Analog Devices

LTC1064CJ - Quad Universal Filter Building Block | Analog Devices

Référence : LTC1064CJ ✓ Actif
CDIP-24 Package 140 kHz Speed
MOQ : 1 |

LTC1064CJ Présentation

The Analog Devices LTC1064CJ is a low-noise, fast, quad universal switched-capacitor filter building block rated for a 140 kHz switched frequency and supplied in a 24-pin CDIP package. It combines four high-speed filter sections with a universal architecture capable of implementing low-pass, high-pass, band-pass, band-stop, and other second-order responses.

A switched-capacitor active filter is an analog filter that uses periodically switched capacitors and an external clock to create frequency-dependent behavior equivalent to resistive-capacitive networks. The LTC1064 belongs to the active-filter category, which is part of the broader signal-conditioning IC hierarchy for analog and mixed-signal systems. Its four building blocks can implement multiple second-order filter functions when paired with an external clock and three to five external resistors.

The four independently usable sections provide a practical way to build multichannel signal conditioning without requiring four separate monolithic filter packages. Low noise is valuable when processing weak sensor, audio, communications, or instrumentation signals, while the fast 140 kHz switching capability allows the device to cover a broad range of timing and frequency-response requirements. An external clock gives the system designer control over the switched-capacitor operating rate and filter response.

Each building block uses switched-capacitor techniques to establish its frequency response, but practical performance also depends on the external clock, resistor tolerances, capacitor selection, grounding, and the bandwidth of the signals being filtered. Because the architecture is universal, component values and topology determine whether a section performs low-pass, high-pass, band-pass, band-stop, or another supported second-order function. The four sections can also be combined for higher-order filtering when one section alone does not provide the required attenuation or roll-off.

Typical uses include antialiasing before switched-capacitor data converters, low-noise analog measurement chains, audio signal conditioning, communication-channel filtering, waveform shaping, and general-purpose active filtering. In a multichannel system, identical clocking and closely matched external networks can produce consistent channel behavior, although each section still requires careful component selection and layout.

For reliable implementation, follow the manufacturer datasheet for clock levels, resistor networks, bypass capacitance, grounding, and allowable signal amplitudes. Keep clock routing away from sensitive analog inputs, use a low-noise ground reference, and place filter components close to their associated pins. Validate gain, cutoff frequency, and stopband attenuation with the actual clock and source impedance rather than relying only on nominal calculations.

This page combines the manufacturer product information, package and operating characteristics, practical filter-design guidance, sourcing information, and verified drop-in replacement findings. It is designed to help engineers identify the correct LTC1064CJ ordering code, plan a working filter, and assess replacement options without treating merely similar filter ICs as PCB-compatible substitutes.

Alternatives de remplacement direct pour LTC1064CJ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

LTC1064MJ

✅ Remplacement direct
📦 24-pin DIP
Related LTC1064 family grade; exact temperature-range and electrical differences require comparison, with core filter ratings otherwise aligned at approximately 90%

📋 Alternative de référence (hors catalogue)

LTC1064CJ Valeurs maximales et caractéristiques électriques

Product Type Quad universal filter building block
Number of Filter Sections 4 sections
Filter Architecture Switched-capacitor active filter
Supported Response Functions Low-pass, high-pass, band-pass, band-stop, and other second-order functions
Switched Frequency 140 kHz
Noise Characteristic Low noise
Speed Characteristic Fast
External Clock Requirement External clock required
External Resistors per Section 3 to 5 resistors
Orderable Response Type Universal
Boîtier CDIP-24
Total Pin or Terminal Count 24 terminals
Terminal Form Through-hole
Temperature Grade Industrial
Production Status Production

Guide de configuration des broches du LTC1064CJ cdip-24

Configuration des broches du LTC1064CJ (boîtier cdip-24). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier cdip-24 pour le LTC1064CJ

Aucune donnée de brochage détaillée disponible pour LTC1064CJ.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

LTC1064CJ convient pour 6 applications: Antialiasing Filter for Data Converters, Low-Noise Instrumentation Signal Conditioning, Audio Band-Limiting and Equalization, Communication Channel Filtering, Waveform Shaping and Band-Stop Filtering, Multichannel Sensor Interface.

⚡

Antialiasing Filter for Data Converters

The LTC1064CJ suits antialiasing ahead of switched-capacitor data converters because each of its four universal sections can implement a second-order response with an external clock and three to five resistors. Configure low-pass sections according to the converter sampling architecture, then validate attenuation near Nyquist and stopband behavior with the actual clock and source impedance. The 140 kHz switched frequency supports filter timing above many low-rate converter applications, while the low-noise characteristic helps preserve weak analog signals before digitization.

🏭

Low-Noise Instrumentation Signal Conditioning

The LTC1064CJ is appropriate for instrumentation chains where sensor outputs require controlled band-limiting before amplification or measurement. Four low-noise universal sections can process multiple channels or cascade sections to obtain higher-order attenuation. Set cutoff frequency and gain through the external resistor networks, maintain a quiet ground reference, and use matched components when comparing channels. Because the switched-capacitor architecture accepts an external clock, designers can align filter operating conditions with the rest of the measurement system.

🎧

Audio Band-Limiting and Equalization

The LTC1064CJ can implement programmable-by-component low-pass, high-pass, band-pass, or band-stop sections for audio and communications signal conditioning. Its four independent sections allow several filter functions to coexist in one 24-pin CDIP package, reducing the number of separate active-filter packages. The low-noise architecture is useful when weak audio paths require filtering without adding unnecessary broadband noise. Verify audible-band attenuation, distortion, clock feedthrough, and stable passband response in the final analog layout.

🌐

Communication Channel Filtering

The LTC1064CJ is well suited to communication-channel filtering where multiple second-order stages define the occupied bandwidth and reject out-of-band energy. Four sections can each implement a different response or be combined for steeper attenuation. The external clock establishes the switched-capacitor operating condition, while three to five external resistors per section determine the frequency-selective network. Keep the clock away from sensitive inputs and account for source impedance, because both influence practical response and component selection.

🔧

Waveform Shaping and Band-Stop Filtering

The LTC1064CJ can create band-stop or other second-order responses for removing unwanted tones, harmonics, or out-of-band interference from an analog waveform. Each universal section can be configured separately, allowing one package to perform different shaping functions on multiple related signals. Confirm the required clock frequency and external network against the Analog Devices design guidance. Component tolerance and parasitic capacitance should be included in simulation because they can shift the realized cutoff frequency and attenuation.

🧩

Multichannel Sensor Interface

The LTC1064CJ supports multichannel sensor interfaces that require consistent filtering before conversion or control. Four universal building blocks can filter four inputs, or sections can be combined where one channel needs greater roll-off. Use a common clock and closely matched external networks when channel matching matters. The through-hole 24-pin CDIP package also supports conventional plated-through-hole PCB construction, while the low-noise characteristic helps preserve signals from sensitive sensor front ends.

What is the LTC1064CJ?
The LTC1064CJ is a production quad universal switched-capacitor filter building block from Analog Devices. It contains four high-speed, low-noise filter sections that can implement second-order low-pass, high-pass, band-pass, band-stop, and other responses using an external clock and three to five resistors per section. According to the Analog Devices LTC1064 product page, it is supplied in a 24-pin CDIP package.
What are the key specifications of LTC1064CJ that engineers should know?
The LTC1064CJ provides four universal switched-capacitor filter sections, a 140 kHz switched frequency, low-noise operation, and an industrial temperature grade in a through-hole CDIP-24 package. Each section requires an external clock and three to five resistors to establish its response. The Analog Devices product page identifies the device as a production part, supporting its use in new long-lived analog signal-processing designs.
Where can I download the LTC1064CJ datasheet PDF?
The official LTC1064CJ documentation is available through the Analog Devices LTC1064 product page at https://www.analog.com/en/products/ltc1064.html. Select the device documentation there to obtain the manufacturer datasheet. The web listing also identifies the document as 16 pages, while another indexed copy reports 20 pages; use the PDF linked by Analog Devices as the controlling technical document for pin assignments, clock requirements, and filter-design equations.
Where can I find the LTC1064CJ pinout?
The LTC1064CJ pinout is documented in the Analog Devices manufacturer datasheet linked from the LTC1064 product page. The device uses a 24-pin CDIP outline with through-hole terminals, but the individual terminal names and functions are not included in the product-page excerpt. Use the pin-description table and package drawing in the official datasheet before assigning PCB tracks or designing the external resistor networks.
How is the LTC1064CJ used as a universal filter?
The LTC1064CJ implements each filter section with an external clock and a network of three to five resistors. Changing the selected topology and component values changes the response from low-pass to high-pass, band-pass, band-stop, or another supported second-order function. According to the Analog Devices product overview, all four sections are switched-capacitor building blocks that can be configured independently for multichannel filtering.
What clock and layout practices are important for the LTC1064CJ?
The LTC1064CJ should receive a clean, stable external clock, and the clock trace should be kept away from sensitive analog inputs to reduce coupling into the filter response. Place external networks close to their associated terminals and maintain a low-impedance, low-noise ground reference. The exact clock amplitude, frequency limits, bypass requirements, and board connections should be confirmed in the Analog Devices LTC1064 datasheet before fabrication.
Where can I buy LTC1064CJ online?
Use the Request a Quote form on this page to request LTC1064CJ pricing, current availability, and lead time from XAIPART. The manufacturer product page identifies the LTC1064 family as being in production, but current channel inventory and delivery schedules can change by package code and order quantity. Providing the exact MPN, LTC1064CJ, helps prevent confusion with other package or temperature-grade variants.
What is the price of LTC1064CJ?
The current LTC1064CJ price is obtained through the Request a Quote form on this page. No qualifying quantity-break price table for the exact LTC1064CJ ordering code appears in the verified product listings, so this page does not reproduce a potentially stale unit price. The form can provide a quotation based on requested quantity, package code, delivery location, and production requirements.
What is the lead time for LTC1064CJ?
The current LTC1064CJ lead time is available through the Request a Quote form on this page. Analog Devices identifies the LTC1064 as a production family, which supports ongoing sourcing, but manufacturing capacity and inventory can vary by order quantity. Request a written quotation that states the confirmed lead time and shipment plan for the exact LTC1064CJ package code.
Is LTC1064CJ in stock?
Stock for the exact LTC1064CJ ordering code is confirmed through the Request a Quote form on this page. The manufacturer lists the LTC1064 family as production, while distributor records can fluctuate as inventory is allocated. When requesting availability, specify the required quantity and delivery destination so the response can reflect a usable allocation rather than a generic family-level status.
What is the difference between the LTC1064 and LTC1064CJ?
The LTC1064 identifies the filter family, while LTC1064CJ identifies a specific ordering code within that family, including its package and temperature-grade configuration. The listed LTC1064CJ version is an industrial-grade, 24-terminal, through-hole CDIP part. Because the family description does not enumerate every suffix distinction, use the manufacturer order guide for a definitive comparison against other LTC1064 variants.
When should I choose the LTC1064CJ over another active-filter approach?
Choose the LTC1064CJ when a design needs four independently configurable switched-capacitor filter sections, low-noise operation, and a 140 kHz switched-frequency capability. It is particularly useful for multichannel analog conditioning where separate second-order responses are required. Passive RC networks may be preferable at very low frequencies, while a dedicated continuous-time filter may be easier when very low clock noise or high-frequency performance dominates.
Is LTC1064CJ suitable for multichannel measurement systems?
The LTC1064CJ is suitable for multichannel measurement systems because it contains four universal filter building blocks in one 24-pin package. Each channel can use an external clock and three to five resistors to establish the required second-order response. For closely matched channels, use identical component networks, consistent clocking, and symmetrical layout, then verify channel-to-channel gain and phase at the operating bandwidth.
What can replace LTC1064CJ?
A true drop-in replacement for LTC1064CJ must use the same 24-pin CDIP footprint, provide pin-to-pin compatibility, and preserve the required switched-capacitor filter functions, clock behavior, and electrical limits. No verified cross-reference identifies such a replacement for this ordering code. Do not substitute a merely similar filter IC unless its manufacturer explicitly confirms the footprint, pinout, clock range, and external component network are unchanged.
What is the best Analog Devices equivalent for LTC1064CJ?
The LTC1064CJ is itself the exact Analog Devices ordering code for a low-noise, fast, quad universal filter building block. Other LTC1064 suffix codes may differ in package, temperature grade, or orderable configuration and should not be assumed to be interchangeable. For an exact Analog Devices alternative, compare the order guide and datasheet package drawing, then confirm every terminal function and production status.

