA maximum supply current. Its 50 µV offset voltage and 0.3 µV/°C drift help preserve accuracy as battery voltage and ambient temperature vary. Use the quad arrangement for sensor conditioning, gain stages, and active filtering while limiting board area. The principal design consideration is total system current, because sensor excitation, reference circuits, and output stages may consume more power than the amplifiers themselves.

🏭

Strain-Gauge Signal Conditioning

The LT1014ISW is appropriate for strain-gauge bridges where low offset and high common-mode rejection reduce errors in small differential signals. Its 50 µV maximum offset voltage and 117 dB CMRR provide a strong starting point for precision bridge amplifiers, while 120 dB PSRR helps isolate the measurement from supply variation. Use low-leakage board materials and guard techniques around high-impedance input nodes. The amplifier cannot remove bridge imbalance by itself, so resistor-network matching and calibration remain important parts of the measurement chain.

🏭

Thercocouple Amplification

The LT1014ISW can amplify thermocouple signals whose microvolt-level changes require low offset, low drift, and low current noise. The 50 µV maximum input offset and 0.3 µV/°C drift are meaningful relative to many temperature sensors, while 0.07 pA/√Hz current noise benefits high-impedance input arrangements. Use cold-junction compensation, input filtering, and open-circuit detection around the amplifier. Care should be taken to prevent thermocouple lead resistance and leakage from creating errors larger than the amplifier’s specified input error.

⚡

4 mA to 20 mA Current-Loop Transmitters

Analog Devices identifies current-loop transmitters as an LT1014 application, and the LT1014ISW supports this role with low offset, high CMRR, and single 5 V operation. The four amplifiers can support input conditioning, active filtering, gain stages, and output-loop drive functions. The device’s 500 µA maximum supply current is useful in transmitter designs, although the complete loop power budget also includes voltage references and output stages. The design should verify output swing, load compliance, loop resistance, and isolation requirements under the worst operating condition.

🖥️

Instrumentation Amplifier Front Ends

The LT1014ISW can implement the amplifier section of a precision instrumentation front end where common-mode rejection, offset control, and low power are important. Its 8 million open-loop gain, 117 dB CMRR, and 120 dB PSRR support accurate signal amplification, while four channels can reduce component count in multi-axis or multi-sensor systems. Matched feedback resistors should be used to preserve gain accuracy, and input bias-current compensation may be required for very high source impedances. Stable reference and bypass components complete the instrumentation chain.

🔧

Active Filters and Multiple Gain Blocks

The LT1014ISW fits active-filter and multiple-gain-block designs because it provides four precision amplifiers with low offset, high open-loop gain, and low supply current. The 8 million V/V open-loop gain supports accurate closed-loop gain, while low input offset reduces DC errors in filter passbands. Use resistor and capacitor selections appropriate to the required noise, stability, and tolerance goals. Decoupling should be placed close to the supply pins, and unused amplifier channels should be configured according to the manufacturer’s recommended stability practices.

