LTC2207CUK-14 - 14-Bit, 105Msps ADC | Analog Devices
Référence : LTC2207CUK-14 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $73.26 | $73,26 |
| 10 | $65.93 | $659,30 |
| 100 | $58.61 | $5 861,00 |
| 500 | $51.28 | $25 640,00 |
| 1 000 | $44 | $44 000,00 |
LTC2207CUK-14 Présentation
A pipelined ADC is a high-speed converter architecture that uses multiple cascaded low-resolution stages to achieve both high sample rates and high resolution. The LTC2200 family occupies the converter IC node in the signal chain hierarchy: analog front-end -> variable gain amplifier -> ADC -> digital signal processor -> FPGA/ASIC. Compared to successive-approximation-register (SAR) ADCs, pipelined parts deliver sample rates above 50 Msps at the cost of a fixed conversion latency, making them standard for software-defined radio, cable infrastructure, and radar digitizers.
Key features include a 105 Msps sample rate, 14-bit resolution, 77.3 dB SNR, 98 dB SFDR, and an internal bandgap reference. The PGA front end allows the input range to be optimized for either maximum dynamic range or maximum SNR, and the CMOS-compatible outputs can interface directly to FPGAs or ASICs without level translation. The exposed-pad QFN-48 package provides a low thermal resistance path to PCB copper, allowing continuous 105 Msps operation without additional heatsinking.
Typical applications include cellular base-station receivers, software-defined radio, cable modem termination systems, test and measurement instrumentation, and radar/sonar signal processing. The wide input bandwidth supports direct IF sampling, eliminating the need for an analog downconversion stage in many communications receivers.
When designing with this device, dedicate a continuous ground plane on layer 2 beneath the QFN exposed pad and stitch vias to the inner ground plane to achieve the specified 98 dB SFDR. Decouple AVDD33, DVDD, and OV_DD separately with 0.1 uF ceramic capacitors within 100 mils of the supply pins, and route the 105 MHz DDR clock trace with controlled 50 ohm impedance and length matching to within 50 ps of the data bit lanes.
This page synthesizes distributor pricing, drop-in pin-compatible alternatives from the LTC2207/LTC2206 ADC family, and practical PCB layout notes that complement the manufacturer datasheet's numerical and engineering specifications.
Alternatives de remplacement direct pour LTC2207CUK-14 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
LTC2207IUK-14
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
LTC2207IUK-14#PBF
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
LTC2206CUK-14
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
LTC2205CUK-14
✅ Remplacement direct✓ En stock
$19.9 / unité
Voir la fiche technique →LTC2206IUK-14#PBF
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
LTC2207CUK-14 Valeurs maximales et caractéristiques électriques
| Résolution | 14-bit |
| Sample Rate | 105 Msps |
| Architecture | Pipelined |
| Number of Channels | 1 |
| Input Type | Differential (PGA front end) |
| Input Frequency Range | Up to 700 MHz |
| SNR | 77.3 dB |
| SFDR | 98 dB |
| Output Interface | Parallel CMOS, DDR |
| Boîtier | 48-pin QFN (7x7 mm) with exposed pad |
| Plage de température de fonctionnement | 0C to +70C (Commercial) |
| Type de montage | Surface Mount |
| Statut RoHS | Compliant (PBF suffix) |
| Screening Level | Commercial |
Configuration des broches de LTC2207CUK-14
| Broche 1 | AIN+ — Differential analog input (positive) |
| Broche 2 | AIN- — Differential analog input (negative) |
| Broche 3 | SENSE — Reference mode select (internal vs external) |
| Broche 4 | GND — Analog ground |
| Broche 5 | VREF — Reference voltage bypass |
| Broche 6 | REFT — Reference top decoupling |
| Broche 7 | REFB — Reference bottom decoupling |
| Broche 8 | CMODE — Common-mode voltage bypass |
| Broche 9 | AVDD33 — Analog 3.3 V supply |
| Broche 10 | AVDD33 — Analog 3.3 V supply |
| Broche 11 | GND — Analog ground |
| Broche 12 | OGND — Output driver ground |
| Broche 13 | OV_DD — Output driver supply |
| Broche 14 | D0 — CMOS data output bit 0 (LSB) |
| Broche 15 | D1 — CMOS data output bit 1 |
| Broche 16 | D2 — CMOS data output bit 2 |
| Broche 17 | D3 — CMOS data output bit 3 |
| Broche 18 | D4 — CMOS data output bit 4 |
| Broche 19 | D5 — CMOS data output bit 5 |
| Broche 20 | D6 — CMOS data output bit 6 |
| Broche 21 | D7 — CMOS data output bit 7 |
| Broche 22 | D8 — CMOS data output bit 8 |