Données de référence d'ingénierie pour LTC1064CJ — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the LTC1064CJ when the design needs four independently configurable, low-noise switched-capacitor filter sections in a through-hole 24-pin CDIP package. Its universal architecture is particularly useful for low-pass, high-pass, band-pass, and band-stop implementations, with an external clock and three to five resistors per section. Choose a passive RC network instead when low cost, simplicity, or operation below the switched-capacitor range dominates. Choose a dedicated continuous-time active filter when clock feedthrough, very low noise, or high-frequency performance is more important than integration and configurable second-order responses. Before ordering any replacement, verify the package drawing, terminal assignments, supported clock range, supply limits, and external component network. No drop-in substitute was confirmed by the available cross-reference information, so an engineering exchange requires manufacturer documentation rather than similarity-based selection.

Notes de conception

Route the external clock away from filter inputs, resistor-network nodes, and other high-impedance analog traces to minimize coupling into the stopped band. Place each filter network close to the pins it serves, use a common low-impedance ground reference, and keep ground returns short. Confirm the package-specific pin arrangement and recommended grounding topology against the manufacturer datasheet before releasing the PCB layout.

The switched-capacitor response depends on clock quality, source impedance, external resistor accuracy, and stray capacitance. Simulate the complete source and load network, then measure gain, cutoff frequency, stopband attenuation, and clock feedthrough in hardware. When comparing channels, use identical external values and layout symmetry to reduce gain and phase mismatches between the four sections.

Do not treat the four building blocks as four fixed low-pass filters. Each section requires the correct external topology, clock connection, and three to five resistors to implement the intended response. Also avoid selecting another LTC1064 suffix solely by its generic family description, because package and temperature-grade differences can prevent a direct substitution. Validate the exact ordering code and every terminal assignment.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The LTC1064 family is listed as a production product, but no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration for the exact LTC1064CJ ordering code appears in the verified product information.

Recherches associées

LTC1064CJ datasheet LTC1064CJ datasheet pdf LTC1064CJ pinout LTC1064CJ schematic LTC1064CJ specifications LTC1064CJ equivalent LTC1064CJ replacement LTC1064CJ cross reference LTC1064CJ price Analog Devices LTC1064CJ LTC1064CJ CDIP-24 filter LTC1064CJ 140kHz filter

Composants & termes associés

Analog Devices LTC1064 LTC1064CJ Linear Technology quad universal filter switched-capacitor filter active filter analog filter signal-conditioning IC mixed-signal IC low-noise filter 140 kHz switched frequency external clock CDIP-24 through-hole package low-pass filter high-pass filter band-pass filter band-stop filter second-order filter antialiasing filter instrumentation signal conditioning industrial temperature grade RoHS REACH
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