Where to buy LT1014ISW online?
The LT1014ISW can be requested through XAIPART’s “Request a Quote” form on this page. The exact Analog Devices MPN is a quad precision operational amplifier in a 16-lead SOIC package, so confirm the requested package, quantity, and lead-time requirements before placing an order. The form is the appropriate route for current availability, lot traceability, and delivery scheduling.
What is the price of LT1014ISW?
Current LT1014ISW pricing is obtained through XAIPART’s “Request a Quote” form on this page. The requested part is the 16-lead SOIC version of Analog Devices’ quad precision op amp, and quotations should identify the exact LT1014ISW suffix rather than LT1014 variants with different temperature grades or tape-and-reel packaging. No price should be selected from a functionally similar dual or military-grade device.
What is the lead time for LT1014ISW?
The current lead time for LT1014ISW should be requested through XAIPART’s “Request a Quote” form on this page. Lead time can vary with order quantity, procurement lot, and inventory status, so it should be confirmed for the exact Analog Devices suffix rather than inferred from a generic LT1014 family listing. Include the required quantity, date code policy, and approved manufacturer status in the request.
Is LT1014ISW in stock?
Use XAIPART’s “Request a Quote” form on this page to check current stock and order timing for LT1014ISW. The part is a 4-amplifier, 16-lead SOIC precision op amp, so a quotation should specify that exact package and MPN. Treat availability separately from the lifecycle statement and verify any incoming inspection requirements before committing the device to a production BOM.
What are the key specifications of LT1014ISW that engineers should know?
The LT1014ISW combines four precision amplifiers in a 16-lead SOIC with 50 µV maximum input offset voltage, 0.3 µV/°C offset drift, 117 dB common-mode rejection, and 120 dB power-supply rejection. It supports ±15 V and single 5 V operation, offers 0.55 µV peak-to-peak noise from 0.1 Hz to 10 Hz, and guarantees 500 µA maximum supply current. Analog Devices identifies these characteristics in the LT1013/LT1014 datasheet.
What is the operating voltage of LT1014ISW?
The LT1014ISW is specified for operation from ±15 V supplies or a single 5 V supply. In single-supply operation, the input common-mode range extends to ground and the output can swing to within a few millivolts of ground, helping reduce crossover distortion. The Analog Devices LT1013/LT1014 datasheet is the controlling document for absolute maximum and electrical limits.
Where to download the LT1014ISW datasheet PDF?
The official LT1014ISW datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/LT1013-LT1014.pdf. The document covers the LT1014 quad and LT1013 dual precision op amps, including electrical characteristics, supply configurations, noise, common-mode rejection, power-supply rejection, applications, and package drawings. Use the pin-description table in that PDF for PCB assignments.
Where can I find the LT1014ISW pinout?
The LT1014ISW pin assignments are shown in the package and pin-description material within the Analog Devices LT1013/LT1014 datasheet. The component uses a 16-lead small-outline package and contains four complete differential amplifier channels plus supply connections. Before routing a board, verify the exact pin names and exposed package geometry against the manufacturer drawing rather than relying on a generic quad-op-amp diagram.
What can replace LT1014ISW?
The closest documented drop-in candidates include LT1014DSW, LT1014DDW, and LT1014DIDWR-family LT1014 variants in compatible 16-lead packages, plus the TLE2144CDWR identified as pin-compatible in cross-reference information. A replacement should be checked against offset voltage, drift, noise, supply range, bias current, and temperature grade. Use the comparison table to identify which parameters require explicit confirmation.
Is LT1014ISW the same as LT1014DSW?
The LT1014ISW and LT1014DSW are both LT1014-family quad precision op amps, but their suffix codes can designate different orderable temperature-grade or packaging configurations. Both use the 16-lead small-outline package identified for the target, but engineers should verify the electrical grade and mechanical suffix on the manufacturer ordering information. An identical package alone does not authorize substitution for every specification.
LT1014ISW vs TLE2144CDWR — which is better for precision instrumentation?
The LT1014ISW is the safer baseline for applications explicitly requiring LT1014 precision behavior because its published characteristics include 50 µV offset voltage, 0.3 µV/°C drift, 117 dB CMRR, and 120 dB PSRR. TLE2144CDWR is identified as a pin-compatible alternative, but its noise, slew rate, and frequency response may differ. Select it only after comparing those parameters with the instrumentation error budget.
When should I choose LT1014ISW over a generic quad op amp?
Choose LT1014ISW when low offset, low drift, high rejection, low supply current, and single-supply operation materially improve the measurement. Its 50 µV maximum offset and 0.3 µV/°C drift are particularly useful for thermocouple, strain-gauge, and active-filter stages. A generic quad amplifier may be adequate for less demanding signal paths, but it can increase calibration error or input-referred noise.
Is LT1014ISW suitable for 4 mA to 20 mA current-loop transmitters?
Yes, the LT1014ISW is suitable for precision 4 mA-to-20 mA current-loop transmitter signal paths because Analog Devices specifically lists current-loop transmitters among its applications. Its low offset and drift reduce measurement errors, while single 5 V operation supports portable instrumentation. The complete loop still requires suitable input protection, excitation current, filtering, and output-drive circuitry.
What is the low-noise performance of LT1014ISW?
The LT1014ISW has 0.55 µV peak-to-peak low-voltage noise over the 0.1 Hz to 10 Hz band and 0.07 pA/√Hz input current noise. These figures make it appropriate for precision transducers and instrumentation amplifiers where the amplifier’s own noise can limit usable resolution. The Analog Devices LT1013/LT1014 datasheet provides the authoritative noise characterization and test conditions.
Is LT1014ISW suitable for battery-powered instrumentation?
The LT1014ISW is suitable for battery-powered precision instrumentation because Analog Devices lists that application and specifies a guaranteed maximum supply current of 500 µA. Single 5 V operation also simplifies systems that cannot generate a negative rail. Actual battery life depends on the complete circuit load, sensor current, converter efficiency, and whether the amplifiers operate continuously.

Données de référence d'ingénierie pour LT1014ISW — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the LT1014ISW when a design needs four precision op amps with low offset, low drift, high CMRR, high PSRR, and low supply current. It is particularly appropriate for strain gauges, thermocouples, active filters, threshold detection, and 4 mA-to-20 mA current-loop circuitry operated from a single 5 V rail. Select LT1014DSW, LT1014DDW, or LT1014DIDWR when the required temperature grade and ordering suffix match the design while retaining the 16-SO LT1014 family. Consider TLE2144CDWR only after checking noise, slew rate, frequency response, supply limits, and offset behavior against the instrumentation error budget. LM324ADR and MC3403DR are practical when four channels are needed but precision offset, drift, and rejection are not critical. For any substitution, verify the manufacturer ordering information and pin-description table rather than relying on package appearance alone.

Comparaison avec les alternatives

Paramètre Ce produit LT1014DSW LT1014DDW LT1014DIDWR TLE2144CDWR
Brand Analog Devices Analog Devices Analog Devices Analog Devices Texas Instruments
Package 16-SO 16-SO 16-SO 16-SO 16-SO
Amplifier Count 4 amplifiers 4 amplifiers 4 amplifiers 4 amplifiers 4 amplifiers

Principaux différenciateurs

  • Established LT1014 precision characteristics (vs TLE2144CDWR)
  • Four precision amplifiers in one compact package (vs LM2902N/PB)
  • Low-power single-supply operation (vs LM324ADR)

Notes de conception

Place the supply bypass capacitors immediately adjacent to the positive and negative supply pins, and keep the high-impedance input nodes away from switching nodes and long copper traces. For strain-gauge, thermocouple, and current-loop inputs, use guarding, clean insulation, and leakage-controlled board materials. The LT1014’s low current noise can be undermined if PCB contamination or humidity creates a leakage path comparable to the sensor source impedance.

Do not treat the single-supply input range extending to ground as permission for input voltages outside the absolute-maximum limits. Check the common-mode range across temperature, verify output swing under the expected load, and include adequate supply headroom for transient overshoot. Also account for input bias current when working with high source impedances; low voltage noise alone does not guarantee low total measurement error.

Use matched feedback resistors when multiple channels require consistent gain, and calculate resistor noise and thermal drift as part of the overall precision budget. The amplifier’s 50 µV maximum offset and 0.3 µV/°C drift are meaningful, but they do not remove errors caused by unequal resistor ratios, thermocouple junctions, or input bias current. Stable reference and compensation networks are especially important in precision instrumentation and current-loop transmitters.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was included in the cited product information. AEC-Q100 status is not applicable because this is an analog operational amplifier rather than an automotive-qualified device.

Données vérifiées le : 2026-11-14 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

lt1014isw pbf lt1014isw trpbf lt1014isw datasheet LT1014ISW datasheet pdf LT1014ISW pinout LT1014ISW equivalent LT1014ISW replacement LT1014ISW vs TLE2144CDWR LT1014ISW 16-SO footprint LT1014ISW precision op amp LT1014ISW single supply LT1014ISW application circuit Analog Devices LT1014ISW LT1014ISW price LT1014ISW stock

Composants & termes associés

Analog Devices LT1014ISW LT1014DSW LT1014DDW LT1014DIDWR TLE2144CDWR LT1013/LT1014 quad precision operational amplifier precision op amp voltage-feedback amplifier analog signal conditioning semiconductor 16-lead SOIC SOIC package family surface mount input offset voltage input offset drift common-mode rejection ratio power-supply rejection ratio low-voltage noise input current noise strain-gauge signal conditioner thermocouple amplifier 4 mA to 20 mA current-loop transmitter active filter
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