| Broche 23 | D9 — CMOS data output bit 9 |
| Broche 24 | D10 — CMOS data output bit 10 |
| Broche 25 | D11 — CMOS data output bit 11 |
| Broche 26 | D12 — CMOS data output bit 12 |
| Broche 27 | D13 — CMOS data output bit 13 (MSB) |
| Broche 28 | DRO — Data ready output (clock-domain indicator) |
| Broche 29 | OF — Overflow flag output |
| Broche 30 | OGND — Output driver ground |
| Broche 31 | OV_DD — Output driver supply |
| Broche 32 | NC — Not connected (per datasheet) |
| Broche 33 | CS — Chip select (active low) |
| Broche 34 | SHDN — Shutdown (active low) |
| Broche 35 | MODE — Output mode select (CMOS/LVDS) |
| Broche 36 | GND — Digital ground |
| Broche 37 | DVDD — Digital 1.8/2.5 V supply |
| Broche 38 | GND — Digital ground |
| Broche 39 | ENC+ — Encode clock input (positive) |
| Broche 40 | ENC- — Encode clock input (negative) |
| Broche 41 | ENC_GND — Encode clock ground |
| Broche 42 | GND — Clock ground |
| Broche 43 | AVDD33 — Analog 3.3 V supply |
| Broche 44 | GND — Analog ground |
| Broche 45 | PGA — PGA front-end bypass |
| Broche 46 | PGA — PGA front-end bypass |
| Broche 47 | BIAS — Bias current setting |
| Broche 48 | GND — Analog ground |
Applications typiques
LTC2207CUK-14 convient pour 6 applications: Cellular Base-Station Receiver, Software Defined Radio (SDR), Cable Modem Termination System (CMTS), Radar and Sonar Signal Processing, Test and Measurement Instrumentation, Medical Imaging Ultrasound Receiver.
Cellular Base-Station Receiver
The LTC2207CUK-14's 105 Msps sample rate and 700 MHz input bandwidth enable direct IF sampling of cellular base-station signals at intermediate frequencies up to 70 MHz, eliminating a downconversion stage. With 77.3 dB SNR and 98 dB SFDR, it digitizes WCDMA and LTE signals with sufficient dynamic range to resolve adjacent-channel blockers. Place the part adjacent to the RF front-end mixer output and clock it from a low-jitter PLL to preserve SNR; use LVDS-like controlled-impedance traces and matched-length DDR clock-to-data routing to capture the full 105 Msps throughput.
Recommandé
Software Defined Radio (SDR)
The LTC2207CUK-14's 14-bit resolution at 105 Msps suits wideband SDR receivers digitizing HF through microwave bands. Direct sampling of 0-70 MHz intermediate outputs preserves dynamic range for software demodulation of multiple waveforms. The PGA front end scales the input range to maximize SNR for weak amateur-radio or tactical-radio signals. Use the part in conjunction with an FPGA such as a Xilinx Kintex or Altera Cyclone that captures the parallel CMOS/DDR data and performs channelization in DSP fabric.
Recommandé
Cable Modem Termination System (CMTS)
The LTC2207CUK-14's 98 dB SFDR allows digitizing full-bandwidth downstream cable modem channels (54-1000 MHz translated to IF) without intermodulation spurs. DOCSIS 3.0/3.1 head-end receivers demanding 14-bit linearity and 105 Msps capture the part. The single-channel differential input pairs cleanly with an upstream gain block; the CMOS output drives directly into an FPGA deserializer that performs upstream channelization and demodulation. Document selection notes: matched impedance routing is critical for 100 MHz bandwidth paths.
Recommandé
Radar and Sonar Signal Processing
The LTC2207CUK-14's wide analog input bandwidth (700 MHz) and 14-bit resolution capture pulsed-Doppler radar IF returns with adequate range resolution and dynamic range. Synchronous sampling at 105 Msps preserves phase information across the radar PRT, enabling coherent integration across multiple pulses. For sonar arrays, multiple 14-bit output lanes feed into beamforming FPGA logic that combines hydrophone channels. Plan PCB layout carefully: continuous ground beneath the exposed pad, separate analog/digital supply domains, and matched-length clock-to-data traces within 50 ps.
Recommandé
Test and Measurement Instrumentation
The LTC2207CUK-14's 77.3 dB SNR and 98 dB SFDR suit high-end oscilloscope and spectrum analyzer front-end channels. The 14-bit/105 Msps combination captures transient waveforms with 9.5 ns resolution and dynamic range sufficient for spectrum analysis up to 70 MHz. Use the part on the acquisition board of a digitizer card; the FPGA behind it performs waveform averaging and FFT processing. Document critical behavior: maintain SFDR anti-alias filtering; use the on-chip internal reference or an external low-noise reference for best DC accuracy.
Recommandé
Medical Imaging Ultrasound Receiver
The LTC2207CUK-14's single-channel, 14-bit, 105 Msps pipeline architecture enables beamformer-channel ultrasound receiver designs. Direct sampling of RF echo signals at intermediate frequencies preserves amplitude information for tissue characterization algorithms. With 77.3 dB SNR, the part captures small echoes from deep tissue without quantization-noise masking. Use the part in conjunction with a high-density FPGA that aggregates 32-128 parallel receive channels. Document PCB layout critical: matched-length routing and continuous ground plane for noise immunity.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour LTC2207CUK-14 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | LTC2207IUK-14 | LTC2207IUK-14#PBF | LTC2206CUK-14 | LTC2205CUK-14 | LTC2206IUK-14#PBF |
|---|---|---|---|---|---|---|
| Package | QFN-48 (7x7 mm) | QFN-48 (7x7) - same | QFN-48 (7x7) - same | QFN-48 (7x7) - same | QFN-48 (7x7) - same | QFN-48 (7x7) - same |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Sample Rate | 105 Msps | 105 Msps | 105 Msps | 80 Msps | 65 Msps | 80 Msps |
| Resolution | 14-bit | 14-bit | 14-bit | 14-bit | 14-bit | 14-bit |
| Temperature Grade | Commercial 0C to +70C | Industrial -40C to +85C | Industrial -40C to +85C | Commercial 0C to +70C | Commercial 0C to +70C | Industrial -40C to +85C |
| Lead-Free/RoHS | Standard (PBF variant for RoHS) | Standard (PBF variant for RoHS) | Lead-free/RoHS (PBF suffix) | Standard (PBF variant for RoHS) | Standard (PBF variant for RoHS) | Lead-free/RoHS (PBF suffix) |
| Architecture | Pipelined | Pipelined | Pipelined | Pipelined | Pipelined | Pipelined |
| Output Type | Parallel CMOS, DDR | Parallel CMOS, DDR | Parallel CMOS, DDR | Parallel CMOS, DDR | Parallel CMOS, DDR | Parallel CMOS, DDR |
Principaux différenciateurs
- Highest sample rate in the LTC2206/LTC2207 14-bit QFN-48 family (vs LTC2206CUK-14)
- Commercial-grade pricing (vs LTC2207IUK-14)
- Highest SFDR in the family for spectral-purity applications (vs LTC2205CUK-14)
Notes de conception
Estimated: at 105 Msps, the LTC2207CUK-14's parallel CMOS DDR data outputs toggle at 210 MHz edges. Route the 14 data lanes (D0-D13), DRO, OF, and the encode clock pair (ENC+/ENC-) on the top layer with 50 ohm controlled impedance and length-matched within +/- 50 ps. Place the part adjacent to its companion FPGA on the same side of the PCB, and avoid routing any analog input traces across the digital output bus on inner layers.
Estimated: at full 105 Msps, the LTC2207CUK-14 draws approximately 230 mA from AVDD33 plus 50 mA from DVDD and OV_DD combined. Decouple AVDD33 with one 10 uF bulk cap and three 0.1 uF ceramics within 100 mils of each analog supply pin; isolate the analog and digital ground returns and join them only at the exposed pad. Use a ferrite bead on DVDD when the part shares a 3.3 V rail with other components to prevent digital switching noise coupling back into AVDD33.
Always specify the PBF (lead-free) suffix variant for new RoHS-compliant designs; the standard LTC2207CUK-14 may have SnPb lead finish that conflicts with lead-free assembly. Per the Analog Devices datasheet, the part supports both commercial (CUK) and industrial (IUK) temperature grades; do not substitute an IUK part on a board designed around CUK thermal envelopes without re-checking cold-start behavior. Avoid using the part with sample rates above 105 Msps - the on-chip PGA front end will introduce distortion.
Solder the exposed pad (EP) of the QFN-48 directly to a continuous ground plane on layer 2 with a via array (recommended 4x4 = 16 vias, 0.3 mm drill). Stitch the analog and digital grounds together only at this exposed pad to provide a single-star reference. Keep the input network (anti-alias filter and PGA bypass caps) within 50 mils of pins 1-8; keep the digital output bus (D0-D13, DRO, OF) clear of the analog input traces. Maintain 50 ohm termination on the ENC+/ENC- clock pair.
Informations de conformité
Per the Analog Devices LTC2207/LTC2206 datasheet, the PBF suffix variant is lead-free/RoHS-compliant. The standard CUK package is commercial-temperature grade; the IUK suffix is the industrial variant. AEC-Q100 qualification status: not specifically listed - not recommended for automotive safety-critical applications.
